235 Commits
Author SHA1 Message Date
VallierDevandClaude Opus 5.5 1e94175414 Release v0.2.33
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.33
2026-10-26 19:02:33 +08:00
VallierDevandClaude Opus 5.5 cfe9601874 WebRTC: restart a promoted desktop's video after its stream ended (#114)
A tool peer promoted by capture_desktop stayed marked as the desktop after its
encoder exited on its own (Wayland capture failing while locked/DPMS off), so a
later capture_desktop on the same peer only logged and never restarted the
video. Treat a finished stream task as ended: capture_desktop asks for the
desktop again and promote() restarts the video on the existing input lease.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-26 18:02:56 +08:00
VallierDevandClaude Opus 5.5 ab5d0a656b Release v0.2.32
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.32
2026-10-25 22:54:59 +08:00
VallierDevandClaude Opus 5.5 dcc67ed550 WebRTC: recompute the peer state from the real DTLS transport after ICE recovers
The ICE transport state callback was created before the DTLS transport and
captured the default placeholder, whose state never leaves New. Every later
ICE change therefore computed the peer state against a "New" DTLS: after a
brief ICE Disconnected -> Connected the PeerConnection settled on New instead
of Connected, so the idle room renewal treated the still-working
port-mapping peer as idle and tore the room down.

Wire the callback to the real DTLS transport through a weak slot filled right
after it is created.

Fixes #109

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-25 22:53:22 +08:00
liuyanghejerry bf7bd50062 viewer: forward mouse wheel events as mouse_scroll (#108)
SDL MouseWheel events had no arm in the event translator, so wheel input was dropped. Send one notch as 120 wire units (the Mac convention), use SDL's precise deltas for trackpads, honour the flipped direction for natural scrolling, and keep the existing focus and view-only gating.
2026-10-24 22:42:53 +08:00
liuyanghejerry 287b21a622 viewer: map pointer input to the content rectangle of the padded canvas (#107)
The CLI decoder pads every frame into a fixed 1920x1080 canvas so rawvideo frames have a known byte length. Input mapping and the SDL viewport treated that padded canvas as the picture, so non-16:9 hosts (official Macs are usually 16:10) had the pillarbox bars inside the 0..1 range: the remote pointer lagged inward and the error grew towards the screen edges.

Parse the coded picture size from ffmpeg's one-time "Video:" stream line, carry it on Frame.content, and render/map only the content sub-rectangle. 16:9 streams are unchanged; UU_VIEWER_SIZE keeps working.
2026-10-24 21:41:48 +08:00
Mr. ErrorandClaude Code bcde9f967c Signaling: keep heartbeat detection alive when delivery stalls (#104)
* Signaling: keep heartbeat detection alive when delivery stalls

The receive loop awaited event_sender.send() without a bound. When the main loop was parked in PeerConnection::close after a released peer, the 64-slot event queue filled and the receiver blocked inside the loop body, so the Engine.IO deadline in the same select! never ran. The host stayed online with a half-closed socket for hours.

- add a watchdog over the last inbound frame, independent of the receive loop
- bound event, pong and control sends with a timeout or try_send
- timeout PeerConnection::close so one dead peer cannot stall signaling
- regression test with a blocked event consumer

Co-Authored-By: Claude Code <[email protected]>

* Signaling: always report Disconnected when the receiver stops

The receive loop can break without enqueueing Disconnected: event delivery exceeded SEND_STALL_TIMEOUT, or the writer already stopped. receiver_done then lets the watchdog exit, while the main loop's rx_event stays open because the idle-renewal timer holds a sender. The host stays in a dead room until the 15-minute renewal, which is deferred while a peer is connected.

Hand a Disconnected off from a detached task after every loop exit. Duplicates are harmless: the main loop breaks on the first one and drops the old receiver.

The new test keeps the consumer blocked past SEND_STALL_TIMEOUT, then drains the queue and expects Disconnected.

