Commit Graph
55 Commits
Author SHA1 Message Date
Mr. Error 21e9e690ae feat(portal): follow the viewer's mouse mode with the embedded cursor (#203)
* feat(portal): follow the viewer's mouse mode with the embedded cursor

The portal stream hides the compositor cursor. A viewer that drives the pointer
with relative motion (UU's controlled-end mouse, also the Mac trackpad mode)
has no absolute position to draw its own pointer at, and the game's cursor
never reaches the picture, so the mouse can be moved and clicked but not seen.

Request cursor_mode=embedded while relative motion arrives, and keep it hidden
while absolute motion arrives: there the viewer draws its own pointer and an
embedded copy would trail it. The portal reads cursor_mode only when the
session is created, so switch by rebuilding the session with the saved consent,
the same path the privacy screen uses. A run has to last five events and 200 ms
before it counts, so a burst at connect or an alternating controller does not
rebuild; a failed rebuild backs off for five seconds.

The rebuilt session is checked against the monitor the previous one captured,
so a restored consent cannot silently move the share. The engine keeps the mode
for later opens (recovery, privacy, monitor switches) and skips the switch when
an older libuu-portal.so lacks uu_portal_set_cursor_mode.

UU_PORTAL_CURSOR_MODE=embedded sets the startup default.

* fix(portal): keep the cursor rebuild off locks and held input

Do not rebuild while the desktop is locked, and cancel an open that is already
waiting when it locks: GNOME closes the portal session on lock, so the request
would wait for consent that cannot be answered while holding `recovery`
against the post-unlock recovery.

Keys and buttons held through the portal input path are dropped when the
session is replaced, so wait for their release. Monitor selection takes the
same `recovery` lock, so it cannot install a stale source over the cursor
rebuild or the other way round, and the rebuilt session is revalidated against
the source it started from.

* fix(portal): carry the clipboard across cursor rebuilds

The engine keeps the viewer's text only in the session that provided it, and
the host re-sends it only for a new viewer update. A replacement session
therefore had no clipboard ownership, so changing the mouse mode made
previously synchronized text unpasteable until the viewer sent it again.

Offer the text to the replacement before the old session closes, but only
while that session still owns the selection: a local copy that has taken the
clipboard since is left alone. Touch consent upgrades replace the handle too,
so they take the same `recovery` lock as recovery, monitor selection and the
cursor rebuild and cannot install a handle opened under an older cursor mode.

* fix(portal): serialize clipboard writes with the cursor swap

The clipboard bridge calls clipboard_set from its own thread. Installing the
replacement handle and then carrying the old text over left a window where an
update could land on the new session and be overwritten by the older text,
with no pending update left to restore it.

Take a clipboard write lock before the handle is installed and hold it until
the carry-over finishes; clipboard_set takes the same lock. A write that
starts before the swap is included in the text carried over, a write that
starts after waits and wins.

* fix(portal): cancel a waiting rebuild when the desktop ends

The desktop ends its share when the last controller leaves (end_idle), but an
open that is still waiting for consent is not the installed handle, so it
survived that shutdown and installed a live share afterwards.

Bump an end generation in Session::end(), snapshot it before the open, and
cancel the request when it moves. The generation is checked again under the
handle lock before installing, so an end that races the swap either aborts
the rebuild or ends the handle it just installed.

* fix(portal): keep session swaps consistent with the viewer's state

Addresses the ownership race reported on the previous commit and the paths
that share its failure mode.

uu_portal_clipboard_set publishes the new text before SetSelection so a
transfer during the call serves it, restores the old text when the call fails,
and ignores a stale revision so a newer owner wins. The engine reports the
cursor mode it actually requested and the modes the backend advertised; the
host follows that instead of assuming the request was applied and stops
retrying where an embedded cursor is unavailable. The end generation is
sampled before the rebuild queues for `recovery`, a rebuild refuses to start
while the session is no longer alive, and cancellation now covers virtual
output opens.

Portal-bound keys and buttons are tracked separately, so an input held through
the portal defers the swap on every routing path, and the check is repeated
after the open. Every handle replacement (privacy screen, monitor switch,
touch consent, recovery after lock or stream loss) carries the viewer's
clipboard under the clipboard write lock, and the rebuilt session is checked
against the captured geometry.

* fix(portal): stop the swap bookkeeping from outliving a deferred rebuild

open_inner publishes the replacement's cursor mode before the swap. When held
input defers the rebuild, that session is never installed, so the host belief
described the discarded handle and later motion looked like it already matched.
Restore the belief from the installed session on every abort path.

The extra portal releases in release_held now stop at the first failure like
the sweep above; with a dead portal bus each remaining input waited out the
three-second timeout while the input and desktop-owner locks were held.

* fix(portal): invalidate clipboard ownership when a session ends

A closed session stops receiving owner changes, so a cached clipboard_owns
survived into the recovery paths and could republish old viewer text over a
newer local copy. Clear the claim in uu_portal_end and the Closed handler, and
let uu_portal_clipboard_copy refuse a source that is no longer alive.

Mark the embedded cursor unavailable when the engine did not apply it: with
AvailableCursorModes unreadable the session opens hidden, and retrying on every
motion run rebuilt it every 200 ms without changing the mode.

* fix(portal): retire held portal input when the devices are replaced

A key or button held through the native portal path is recorded when its
injection succeeds. If the session dies first, the key-up fails and the record
survives; recovery then installs new devices while the tracker still says an
input is held, so pointer-mode detection keeps deferring.

