The WebSocket transport already reduces errors to a category or HTTP status
without the token or endpoint, so log it instead of 'details omitted' to tell
a refused upgrade from a network failure (#166).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* portal: mobile touch-mode drags become touch, consent asks once for it
In touch mode the Android viewer sends a finger as a left-button drag at
absolute positions (observed: press, mouse_move_absolute stream, release),
which on GNOME selects text instead of scrolling. SelectDevices now also
asks for the touchscreen type where AvailableDeviceTypes offers it, and a
drag from an Android/iOS controller (controller_platform 2/3) that follows
absolute motion is replayed as one finger through NotifyTouch* or EIS
touch, so the desktop scrolls and taps as on a touch screen. Relative
motion (the trackpad mode) and every other viewer keep mouse buttons.
A consent saved before this restores keyboard and pointer only. The first
mobile drag then asks the host once per run in the background (GNOME's
share dialog, also visible on the phone; the consent timeout closes it)
and swaps the new session in only when it grants the touchscreen for the
same monitor and size. The saved consent is never removed beforehand.
UU_TOUCH_INPUT=0 keeps mouse drags and never asks.
* input: type mobile IME text as portal keysyms on Latin GNOME layouts
Each mobile text_input was set as the clipboard and pasted with
Shift+Insert, which VTE terminals bind to the PRIMARY selection: text
typed from the phone into a terminal pasted whatever was last selected
(observed: a selected line of box-drawing characters for every letter).
When GNOME's active input source (first of mru-sources) is a Latin xkb
layout, printable ASCII, newline and tab now go through
NotifyKeyboardKeysym, where Mutter picks the key and Shift level of the
active layout. Other text, IBus engines, KDE and EIS sessions keep the
clipboard paste, which no longer replaces the clipboard for plain typing.
* portal test: accept libei before 1.3 rejecting a touch outside one of two regions
libei 1.2 (Ubuntu 24.04, CI) accepts a touch only inside every region of the
device; 1.3.0 checks any region. The harness device also carries a region for
another screen, so the older library rejects the touch with a client-bug
diagnostic. A real one-stream session has one region.
Route host and viewer WebSocket signaling through the shared reqwest client so UU_USE_PROXY=1 applies to signaling as well (HTTP/HTTPS proxies only, no direct fallback, no redirects, strict upgrade validation). ICE/WebRTC media is not proxied.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
After a network change the DNS/TCP/TLS/upgrade could stall forever after
room credentials were acquired; the reconnect loop never retried. The
handshake now fails after 20s and the existing 5s retry takes over.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Signaling: keep heartbeat detection alive when delivery stalls
The receive loop awaited event_sender.send() without a bound. When the main loop was parked in PeerConnection::close after a released peer, the 64-slot event queue filled and the receiver blocked inside the loop body, so the Engine.IO deadline in the same select! never ran. The host stayed online with a half-closed socket for hours.
- add a watchdog over the last inbound frame, independent of the receive loop
- bound event, pong and control sends with a timeout or try_send
- timeout PeerConnection::close so one dead peer cannot stall signaling
- regression test with a blocked event consumer
Co-Authored-By: Claude Code <[email protected]>
* Signaling: always report Disconnected when the receiver stops
The receive loop can break without enqueueing Disconnected: event delivery exceeded SEND_STALL_TIMEOUT, or the writer already stopped. receiver_done then lets the watchdog exit, while the main loop's rx_event stays open because the idle-renewal timer holds a sender. The host stays in a dead room until the 15-minute renewal, which is deferred while a peer is connected.
Hand a Disconnected off from a detached task after every loop exit. Duplicates are harmless: the main loop breaks on the first one and drops the old receiver.
The new test keeps the consumer blocked past SEND_STALL_TIMEOUT, then drains the queue and expects Disconnected.