Co-Authored-By: Claude Code <[email protected]>

---------

Co-authored-by: Claude Code <[email protected]>
2026-10-24 16:38:43 +08:00
VallierDevandClaude Opus 5.5 df9429495f Release v0.2.31
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.31
2026-10-24 11:15:00 +08:00
VallierDevandClaude Opus 5.5 ba82bc432a nvenc: opt-in UU_NVENC_BUFFER_MS VBV buffer for high-resolution keyframes (#103)
The 100-500 kbit NVENC default squeezes a 1440p IDR into ~62 KB, so the
picture blurs and sharpens once per GOP. Share the VAAPI buffer parser so
UU_NVENC_BUFFER_MS (10-1000 ms of the bitrate cap) applies to the FFmpeg
pipeline and the in-process engine; default unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-24 10:44:59 +08:00
VallierDevandClaude Opus 5.5 648eeca03d Release v0.2.30
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.30
2026-10-24 04:41:03 +08:00
VallierDevandClaude Opus 5.5 f97370782f Start the desktop on a tool connection when the viewer sends capture_desktop (#99) (#101)
When a port-mapping connection is already open, the Mac viewer opens the desktop by sending SimpleAction 4 (capture_desktop) on that connection's CONTROL channel instead of a new offer. The host now promotes that tool connection to the desktop: video, cursor, TEXT clipboard (with the capability echo replayed) and session counting follow a per-peer active flag. A later desktop demotes it without closing its port mappings. Stream tasks are fenced by an abort handle, and the X11 capture is rebuilt if the screen size changed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 13:40:14 -07:00
Jeff Zhangandferstar 8792fb4eca vaapi: raise the in-process RC max_qp to 51 so capped presets reach the QP 51 floor (#102)
Co-authored-by: ferstar <[email protected]>
2026-10-23 11:24:15 -07:00
VallierDevandClaude Opus 5.5 c041160d6d Release v0.2.29
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.29
2026-10-23 21:52:30 +08:00
VallierDevandClaude Opus 5.5 69aecf0269 X11: select one monitor with UU_X11_MULTISCREEN=1 (#100)
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 06:51:42 -07:00
VallierDevandClaude Opus 5.5 979b62d271 Issue template: keep peer and port-mapping log lines, drop webrtc noise, mask IPv6/MAC
The WARN filter let webrtc_ice/dtls lines push the useful ones out of the
last 80 lines (#99). Also mask IPv6 and MAC addresses, and ask for the
graphical session terminal: doctor from SSH/tty reports no DISPLAY.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 21:20:42 +08:00
Jeff Zhangandferstar 6a3da14961 Switch the desktop encoder on SIGUSR2 without dropping the session (#96)
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.

Co-authored-by: ferstar <[email protected]>
2026-10-23 03:24:29 -07:00
VallierDevandClaude Opus 5.5 792408e6f5 Release v0.2.28
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.28
2026-10-23 16:22:37 +08:00
VallierDevandClaude Opus 5.5 61c3f91e9e Install: install.sh installs FFmpeg; host notifies the desktop user when it is missing (#97)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 01:21:57 -07:00
VallierDevandClaude Opus 5.5 1bb43a9426 Release v0.2.27
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.27
2026-10-23 15:25:54 +08:00
Jeff Zhang 9d3b3da3f5 Video: probe the auto encoder in the background (NVENC then CPU) (#93)
Refs #85 (step 2).
2026-10-23 00:24:31 -07:00
阿夜 1009bdeaf2 fix(video): keep streaming after display wake failures (#95)
Fixes #94.
2026-10-22 21:24:51 -07:00
212duoand212duo fa7606894f feat(viewer): secure type input that reuses the open desktop session (#70)
Co-authored-by: 212duo <[email protected]>
2026-10-22 20:24:18 -07:00
963875516a Video: encoder and codec selection settings (set-encoder / set-codec) (#92)
Step 1 of #85: unified encoder/codec selection (host_settings.json > UU_VIDEO_* > auto), set-encoder / set-codec subcommands with locked merge writes, per-connection selection snapshot, doctor shows sources.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 16:24:22 -07:00
VallierDevandClaude Opus 5.5 b6703b19df Release v0.2.26
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.26
2026-10-22 23:54:56 +08:00
76a225a235 Tray: install the symbolic icon into the user hicolor theme (#90)
v0.2.25 showed KDE's unknown icon on Plasma 6.8 (#87). Plasma resolves
SNI icons theme by theme, trying dash-trimmed names in each theme before
the IconThemePath app theme, which comes last, so a cache-only icon is
easy to lose. Write it to $XDG_DATA_HOME/icons/hicolor (found by every
panel's default lookup; only when changed) and keep that as the theme
path. The new name "uuremote-tray-symbolic" cannot trim into the colored
"uu-remote-linux" app icon and avoids entries cached under the old name.