Keep the tracker in module state and clear it whenever the portal replaces or
ends its devices: the rebuild, both recovery paths and Session::end.

* fix(portal): scope held-input retirement to the retired handle

A press delivered to the replacement after the swap could be recorded while
the old handle was still being retired, and the unconditional reset then
deleted it. Hold the recording lock from before the swap until the reset
finishes, so only inputs sent to the retired devices are dropped.

A portal touchscreen contact was not tracked at all: the swap retired the
active contact while TouchDrag stayed down, so the following move reached a
session that never saw the press. Track contact down/up and include it in the
deferral state.

* fix(portal): serialize touch injection with handle replacement

inject_touch wrote the contact state outside the recording lock the handle
swap holds, so a contact delivered to the replacement between the swap and the
reset could be cleared, and the following phase-1 would fail on new devices
that never saw the press. Take the same lock across the injection and the
state update.

* fix(portal): decide the swap under the held-input lock

The final held-input check ran before install_replacement() took the serial
lock, so an input could be injected and recorded against the old handle while
the install waited for the clipboard lock. The install then retired the
records and swapped, destroying a contact the new devices never saw. Repeat
the check under the serial lock that recording uses, and defer the rebuild
when it hits.

* fix(portal): hold the input lock across native injection, refresh privacy geometry

inject_button and inject_key injected through the portal and only took the
recording lock afterwards, so a swap could take the lock, see no held input
and replace the devices that had just received the press. Take the serial lock
across the injection and its record, as the touch path does; the record
helpers no longer take it themselves.

A cursor rebuild that replaces the privacy virtual output invalidates the
cached pointer region: recompute it from the settled layout so absolute input
keeps landing inside the captured share.
2026-11-09 08:36:37 +08:00
Jeff Zhang 2dd3280b7e perf(inproc): replace portal pseudo-polling with event-driven frame wait (#193)
* perf(portal): wait for frames without polling

* fix(portal): use monotonic clock for condition variable wait deadline

* fix(portal): compute wait_for_first_frame deadline with monotonic clock
2026-11-06 10:41:21 +08:00
Jeff Zhang c60d9f1bfa perf: HEVC RTP 分包零拷贝子切片与 X11 终端检测 100ms 缓存 (#182)
* perf: HEVC RTP 分包零拷贝子切片与 X11 终端检测 100ms 缓存

* fix(x11): 绑定焦点窗口缓存并支持焦点切换即时失效
2026-11-06 04:38:00 +08:00
Onekki 212e4943f9 Hyprland 手机输入法文字:统一走独立文字键盘并每批重新 attach (#176)
所有 wlroots 合成器使用独立文字键盘、每批重新 attach 下发 keymap;ASCII 也以 Unicode keysym 发送,Wayland 下 text_input 先走 keysym;切换前同步原设备修饰键。
2026-11-05 19:30:25 +08:00
jinpeng2700-techandjinpeng2700-tech 8b6de40605 portal: persist rotated consent before video starts (#175)
Co-authored-by: jinpeng2700-tech <[email protected]>
2026-11-05 05:22:22 +08:00
CrandClaude Opus 5.5 7a0c40af73 annotation: answer viewer draw RPCs and draw strokes on an X11 overlay (#174)
* annotation: answer viewer draw RPCs and draw strokes on an X11 overlay

The official viewer's watch-mode annotation (批注) sends RpcRequest 27
draw_req, which this host never answered, so the viewer reported
批注开启失败 (9998). The schema is taken from the Mac 4.42.0
UURemoteService SwiftProtobuf metadata. Replies go on TEXT because a
reply on CONTROL times out.

Strokes are drawn on a click-through override-redirect ARGB window,
which needs a compositing manager. The window exists only while
annotation is on and is removed when the desktop session ends.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* annotation: follow root resizes and scope resets to the owning peer

Addresses the Codex review on #174.

- A RandR resize (on X11 the viewer's resolution choice does this) left
  the overlay at its old size. The overlay now watches root
  ConfigureNotify and is rebuilt at the new geometry. Strokes keep the
  viewer's points and are laid out again.
- A delayed reset from a replaced desktop peer could remove the
  annotation of the viewer that took over. Requests and resets now carry
  the peer (its PeerActions address), and only the owner's reset,
  toggle-off or clear applies.

The ignored overlay smoke test covers both cases. It always checks the
owner takeover, and checks the resize when UU_ANNOTATION_SMOKE_RESIZE is
set on a disposable display.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-11-05 05:22:14 +08:00
Mr. Error 50ff42e8d7 Privacy: keep the cover window out of the task manager (#169)
* fix(privacy): keep the cover window out of the task manager

The cover is a plain Wayland toplevel and GTK's skip-taskbar hint is X11
only, so KWin listed it: the task manager showed an unidentified window
(class uuremote-server, caption "uu-remote-linux privacy") with the icon
theme's generic "wayland" icon, a yellow W in Papirus.

Mark the window through KWin scripting after the cover reports ready. The
same one-shot script mechanism already moves windows to the virtual output.
Failure only logs; the cover itself is unaffected.

Verified on KDE Plasma 6.8 Wayland: setting skipTaskbar on the running
cover removes the task manager entry immediately, and the entry returns
when a new cover window is created without the fix. `cargo test --features
wayland,portal`: 320 passed, 10 ignored.

* fix(privacy): match every cover window, not just the first caption

Picture mode creates one cover per physical monitor with the same title,
and KWin appends " <2>" and similar suffixes to duplicate captions, so the
exact match skipped every cover after the first on a multi-monitor host.
Match the title as a prefix instead.

