* annotation: answer viewer draw RPCs and draw strokes on an X11 overlay
The official viewer's watch-mode annotation (批注) sends RpcRequest 27
draw_req, which this host never answered, so the viewer reported
批注开启失败 (9998). The schema is taken from the Mac 4.42.0
UURemoteService SwiftProtobuf metadata. Replies go on TEXT because a
reply on CONTROL times out.
Strokes are drawn on a click-through override-redirect ARGB window,
which needs a compositing manager. The window exists only while
annotation is on and is removed when the desktop session ends.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* annotation: follow root resizes and scope resets to the owning peer
Addresses the Codex review on #174.
- A RandR resize (on X11 the viewer's resolution choice does this) left
the overlay at its old size. The overlay now watches root
ConfigureNotify and is rebuilt at the new geometry. Strokes keep the
viewer's points and are laid out again.
- A delayed reset from a replaced desktop peer could remove the
annotation of the viewer that took over. Requests and resets now carry
the peer (its PeerActions address), and only the owner's reset,
toggle-off or clear applies.
The ignored overlay smoke test covers both cases. It always checks the
owner takeover, and checks the resize when UU_ANNOTATION_SMOKE_RESIZE is
set on a disposable display.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
* feat(privacy): auto-enable the privacy screen on desktop connect
`UU_PRIVACY_AUTO=picture` / `screen-off` (or 2 / 3) enables the privacy
screen when the first desktop controller connects. Off by default. The
switch waits for the portal capture session and retries while it is
missing; the viewer's own RPC 7 cancels a pending auto-enable for that
session.
The privacy state poller that pushes SystemMetrics and SystemStateChange
now starts for desktop peers too (it only ran for a tool peer promoted to
desktop), and it pushes once on its first tick. A mode the viewer did not
request, such as an auto-enable, therefore reaches its menu, and the
state message also goes to TEXT, which viewers read for privacy replies.
Verified on KDE Plasma Wayland with an iOS viewer: auto picture and auto
screen-off both engage, the menu reflects the mode after the push, and a
disconnect restores the physical outputs. `cargo test --features
wayland,portal`: 320 passed, 10 ignored.
* fix(privacy): let a viewer request win against auto-enable races
Two paths could still override an explicit choice:
- the override was checked before acquiring STATE, so an RPC 7 applied in
that window could disable privacy and the auto thread could turn it back
on; the check now happens inside the same lock that enters the mode
- `session_started` captured the override counter as its baseline, so a
request that arrived after CONTROL opened but before the session counter
started was treated as unrelated and auto-enable ran anyway; the counter
is now a flag set by any RPC 7 and cleared only when the last desktop
session ends
docs/privacy-screen.md now says remote-assistance (guest) sessions are
covered too, and that supported hosts push the current privacy state once
on every desktop connect.
* feat(audio): capture and encode Opus in process
* feat(portal): encode VAAPI from leased DMA-BUF frames
* fix(input): route Portal controls and committed ASCII through uinput
* docs(portal): shorten setup notes and colocate hardware acceptance guidance
* fix(input): preserve GNOME IME guard for committed uinput text
* build: link pulse/opus after the static C archive (--as-needed)
SDL viewer forwards one mapped controller (gpd_connect/gpd_update/gpd_disconnect) and receives two-motor gpd_vibration over the existing CONTROL channel. Default off (UU_VIEWER_NATIVE_GAMEPAD=1).
Replayed as touch, a phone drag scrolled in browsers but still selected
text in VTE terminals (Ptyxis, GNOME Terminal), as on a real touchscreen.
By default on the portal backend the host now decides per press: moving
past 12 px within 450 ms scrolls smoothly (NotifyPointerAxis or EIS
scroll, content follows the finger, `finish` on release so clients may
coast), holding still selects with button 1 down, and a short press
clicks. This works in terminals too and needs no touchscreen consent.
UU_TOUCH_INPUT=touch keeps the touchscreen replay (with its one-time
consent upgrade); UU_TOUCH_INPUT=0 keeps plain mouse drags.
