Commit Graph
10 Commits
Author SHA1 Message Date
Jeff Zhang 8e30371317 feat(host): KDE Wayland privacy screen (RPC 7) (#146)
* feat(host): KDE Wayland 被控端防窥模式(隐私 / 关屏)

viewer RPC 7 打开防窥时,采集和输入切到 KWin 虚拟输出(portal ScreenCast VIRTUAL),
再用 kscreen-doctor 禁用物理屏;隐私模式随后重新启用物理屏并全屏覆盖桌面壁纸。
防窥期间通过 KWin InputDevice 禁用本地键鼠,指针/按键/文字改走 uinput
(KDE 不处理虚拟输出共享上的 portal 输入)。

- privacy_type 实测:1 关闭、2 隐私(壁纸)、3 关屏;SettingMetric 4/7 上报真实状态
- 恢复记录 + privacy-guard 子进程:主机以任何方式结束(含 SIGKILL)都恢复屏幕和输入
- src/privacy_screen/ 分层:控制器/协议/记录/守护/遮挡窗口共享,桌面实现走 Backend trait(kde/)
- portal:Session::set_virtual,闭包恢复按当前源重开;编码器随 portal 尺寸变化重建

Refs #140

* fix(privacy): 按 Mac 客户端协议应答防窥请求,修复授权竞态

- FeatureFlag ff_private_screen=2(ENHANCED_PRIVACY),声明支持关屏
- 先回 RPC 7 应答再切换,避免客户端超时报 9998;切换失败发 ReportError -7
- 应答 RPC 25 update_screen_saver_req(RpcResponse 21),隐私模式不再被中止
- SettingMetric 4/7 上报开关与最近一次模式(host_settings.json privacy_type),状态变化推送 SystemStateChange 5
- portal 会话串行打开,打开失败回填一次性授权:快速重连时防窥切换与闭包恢复并发曾清空保存的授权

字段号与枚举取自官方 Mac 客户端的 SwiftProtobuf name map。
已知限制:Mac 客户端防窥菜单切换后仍显示"不启用",实际模式正确。

Refs #140

* fix(privacy): 处理 #146 评审意见

- 预检 uinput:injector 未打开 uinput(/dev/uinput 不可用或 UU_INPUT_BACKEND=native)时,
  在改动输出和设备之前拒绝防窥(虚拟输出共享上 KDE 忽略 portal 输入)
- leave() 中输入设备恢复失败在恢复输出后向上返回,保留 privacy-power.json 与 guard
- record::ownership() 只缓存成功持锁,guard 轮询和 recover() 可重试
- 遮挡窗口就绪握手:privacy-wallpaper 建好窗口后输出 ready,5 秒内未就绪则报错并回滚
- rebase 到 main(#145):DMA-BUF 打开路径跳过虚拟输出、失败同样回填授权;
  #145 的 uinput 指针路径也按隐私模式的虚拟输出区域换算坐标
- README 表格压缩为一句,细节在 docs/privacy-screen.md

Refs #140

* docs(privacy): 注明 ff_system_metrics=3 对应的枚举

Refs #140

* fix(privacy): resolve lifecycle and restoration review findings
2026-11-02 01:14:10 +08:00
Its.spixyandClaude Opus 5.5 47c7728822 GNOME Portal:多显示器切换、精确触控、断开后停止共享 (#128)
* portal: switch monitors on GNOME, precise touch, stop sharing when idle

GNOME grants one monitor per portal consent and refuses multi-select, so
each Mutter monitor gets its own saved consent (gnome@<connector>). The
monitors are advertised as screens; a switch opens that monitor's session
(silently once consented, GNOME asks on the host the first time) and swaps
it into the shared PortalSession, whose frame size follows the monitor.

Absolute motion and clicks go through the portal session: a uinput tablet
spans every monitor, and clicks on the separate uinput queue could land
before the compositor moved the pointer.