* fix(privacy): report the cover ready only after its windows are mapped

The child wrote "ready" before gtk_main(), so the host marked skip-taskbar
while KWin may not have listed the cover yet; a cover that mapped later
kept the task manager entry. Pump the pending GTK events to map the windows
before the handshake, and run the mark script a second time to catch a
compositor-side delay.
2026-11-03 22:39:08 +08:00
Zhenqiang Weng 1dad755823 fix(viewer): use theme icons in the launcher (#158) 2026-11-03 14:01:02 +08:00
Jeff Zhang 8e30371317 feat(host): KDE Wayland privacy screen (RPC 7) (#146)
* feat(host): KDE Wayland 被控端防窥模式(隐私 / 关屏)

viewer RPC 7 打开防窥时,采集和输入切到 KWin 虚拟输出(portal ScreenCast VIRTUAL),
再用 kscreen-doctor 禁用物理屏;隐私模式随后重新启用物理屏并全屏覆盖桌面壁纸。
防窥期间通过 KWin InputDevice 禁用本地键鼠,指针/按键/文字改走 uinput
(KDE 不处理虚拟输出共享上的 portal 输入)。

- privacy_type 实测:1 关闭、2 隐私(壁纸)、3 关屏;SettingMetric 4/7 上报真实状态
- 恢复记录 + privacy-guard 子进程:主机以任何方式结束(含 SIGKILL)都恢复屏幕和输入
- src/privacy_screen/ 分层:控制器/协议/记录/守护/遮挡窗口共享,桌面实现走 Backend trait(kde/)
- portal:Session::set_virtual,闭包恢复按当前源重开;编码器随 portal 尺寸变化重建

Refs #140

* fix(privacy): 按 Mac 客户端协议应答防窥请求,修复授权竞态

- FeatureFlag ff_private_screen=2(ENHANCED_PRIVACY),声明支持关屏
- 先回 RPC 7 应答再切换,避免客户端超时报 9998;切换失败发 ReportError -7
- 应答 RPC 25 update_screen_saver_req(RpcResponse 21),隐私模式不再被中止
- SettingMetric 4/7 上报开关与最近一次模式(host_settings.json privacy_type),状态变化推送 SystemStateChange 5
- portal 会话串行打开,打开失败回填一次性授权:快速重连时防窥切换与闭包恢复并发曾清空保存的授权

字段号与枚举取自官方 Mac 客户端的 SwiftProtobuf name map。
已知限制:Mac 客户端防窥菜单切换后仍显示"不启用",实际模式正确。

Refs #140

* fix(privacy): 处理 #146 评审意见

- 预检 uinput:injector 未打开 uinput(/dev/uinput 不可用或 UU_INPUT_BACKEND=native)时,
  在改动输出和设备之前拒绝防窥(虚拟输出共享上 KDE 忽略 portal 输入)
- leave() 中输入设备恢复失败在恢复输出后向上返回,保留 privacy-power.json 与 guard
- record::ownership() 只缓存成功持锁,guard 轮询和 recover() 可重试
- 遮挡窗口就绪握手:privacy-wallpaper 建好窗口后输出 ready,5 秒内未就绪则报错并回滚
- rebase 到 main(#145):DMA-BUF 打开路径跳过虚拟输出、失败同样回填授权;
  #145 的 uinput 指针路径也按隐私模式的虚拟输出区域换算坐标
- README 表格压缩为一句,细节在 docs/privacy-screen.md

Refs #140

* docs(privacy): 注明 ff_system_metrics=3 对应的枚举

Refs #140

* fix(privacy): resolve lifecycle and restoration review findings
2026-11-02 01:14:10 +08:00
Jeff Zhang 73293318b4 feat(portal): VAAPI DMA-BUF zero-copy, in-process Opus audio and lock-screen uinput control (#145)
* feat(audio): capture and encode Opus in process

* feat(portal): encode VAAPI from leased DMA-BUF frames

* fix(input): route Portal controls and committed ASCII through uinput

* docs(portal): shorten setup notes and colocate hardware acceptance guidance

* fix(input): preserve GNOME IME guard for committed uinput text

* build: link pulse/opus after the static C archive (--as-needed)
2026-11-01 22:12:04 +08:00
m 2422fce673 feat(ui): modernize GTK styling and add appearance settings (#144)
* feat(ui): modernize GTK styling and add appearance settings

* fix(ui): address review and avoid cached Cairo surface in smoke tests
2026-11-01 19:09:39 +08:00
Its.spixy c0b0ca6afb GNOME Portal:手机控制端拖动滚动、按住选中、短按点击 (#134)
Replayed as touch, a phone drag scrolled in browsers but still selected
text in VTE terminals (Ptyxis, GNOME Terminal), as on a real touchscreen.
By default on the portal backend the host now decides per press: moving
past 12 px within 450 ms scrolls smoothly (NotifyPointerAxis or EIS
scroll, content follows the finger, `finish` on release so clients may
coast), holding still selects with button 1 down, and a short press
clicks. This works in terminals too and needs no touchscreen consent.
UU_TOUCH_INPUT=touch keeps the touchscreen replay (with its one-time
consent upgrade); UU_TOUCH_INPUT=0 keeps plain mouse drags.
2026-10-29 23:34:30 +08:00
Its.spixy 11097b5847 GNOME Portal:手机触控模式拖动按触摸屏重放,输入法 ASCII 直接按键输入 (#131)
* portal: mobile touch-mode drags become touch, consent asks once for it

In touch mode the Android viewer sends a finger as a left-button drag at
absolute positions (observed: press, mouse_move_absolute stream, release),
which on GNOME selects text instead of scrolling. SelectDevices now also
asks for the touchscreen type where AvailableDeviceTypes offers it, and a
drag from an Android/iOS controller (controller_platform 2/3) that follows
absolute motion is replayed as one finger through NotifyTouch* or EIS
touch, so the desktop scrolls and taps as on a touch screen. Relative
motion (the trackpad mode) and every other viewer keep mouse buttons.

