105 Commits
Author SHA1 Message Date
Juck Zhang bfbbe2f677 feat: add opt-in controller microphone input (#207)
* feat: add opt-in controller microphone input

* fix: address microphone CI and review feedback
2026-11-09 17:47:07 +08:00
Cr d8e3025fb3 video: size the NVENC VBV buffer like libx264 so keyframes stop blurring (#103) (#205)
The 100-500 kbit NVENC default squeezes every IDR of a high-resolution desktop
into a blur that sharpens over the GOP: at 3840x2160 hevc_nvenc CQ18 / 30M the
IDR frame lost 29-31 dB Y-PSNR against the frame before it, and the following
P-frames spent 15-18 Mbit/s re-sharpening a static desktop.

NVENC now takes one second of the bitrate cap within 500-8000 kbit, the rule
libx264 already uses (#8). UU_NVENC_BUFFER_MS still overrides it, so a small
value brings back the low-latency buffer. VAAPI is unchanged.
2026-11-09 08:37:00 +08:00
Mr. Error 21e9e690ae feat(portal): follow the viewer's mouse mode with the embedded cursor (#203)
* feat(portal): follow the viewer's mouse mode with the embedded cursor

The portal stream hides the compositor cursor. A viewer that drives the pointer
with relative motion (UU's controlled-end mouse, also the Mac trackpad mode)
has no absolute position to draw its own pointer at, and the game's cursor
never reaches the picture, so the mouse can be moved and clicked but not seen.

Request cursor_mode=embedded while relative motion arrives, and keep it hidden
while absolute motion arrives: there the viewer draws its own pointer and an
embedded copy would trail it. The portal reads cursor_mode only when the
session is created, so switch by rebuilding the session with the saved consent,
the same path the privacy screen uses. A run has to last five events and 200 ms
before it counts, so a burst at connect or an alternating controller does not
rebuild; a failed rebuild backs off for five seconds.

The rebuilt session is checked against the monitor the previous one captured,
so a restored consent cannot silently move the share. The engine keeps the mode
for later opens (recovery, privacy, monitor switches) and skips the switch when
an older libuu-portal.so lacks uu_portal_set_cursor_mode.

UU_PORTAL_CURSOR_MODE=embedded sets the startup default.

* fix(portal): keep the cursor rebuild off locks and held input

Do not rebuild while the desktop is locked, and cancel an open that is already
waiting when it locks: GNOME closes the portal session on lock, so the request
would wait for consent that cannot be answered while holding `recovery`
against the post-unlock recovery.

Keys and buttons held through the portal input path are dropped when the
session is replaced, so wait for their release. Monitor selection takes the
same `recovery` lock, so it cannot install a stale source over the cursor
rebuild or the other way round, and the rebuilt session is revalidated against
the source it started from.

* fix(portal): carry the clipboard across cursor rebuilds

The engine keeps the viewer's text only in the session that provided it, and
the host re-sends it only for a new viewer update. A replacement session
therefore had no clipboard ownership, so changing the mouse mode made
previously synchronized text unpasteable until the viewer sent it again.

Offer the text to the replacement before the old session closes, but only
while that session still owns the selection: a local copy that has taken the
clipboard since is left alone. Touch consent upgrades replace the handle too,
so they take the same `recovery` lock as recovery, monitor selection and the
cursor rebuild and cannot install a handle opened under an older cursor mode.

* fix(portal): serialize clipboard writes with the cursor swap

The clipboard bridge calls clipboard_set from its own thread. Installing the
replacement handle and then carrying the old text over left a window where an
update could land on the new session and be overwritten by the older text,
with no pending update left to restore it.

Take a clipboard write lock before the handle is installed and hold it until
the carry-over finishes; clipboard_set takes the same lock. A write that
starts before the swap is included in the text carried over, a write that
starts after waits and wins.

* fix(portal): cancel a waiting rebuild when the desktop ends

The desktop ends its share when the last controller leaves (end_idle), but an
open that is still waiting for consent is not the installed handle, so it
survived that shutdown and installed a live share afterwards.

Bump an end generation in Session::end(), snapshot it before the open, and
cancel the request when it moves. The generation is checked again under the
handle lock before installing, so an end that races the swap either aborts
the rebuild or ends the handle it just installed.

