* annotation: answer viewer draw RPCs and draw strokes on an X11 overlay
The official viewer's watch-mode annotation (批注) sends RpcRequest 27
draw_req, which this host never answered, so the viewer reported
批注开启失败 (9998). The schema is taken from the Mac 4.42.0
UURemoteService SwiftProtobuf metadata. Replies go on TEXT because a
reply on CONTROL times out.
Strokes are drawn on a click-through override-redirect ARGB window,
which needs a compositing manager. The window exists only while
annotation is on and is removed when the desktop session ends.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* annotation: follow root resizes and scope resets to the owning peer
Addresses the Codex review on #174.
- A RandR resize (on X11 the viewer's resolution choice does this) left
the overlay at its old size. The overlay now watches root
ConfigureNotify and is rebuilt at the new geometry. Strokes keep the
viewer's points and are laid out again.
- A delayed reset from a replaced desktop peer could remove the
annotation of the viewer that took over. Requests and resets now carry
the peer (its PeerActions address), and only the owner's reset,
toggle-off or clear applies.
The ignored overlay smoke test covers both cases. It always checks the
owner takeover, and checks the resize when UU_ANNOTATION_SMOKE_RESIZE is
set on a disposable display.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
* feat(audio): capture and encode Opus in process
* feat(portal): encode VAAPI from leased DMA-BUF frames
* fix(input): route Portal controls and committed ASCII through uinput
* docs(portal): shorten setup notes and colocate hardware acceptance guidance
* fix(input): preserve GNOME IME guard for committed uinput text
* build: link pulse/opus after the static C archive (--as-needed)
GNU ld with --as-needed (Ubuntu default) drops shared libraries listed before
libx11_engine.a, so --features inproc-av failed to link with undefined gbm_*,
xcb_dri3_* and xcb_damage_* on Ubuntu (found on aarch64; Arch is unaffected).
Co-authored-by: ferstar <[email protected]>
With --features inproc-av on X11 and UU_VIDEO_ENCODER=vaapi, VAAPI runs in process: a DRI3 DMA-BUF of the root
(XShm upload without DRI3) goes through VPP to NV12 and the hardware encoder. SPS/PPS(/VPS) and slice headers are
packed by the host because radeonsi (Mesa 26) does not write them. libva/libva-drm are dlopen'ed; release builds do
not enable inproc-av. The NVENC path is unchanged.
Accepted by the contributor on AMD HawkPoint1 (Mesa 26.2.3), 1920x1200@60, with the official Mac viewer
(HEVC, presets, fps, scaling). Intel iHD and 4K are not verified. Thanks @ferstar.
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.
Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The release tarball was X11 only, so Hyprland/niri and GNOME/KDE Wayland users had to build from
source (#43, #54). With --features engine-plugins the wayland and portal engines are built as
libuu-wayland.so / libuu-portal.so and dlopen'ed only when the session selects them, so X11 hosts
need none of their libraries. The wayland plugin is built on Ubuntu 22.04 with the main binary;
the portal plugin needs libei >= 1.1 and is built on 24.04 (glibc >= 2.39). Source builds without
engine-plugins keep linking the engines statically.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Add the experimental native viewer (uuremote-viewer)
A Linux viewer/controller for UU Remote hosts, built separately with
--features native-viewer,viewer-sdl; the host build and behaviour are
unchanged.
- Cloud join by device and remote assistance by share ID + code (code
via stdin only), WebRTC offer side, SDL desktop window with ffmpeg CLI
H.264 decoding, Opus sound, keyboard/mouse, view-only mode, text
clipboard on TEXT_DATA_CHANNEL.
- Tools: file browser/transfer (zero- and one-based download blocks),
terminal and terminal session list, port mapping (127.0.0.1 only),
reboot/shutdown; tools reuse the desktop peer while one is open.
- GTK launcher with device list and tool windows.
- CI builds and tests the viewer; release tarballs include it.