A consent saved before this restores keyboard and pointer only. The first
mobile drag then asks the host once per run in the background (GNOME's
share dialog, also visible on the phone; the consent timeout closes it)
and swaps the new session in only when it grants the touchscreen for the
same monitor and size. The saved consent is never removed beforehand.
UU_TOUCH_INPUT=0 keeps mouse drags and never asks.

* input: type mobile IME text as portal keysyms on Latin GNOME layouts

Each mobile text_input was set as the clipboard and pasted with
Shift+Insert, which VTE terminals bind to the PRIMARY selection: text
typed from the phone into a terminal pasted whatever was last selected
(observed: a selected line of box-drawing characters for every letter).
When GNOME's active input source (first of mru-sources) is a Latin xkb
layout, printable ASCII, newline and tab now go through
NotifyKeyboardKeysym, where Mutter picks the key and Shift level of the
active layout. Other text, IBus engines, KDE and EIS sessions keep the
clipboard paste, which no longer replaces the clipboard for plain typing.

* portal test: accept libei before 1.3 rejecting a touch outside one of two regions

libei 1.2 (Ubuntu 24.04, CI) accepts a touch only inside every region of the
device; 1.3.0 checks any region. The harness device also carries a region for
another screen, so the older library rejects the touch with a client-bug
diagnostic. A real one-stream session has one region.
2026-10-29 19:49:15 +08:00
Its.spixyandClaude Opus 5.5 0cbfc5b4f1 控制端:原生分辨率、中英文界面、控制中心、实测 RTT 与稳定性修复 (#129)
* viewer: decode at the host's native size and filter window scaling

Every frame was scaled into a fixed 1920x1080 canvas and SDL then stretched it
to the window with nearest-neighbour sampling, so remote text looked uneven and
blurry. Decode at the native size (read from ffmpeg's verbose scaler line),
restart the decoder when the host resolution changes, and use linear render
scaling. UU_VIEWER_SIZE keeps the fixed canvas, now resampled with Lanczos.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Add Chinese/English UI language

All GTK windows (viewer launcher, tool windows, host main window and QR login)
and viewer messages are available in Chinese and English. The language comes
from UU_LANG, the choice saved in Settings -> General, then the locale.
README: document the fork's changes and language selection.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Host main window: add the language selector

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: control center, network status, loading screen, device previews

In-window chrome drawn on the SDL canvas with a fontconfig font (ab_glyph):
- loading animation with the connection stage instead of a black window
- control center (Ctrl+Alt+M or the top tab): quality, fps, true color,
  resolution, fit/1:1, volume, auto lock and host mute (SimpleAction 19,
  14/18/16), system shortcut grab, file transfer, watch mode, full screen,
  disconnect
- network status panel (Ctrl+Alt+G): time, route, fps, bitrate, RTT, loss
- launcher device previews from the last remote picture (local 0600 cache)
- viewer sign-in keeps the local host user service running, so this
  computer joins the account's device list; the settings switch controls it

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: compact cascading control center

Narrow category list with an options card beside the selected row, sized to
its content; opaque cards with a hairline border and soft shadow, so the
remote picture no longer shows through.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: keep the control center responsive; resync on a key frame

The menu was rasterized on every mouse event just to hit-test it; hit testing
now uses the layout alone and the drawn menu is cached until what it shows
changes. A stalled UI overflowed the access-unit queue, and the reset decoder
then smeared P-frames into blocks; after a reset it now waits for an IDR/IRAP
while requesting key frames. The tab icon is drawn, since fonts without U+2630
showed a box.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: measured RTT, no crash on closing tool windows, account card

webrtc-ice never measured the round trip, so the network panel always read
'RTT --'. Binding responses now record it on their pair, and the selected
pair is pinged when the sample is older than the keepalive interval, since
a streaming pair never idles (vendor/webrtc-ice/PATCHES.md).

On Wayland, libdecor's GTK plugin drew SDL's title bar with GTK3 from SDL's
thread while the file window ran gtk_main on its own; closing that window
crashed in GTK's style code. GTK builds now offer libdecor only the cairo
plugin unless LIBDECOR_PLUGIN_DIR is set.

Settings > General gets an Account card with the signed-in user and Sign out.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* README: keep the language section, without the fork notes

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: English server errors in the English UI; stable type_ipc tests

UU servers answer in Chinese only. The English UI now translates the known
messages (2002 target already controlled, assistance refusals) and shows the
code for unknown ones instead of Chinese text.

type_ipc tests shared one temp directory per process and read
XDG_RUNTIME_DIR while another test pointed it at a planted directory; each
call now gets its own directory and socket tests hold the environment lock.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer launcher: switching the language restarts the launcher

The choice was saved but took effect only on the next start, so the window
seemed to ignore it. The launcher now re-executes itself in place; session
windows are separate processes and stay connected.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: show pictures as soon as decoded; coalesce mouse motion

The raw-stream parser closed an access unit only when the next began, and
frames were collected only when another one arrived, so a single remote
change (a typed letter) waited for the next one. An access unit delimiter
now follows each unit and the loop drains finished frames between units.