* fix(portal): keep session swaps consistent with the viewer's state

Addresses the ownership race reported on the previous commit and the paths
that share its failure mode.

uu_portal_clipboard_set publishes the new text before SetSelection so a
transfer during the call serves it, restores the old text when the call fails,
and ignores a stale revision so a newer owner wins. The engine reports the
cursor mode it actually requested and the modes the backend advertised; the
host follows that instead of assuming the request was applied and stops
retrying where an embedded cursor is unavailable. The end generation is
sampled before the rebuild queues for `recovery`, a rebuild refuses to start
while the session is no longer alive, and cancellation now covers virtual
output opens.

Portal-bound keys and buttons are tracked separately, so an input held through
the portal defers the swap on every routing path, and the check is repeated
after the open. Every handle replacement (privacy screen, monitor switch,
touch consent, recovery after lock or stream loss) carries the viewer's
clipboard under the clipboard write lock, and the rebuilt session is checked
against the captured geometry.

* fix(portal): stop the swap bookkeeping from outliving a deferred rebuild

open_inner publishes the replacement's cursor mode before the swap. When held
input defers the rebuild, that session is never installed, so the host belief
described the discarded handle and later motion looked like it already matched.
Restore the belief from the installed session on every abort path.

The extra portal releases in release_held now stop at the first failure like
the sweep above; with a dead portal bus each remaining input waited out the
three-second timeout while the input and desktop-owner locks were held.

* fix(portal): invalidate clipboard ownership when a session ends

A closed session stops receiving owner changes, so a cached clipboard_owns
survived into the recovery paths and could republish old viewer text over a
newer local copy. Clear the claim in uu_portal_end and the Closed handler, and
let uu_portal_clipboard_copy refuse a source that is no longer alive.

Mark the embedded cursor unavailable when the engine did not apply it: with
AvailableCursorModes unreadable the session opens hidden, and retrying on every
motion run rebuilt it every 200 ms without changing the mode.

* fix(portal): retire held portal input when the devices are replaced

A key or button held through the native portal path is recorded when its
injection succeeds. If the session dies first, the key-up fails and the record
survives; recovery then installs new devices while the tracker still says an
input is held, so pointer-mode detection keeps deferring.

Keep the tracker in module state and clear it whenever the portal replaces or
ends its devices: the rebuild, both recovery paths and Session::end.

* fix(portal): scope held-input retirement to the retired handle

A press delivered to the replacement after the swap could be recorded while
the old handle was still being retired, and the unconditional reset then
deleted it. Hold the recording lock from before the swap until the reset
finishes, so only inputs sent to the retired devices are dropped.

A portal touchscreen contact was not tracked at all: the swap retired the
active contact while TouchDrag stayed down, so the following move reached a
session that never saw the press. Track contact down/up and include it in the
deferral state.

* fix(portal): serialize touch injection with handle replacement

inject_touch wrote the contact state outside the recording lock the handle
swap holds, so a contact delivered to the replacement between the swap and the
reset could be cleared, and the following phase-1 would fail on new devices
that never saw the press. Take the same lock across the injection and the
state update.

* fix(portal): decide the swap under the held-input lock

The final held-input check ran before install_replacement() took the serial
lock, so an input could be injected and recorded against the old handle while
the install waited for the clipboard lock. The install then retired the
records and swapped, destroying a contact the new devices never saw. Repeat
the check under the serial lock that recording uses, and defer the rebuild
when it hits.

* fix(portal): hold the input lock across native injection, refresh privacy geometry

inject_button and inject_key injected through the portal and only took the
recording lock afterwards, so a swap could take the lock, see no held input
and replace the devices that had just received the press. Take the serial lock
across the injection and its record, as the touch path does; the record
helpers no longer take it themselves.

A cursor rebuild that replaces the privacy virtual output invalidates the
cached pointer region: recompute it from the settled layout so absolute input
keeps landing inside the captured share.
2026-11-09 08:36:37 +08:00
cnetstandCodex 36fd51a9d6 Fix terminal session termination, ownership and list updates (#197)
Co-authored-by: Codex <codex@localhost>
2026-11-07 19:42:15 +08:00
cnetstandCodex 1004806035 Resolve the iOS default upload directory alias (#198)
Co-authored-by: Codex <codex@localhost>
2026-11-07 11:21:56 +08:00
CrandClaude Opus 5.5 7a0c40af73 annotation: answer viewer draw RPCs and draw strokes on an X11 overlay (#174)
* annotation: answer viewer draw RPCs and draw strokes on an X11 overlay

The official viewer's watch-mode annotation (批注) sends RpcRequest 27
draw_req, which this host never answered, so the viewer reported
批注开启失败 (9998). The schema is taken from the Mac 4.42.0
UURemoteService SwiftProtobuf metadata. Replies go on TEXT because a
reply on CONTROL times out.