Logs carry field numbers, sizes and states only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* ci: install the ffmpeg CLI for the viewer audio tests
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(portal): establish locked desktop control before capture
* test(portal): preserve v4 pixel inventory after deferred capture settings
* fix(control): refresh lock state after viewer Echo handshake
* fix(portal): announce desktop target before locked capture wait
* ci: run the desktop_power native test under ASan/UBSan
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* input: skip the Portal release sweep while no session is bound
The first locked connection creates its peer before any Portal exists; the sweep
then logged two failed injections and a 'reset incomplete' warning for nothing.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* docs: describe locked cold connections, auto unlock limits and iPhone status
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): treat a cached screen with a closed Portal session as not ready
begin() now marks the state as waiting when the cached session is dead, and
permission/video/clipboard consumers honor it instead of reporting Allow and
starting the stale video path before maintain() has rebuilt capture.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): gate input on a ready desktop and share recovery backoff
Input dispatch kept only the cached screen and dropped State.waiting, so a closed
Portal passed the gate once the screen unlocked. The supervisor's recover() and the
encoder's stream-loss recovery now share failure backoff and a terminal-denial flag,
so a denied consent is not re-prompted by the other path.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(control): keep unknown lock state unlocked, stop waits on Closing, never drop capture settings
- QuerySystemState with no logind lock state (Xvfb/linger) reports unlocked as before.
- The Portal wait loop also exits while the channel is Closing.
- Capture-setting requests back-pressure instead of try_send dropping the latest setting.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5.5 <[email protected]>
Co-authored-by: VallierDev <[email protected]>
* fix(portal): map scaled GNOME input through EIS regions
Keep unsupported portals on legacy input and leave capture/uinput independent of EIS. Cache logical geometry without the native handle lock and reject geometry changes during recovery.
Add native capability, handshake, geometry and lifecycle regression coverage with sanitizer checks; preserve existing non-portal paths. Refs #23.
* fix(portal): keep version 4 capture settings in pixel coordinates
Keep native, selectable and current screen rectangles in pixels with DPR 1 so legacy setting requests cannot implicitly downscale a scaled desktop. Leave Portal and EIS coordinate mapping local and unchanged.
Add inventory/request/ack/sync roundtrip regression coverage, including repeated settings changes and restoring native output. Refs #23.
Like the official client: share a device ID + verification code; the other
person connects from 开始协助. Guest identity before sign-in, account identity
after (same share ID). One GTK window: 本设备 (allow switch, ID/code with copy,
verification modes incl. custom code, rotation schedule, copy & share) and
账号 (QR before sign-in, masked account + sign out after). Logged-in hosts keep
the window hidden; `uuremote-server show` / the desktop launcher opens it.
App icon and .desktop entry in contrib/desktop.
Protocol from the official Windows lite host; guest flow, wrong-code rejection,
rotation, switching off, sign-in/sign-out verified with the official Mac
viewer. Signed-in assistance from another account is not yet verified.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Squashed from the Codex v0.1.9 branch (reviewed):
- Clear stale input when a desktop session starts or ends and at service
start/stop: X11 releases every pressed key/button on the display (a stuck
XTest button blocked all clicks after a VM reboot), uinput resets its own
devices, Wayland/portal sweep the keys this host can emit. A per-desktop
lease stops late callbacks of an old connection from touching a new one;
file/terminal/port-mapping peers never release desktop input.
- Native Wayland (--features wayland): double-buffered screencopy pipeline,
viewer frame rate drives the capture rate, opt-in dma-buf (UU_WAYLAND_DMABUF=1,
linear only, falls back to SHM). VM-measured only.
- Internal QA records (docs/validation, contrib/tests) removed from the public
tree and ignored; they stay in the private project.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Unofficial Linux host for NetEase UU Remote: X11 (production-tested on
GNOME/Ubuntu 24.04), experimental Wayland (Hyprland) and portal
(GNOME/KDE) backends; video, input, clipboard, file transfer, terminal,
sound, quality/fps/resolution settings, lock/unlock and system actions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>