Motions within one 8 ms poll collapse to the newest position (click order
kept), so a drag no longer queues behind itself on a relayed path.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer launcher: hosting is opt-in

Signing in to the viewer no longer installs or enables uuremote-native.service.
Only the Settings switch enables or disables it, and the unit's enabled state is
the saved choice, so turning it off survives a restart. A new sign-in restarts the
host only when the user turned it on and it is running.

PATCHES.md: the RTT keepalive also runs on the host; checked with the official
Android client controlling a Linux host.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: drop SDL event types sdl2 0.37 does not define

sdl2 0.37 transmutes every event type into SDL_EventType. sdl2-compat on SDL3
delivers types SDL 2 does not define (0x207), which is undefined behaviour and
aborts with debug checks (clipboard_requests_use_existing_window on Fedora 44).
Poll raw events and skip those types before the crate converts them.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Keep the package version at 0.2.39

The maintainer sets the version at release time.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-29 10:45:11 +08:00
Its.spixyandClaude Opus 5.5 47c7728822 GNOME Portal:多显示器切换、精确触控、断开后停止共享 (#128)
* portal: switch monitors on GNOME, precise touch, stop sharing when idle

GNOME grants one monitor per portal consent and refuses multi-select, so
each Mutter monitor gets its own saved consent (gnome@<connector>). The
monitors are advertised as screens; a switch opens that monitor's session
(silently once consented, GNOME asks on the host the first time) and swaps
it into the shared PortalSession, whose frame size follows the monitor.

Absolute motion and clicks go through the portal session: a uinput tablet
spans every monitor, and clicks on the separate uinput queue could land
before the compositor moved the pointer.

An idle watch ends the portal session (screen-share indicator off) once no
desktop controller is left for two checks; the next one reopens it with the
saved consent.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* portal: stop screen sharing as soon as the last controller leaves

The idle watch stays as the fallback for controllers that vanish without
a release event.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* portal test: accept the runtime-engine message in portal builds

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-29 10:44:30 +08:00
Sile Liu 835bfa2319 Fix niri monitor switching, rotated input and mobile text (#71)
niri 实验性支持:三屏切换、90°/180°/270° 旋转输出的采集与指针映射、手机中文文本输入,全部 gated 在 NIRI_SOCKET,不影响 Hyprland/X11 路径。新增 wayland_transform.h 及其 ASAN 单测。

感谢 @WALKERKILLER 的贡献与 CachyOS + niri 实机验收。

🤖 Generated with [Claude Code](https://claude.com/claude-code)
2026-10-29 01:39:01 +08:00
VallierDevandClaude Opus 5.5 092ea713f8 X11: fall back to XGetImage when MIT-SHM attach is refused
XShmAttach fails asynchronously with BadAccess when the X server cannot reach
the segment (for example a server in another container); Xlib's default error
handler exited the host before the existing XGetImage fallback could run.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 17:26:01 +08:00
Jeff Zhangandferstar 8792fb4eca vaapi: raise the in-process RC max_qp to 51 so capped presets reach the QP 51 floor (#102)
Co-authored-by: ferstar <[email protected]>
2026-10-23 11:24:15 -07:00
VallierDevandClaude Opus 5.5 61c3f91e9e Install: install.sh installs FFmpeg; host notifies the desktop user when it is missing (#97)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 01:21:57 -07:00
76a225a235 Tray: install the symbolic icon into the user hicolor theme (#90)
v0.2.25 showed KDE's unknown icon on Plasma 6.8 (#87). Plasma resolves
SNI icons theme by theme, trying dash-trimmed names in each theme before
the IconThemePath app theme, which comes last, so a cache-only icon is
easy to lose. Write it to $XDG_DATA_HOME/icons/hicolor (found by every
panel's default lookup; only when changed) and keep that as the theme
path. The new name "uuremote-tray-symbolic" cannot trim into the colored
"uu-remote-linux" app icon and avoids entries cached under the old name.

Checked with KIconLoader on Plasma 6.7 (Plasma's IconThemePath setup and
the global loader both resolve it, with the colored icon installed too).

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:54:23 -07:00
cb4850d296 Tray: monochrome icon that follows light/dark panels (#88)
* Tray: monochrome icon that follows light/dark panels

The tray used the colored app icon (or the theme's "computer" when it was
not installed), which is hard to see on dark panels. Ship a 16px symbolic
icon embedded in the binary, write it to the user cache and pass that
directory as the indicator's icon theme path: GTK and the GNOME
AppIndicator extension recolor "-symbolic" names, KDE recolors the
ColorScheme-Text class. Fixes #87.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* AGENTS: config.json is parsed once, re-read only on LoginExpired

Reported in #85: the 60 s sleep is the room renewal poll, not a config reload.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 06:04:54 -07:00
Jeff Zhang 21c01d2e18 inproc-av: native VAAPI H.264/HEVC through DRI3 DMA-BUF, VPP and VCN (#80)
With --features inproc-av on X11 and UU_VIDEO_ENCODER=vaapi, VAAPI runs in process: a DRI3 DMA-BUF of the root
(XShm upload without DRI3) goes through VPP to NV12 and the hardware encoder. SPS/PPS(/VPS) and slice headers are
packed by the host because radeonsi (Mesa 26) does not write them. libva/libva-drm are dlopen'ed; release builds do
not enable inproc-av. The NVENC path is unchanged.