Strokes are drawn on a click-through override-redirect ARGB window,
which needs a compositing manager. The window exists only while
annotation is on and is removed when the desktop session ends.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* annotation: follow root resizes and scope resets to the owning peer

Addresses the Codex review on #174.

- A RandR resize (on X11 the viewer's resolution choice does this) left
  the overlay at its old size. The overlay now watches root
  ConfigureNotify and is rebuilt at the new geometry. Strokes keep the
  viewer's points and are laid out again.
- A delayed reset from a replaced desktop peer could remove the
  annotation of the viewer that took over. Requests and resets now carry
  the peer (its PeerActions address), and only the owner's reset,
  toggle-off or clear applies.

The ignored overlay smoke test covers both cases. It always checks the
owner takeover, and checks the resize when UU_ANNOTATION_SMOKE_RESIZE is
set on a disposable display.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-11-05 05:22:14 +08:00
Zhenqiang Weng ba8f8ada20 viewer: mirror remote cursor shapes and hotspots in SDL (#168) 2026-11-03 19:35:53 +08:00
Mr. Error 4c86c7f782 Privacy: auto-enable on desktop connect (UU_PRIVACY_AUTO) (#161)
* feat(privacy): auto-enable the privacy screen on desktop connect

`UU_PRIVACY_AUTO=picture` / `screen-off` (or 2 / 3) enables the privacy
screen when the first desktop controller connects. Off by default. The
switch waits for the portal capture session and retries while it is
missing; the viewer's own RPC 7 cancels a pending auto-enable for that
session.

The privacy state poller that pushes SystemMetrics and SystemStateChange
now starts for desktop peers too (it only ran for a tool peer promoted to
desktop), and it pushes once on its first tick. A mode the viewer did not
request, such as an auto-enable, therefore reaches its menu, and the
state message also goes to TEXT, which viewers read for privacy replies.

Verified on KDE Plasma Wayland with an iOS viewer: auto picture and auto
screen-off both engage, the menu reflects the mode after the push, and a
disconnect restores the physical outputs. `cargo test --features
wayland,portal`: 320 passed, 10 ignored.

* fix(privacy): let a viewer request win against auto-enable races

Two paths could still override an explicit choice:

- the override was checked before acquiring STATE, so an RPC 7 applied in
  that window could disable privacy and the auto thread could turn it back
  on; the check now happens inside the same lock that enters the mode
- `session_started` captured the override counter as its baseline, so a
  request that arrived after CONTROL opened but before the session counter
  started was treated as unrelated and auto-enable ran anyway; the counter
  is now a flag set by any RPC 7 and cleared only when the last desktop
  session ends

docs/privacy-screen.md now says remote-assistance (guest) sessions are
covered too, and that supported hosts push the current privacy state once
on every desktop connect.
2026-11-03 16:33:41 +08:00
Zhenqiang Weng c0abdeae72 fix(viewer): restore held modifier combinations after focus changes (#165) 2026-11-03 15:33:13 +08:00
Zhenqiang Weng 1dad755823 fix(viewer): use theme icons in the launcher (#158) 2026-11-03 14:01:02 +08:00
Jeff Zhang fcfd2b6717 feat(wallpaper): discover Omarchy backgrounds automatically (#157)
Read Omarchy's current/background link (XDG_STATE_HOME, falling back to XDG_CONFIG_HOME) on Hyprland; explicit UU_WALLPAPER keeps precedence.
2026-11-03 12:31:33 +08:00
Jeff ZhangandJeff Zhang 3bce605eaa feat(host): 上报系统壁纸,补齐设备卡片缩略图 (#153)
* feat(host): report system wallpaper for device cards

* fix(host): handle quoted wallpaper paths and KDE defaults

* docs: align wallpaper guidance and disclose default uploads

* fix(host): validate active KDE plugin for stored wallpapers

* fix(host): support Plasma 5 wallpaper config queries

* fix(host): exclude Plasma panels from wallpaper reporting

* fix(host): follow image symlinks in KDE wallpaper packages

---------

Co-authored-by: Jeff Zhang <[email protected]>
2026-11-03 01:25:57 +08:00
m ef14f76422 fix(viewer): disable local IME text input in remote desktop window (#150) 2026-11-02 13:18:55 +08:00
Jeff Zhang f4f16aafe4 fix(privacy): synchronize Mac viewer privacy status over TEXT (#148)
* fix(privacy): synchronize Mac viewer privacy status over TEXT

