libx265 is about ten times slower than libx264 (15 vs 155 fps at 1080p on a 4-core Ampere A1),
so without NVENC/VAAPI the host now picks H.264 even when both sides offer H.265;
UU_VIDEO_CODEC=h265 still forces it. The release workflow builds x86_64 and aarch64 packages
(each with both engine plugins) and publishes them from a single job.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The release tarball was X11 only, so Hyprland/niri and GNOME/KDE Wayland users had to build from
source (#43, #54). With --features engine-plugins the wayland and portal engines are built as
libuu-wayland.so / libuu-portal.so and dlopen'ed only when the session selects them, so X11 hosts
need none of their libraries. The wayland plugin is built on Ubuntu 22.04 with the main binary;
the portal plugin needs libei >= 1.1 and is built on 24.04 (glibc >= 2.39). Source builds without
engine-plugins keep linking the engines statically.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A local HTTP/SOCKS proxy that intercepts TLS caused login to fail with
"tls handshake eof". Build all cloud API clients with no_proxy() unless
UU_USE_PROXY is explicitly truthy, so direct connections are the default
and environments that genuinely need a proxy can still enable it.
The viewer's GTK windows had no icon and no desktop entry, so docks showed a
generic icon next to the host's. Add uu-remote-linux-viewer.desktop and use the
host icon for viewer windows.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* HEVC: split access units by picture boundaries, and stop passing -aud to hevc_vaapi
hevc_vaapi with `-aud 1` writes an AUD only at IRAPs and drops every other picture from
the bitstream: a 90-frame 640x360 clip came out as 3 IDRs and no P-frames. The reader
splits access units on AUDs, so each "frame" became one IDR plus a whole GOP, and the
IRAP gate then rejected all of them - the H.265 path sent no video at all (measured
~12 kbit/s outbound against 4-6 Mbit/s for H.264).
HEVC now leaves AUD off and hevc_au_offsets() splits on RFC 7798 picture boundaries (an
AUD, or the first NAL after a VCL NAL that is non-VCL or starts a picture), which also
keeps multi-slice pictures in one unit and covers the libx265/NVENC shapes. Parameter
sets still repeat in-band ahead of every IDR, so no out-of-band sprop is needed.
The fixed-input probe hardcoded H.264 in three places (settings, output muxer, first-unit
check), which is why this path was never measurable; it now follows UU_VIDEO_CODEC.
Verified with desktop-video-probe (90-frame fixed input): hevc_vaapi and libx265 both
emit 90 frames, first unit an IRAP with its parameter sets.
Assisted-by: DeepSeek V4.1 Flash-1017
* HEVC: keep suffix SEI, filler and end markers with the preceding picture
RFC 7798 / H.265 7.4.2.4.4 lets only AUD, VPS/SPS/PPS, prefix SEI and types
41-44/48-55 open an access unit; trailing NALs stay with the picture. Verified on
an RTX 3090 with the fixed-input probe: hevc_nvenc and libx265 both yield 90/90
decodable units with an IRAP first.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
The 100-500 kbit default keeps NVENC keyframes inside the buffer, but VAAPI quantizes a
whole desktop keyframe when the buffer is that small: on a 2560x1440 H.264 VAAPI stream
capped at 30 Mbit/s the first IDR measured 59,910 bytes and the picture blurred once per
GOP before sharpening back.
UU_VAAPI_BUFFER_MS (10-1000 ms, VAAPI only) sizes the buffer as bitrate x ms/1000. With
250 ms on the same input the first IDR measured 142,397 bytes and the worst-frame Y-SSIM
over 180 static frames went from 0.9492 to 0.9933, with no rise in average bitrate.
Opt-in: unset, out of range or unparsable keeps the old buffer.
Assisted-by: DeepSeek V4.1 Flash-1017
docker/Dockerfile installs the release binary on Ubuntu 24.04 with the X11/GTK runtime
libs, headless (UU_DESKTOP_BACKEND=none), config in /config, data in /data. Verified
on Synology DSM 7.3: file transfer (sha256 round trip), terminal and port mapping
to the DSM web UI. Release workflow now pushes ghcr.io/vallierdev/uu-remote-linux.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
POST /api/v1/device/{id}/unbind, the path the official Windows host and Mac
viewer use for 「删除设备」. Verified live on a disposable test device; the
shared-device path (/api/v1/device/share/{id}/unbind) comes from strings only.
