* portal: mobile touch-mode drags become touch, consent asks once for it
In touch mode the Android viewer sends a finger as a left-button drag at
absolute positions (observed: press, mouse_move_absolute stream, release),
which on GNOME selects text instead of scrolling. SelectDevices now also
asks for the touchscreen type where AvailableDeviceTypes offers it, and a
drag from an Android/iOS controller (controller_platform 2/3) that follows
absolute motion is replayed as one finger through NotifyTouch* or EIS
touch, so the desktop scrolls and taps as on a touch screen. Relative
motion (the trackpad mode) and every other viewer keep mouse buttons.
A consent saved before this restores keyboard and pointer only. The first
mobile drag then asks the host once per run in the background (GNOME's
share dialog, also visible on the phone; the consent timeout closes it)
and swaps the new session in only when it grants the touchscreen for the
same monitor and size. The saved consent is never removed beforehand.
UU_TOUCH_INPUT=0 keeps mouse drags and never asks.
* input: type mobile IME text as portal keysyms on Latin GNOME layouts
Each mobile text_input was set as the clipboard and pasted with
Shift+Insert, which VTE terminals bind to the PRIMARY selection: text
typed from the phone into a terminal pasted whatever was last selected
(observed: a selected line of box-drawing characters for every letter).
When GNOME's active input source (first of mru-sources) is a Latin xkb
layout, printable ASCII, newline and tab now go through
NotifyKeyboardKeysym, where Mutter picks the key and Shift level of the
active layout. Other text, IBus engines, KDE and EIS sessions keep the
clipboard paste, which no longer replaces the clipboard for plain typing.
* portal test: accept libei before 1.3 rejecting a touch outside one of two regions
libei 1.2 (Ubuntu 24.04, CI) accepts a touch only inside every region of the
device; 1.3.0 checks any region. The harness device also carries a region for
another screen, so the older library rejects the touch with a client-bug
diagnostic. A real one-stream session has one region.
A tool peer promoted by capture_desktop stayed marked as the desktop after its
encoder exited on its own (Wayland capture failing while locked/DPMS off), so a
later capture_desktop on the same peer only logged and never restarted the
video. Treat a finished stream task as ended: capture_desktop asks for the
desktop again and promote() restarts the video on the existing input lease.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When a port-mapping connection is already open, the Mac viewer opens the desktop by sending SimpleAction 4 (capture_desktop) on that connection's CONTROL channel instead of a new offer. The host now promotes that tool connection to the desktop: video, cursor, TEXT clipboard (with the capability echo replayed) and session counting follow a per-peer active flag. A later desktop demotes it without closing its port mappings. Stream tasks are fenced by an abort handle, and the X11 capture is rebuilt if the screen size changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.
Co-authored-by: ferstar <[email protected]>
* Restart X11 capture at the new size when the desktop is resized mid-stream
A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.
- When an X11 stream fails and the root size differs, skip the encoder
fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
engine's change flag, which a live stream may already have consumed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Change the X11 desktop resolution when the viewer picks one
The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.
On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
The iPhone client ignored our flat forward_setting device_capability and kept
quality and chroma locked. Send it nested under data.device_capability with
type beside it, list the formats the encoder really produces (4:4:4 when
available), and add sender_para_info, as the official Windows host does.
Verified with the UU iPhone app 4.42.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Host: accept the official text_input {content} action on any channel and type it on
X11 via spare-keycode Unicode keysyms (verified with xev); log non-CONTROL JSON
action names. Viewer: Windows-type hosts get only the case-10 text change (a rich
format list overwrote it and was never rendered), Mac gets only the rich offer.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Log unsupported CONTROL input actions (names only) and the server NumLock
state for numpad keys; skip the SDL window test on macOS (main-thread SDL).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(portal): bootstrap video for iPhone locked auto unlock
* docs: keep the #29 experiment record in the PR instead of the repository
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(portal): establish locked desktop control before capture
* test(portal): preserve v4 pixel inventory after deferred capture settings
* fix(control): refresh lock state after viewer Echo handshake
* fix(portal): announce desktop target before locked capture wait
* ci: run the desktop_power native test under ASan/UBSan
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* input: skip the Portal release sweep while no session is bound
The first locked connection creates its peer before any Portal exists; the sweep
then logged two failed injections and a 'reset incomplete' warning for nothing.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* docs: describe locked cold connections, auto unlock limits and iPhone status
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): treat a cached screen with a closed Portal session as not ready
begin() now marks the state as waiting when the cached session is dead, and
permission/video/clipboard consumers honor it instead of reporting Allow and
starting the stale video path before maintain() has rebuilt capture.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): gate input on a ready desktop and share recovery backoff
Input dispatch kept only the cached screen and dropped State.waiting, so a closed
Portal passed the gate once the screen unlocked. The supervisor's recover() and the
encoder's stream-loss recovery now share failure backoff and a terminal-denial flag,
so a denied consent is not re-prompted by the other path.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(control): keep unknown lock state unlocked, stop waits on Closing, never drop capture settings
- QuerySystemState with no logind lock state (Xvfb/linger) reports unlocked as before.
- The Portal wait loop also exits while the channel is Closing.