* fix(webrtc): bound pending TEXT replies and coalesce metrics
2026-11-02 11:17:55 +08:00
Jeff Zhang 8e30371317 feat(host): KDE Wayland privacy screen (RPC 7) (#146)
* feat(host): KDE Wayland 被控端防窥模式(隐私 / 关屏)

viewer RPC 7 打开防窥时,采集和输入切到 KWin 虚拟输出(portal ScreenCast VIRTUAL),
再用 kscreen-doctor 禁用物理屏;隐私模式随后重新启用物理屏并全屏覆盖桌面壁纸。
防窥期间通过 KWin InputDevice 禁用本地键鼠,指针/按键/文字改走 uinput
(KDE 不处理虚拟输出共享上的 portal 输入)。

- privacy_type 实测:1 关闭、2 隐私(壁纸)、3 关屏;SettingMetric 4/7 上报真实状态
- 恢复记录 + privacy-guard 子进程:主机以任何方式结束(含 SIGKILL)都恢复屏幕和输入
- src/privacy_screen/ 分层:控制器/协议/记录/守护/遮挡窗口共享,桌面实现走 Backend trait(kde/)
- portal:Session::set_virtual,闭包恢复按当前源重开;编码器随 portal 尺寸变化重建

Refs #140

* fix(privacy): 按 Mac 客户端协议应答防窥请求,修复授权竞态

- FeatureFlag ff_private_screen=2(ENHANCED_PRIVACY),声明支持关屏
- 先回 RPC 7 应答再切换,避免客户端超时报 9998;切换失败发 ReportError -7
- 应答 RPC 25 update_screen_saver_req(RpcResponse 21),隐私模式不再被中止
- SettingMetric 4/7 上报开关与最近一次模式(host_settings.json privacy_type),状态变化推送 SystemStateChange 5
- portal 会话串行打开,打开失败回填一次性授权:快速重连时防窥切换与闭包恢复并发曾清空保存的授权

字段号与枚举取自官方 Mac 客户端的 SwiftProtobuf name map。
已知限制:Mac 客户端防窥菜单切换后仍显示"不启用",实际模式正确。

Refs #140

* fix(privacy): 处理 #146 评审意见

- 预检 uinput:injector 未打开 uinput(/dev/uinput 不可用或 UU_INPUT_BACKEND=native)时,
  在改动输出和设备之前拒绝防窥(虚拟输出共享上 KDE 忽略 portal 输入)
- leave() 中输入设备恢复失败在恢复输出后向上返回,保留 privacy-power.json 与 guard
- record::ownership() 只缓存成功持锁,guard 轮询和 recover() 可重试
- 遮挡窗口就绪握手:privacy-wallpaper 建好窗口后输出 ready,5 秒内未就绪则报错并回滚
- rebase 到 main(#145):DMA-BUF 打开路径跳过虚拟输出、失败同样回填授权;
  #145 的 uinput 指针路径也按隐私模式的虚拟输出区域换算坐标
- README 表格压缩为一句,细节在 docs/privacy-screen.md

Refs #140

* docs(privacy): 注明 ff_system_metrics=3 对应的枚举

Refs #140

* fix(privacy): resolve lifecycle and restoration review findings
2026-11-02 01:14:10 +08:00
Jeff Zhang 73293318b4 feat(portal): VAAPI DMA-BUF zero-copy, in-process Opus audio and lock-screen uinput control (#145)
* feat(audio): capture and encode Opus in process

* feat(portal): encode VAAPI from leased DMA-BUF frames

* fix(input): route Portal controls and committed ASCII through uinput

* docs(portal): shorten setup notes and colocate hardware acceptance guidance

* fix(input): preserve GNOME IME guard for committed uinput text

* build: link pulse/opus after the static C archive (--as-needed)
2026-11-01 22:12:04 +08:00
AZsaber 1bdc0eb910 fix(viewer): prevent compressed-frame queue overflow at high input rates (#143) 2026-11-01 21:11:07 +08:00
m 2422fce673 feat(ui): modernize GTK styling and add appearance settings (#144)
* feat(ui): modernize GTK styling and add appearance settings