* portal: mobile touch-mode drags become touch, consent asks once for it
In touch mode the Android viewer sends a finger as a left-button drag at
absolute positions (observed: press, mouse_move_absolute stream, release),
which on GNOME selects text instead of scrolling. SelectDevices now also
asks for the touchscreen type where AvailableDeviceTypes offers it, and a
drag from an Android/iOS controller (controller_platform 2/3) that follows
absolute motion is replayed as one finger through NotifyTouch* or EIS
touch, so the desktop scrolls and taps as on a touch screen. Relative
motion (the trackpad mode) and every other viewer keep mouse buttons.
A consent saved before this restores keyboard and pointer only. The first
mobile drag then asks the host once per run in the background (GNOME's
share dialog, also visible on the phone; the consent timeout closes it)
and swaps the new session in only when it grants the touchscreen for the
same monitor and size. The saved consent is never removed beforehand.
UU_TOUCH_INPUT=0 keeps mouse drags and never asks.
* input: type mobile IME text as portal keysyms on Latin GNOME layouts
Each mobile text_input was set as the clipboard and pasted with
Shift+Insert, which VTE terminals bind to the PRIMARY selection: text
typed from the phone into a terminal pasted whatever was last selected
(observed: a selected line of box-drawing characters for every letter).
When GNOME's active input source (first of mru-sources) is a Latin xkb
layout, printable ASCII, newline and tab now go through
NotifyKeyboardKeysym, where Mutter picks the key and Shift level of the
active layout. Other text, IBus engines, KDE and EIS sessions keep the
clipboard paste, which no longer replaces the clipboard for plain typing.
* portal test: accept libei before 1.3 rejecting a touch outside one of two regions
libei 1.2 (Ubuntu 24.04, CI) accepts a touch only inside every region of the
device; 1.3.0 checks any region. The harness device also carries a region for
another screen, so the older library rejects the touch with a client-bug
diagnostic. A real one-stream session has one region.
* viewer: decode at the host's native size and filter window scaling
Every frame was scaled into a fixed 1920x1080 canvas and SDL then stretched it
to the window with nearest-neighbour sampling, so remote text looked uneven and
blurry. Decode at the native size (read from ffmpeg's verbose scaler line),
restart the decoder when the host resolution changes, and use linear render
scaling. UU_VIEWER_SIZE keeps the fixed canvas, now resampled with Lanczos.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Add Chinese/English UI language
All GTK windows (viewer launcher, tool windows, host main window and QR login)
and viewer messages are available in Chinese and English. The language comes
from UU_LANG, the choice saved in Settings -> General, then the locale.
README: document the fork's changes and language selection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Host main window: add the language selector
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer: control center, network status, loading screen, device previews
In-window chrome drawn on the SDL canvas with a fontconfig font (ab_glyph):
- loading animation with the connection stage instead of a black window
- control center (Ctrl+Alt+M or the top tab): quality, fps, true color,
resolution, fit/1:1, volume, auto lock and host mute (SimpleAction 19,
14/18/16), system shortcut grab, file transfer, watch mode, full screen,
disconnect
- network status panel (Ctrl+Alt+G): time, route, fps, bitrate, RTT, loss
- launcher device previews from the last remote picture (local 0600 cache)
- viewer sign-in keeps the local host user service running, so this
computer joins the account's device list; the settings switch controls it
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer: compact cascading control center
Narrow category list with an options card beside the selected row, sized to
its content; opaque cards with a hairline border and soft shadow, so the
remote picture no longer shows through.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer: keep the control center responsive; resync on a key frame
The menu was rasterized on every mouse event just to hit-test it; hit testing
now uses the layout alone and the drawn menu is cached until what it shows
changes. A stalled UI overflowed the access-unit queue, and the reset decoder
then smeared P-frames into blocks; after a reset it now waits for an IDR/IRAP
while requesting key frames. The tab icon is drawn, since fonts without U+2630
showed a box.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer: measured RTT, no crash on closing tool windows, account card
webrtc-ice never measured the round trip, so the network panel always read
'RTT --'. Binding responses now record it on their pair, and the selected
pair is pinged when the sample is older than the keepalive interval, since
a streaming pair never idles (vendor/webrtc-ice/PATCHES.md).