An idle watch ends the portal session (screen-share indicator off) once no
desktop controller is left for two checks; the next one reopens it with the
saved consent.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* portal: stop screen sharing as soon as the last controller leaves

The idle watch stays as the fallback for controllers that vanish without
a release event.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* portal test: accept the runtime-engine message in portal builds

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-29 10:44:30 +08:00
VallierDevandClaude Opus 5.5 69aecf0269 X11: select one monitor with UU_X11_MULTISCREEN=1 (#100)
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 06:51:42 -07:00
d95053d490 X11: change the desktop resolution for the viewer's choice; survive live resizes (#86)
* Restart X11 capture at the new size when the desktop is resized mid-stream

A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.

- When an X11 stream fails and the root size differs, skip the encoder
  fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
  engine's change flag, which a live stream may already have consumed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Change the X11 desktop resolution when the viewer picks one

The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.

On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 02:44:18 -07:00
VallierDevandClaude Opus 5.5 da49e71b9d fix(x11): keep the shared display open until the last capture is dropped
The X11 engine has one process-wide display connection, but every
ScreenCapture closed it on drop. During guest assistance the device
init's screen-size probe created and dropped a capture after the main
one, closing the display under it: the stream stopped with
"X11 display wake failed" and the viewer got no video. A capture
replaced after a resize had the same hazard. Count live X11 captures
and close only on the last drop.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 14:19:49 +08:00
bb95774ecb fix(portal): establish desktop CONTROL while GNOME is locked and auto unlock cold connections (#30)
* fix(portal): establish locked desktop control before capture

* test(portal): preserve v4 pixel inventory after deferred capture settings

* fix(control): refresh lock state after viewer Echo handshake

* fix(portal): announce desktop target before locked capture wait

* ci: run the desktop_power native test under ASan/UBSan

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* input: skip the Portal release sweep while no session is bound

The first locked connection creates its peer before any Portal exists; the sweep
then logged two failed injections and a 'reset incomplete' warning for nothing.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* docs: describe locked cold connections, auto unlock limits and iPhone status

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(portal): treat a cached screen with a closed Portal session as not ready

begin() now marks the state as waiting when the cached session is dead, and
permission/video/clipboard consumers honor it instead of reporting Allow and
starting the stale video path before maintain() has rebuilt capture.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(portal): gate input on a ready desktop and share recovery backoff

Input dispatch kept only the cached screen and dropped State.waiting, so a closed
Portal passed the gate once the screen unlocked. The supervisor's recover() and the
encoder's stream-loss recovery now share failure backoff and a terminal-denial flag,
so a denied consent is not re-prompted by the other path.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(control): keep unknown lock state unlocked, stop waits on Closing, never drop capture settings

- QuerySystemState with no logind lock state (Xvfb/linger) reports unlocked as before.
- The Portal wait loop also exits while the channel is Closing.
- Capture-setting requests back-pressure instead of try_send dropping the latest setting.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Sonnet 5.5 <[email protected]>
Co-authored-by: VallierDev <[email protected]>
2026-10-17 10:48:43 +08:00
wenmou e603761aa8 Video: reuse capture buffers, cache unchanged frames and propagate send backpressure (#20)
* Wayland: reuse DMA-BUF capture buffers and release protocol objects

* Video: cache unchanged frames and propagate send backpressure
2026-10-16 12:31:00 +08:00
VallierDevandClaude Opus 5.5 567662a576 X11: pick up desktop resizes between connections (#18)
The root geometry and XShm image were read once at startup, so after a
RandR or xrdp resize every new connection asked x11grab for the old size
and stalled on "transferring picture". Query the root geometry before
each desktop connection and rebuild the capture when it changed; guard
capture with a lock and reject a stale-sized buffer instead of
overflowing it. The HEVC fallback log now includes the actual failure.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-16 10:56:48 +08:00
VallierDev d461ef9bed Add opt-in linear KMS capture prototype with explicit security limitations 2026-10-15 10:49:12 +08:00
VallierDevandClaude Opus 5.5 502635b156 Initial import of uu-remote-linux
Unofficial Linux host for NetEase UU Remote: X11 (production-tested on
GNOME/Ubuntu 24.04), experimental Wayland (Hyprland) and portal
(GNOME/KDE) backends; video, input, clipboard, file transfer, terminal,
sound, quality/fps/resolution settings, lock/unlock and system actions.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-14 23:53:16 +08:00