* fix(ui): address review and avoid cached Cairo surface in smoke tests
2026-11-01 19:09:39 +08:00
AZsaber 1ff3383de7 feat(viewer): opt-in native gamepad and rumble for Windows hosts (#142)
SDL viewer forwards one mapped controller (gpd_connect/gpd_update/gpd_disconnect) and receives two-motor gpd_vibration over the existing CONTROL channel. Default off (UU_VIEWER_NATIVE_GAMEPAD=1).
2026-11-01 01:04:21 +08:00
tingfeng347 6bf05a6361 修复 niri 主控端控制官方 Windows 时的双向文本剪贴板同步 (#138)
Fixes #139.
2026-10-30 13:43:36 +08:00
Its.spixy c0b0ca6afb GNOME Portal:手机控制端拖动滚动、按住选中、短按点击 (#134)
Replayed as touch, a phone drag scrolled in browsers but still selected
text in VTE terminals (Ptyxis, GNOME Terminal), as on a real touchscreen.
By default on the portal backend the host now decides per press: moving
past 12 px within 450 ms scrolls smoothly (NotifyPointerAxis or EIS
scroll, content follows the finger, `finish` on release so clients may
coast), holding still selects with button 1 down, and a short press
clicks. This works in terminals too and needs no touchscreen consent.
UU_TOUCH_INPUT=touch keeps the touchscreen replay (with its one-time
consent upgrade); UU_TOUCH_INPUT=0 keeps plain mouse drags.
2026-10-29 23:34:30 +08:00
Its.spixy 11097b5847 GNOME Portal:手机触控模式拖动按触摸屏重放,输入法 ASCII 直接按键输入 (#131)
* portal: mobile touch-mode drags become touch, consent asks once for it

In touch mode the Android viewer sends a finger as a left-button drag at
absolute positions (observed: press, mouse_move_absolute stream, release),
which on GNOME selects text instead of scrolling. SelectDevices now also
asks for the touchscreen type where AvailableDeviceTypes offers it, and a
drag from an Android/iOS controller (controller_platform 2/3) that follows
absolute motion is replayed as one finger through NotifyTouch* or EIS
touch, so the desktop scrolls and taps as on a touch screen. Relative
motion (the trackpad mode) and every other viewer keep mouse buttons.

A consent saved before this restores keyboard and pointer only. The first
mobile drag then asks the host once per run in the background (GNOME's
share dialog, also visible on the phone; the consent timeout closes it)
and swaps the new session in only when it grants the touchscreen for the
same monitor and size. The saved consent is never removed beforehand.
UU_TOUCH_INPUT=0 keeps mouse drags and never asks.

* input: type mobile IME text as portal keysyms on Latin GNOME layouts

Each mobile text_input was set as the clipboard and pasted with
Shift+Insert, which VTE terminals bind to the PRIMARY selection: text
typed from the phone into a terminal pasted whatever was last selected
(observed: a selected line of box-drawing characters for every letter).
When GNOME's active input source (first of mru-sources) is a Latin xkb
layout, printable ASCII, newline and tab now go through
NotifyKeyboardKeysym, where Mutter picks the key and Shift level of the
active layout. Other text, IBus engines, KDE and EIS sessions keep the
clipboard paste, which no longer replaces the clipboard for plain typing.

* portal test: accept libei before 1.3 rejecting a touch outside one of two regions

libei 1.2 (Ubuntu 24.04, CI) accepts a touch only inside every region of the
device; 1.3.0 checks any region. The harness device also carries a region for
another screen, so the older library rejects the touch with a client-bug
diagnostic. A real one-stream session has one region.
2026-10-29 19:49:15 +08:00
Its.spixyandClaude Opus 5.5 0cbfc5b4f1 控制端:原生分辨率、中英文界面、控制中心、实测 RTT 与稳定性修复 (#129)
* viewer: decode at the host's native size and filter window scaling

Every frame was scaled into a fixed 1920x1080 canvas and SDL then stretched it
to the window with nearest-neighbour sampling, so remote text looked uneven and
blurry. Decode at the native size (read from ffmpeg's verbose scaler line),
restart the decoder when the host resolution changes, and use linear render
scaling. UU_VIEWER_SIZE keeps the fixed canvas, now resampled with Lanczos.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Add Chinese/English UI language

All GTK windows (viewer launcher, tool windows, host main window and QR login)
and viewer messages are available in Chinese and English. The language comes
from UU_LANG, the choice saved in Settings -> General, then the locale.
README: document the fork's changes and language selection.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Host main window: add the language selector

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: control center, network status, loading screen, device previews