CLI: uuremote-viewer unbind DEVICE [--shared]; launcher: 更多工具 → 删除设备
with a confirmation dialog.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Fix viewer Dock churn by reusing SDL clipboard window
* Handle clipboard text boundaries and read only after changes
* Keep SDL clipboard scoped to the focused desktop and validate CI call sites
Offer H.265 (RFC 7798) next to H.264 and list H.265 and 4:4:4 decoder
caps; the host picks the codec. Depacketize single NAL, AP and FU units
with the existing reorder/loss handling and decode with the ffmpeg CLI
(-f hevc). UU_VIEWER_CHROMA=444 requests true color via
CaptureSettingRequest field 7 and follows CaptureSettingSync;
UU_VIEWER_CODEC=h264 keeps H.264 only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Without polkit permission (for example no active local session)
systemctl reboot/poweroff waited for an authentication dialog on the
controlled screen. Pass --no-ask-password so the action fails and is
logged instead. README: the viewer's terminal session list, reboot and
shutdown, and its Wayland window/clipboard were tested in a VM.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Add the experimental native viewer (uuremote-viewer)
A Linux viewer/controller for UU Remote hosts, built separately with
--features native-viewer,viewer-sdl; the host build and behaviour are
unchanged.
- Cloud join by device and remote assistance by share ID + code (code
via stdin only), WebRTC offer side, SDL desktop window with ffmpeg CLI
H.264 decoding, Opus sound, keyboard/mouse, view-only mode, text
clipboard on TEXT_DATA_CHANNEL.
- Tools: file browser/transfer (zero- and one-based download blocks),
terminal and terminal session list, port mapping (127.0.0.1 only),
reboot/shutdown; tools reuse the desktop peer while one is open.
- GTK launcher with device list and tool windows.
- CI builds and tests the viewer; release tarballs include it.
Logs carry field numbers, sizes and states only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* ci: install the ffmpeg CLI for the viewer audio tests
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(portal): recover capture sooner after GNOME display changes
Use Mutter notifications to enable a 200 ms grace for correlated, continuously paused capture without a valid format. Cancel stale hints on healthy renegotiation and retain the five-second fallback.
Test event ordering, repeated and stale notifications, natural recovery, and subscription teardown. Document measured recovery gains and limits.
Fixes#27
* docs: keep the #27 experiment record in the PR instead of the repository
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(portal): bootstrap video for iPhone locked auto unlock
* docs: keep the #29 experiment record in the PR instead of the repository
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(portal): establish locked desktop control before capture
* test(portal): preserve v4 pixel inventory after deferred capture settings
* fix(control): refresh lock state after viewer Echo handshake
* fix(portal): announce desktop target before locked capture wait
* ci: run the desktop_power native test under ASan/UBSan
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* input: skip the Portal release sweep while no session is bound
The first locked connection creates its peer before any Portal exists; the sweep
then logged two failed injections and a 'reset incomplete' warning for nothing.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* docs: describe locked cold connections, auto unlock limits and iPhone status
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): treat a cached screen with a closed Portal session as not ready
begin() now marks the state as waiting when the cached session is dead, and
permission/video/clipboard consumers honor it instead of reporting Allow and
starting the stale video path before maintain() has rebuilt capture.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): gate input on a ready desktop and share recovery backoff
Input dispatch kept only the cached screen and dropped State.waiting, so a closed
Portal passed the gate once the screen unlocked. The supervisor's recover() and the
encoder's stream-loss recovery now share failure backoff and a terminal-denial flag,
so a denied consent is not re-prompted by the other path.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(control): keep unknown lock state unlocked, stop waits on Closing, never drop capture settings
- QuerySystemState with no logind lock state (Xvfb/linger) reports unlocked as before.
- The Portal wait loop also exits while the channel is Closing.
- Capture-setting requests back-pressure instead of try_send dropping the latest setting.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5.5 <[email protected]>
Co-authored-by: VallierDev <[email protected]>
UU_PROBE_INPUT=<video or image sequence> bypasses desktop capture and encodes
the file with the production FFmpeg encoder arguments, so encoder
measurements no longer depend on desktop content; UU_PROBE_LOOP=1 repeats the
input up to UU_PROBE_FRAMES. Missing/undecodable input exits non-zero. The
session path is unchanged. Verified with Y4M, MP4 and PNG sequences (repeat
runs byte-identical); NVENC/VAAPI not hardware-verified.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(portal): recover capture after live scaling changes
* fix(portal): keep input available during session recovery
* fix(portal): serialize reconnect recovery and throttle lock probes
* fix(portal): map scaled GNOME input through EIS regions
Keep unsupported portals on legacy input and leave capture/uinput independent of EIS. Cache logical geometry without the native handle lock and reject geometry changes during recovery.
Add native capability, handshake, geometry and lifecycle regression coverage with sanitizer checks; preserve existing non-portal paths. Refs #23.
* fix(portal): keep version 4 capture settings in pixel coordinates
Keep native, selectable and current screen rectangles in pixels with DPR 1 so legacy setting requests cannot implicitly downscale a scaled desktop. Leave Portal and EIS coordinate mapping local and unchanged.