Co-Authored-By: Claude Code <[email protected]>
---------
Co-authored-by: Claude Code <[email protected]>
When a port-mapping connection is already open, the Mac viewer opens the desktop by sending SimpleAction 4 (capture_desktop) on that connection's CONTROL channel instead of a new offer. The host now promotes that tool connection to the desktop: video, cursor, TEXT clipboard (with the capability echo replayed) and session counting follow a per-peer active flag. A later desktop demotes it without closing its port mappings. Stream tasks are fenced by an abort handle, and the X11 capture is rebuilt if the screen size changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(portal): establish locked desktop control before capture
* test(portal): preserve v4 pixel inventory after deferred capture settings
* fix(control): refresh lock state after viewer Echo handshake
* fix(portal): announce desktop target before locked capture wait
* ci: run the desktop_power native test under ASan/UBSan
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* input: skip the Portal release sweep while no session is bound
The first locked connection creates its peer before any Portal exists; the sweep
then logged two failed injections and a 'reset incomplete' warning for nothing.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* docs: describe locked cold connections, auto unlock limits and iPhone status
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): treat a cached screen with a closed Portal session as not ready
begin() now marks the state as waiting when the cached session is dead, and
permission/video/clipboard consumers honor it instead of reporting Allow and
starting the stale video path before maintain() has rebuilt capture.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(portal): gate input on a ready desktop and share recovery backoff
Input dispatch kept only the cached screen and dropped State.waiting, so a closed
Portal passed the gate once the screen unlocked. The supervisor's recover() and the
encoder's stream-loss recovery now share failure backoff and a terminal-denial flag,
so a denied consent is not re-prompted by the other path.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* fix(control): keep unknown lock state unlocked, stop waits on Closing, never drop capture settings
- QuerySystemState with no logind lock state (Xvfb/linger) reports unlocked as before.
- The Portal wait loop also exits while the channel is Closing.
- Capture-setting requests back-pressure instead of try_send dropping the latest setting.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5.5 <[email protected]>
Co-authored-by: VallierDev <[email protected]>
Documents what the viewer and cloud send in be-controlled (ConnectOptions
nesting, streamer_data and header value types) without rendering string
or byte contents, large numbers or identifiers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Only a close frame or read error ended the signaling loop, so a half-open
socket after suspend or a NAT drop left the host believing it was online.
Per Engine.IO 4, report Disconnected when no ping arrives within the
server's pingInterval + pingTimeout so the existing reconnect loop runs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The viewer sends CaptureSettingRequest field 7 = 3 when 真彩 is enabled
(ff_capture_setting versions are cumulative, so our version 4 already
implies chroma sampling). Encode yuv444p with NVENC high444p / x264
high444 and report the encoded chroma in CaptureSettingSync; VAAPI and
inproc stay 4:2:0. Log ConnectOptions decoder_cap_list (numbers only).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With the viewer option 「使用 macOS 快捷键」 off, Cmd arrives as VK_LWIN
(verified: Cmd 0x5B, Option 0xA4, Ctrl 0xA2; controller_platform 4 = macOS).
For macOS controllers Cmd+C/V/A/F/X/Z become Ctrl+key, Cmd+C/V become
Ctrl+Shift+C/V in a focused terminal, Ctrl+C keeps interrupting; other
combos and Cmd alone stay Super. Verified with the official Mac viewer.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Like the official client: share a device ID + verification code; the other
person connects from 开始协助. Guest identity before sign-in, account identity
after (same share ID). One GTK window: 本设备 (allow switch, ID/code with copy,
verification modes incl. custom code, rotation schedule, copy & share) and
账号 (QR before sign-in, masked account + sign out after). Logged-in hosts keep
the window hidden; `uuremote-server show` / the desktop launcher opens it.
App icon and .desktop entry in contrib/desktop.
Protocol from the official Windows lite host; guest flow, wrong-code rejection,
rotation, switching off, sign-in/sign-out verified with the official Mac
viewer. Signed-in assistance from another account is not yet verified.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Unofficial Linux host for NetEase UU Remote: X11 (production-tested on
GNOME/Ubuntu 24.04), experimental Wayland (Hyprland) and portal
(GNOME/KDE) backends; video, input, clipboard, file transfer, terminal,
sound, quality/fps/resolution settings, lock/unlock and system actions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>