In-window chrome drawn on the SDL canvas with a fontconfig font (ab_glyph):
- loading animation with the connection stage instead of a black window
- control center (Ctrl+Alt+M or the top tab): quality, fps, true color,
  resolution, fit/1:1, volume, auto lock and host mute (SimpleAction 19,
  14/18/16), system shortcut grab, file transfer, watch mode, full screen,
  disconnect
- network status panel (Ctrl+Alt+G): time, route, fps, bitrate, RTT, loss
- launcher device previews from the last remote picture (local 0600 cache)
- viewer sign-in keeps the local host user service running, so this
  computer joins the account's device list; the settings switch controls it

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: compact cascading control center

Narrow category list with an options card beside the selected row, sized to
its content; opaque cards with a hairline border and soft shadow, so the
remote picture no longer shows through.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: keep the control center responsive; resync on a key frame

The menu was rasterized on every mouse event just to hit-test it; hit testing
now uses the layout alone and the drawn menu is cached until what it shows
changes. A stalled UI overflowed the access-unit queue, and the reset decoder
then smeared P-frames into blocks; after a reset it now waits for an IDR/IRAP
while requesting key frames. The tab icon is drawn, since fonts without U+2630
showed a box.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: measured RTT, no crash on closing tool windows, account card

webrtc-ice never measured the round trip, so the network panel always read
'RTT --'. Binding responses now record it on their pair, and the selected
pair is pinged when the sample is older than the keepalive interval, since
a streaming pair never idles (vendor/webrtc-ice/PATCHES.md).

On Wayland, libdecor's GTK plugin drew SDL's title bar with GTK3 from SDL's
thread while the file window ran gtk_main on its own; closing that window
crashed in GTK's style code. GTK builds now offer libdecor only the cairo
plugin unless LIBDECOR_PLUGIN_DIR is set.

Settings > General gets an Account card with the signed-in user and Sign out.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* README: keep the language section, without the fork notes

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: English server errors in the English UI; stable type_ipc tests

UU servers answer in Chinese only. The English UI now translates the known
messages (2002 target already controlled, assistance refusals) and shows the
code for unknown ones instead of Chinese text.

type_ipc tests shared one temp directory per process and read
XDG_RUNTIME_DIR while another test pointed it at a planted directory; each
call now gets its own directory and socket tests hold the environment lock.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer launcher: switching the language restarts the launcher

The choice was saved but took effect only on the next start, so the window
seemed to ignore it. The launcher now re-executes itself in place; session
windows are separate processes and stay connected.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: show pictures as soon as decoded; coalesce mouse motion

The raw-stream parser closed an access unit only when the next began, and
frames were collected only when another one arrived, so a single remote
change (a typed letter) waited for the next one. An access unit delimiter
now follows each unit and the loop drains finished frames between units.

Motions within one 8 ms poll collapse to the newest position (click order
kept), so a drag no longer queues behind itself on a relayed path.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer launcher: hosting is opt-in

Signing in to the viewer no longer installs or enables uuremote-native.service.
Only the Settings switch enables or disables it, and the unit's enabled state is
the saved choice, so turning it off survives a restart. A new sign-in restarts the
host only when the user turned it on and it is running.

PATCHES.md: the RTT keepalive also runs on the host; checked with the official
Android client controlling a Linux host.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: drop SDL event types sdl2 0.37 does not define

sdl2 0.37 transmutes every event type into SDL_EventType. sdl2-compat on SDL3
delivers types SDL 2 does not define (0x207), which is undefined behaviour and
aborts with debug checks (clipboard_requests_use_existing_window on Fedora 44).
Poll raw events and skip those types before the crate converts them.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Keep the package version at 0.2.39

The maintainer sets the version at release time.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-29 10:45:11 +08:00
Sile Liu 835bfa2319 Fix niri monitor switching, rotated input and mobile text (#71)
niri 实验性支持:三屏切换、90°/180°/270° 旋转输出的采集与指针映射、手机中文文本输入,全部 gated 在 NIRI_SOCKET,不影响 Hyprland/X11 路径。新增 wayland_transform.h 及其 ASAN 单测。