Accepted by the contributor on AMD HawkPoint1 (Mesa 26.2.3), 1920x1200@60, with the official Mac viewer
(HEVC, presets, fps, scaling). Intel iHD and 4K are not verified. Thanks @ferstar.
2026-10-21 15:25:13 -07:00
059a3b1bb8 inproc-av: 4:4:4 on the native NVENC engine (#76, #77)
H.264 High 4:4:4 / HEVC FRExt with chromaFormatIDC 3 and AQ off when 真彩 is requested; GPUs without YUV444 encode fail the capability check and fall back. full_chroma_available() no longer excludes the in-process path. UU_PROBE_CHROMA=444 for the probe.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 08:24:32 -07:00
76941459cc inproc-av: native in-process NVENC reading XShm directly (#74, #75)
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 07:26:45 -07:00
VallierDevandClaude Opus 5.5 b1da297e42 Wayland: only a missing virtual pointer falls back to uinput (#78)
uu_wl_move returns -2 only when the compositor has no wlr-virtual-pointer; other failures are returned as before. Document UU_WAYLAND_NO_VIRTUAL_KEYBOARD.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 21:05:11 +08:00
ossSBandClaude Opus 5.5 c739036301 Wayland: virtual pointer and keyboard are optional; capture still starts (#72, #73)
Compositors without wlr-virtual-pointer, or that restrict the virtual keyboard to their input method (Denial), now bring up capture and fall back to uinput for input. UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1 skips the virtual keyboard.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 16:29:19 +08:00
VallierDevandClaude Opus 5.5 5fdb98b0f5 QR login follows the official client: status_query_ticket, 60 s long poll, stop on failure (#68)
From the official Mac client (UURemote 4.42; QRCodeGenLoginResponse decodes only qrcode_jump_url
and status_query_ticket, the status/by_qrcode bodies carry that ticket under "token"):
- gen/login is sent without a body; the status ticket is status_query_ticket (older token as fallback).
- The status long poll re-asks right after each answer with a 60 s request timeout (was 12 s).
- Status 3 regenerates at once, status 0 after 0.35 s, 4 logs in (3 no longer calls by_qrcode).
- Errors such as HTTP 400 code 1190 and timeouts stop polling until the user clicks the new
  刷新二维码 button (Enter in a terminal; one minute when neither exists). This replaces the
  v0.2.19 backoff and the re-register hint.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:58:00 +08:00
axlrose c45e4749b5 Wayland: a failed output-power handshake must not block screencopy (#65)
Output power management is optional: the engine comment already says so, but
uu_wl_wake() only tolerated a *missing* power manager. When the compositor
offers zwlr_output_power_manager_v1 and then refuses the mode (headless
outputs, outputs without DPMS), power_failed is set and the function
reported an error. capture::keep_display_awake() propagates that error and
video.rs aborts the whole capture task with '?', so a client could connect
but never received a frame.

Treat a failed power handshake like a missing one: skip waking the screen
and keep streaming.
2026-10-20 16:28:46 +08:00
VallierDevandClaude Opus 5.5 68ad9759bd KDE idle inhibition during remote sessions; lock and X11-in-Wayland hints (#61)
- KDE portal sessions hold an org.freedesktop.ScreenSaver inhibitor while a desktop connection
  is active (GNOME keeps SessionManager.Inhibit), so the idle timeout no longer locks mid-session.
- Log a hint when the desktop locks: viewers only see black frames until it is unlocked.
- Warn when the X11 backend is selected while a Wayland session is running (XWayland root
  capture is all black without any error).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:12:28 +08:00
ZoranandJuanZoran d90b4bccde Hyprland: bind absolute pointer to the captured output; opt-in monitor switching (#57)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 00:33:31 +08:00
70cb5ad57e Wayland/wlroots: type mobile IME text through the virtual keyboard's spare keycodes (#51)
The mobile clients' input method sends `text_input {content}` over CONTROL. Upstream only
implements it for X11, so a Wayland host (Hyprland here) dropped the characters with a
warning. Wire it up: characters the session keymap already produces are pressed as
ordinary keycodes, and characters it cannot produce are carried by spare keycodes (the
keymap has ~33 named but unmapped ones) declared for the duration of one batch, in text
order, then removed again.

The focused client translates keycodes with the keymap the compositor last handed it, and
a keymap uploaded to a keyboard the seat already has is never handed on again: measured on
Hyprland 0.56.2, pressing the remapped keycodes then reproduces the previous message's
text (a space came out as the previous message's first character, and every message
repeated the one before it). Re-attaching the virtual keyboard is what makes the
compositor send the keymap to the client, so each batch does that, waits for the
compositor to install the keymap, and releases held keys first because the new keyboard
starts with none. No timing sleep is needed once the keyboard is re-attached, so there is
none. Plain latin text and spaces never touch the keymap at all. The pristine keymap is
restored after every call, so uu_wl_key keeps its own symbol map and the compositor is
never left with spare keys bound.

`wayland-text-probe` reports how many characters one upload can carry and types a sample;
UU_PROBE_SEQUENCE types one message per |-separated field, the way the phone's input
method sends them, which is what reproduced this locally.