On Wayland, libdecor's GTK plugin drew SDL's title bar with GTK3 from SDL's
thread while the file window ran gtk_main on its own; closing that window
crashed in GTK's style code. GTK builds now offer libdecor only the cairo
plugin unless LIBDECOR_PLUGIN_DIR is set.
Settings > General gets an Account card with the signed-in user and Sign out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* README: keep the language section, without the fork notes
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer: English server errors in the English UI; stable type_ipc tests
UU servers answer in Chinese only. The English UI now translates the known
messages (2002 target already controlled, assistance refusals) and shows the
code for unknown ones instead of Chinese text.
type_ipc tests shared one temp directory per process and read
XDG_RUNTIME_DIR while another test pointed it at a planted directory; each
call now gets its own directory and socket tests hold the environment lock.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer launcher: switching the language restarts the launcher
The choice was saved but took effect only on the next start, so the window
seemed to ignore it. The launcher now re-executes itself in place; session
windows are separate processes and stay connected.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer: show pictures as soon as decoded; coalesce mouse motion
The raw-stream parser closed an access unit only when the next began, and
frames were collected only when another one arrived, so a single remote
change (a typed letter) waited for the next one. An access unit delimiter
now follows each unit and the loop drains finished frames between units.
Motions within one 8 ms poll collapse to the newest position (click order
kept), so a drag no longer queues behind itself on a relayed path.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer launcher: hosting is opt-in
Signing in to the viewer no longer installs or enables uuremote-native.service.
Only the Settings switch enables or disables it, and the unit's enabled state is
the saved choice, so turning it off survives a restart. A new sign-in restarts the
host only when the user turned it on and it is running.
PATCHES.md: the RTT keepalive also runs on the host; checked with the official
Android client controlling a Linux host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* viewer: drop SDL event types sdl2 0.37 does not define
sdl2 0.37 transmutes every event type into SDL_EventType. sdl2-compat on SDL3
delivers types SDL 2 does not define (0x207), which is undefined behaviour and
aborts with debug checks (clipboard_requests_use_existing_window on Fedora 44).
Poll raw events and skip those types before the crate converts them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Keep the package version at 0.2.39
The maintainer sets the version at release time.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Upstream webrtc-ice only gathers UDP relays. Forced-relay sessions also offer
turns:<ip>:<port>?transport=tcp, the only media path on hosts whose UDP cannot
reach the TURN servers but whose TCP goes through an HTTP proxy. Vendor
webrtc-ice 0.10.1 with a TCP/TLS dialer (optional HTTP CONNECT) that frames
STUN/ChannelData for the unchanged turn client. Certificates are chain-verified;
a name mismatch is accepted only for IP-literal TURN URLs. Enabled only with
UU_USE_PROXY=1; default UDP gathering is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Route host and viewer WebSocket signaling through the shared reqwest client so UU_USE_PROXY=1 applies to signaling as well (HTTP/HTTPS proxies only, no direct fallback, no redirects, strict upgrade validation). ICE/WebRTC media is not proxied.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Count only top-level hosts (helpers such as the Wayland capture process and
the login window are children) and explain that two instances with one
identity kick each other out of the room.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Classify QR request failures (timeout/connect/decode/body/request) with phase, elapsed time and HTTP/API status only; never print tickets, URLs or server content. Extract and test the polling decisions; keep the 60 s timeout and official refresh behaviour.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Wayland: type mobile text_input via clipboard paste on Portal and compositors without spare keycodes
* Wayland: address review comments for mobile text_input clipboard fallback
- Guard external clipboard commands in unit tests to eliminate desktop side effects
- Narrow paste fallback to Wayland and Portal backends only
- Document clipboard override and two-way sync behavior in README (both zh and en)
- Unify disable switch via UU_WAYLAND_TEXT=0
---------
Co-authored-by: shofukantkts <[email protected]>
The 100-500 kbit NVENC default squeezes a 1440p IDR into ~62 KB, so the
picture blurs and sharpens once per GOP. Share the VAAPI buffer parser so
UU_NVENC_BUFFER_MS (10-1000 ms of the bitrate cap) applies to the FFmpeg
pipeline and the in-process engine; default unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.