感谢 @WALKERKILLER 的贡献与 CachyOS + niri 实机验收。

🤖 Generated with [Claude Code](https://claude.com/claude-code)
2026-10-29 01:39:01 +08:00
VallierDevandClaude Opus 5.5 6a633e1bc4 ICE: gather TURN relays over TCP/TLS through the HTTP proxy with UU_USE_PROXY=1
Upstream webrtc-ice only gathers UDP relays. Forced-relay sessions also offer
turns:<ip>:<port>?transport=tcp, the only media path on hosts whose UDP cannot
reach the TURN servers but whose TCP goes through an HTTP proxy. Vendor
webrtc-ice 0.10.1 with a TCP/TLS dialer (optional HTTP CONNECT) that frames
STUN/ChannelData for the unchanged turn client. Certificates are chain-verified;
a name mismatch is accepted only for IP-literal TURN URLs. Enabled only with
UU_USE_PROXY=1; default UDP gathering is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 19:34:24 +08:00
VallierDevandClaude Opus 5.5 d66937a01c Signaling: honor the REST client's opt-in HTTP proxy policy (#123)
Route host and viewer WebSocket signaling through the shared reqwest client so UU_USE_PROXY=1 applies to signaling as well (HTTP/HTTPS proxies only, no direct fallback, no redirects, strict upgrade validation). ICE/WebRTC media is not proxied.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 14:42:12 +08:00
VallierDevandClaude Opus 5.5 825f964f7d doctor: warn about extra host instances; README: never share config.json (#122)
Count only top-level hosts (helpers such as the Wayland capture process and
the login window are children) and explain that two instances with one
identity kick each other out of the room.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 14:32:37 +08:00
VallierDevandClaude Opus 5.5 ef86019b39 Login: distinguish QR polling failures from expiry with safe diagnostics (#121)
Classify QR request failures (timeout/connect/decode/body/request) with phase, elapsed time and HTTP/API status only; never print tickets, URLs or server content. Extract and test the polling decisions; keep the 60 s timeout and official refresh behaviour.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 13:28:50 +08:00
shofukantktsandshofukantkts 003da254a6 Wayland: type mobile text_input via clipboard paste on Portal and compositors without spare keycodes (#119)
* Wayland: type mobile text_input via clipboard paste on Portal and compositors without spare keycodes

* Wayland: address review comments for mobile text_input clipboard fallback

- Guard external clipboard commands in unit tests to eliminate desktop side effects
- Narrow paste fallback to Wayland and Portal backends only
- Document clipboard override and two-way sync behavior in README (both zh and en)
- Unify disable switch via UU_WAYLAND_TEXT=0

---------

Co-authored-by: shofukantkts <[email protected]>
2026-10-27 22:14:56 +08:00
VallierDevandClaude Opus 5.5 ba82bc432a nvenc: opt-in UU_NVENC_BUFFER_MS VBV buffer for high-resolution keyframes (#103)
The 100-500 kbit NVENC default squeezes a 1440p IDR into ~62 KB, so the
picture blurs and sharpens once per GOP. Share the VAAPI buffer parser so
UU_NVENC_BUFFER_MS (10-1000 ms of the bitrate cap) applies to the FFmpeg
pipeline and the in-process engine; default unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-24 10:44:59 +08:00
VallierDevandClaude Opus 5.5 69aecf0269 X11: select one monitor with UU_X11_MULTISCREEN=1 (#100)
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 06:51:42 -07:00
Jeff Zhangandferstar 6a3da14961 Switch the desktop encoder on SIGUSR2 without dropping the session (#96)
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.

Co-authored-by: ferstar <[email protected]>
2026-10-23 03:24:29 -07:00
VallierDevandClaude Opus 5.5 61c3f91e9e Install: install.sh installs FFmpeg; host notifies the desktop user when it is missing (#97)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 01:21:57 -07:00
Jeff Zhang 9d3b3da3f5 Video: probe the auto encoder in the background (NVENC then CPU) (#93)
Refs #85 (step 2).
2026-10-23 00:24:31 -07:00
阿夜 1009bdeaf2 fix(video): keep streaming after display wake failures (#95)
Fixes #94.
2026-10-22 21:24:51 -07:00
212duoand212duo fa7606894f feat(viewer): secure type input that reuses the open desktop session (#70)
Co-authored-by: 212duo <[email protected]>
2026-10-22 20:24:18 -07:00
963875516a Video: encoder and codec selection settings (set-encoder / set-codec) (#92)
Step 1 of #85: unified encoder/codec selection (host_settings.json > UU_VIDEO_* > auto), set-encoder / set-codec subcommands with locked merge writes, per-connection selection snapshot, doctor shows sources.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 16:24:22 -07:00
da99c1ceb4 NVENC: skip direct BGRA input when NVIDIA drives the display (#89)
#16: with display, capture and encode all on an RTX 5070 the packed-RGB
input path is 19% slower in the probe and 25% end to end than CPU
swscale, while on an iGPU-composited desktop it was neutral to faster.
Keep it on by default only when no connected DRM connector belongs to an
nvidia-bound card; UU_NVENC_RGB=1 forces it, =0 still disables it.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:12:31 -07:00
d95053d490 X11: change the desktop resolution for the viewer's choice; survive live resizes (#86)
* Restart X11 capture at the new size when the desktop is resized mid-stream

A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.

