Files
uu-remote-linux/src/desktop_power.rs
T
Jeff Zhang 8e30371317 feat(host): KDE Wayland privacy screen (RPC 7) (#146)
* feat(host): KDE Wayland 被控端防窥模式(隐私 / 关屏)

viewer RPC 7 打开防窥时,采集和输入切到 KWin 虚拟输出(portal ScreenCast VIRTUAL),
再用 kscreen-doctor 禁用物理屏;隐私模式随后重新启用物理屏并全屏覆盖桌面壁纸。
防窥期间通过 KWin InputDevice 禁用本地键鼠,指针/按键/文字改走 uinput
(KDE 不处理虚拟输出共享上的 portal 输入)。

- privacy_type 实测:1 关闭、2 隐私(壁纸)、3 关屏;SettingMetric 4/7 上报真实状态
- 恢复记录 + privacy-guard 子进程:主机以任何方式结束(含 SIGKILL)都恢复屏幕和输入
- src/privacy_screen/ 分层:控制器/协议/记录/守护/遮挡窗口共享,桌面实现走 Backend trait(kde/)
- portal:Session::set_virtual,闭包恢复按当前源重开;编码器随 portal 尺寸变化重建

Refs #140

* fix(privacy): 按 Mac 客户端协议应答防窥请求,修复授权竞态

- FeatureFlag ff_private_screen=2(ENHANCED_PRIVACY),声明支持关屏
- 先回 RPC 7 应答再切换,避免客户端超时报 9998;切换失败发 ReportError -7
- 应答 RPC 25 update_screen_saver_req(RpcResponse 21),隐私模式不再被中止
- SettingMetric 4/7 上报开关与最近一次模式(host_settings.json privacy_type),状态变化推送 SystemStateChange 5
- portal 会话串行打开,打开失败回填一次性授权:快速重连时防窥切换与闭包恢复并发曾清空保存的授权

字段号与枚举取自官方 Mac 客户端的 SwiftProtobuf name map。
已知限制:Mac 客户端防窥菜单切换后仍显示"不启用",实际模式正确。

Refs #140

* fix(privacy): 处理 #146 评审意见

- 预检 uinput:injector 未打开 uinput(/dev/uinput 不可用或 UU_INPUT_BACKEND=native)时,
  在改动输出和设备之前拒绝防窥(虚拟输出共享上 KDE 忽略 portal 输入)
- leave() 中输入设备恢复失败在恢复输出后向上返回,保留 privacy-power.json 与 guard
- record::ownership() 只缓存成功持锁,guard 轮询和 recover() 可重试
- 遮挡窗口就绪握手:privacy-wallpaper 建好窗口后输出 ready,5 秒内未就绪则报错并回滚
- rebase 到 main(#145):DMA-BUF 打开路径跳过虚拟输出、失败同样回填授权;
  #145 的 uinput 指针路径也按隐私模式的虚拟输出区域换算坐标
- README 表格压缩为一句,细节在 docs/privacy-screen.md

Refs #140

* docs(privacy): 注明 ff_system_metrics=3 对应的枚举

Refs #140

* fix(privacy): resolve lifecycle and restoration review findings
2026-11-02 01:14:10 +08:00

109 lines
3.9 KiB
Rust

//! Small GNOME-only display wake and idle-inhibition bridge.
#[cfg(all(target_os = "linux", feature = "portal"))]
mod native {
use std::{ffi::c_void, ptr::NonNull};
crate::engine_ffi! { crate::engine_plugin::Engine::Portal;
fn uu_desktop_power_wake() -> i32;
fn uu_desktop_idle_inhibitor_acquire(error: *mut i32) -> *mut c_void;
fn uu_desktop_idle_inhibitor_release(inhibitor: *mut c_void);
fn uu_desktop_screensaver_inhibitor_acquire(error: *mut i32) -> *mut c_void;
}
pub struct Handle(NonNull<c_void>);
// GDBusConnection is thread-safe; the C handle is only used by its single Drop call.
unsafe impl Send for Handle {}
impl Handle {
pub fn acquire(gnome: bool) -> Result<Self, String> {
let mut error = 0;
let pointer = unsafe { if gnome { uu_desktop_idle_inhibitor_acquire(&mut error) } else { uu_desktop_screensaver_inhibitor_acquire(&mut error) } };
NonNull::new(pointer).map(Self).ok_or_else(|| super::error("idle inhibition", error))
}
pub fn wake() -> Result<(), String> {
super::check("display wake", unsafe { uu_desktop_power_wake() })
}
}
impl Drop for Handle {
fn drop(&mut self) {
unsafe { uu_desktop_idle_inhibitor_release(self.0.as_ptr()) }
}
}
}
/// Set GNOME's display power-save mode to on. This does not unlock the session or change
/// lock-screen policy. Session-bus setup and each method call are bounded to three seconds.
pub fn wake() -> Result<(), String> {
if crate::privacy_screen::active() { return Ok(()); }
if !gnome_portal_active() {
return Ok(());
}
#[cfg(all(target_os = "linux", feature = "portal"))]
{
native::Handle::wake()
}
#[cfg(not(all(target_os = "linux", feature = "portal")))]
{
Ok(())
}
}
/// Holds an idle-only inhibitor until dropped: GNOME SessionManager on GNOME, the freedesktop
/// ScreenSaver interface on KDE (remote input through the portal does not count as activity
/// there, so the session locked mid-session, #61).
///
/// Acquire and drop perform blocking D-Bus work. Session-bus setup and each method call are
/// bounded to three seconds. Callers on an async runtime should move both operations to a
/// blocking worker.
pub struct IdleInhibitor {
#[cfg(all(target_os = "linux", feature = "portal"))]
_handle: Option<native::Handle>,
}
impl IdleInhibitor {
pub fn acquire() -> Result<Self, String> {
let kde = portal_desktop_is("kde");
if !gnome_portal_active() && !kde {
return Ok(Self {
#[cfg(all(target_os = "linux", feature = "portal"))]
_handle: None,
});
}
#[cfg(all(target_os = "linux", feature = "portal"))]
{
native::Handle::acquire(!kde).map(|handle| Self { _handle: Some(handle) })
}
#[cfg(not(all(target_os = "linux", feature = "portal")))]
{
Ok(Self {})
}
}
}
fn gnome_portal_active() -> bool { portal_desktop_is("gnome") }
fn portal_desktop_is(name: &str) -> bool {
let matches = std::env::var("XDG_CURRENT_DESKTOP").unwrap_or_default().split(':')
.any(|desktop| desktop.eq_ignore_ascii_case(name));
matches && crate::desktop_backend::detect().is_ok_and(|backend| backend == crate::desktop_backend::DesktopBackend::Portal)
}
#[cfg(all(target_os = "linux", feature = "portal"))]
fn check(operation: &str, code: i32) -> Result<(), String> {
if code == 0 { Ok(()) } else { Err(error(operation, code)) }
}
#[cfg(all(target_os = "linux", feature = "portal"))]
fn error(operation: &str, code: i32) -> String {
let reason = match code {
1 => "session D-Bus unavailable",
2 => "GNOME D-Bus operation failed",
_ => "GNOME D-Bus operation failed",
};
format!("{operation}: {reason} (code {code})")
}