Co-authored-by: Hey Claw <[email protected]>
Co-authored-by: Claude Code <[email protected]>
2026-10-18 21:07:23 +08:00
VallierDevandClaude Opus 5.5 19d0563781 desktop: viewer launcher entry and window icon; explicit StartupWMClass (#13)
The viewer's GTK windows had no icon and no desktop entry, so docks showed a
generic icon next to the host's. Add uu-remote-linux-viewer.desktop and use the
host icon for viewer windows.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 17:25:14 +08:00
VallierDevandClaude Opus 5.5 63ebb3e78a Release v0.2.7: mobile text_input (#13, #46); platform-aware viewer clipboard
Host: accept the official text_input {content} action on any channel and type it on
X11 via spare-keycode Unicode keysyms (verified with xev); log non-CONTROL JSON
action names. Viewer: Windows-type hosts get only the case-10 text change (a rich
format list overwrote it and was never rendered), Mac gets only the rich offer.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 09:41:56 +08:00
VallierDevandClaude Opus 5.5 aafc17e626 fix(ui): keep GTK windows on the light Adwaita theme (#43)
The CSS hard-codes a light palette; under a dark system theme unstyled
labels became white on white.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 22:45:34 +08:00
VallierDevandClaude Opus 5.5 2815a01569 feat(viewer): remove a device from the account (unbind)
POST /api/v1/device/{id}/unbind, the path the official Windows host and Mac
viewer use for 「删除设备」. Verified live on a disposable test device; the
shared-device path (/api/v1/device/share/{id}/unbind) comes from strings only.
CLI: uuremote-viewer unbind DEVICE [--shared]; launcher: 更多工具 → 删除设备
with a confirmation dialog.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 22:26:14 +08:00
VallierDevandClaude Opus 5.5 5c5958115a viewer: keep the open device page usable across list refreshes
The device list refresh (startup and every 30 s) reset the selected
device to none while its page stayed open, so every button on that page
silently did nothing. Re-select the same device by id after a refresh.
The replace-session confirmation now uses Chinese button labels like the
other dialogs instead of locale-dependent OK/Cancel.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 17:08:46 +08:00
809ce1697d Add the experimental native viewer (uuremote-viewer) (#36)
* Add the experimental native viewer (uuremote-viewer)

A Linux viewer/controller for UU Remote hosts, built separately with
--features native-viewer,viewer-sdl; the host build and behaviour are
unchanged.

- Cloud join by device and remote assistance by share ID + code (code
  via stdin only), WebRTC offer side, SDL desktop window with ffmpeg CLI
  H.264 decoding, Opus sound, keyboard/mouse, view-only mode, text
  clipboard on TEXT_DATA_CHANNEL.
- Tools: file browser/transfer (zero- and one-based download blocks),
  terminal and terminal session list, port mapping (127.0.0.1 only),
  reboot/shutdown; tools reuse the desktop peer while one is open.
- GTK launcher with device list and tool windows.
- CI builds and tests the viewer; release tarballs include it.

Logs carry field numbers, sizes and states only.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* ci: install the ffmpeg CLI for the viewer audio tests

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-17 15:41:20 +08:00
25edc41b9f fix(portal): recover capture sooner after GNOME display changes (#35)
* fix(portal): recover capture sooner after GNOME display changes

Use Mutter notifications to enable a 200 ms grace for correlated, continuously paused capture without a valid format. Cancel stale hints on healthy renegotiation and retain the five-second fallback.

Test event ordering, repeated and stale notifications, natural recovery, and subscription teardown. Document measured recovery gains and limits.

Fixes #27

* docs: keep the #27 experiment record in the PR instead of the repository

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-17 14:26:54 +08:00
bb95774ecb fix(portal): establish desktop CONTROL while GNOME is locked and auto unlock cold connections (#30)
* fix(portal): establish locked desktop control before capture

* test(portal): preserve v4 pixel inventory after deferred capture settings

* fix(control): refresh lock state after viewer Echo handshake

* fix(portal): announce desktop target before locked capture wait

* ci: run the desktop_power native test under ASan/UBSan

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* input: skip the Portal release sweep while no session is bound

The first locked connection creates its peer before any Portal exists; the sweep
then logged two failed injections and a 'reset incomplete' warning for nothing.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* docs: describe locked cold connections, auto unlock limits and iPhone status

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(portal): treat a cached screen with a closed Portal session as not ready

begin() now marks the state as waiting when the cached session is dead, and
permission/video/clipboard consumers honor it instead of reporting Allow and
starting the stale video path before maintain() has rebuilt capture.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(portal): gate input on a ready desktop and share recovery backoff

Input dispatch kept only the cached screen and dropped State.waiting, so a closed
Portal passed the gate once the screen unlocked. The supervisor's recover() and the
encoder's stream-loss recovery now share failure backoff and a terminal-denial flag,
so a denied consent is not re-prompted by the other path.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(control): keep unknown lock state unlocked, stop waits on Closing, never drop capture settings

- QuerySystemState with no logind lock state (Xvfb/linger) reports unlocked as before.
- The Portal wait loop also exits while the channel is Closing.
- Capture-setting requests back-pressure instead of try_send dropping the latest setting.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Sonnet 5.5 <[email protected]>
Co-authored-by: VallierDev <[email protected]>
2026-10-17 10:48:43 +08:00
wanglz111 f35ec3b2c7 Portal: recover capture after live scaling changes (#26)
* fix(portal): recover capture after live scaling changes

* fix(portal): keep input available during session recovery

* fix(portal): serialize reconnect recovery and throttle lock probes
2026-10-17 01:08:32 +08:00
wanglz111 b20fd6ccef Portal: map scaled GNOME input through EIS regions (#24)
* fix(portal): map scaled GNOME input through EIS regions

Keep unsupported portals on legacy input and leave capture/uinput independent of EIS. Cache logical geometry without the native handle lock and reject geometry changes during recovery.