- When an X11 stream fails and the root size differs, skip the encoder
  fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
  engine's change flag, which a live stream may already have consumed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Change the X11 desktop resolution when the viewer picks one

The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.

On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 02:44:18 -07:00
Jeff Zhang 9e2198b03d docs: AMD VAAPI verified on the in-process engine; CPU cost figures (#81)
README/README.en/AGENTS: AMD iGPUs (HawkPoint, Cezanne) are accepted on the inproc-av VAAPI engine with the official
Mac viewer; the FFmpeg process pipeline on AMD is not separately verified. inproc-av now covers VAAPI in process;
build headers listed. Thanks @ferstar.
2026-10-21 22:24:42 -07:00
059a3b1bb8 inproc-av: 4:4:4 on the native NVENC engine (#76, #77)
H.264 High 4:4:4 / HEVC FRExt with chromaFormatIDC 3 and AQ off when 真彩 is requested; GPUs without YUV444 encode fail the capability check and fall back. full_chroma_available() no longer excludes the in-process path. UU_PROBE_CHROMA=444 for the probe.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 08:24:32 -07:00
76941459cc inproc-av: native in-process NVENC reading XShm directly (#74, #75)
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 07:26:45 -07:00
VallierDevandClaude Opus 5.5 b1da297e42 Wayland: only a missing virtual pointer falls back to uinput (#78)
uu_wl_move returns -2 only when the compositor has no wlr-virtual-pointer; other failures are returned as before. Document UU_WAYLAND_NO_VIRTUAL_KEYBOARD.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 21:05:11 +08:00
25893cd4ab docs: align the user systemd unit with the deb package unit (#69)
Drop the hard-coded DISPLAY=:0 and install under graphical-session.target like packaging/deb; Xfce/i3, headless and the virtual desktop keep WantedBy=default.target. AGENTS.md recipe aligned.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 22:42:11 +08:00
ZoranandJuanZoran 762cfccc44 Custom video bitrate is bits per second (#67)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 16:28:56 +08:00
VallierDevandClaude Opus 5.5 c1b8bfe1b3 show: report a skipped or crash-looping service instead of waiting 30 s (#62); document FFmpeg 6.x for inproc-av (#63)
systemctl start returns 0 when the unit is skipped by a Condition or keeps crashing under
Restart=; show now reads ActiveState/SubState/ConditionResult while waiting and names the real
problem. ffmpeg-sys-next's build script runs before ours, so FFmpeg >= 7 cannot be caught in
build.rs; the README and AGENTS state the 6.x requirement next to the build commands.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 15:24:33 +08:00
VallierDevandClaude Opus 5.5 5949314e55 Experimental WOL helper (UU_WOL_HELPER=1); doctor keeps logs quiet
Mirrors the official Windows host (GameViewerServer reportLanInfo / PushMessageHandler::wakeOnLan /
send_wol): report the LAN identity after sign-in and answer wake_on_lan pushes with a magic packet
to the target's subnet broadcast. Field names come from the official log strings; off by default
and unverified end to end. wake_on_lan push key names are always logged for evidence.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:43:13 +08:00
VallierDevandClaude Opus 5.5 8389fc4eed Debian package: binaries, engine plugins, systemd user unit, menu entries
Built and install-tested in the release workflow (and CI) with dependencies taken from the
binaries by dpkg-shlibdeps. The unit starts with graphical-session.target; uinput access stays
opt-in (the udev rule ships under /usr/share/doc).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:38:39 +08:00
VallierDevandClaude Opus 5.5 554cbe806a doctor: one paste-safe diagnostic report for issues
Session, selected backend (and the X11-inside-Wayland trap), engine plugin load results, uinput
and render-node access, FFmpeg encoders/version, the default codec, sign-in and service state.
Prints booleans, names and versions only; home directory and user name are masked. The issue
template and READMEs ask for it.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:30:01 +08:00
VallierDevandClaude Opus 5.5 6733a117a2 CPU hosts default to H.264; aarch64 release package (#59)
libx265 is about ten times slower than libx264 (15 vs 155 fps at 1080p on a 4-core Ampere A1),
so without NVENC/VAAPI the host now picks H.264 even when both sides offer H.265;
UU_VIDEO_CODEC=h265 still forces it. The release workflow builds x86_64 and aarch64 packages
(each with both engine plugins) and publishes them from a single job.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 01:28:38 +08:00