Add inventory/request/ack/sync roundtrip regression coverage, including repeated settings changes and restoring native output. Refs #23.
Reattaching replays the scrollback tail, which starts mid-redraw for
full-screen programs (tmux, vim, TUIs), and an unchanged size raises no
SIGWINCH. Shrink the PTY by one row and restore the latest requested size
after a pause so the program repaints (#17).
Apply the #15 ABR change to the libx265 path as well, clarify the
non-wayland build error, and document the Wayland systemd unit and uinput
module autoload (#16).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Wayland: keep capturing when output power management is unavailable
keep_display_awake() runs on the desktop video start path, so a compositor\nwithout wlr-output-power-management made uu_wl_wake() return -1 and aborted\nthe whole desktop stream. Treat the missing protocol as nothing to wake.
* x264: average bitrate for the bitrate presets so 4K keyframes fit
Capped CRF plus VBV cannot fit a large IDR frame at 4K and a low cap, so\nkeyframes came out near-grey. NVENC and VAAPI already carry a target bitrate;\ngive x264 the same and keep CRF only for automatic quality.
One video track carries H.264 or H.265 (RFC 7798 payloader); the host
announces its encoders with CONTROL Message 18 CodecNegotiation and picks
H.265 when the viewer negotiated it (the official Mac viewer offers H265
first; CaptureSettingRequest field 13 only reports the current codec).
hevc_nvenc / libx265 / hevc_vaapi with fallback to software HEVC, then
H.264; UU_VIDEO_CODEC=h264 forces H.264. True color 4:4:4 applies to H.265.
Verified with the official Mac viewer on NVENC.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The viewer sends CaptureSettingRequest field 7 = 3 when 真彩 is enabled
(ff_capture_setting versions are cumulative, so our version 4 already
implies chroma sampling). Encode yuv444p with NVENC high444p / x264
high444 and report the encoded chroma in CaptureSettingSync; VAAPI and
inproc stay 4:2:0. Log ConnectOptions decoder_cap_list (numbers only).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Tray menu: open main window, allow switch (synced), quit. Quit stops the
systemd user unit (found via /proc/self/cgroup) so Restart=always does not
bring it back; `uuremote-server show` starts the installed unit when the host
is not running. SIGUSR1 handler is installed before the pid file is written.
Verified on Ubuntu 24.04 GNOME (X11).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With the viewer option 「使用 macOS 快捷键」 off, Cmd arrives as VK_LWIN
(verified: Cmd 0x5B, Option 0xA4, Ctrl 0xA2; controller_platform 4 = macOS).
For macOS controllers Cmd+C/V/A/F/X/Z become Ctrl+key, Cmd+C/V become
Ctrl+Shift+C/V in a focused terminal, Ctrl+C keeps interrupting; other
combos and Cmd alone stay Super. Verified with the official Mac viewer.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Like the official client: share a device ID + verification code; the other
person connects from 开始协助. Guest identity before sign-in, account identity
after (same share ID). One GTK window: 本设备 (allow switch, ID/code with copy,
verification modes incl. custom code, rotation schedule, copy & share) and
账号 (QR before sign-in, masked account + sign out after). Logged-in hosts keep
the window hidden; `uuremote-server show` / the desktop launcher opens it.
App icon and .desktop entry in contrib/desktop.
Protocol from the official Windows lite host; guest flow, wrong-code rejection,
rotation, switching off, sign-in/sign-out verified with the official Mac
viewer. Signed-in assistance from another account is not yet verified.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Squashed from the Codex v0.1.9 branch (reviewed):
- Clear stale input when a desktop session starts or ends and at service
start/stop: X11 releases every pressed key/button on the display (a stuck
XTest button blocked all clicks after a VM reboot), uinput resets its own
devices, Wayland/portal sweep the keys this host can emit. A per-desktop
lease stops late callbacks of an old connection from touching a new one;
file/terminal/port-mapping peers never release desktop input.
- Native Wayland (--features wayland): double-buffered screencopy pipeline,
viewer frame rate drives the capture rate, opt-in dma-buf (UU_WAYLAND_DMABUF=1,
linear only, falls back to SHM). VM-measured only.
- Internal QA records (docs/validation, contrib/tests) removed from the public
tree and ignored; they stay in the private project.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
ffmpeg lists h264_nvenc even without NVIDIA hardware, so AMD/Intel hosts ran a
doomed NVENC process before every libx264 stream. UU_VIDEO_ENCODER=nvenc forces it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Room reconnect-key keepalive (fixes ~20 min cloud release), XDamage on
the opt-in in-process path, portal clipboard documented.
Co-Authored-By: Claude Opus 5.5 <[email protected]>