Add native capability, handshake, geometry and lifecycle regression coverage with sanitizer checks; preserve existing non-portal paths. Refs #23.

* fix(portal): keep version 4 capture settings in pixel coordinates

Keep native, selectable and current screen rectangles in pixels with DPR 1 so legacy setting requests cannot implicitly downscale a scaled desktop. Leave Portal and EIS coordinate mapping local and unchanged.

Add inventory/request/ack/sync roundtrip regression coverage, including repeated settings changes and restoring native output. Refs #23.
2026-10-16 21:45:17 +08:00
VallierDevandClaude Opus 5.5 6882b76801 Wayland: free cached dma-buf on SHM fallback; recapture after a stall
Review follow-ups to #20: the copy-failure fallback cleared frame state
but no longer released cached dma-buf buffers, and after a backpressure
stall the engine's prefetched frame was as old as the stall. Release
v0.1.22.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-16 12:36:06 +08:00
wenmou e603761aa8 Video: reuse capture buffers, cache unchanged frames and propagate send backpressure (#20)
* Wayland: reuse DMA-BUF capture buffers and release protocol objects

* Video: cache unchanged frames and propagate send backpressure
2026-10-16 12:31:00 +08:00
VallierDevandGemini 4 Argon f876ee1ff3 Wayland: reuse per-slot SHM buffers across screencopy frames
Retain memfd, mmap, wl_shm_pool, and wl_buffer per pipeline slot when
dimensions, stride, and format remain unchanged, avoiding 33 MB 4K
allocations and unmaps on every frame. Rebuild on geometry/format
changes or aborted in-flight copies, and release all SHM resources on
reset/shutdown.

Co-Authored-By: Gemini 4 Argon <[email protected]>
2026-10-16 11:01:26 +08:00
VallierDevandClaude Opus 5.5 567662a576 X11: pick up desktop resizes between connections (#18)
The root geometry and XShm image were read once at startup, so after a
RandR or xrdp resize every new connection asked x11grab for the old size
and stalled on "transferring picture". Query the root geometry before
each desktop connection and rebuild the capture when it changed; guard
capture with a lock and reject a stale-sized buffer instead of
overflowing it. The HEVC fallback log now includes the actual failure.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-16 10:56:48 +08:00
wenmou 9c1ae123db Wayland: keep capturing without output power management; x264 ABR for bitrate presets (#15)
* Wayland: keep capturing when output power management is unavailable

keep_display_awake() runs on the desktop video start path, so a compositor\nwithout wlr-output-power-management made uu_wl_wake() return -1 and aborted\nthe whole desktop stream. Treat the missing protocol as nothing to wake.

* x264: average bitrate for the bitrate presets so 4K keyframes fit

Capped CRF plus VBV cannot fit a large IDR frame at 4K and a low cap, so\nkeyframes came out near-grey. NVENC and VAAPI already carry a target bitrate;\ngive x264 the same and keep CRF only for automatic quality.
2026-10-16 01:30:00 +08:00
VallierDevandClaude Opus 5.5 d4483e2bbd Tray icon (AppIndicator via dlopen, GtkStatusIcon fallback); show restarts the service
Tray menu: open main window, allow switch (synced), quit. Quit stops the
systemd user unit (found via /proc/self/cgroup) so Restart=always does not
bring it back; `uuremote-server show` starts the installed unit when the host
is not running. SIGUSR1 handler is installed before the pid file is written.
Verified on Ubuntu 24.04 GNOME (X11).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-15 23:02:08 +08:00
VallierDevandClaude Opus 5.5 94039c092a Remote assistance (experimental) and unified host window
Like the official client: share a device ID + verification code; the other
person connects from 开始协助. Guest identity before sign-in, account identity
after (same share ID). One GTK window: 本设备 (allow switch, ID/code with copy,
verification modes incl. custom code, rotation schedule, copy & share) and
账号 (QR before sign-in, masked account + sign out after). Logged-in hosts keep
the window hidden; `uuremote-server show` / the desktop launcher opens it.
App icon and .desktop entry in contrib/desktop.

Protocol from the official Windows lite host; guest flow, wrong-code rejection,
rotation, switching off, sign-in/sign-out verified with the official Mac
viewer. Signed-in assistance from another account is not yet verified.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-15 22:17:25 +08:00
VallierDevandClaude Opus 5.5 b5cc5ed736 Release input at desktop session boundaries; pipelined native Wayland capture
Squashed from the Codex v0.1.9 branch (reviewed):
- Clear stale input when a desktop session starts or ends and at service
  start/stop: X11 releases every pressed key/button on the display (a stuck
  XTest button blocked all clicks after a VM reboot), uinput resets its own
  devices, Wayland/portal sweep the keys this host can emit. A per-desktop
  lease stops late callbacks of an old connection from touching a new one;
  file/terminal/port-mapping peers never release desktop input.
- Native Wayland (--features wayland): double-buffered screencopy pipeline,
  viewer frame rate drives the capture rate, opt-in dma-buf (UU_WAYLAND_DMABUF=1,
  linear only, falls back to SHM). VM-measured only.
- Internal QA records (docs/validation, contrib/tests) removed from the public
  tree and ignored; they stay in the private project.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-15 19:45:12 +08:00
VallierDev d461ef9bed Add opt-in linear KMS capture prototype with explicit security limitations 2026-10-15 10:49:12 +08:00