- Capture-setting requests back-pressure instead of try_send dropping the latest setting.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5.5 <[email protected]>
Co-authored-by: VallierDev <[email protected]>
display_info/capability/codec negotiation reported a fixed 60 fps; they now
use the monitor mode (hyprctl on Hyprland, xrandr on X11, UU_DISPLAY_FPS
override, 60 otherwise; external tools bounded to 1 s). NVENC 4:2:0 without
scaling takes bgra/bgr0 input and converts on the GPU (BT.601 limited range,
same tagging as swscale), saving the CPU conversion; UU_NVENC_RGB=0 restores it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The final send after the viewer closes fails with "codec is not supported
by remote", which read like an encoder negotiation bug.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
One video track carries H.264 or H.265 (RFC 7798 payloader); the host
announces its encoders with CONTROL Message 18 CodecNegotiation and picks
H.265 when the viewer negotiated it (the official Mac viewer offers H265
first; CaptureSettingRequest field 13 only reports the current codec).
hevc_nvenc / libx265 / hevc_vaapi with fallback to software HEVC, then
H.264; UU_VIDEO_CODEC=h264 forces H.264. True color 4:4:4 applies to H.265.
Verified with the official Mac viewer on NVENC.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Like the official client: share a device ID + verification code; the other
person connects from 开始协助. Guest identity before sign-in, account identity
after (same share ID). One GTK window: 本设备 (allow switch, ID/code with copy,
verification modes incl. custom code, rotation schedule, copy & share) and
账号 (QR before sign-in, masked account + sign out after). Logged-in hosts keep
the window hidden; `uuremote-server show` / the desktop launcher opens it.
App icon and .desktop entry in contrib/desktop.
Protocol from the official Windows lite host; guest flow, wrong-code rejection,
rotation, switching off, sign-in/sign-out verified with the official Mac
viewer. Signed-in assistance from another account is not yet verified.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Squashed from the Codex v0.1.9 branch (reviewed):
- Clear stale input when a desktop session starts or ends and at service
start/stop: X11 releases every pressed key/button on the display (a stuck
XTest button blocked all clicks after a VM reboot), uinput resets its own
devices, Wayland/portal sweep the keys this host can emit. A per-desktop
lease stops late callbacks of an old connection from touching a new one;
file/terminal/port-mapping peers never release desktop input.
- Native Wayland (--features wayland): double-buffered screencopy pipeline,
viewer frame rate drives the capture rate, opt-in dma-buf (UU_WAYLAND_DMABUF=1,
linear only, falls back to SHM). VM-measured only.
- Internal QA records (docs/validation, contrib/tests) removed from the public
tree and ignored; they stay in the private project.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- UU_DESKTOP_BACKEND=none: host goes online without a display; terminal, file
transfer and port mapping stay available, desktop offers are ignored.
- Tool peers (file/terminal/port mapping) get a nominal ScreenSources/CaptureChange
and Allow permissions when no desktop is available: the port-mapping viewer
aborts otherwise (also affected portal hosts before local consent).
- x11_engine: an explicit DISPLAY that cannot be opened no longer falls back to
:0/:1 (would silently capture the physical screen).
- contrib/virtual-desktop: Xvfb + desktop session on the systemd user bus
(or a private dbus-run-session bus) and a uuremote-native drop-in.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Viewer PLI/FIR: dedupe only while an IDR is pending; drop the 1 s gap so a lost IDR cannot block recovery.
- XShm: release the local mapping on every attach failure; mark the segment for removal in all cases.
- Damage events no longer defer an overdue capture.
- After idle, the next tick is one frame after now instead of now.
Accepted PLI/FIR feedback now goes through KeyframeGate: at most one request per
second, and none while the previous request still waits for the encoder.
The viewer assumed webrtc-rs's missing a=max-message-size meant 64 KB and
refused larger port-mapping frames, stalling uploads after the first
frame. Advertise 262144 in the answer sent to the viewer and vendor webrtc
with a 256 KB data-channel receive buffer (upstream u16::MAX). Verified
with the official Mac viewer: 20 MB upload 10 MB/s, 20 MB download and
5 concurrent downloads, checksums match. Docs and v0.1.4 notes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Message field 27 PortMappingFrame {session_id, rule_id, stream_id, type,
payload} on FILE_DATA_CHANNEL: SYN {version, target_host, target_port} ->
TCP connect (10 s timeout) -> SYN_ACK {version, ok, error}; DATA both ways;
FIN closes; DATA_ACK ignored, matching the official PortMappingHandler.
Bounded write queue per stream, data-channel backpressure, all streams
closed with the peer. UU_PORT_MAPPING=0 disables it. Replaces the unused
port_forward.rs placeholder.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Capture (x11grab) and H.264 encoding (h264_nvenc / libx264) now run in
this process through ffmpeg-next, with the same codec options as the old
ffmpeg CLI. Each encoder packet is one access unit, fed to the existing
DependencyGate. A PLI or FIR from the viewer forces the next frame to be
an IDR. Wayland and portal capture still use the child-process path.
Set UU_VIDEO_PIPELINE=process to fall back to the old ffmpeg child.
desktop-video-probe accepts UU_PROBE_FRAMES to lengthen the sample.
Measured with desktop-video-probe on ros2go-gpu (RTX 4090 D, Xvfb
1920x1080 @60fps, 600 frames, mostly static desktop). CPU is the sum of
the probe process and its children, sampled from /proc once per second.
Probe only: no WebRTC send, no audio.
encoder pipeline CPU (%) wall (s) bitrate (kbps)
nvenc process ~138 10.17 5356
nvenc in-process ~43 10.34 5176
libx264 process ~135 10.09 5073
libx264 in-process ~72 10.08 4986
All four outputs decode without errors and start with an IDR.
Not covered: audio still runs its own ffmpeg child (src/audio.rs), PLI to
IDR has not been checked against a live viewer, and the CI jobs need the
libav*-dev and libclang-dev packages (added to ci.yml, release.yml,
AGENTS.md and the READMEs).
Unofficial Linux host for NetEase UU Remote: X11 (production-tested on
GNOME/Ubuntu 24.04), experimental Wayland (Hyprland) and portal
(GNOME/KDE) backends; video, input, clipboard, file transfer, terminal,
sound, quality/fps/resolution settings, lock/unlock and system actions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>