Co-authored-by: ferstar <[email protected]>
#16: with display, capture and encode all on an RTX 5070 the packed-RGB
input path is 19% slower in the probe and 25% end to end than CPU
swscale, while on an iGPU-composited desktop it was neutral to faster.
Keep it on by default only when no connected DRM connector belongs to an
nvidia-bound card; UU_NVENC_RGB=1 forces it, =0 still disables it.
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Restart X11 capture at the new size when the desktop is resized mid-stream
A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.
- When an X11 stream fails and the root size differs, skip the encoder
fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
engine's change flag, which a live stream may already have consumed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Change the X11 desktop resolution when the viewer picks one
The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.
On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
README/README.en/AGENTS: AMD iGPUs (HawkPoint, Cezanne) are accepted on the inproc-av VAAPI engine with the official
Mac viewer; the FFmpeg process pipeline on AMD is not separately verified. inproc-av now covers VAAPI in process;
build headers listed. Thanks @ferstar.
H.264 High 4:4:4 / HEVC FRExt with chromaFormatIDC 3 and AQ off when 真彩 is requested; GPUs without YUV444 encode fail the capability check and fall back. full_chroma_available() no longer excludes the in-process path. UU_PROBE_CHROMA=444 for the probe.
Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.
Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
uu_wl_move returns -2 only when the compositor has no wlr-virtual-pointer; other failures are returned as before. Document UU_WAYLAND_NO_VIRTUAL_KEYBOARD.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Drop the hard-coded DISPLAY=:0 and install under graphical-session.target like packaging/deb; Xfce/i3, headless and the virtual desktop keep WantedBy=default.target. AGENTS.md recipe aligned.
Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
systemctl start returns 0 when the unit is skipped by a Condition or keeps crashing under
Restart=; show now reads ActiveState/SubState/ConditionResult while waiting and names the real
problem. ffmpeg-sys-next's build script runs before ours, so FFmpeg >= 7 cannot be caught in
build.rs; the README and AGENTS state the 6.x requirement next to the build commands.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Mirrors the official Windows host (GameViewerServer reportLanInfo / PushMessageHandler::wakeOnLan /
send_wol): report the LAN identity after sign-in and answer wake_on_lan pushes with a magic packet
to the target's subnet broadcast. Field names come from the official log strings; off by default
and unverified end to end. wake_on_lan push key names are always logged for evidence.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Built and install-tested in the release workflow (and CI) with dependencies taken from the
binaries by dpkg-shlibdeps. The unit starts with graphical-session.target; uinput access stays
opt-in (the udev rule ships under /usr/share/doc).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Session, selected backend (and the X11-inside-Wayland trap), engine plugin load results, uinput
and render-node access, FFmpeg encoders/version, the default codec, sign-in and service state.
Prints booleans, names and versions only; home directory and user name are masked. The issue
template and READMEs ask for it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
libx265 is about ten times slower than libx264 (15 vs 155 fps at 1080p on a 4-core Ampere A1),
so without NVENC/VAAPI the host now picks H.264 even when both sides offer H.265;
UU_VIDEO_CODEC=h265 still forces it. The release workflow builds x86_64 and aarch64 packages
(each with both engine plugins) and publishes them from a single job.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The release tarball was X11 only, so Hyprland/niri and GNOME/KDE Wayland users had to build from
source (#43, #54). With --features engine-plugins the wayland and portal engines are built as
libuu-wayland.so / libuu-portal.so and dlopen'ed only when the session selects them, so X11 hosts
need none of their libraries. The wayland plugin is built on Ubuntu 22.04 with the main binary;
the portal plugin needs libei >= 1.1 and is built on 24.04 (glibc >= 2.39). Source builds without
engine-plugins keep linking the engines statically.
Co-Authored-By: Claude Opus 5.5 <[email protected]>