Checked with KIconLoader on Plasma 6.7 (Plasma's IconThemePath setup and
the global loader both resolve it, with the colored icon installed too).

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:54:23 -07:00
da99c1ceb4 NVENC: skip direct BGRA input when NVIDIA drives the display (#89)
#16: with display, capture and encode all on an RTX 5070 the packed-RGB
input path is 19% slower in the probe and 25% end to end than CPU
swscale, while on an iGPU-composited desktop it was neutral to faster.
Keep it on by default only when no connected DRM connector belongs to an
nvidia-bound card; UU_NVENC_RGB=1 forces it, =0 still disables it.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:12:31 -07:00
VallierDevandClaude Opus 5.5 0fe9b979e5 Release v0.2.25
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.25
2026-10-22 21:05:37 +08:00
cb4850d296 Tray: monochrome icon that follows light/dark panels (#88)
* Tray: monochrome icon that follows light/dark panels

The tray used the colored app icon (or the theme's "computer" when it was
not installed), which is hard to see on dark panels. Ship a 16px symbolic
icon embedded in the binary, write it to the user cache and pass that
directory as the indicator's icon theme path: GTK and the GNOME
AppIndicator extension recolor "-symbolic" names, KDE recolors the
ColorScheme-Text class. Fixes #87.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* AGENTS: config.json is parsed once, re-read only on LoginExpired

Reported in #85: the 60 s sleep is the room renewal poll, not a config reload.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 06:04:54 -07:00
VallierDevandClaude Opus 5.5 16ded48a99 Release v0.2.24
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.24
2026-10-22 17:45:03 +08:00
d95053d490 X11: change the desktop resolution for the viewer's choice; survive live resizes (#86)
* Restart X11 capture at the new size when the desktop is resized mid-stream

A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.

- When an X11 stream fails and the root size differs, skip the encoder
  fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
  engine's change flag, which a live stream may already have consumed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Change the X11 desktop resolution when the viewer picks one

The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.

On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 02:44:18 -07:00
VallierDevandClaude Opus 5.5 50ed54d77a Release v0.2.23
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.23
2026-10-22 16:34:37 +08:00
d6752e77c8 Fix SRTP rollover counter rewinding on delayed NACK retransmissions (#83) (#84)
webrtc-srtp 0.12.0 stored every sequence number and used a 100-packet window to
guess the rollover counter. A NACK retransmission of a pre-wrap packet sent after
the wrap (65000 after 85) rewound that state, so the next new packets were
protected with ROC+1 and the viewer failed authentication on all of them: frozen
video after the Windows viewer returned from the background.

Vendor webrtc-srtp 0.12.0 with the RFC 3711 Appendix A half-space estimate and a
high-water index that retransmissions cannot move back. Regression tests fail on
upstream (65000 != 85) and pass with the fix for AES-CM/HMAC and AES-GCM.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: AYssu <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 01:34:07 -07:00
VallierDevandClaude Opus 5.5 9906dd4767 Release v0.2.22
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.22
2026-10-22 15:14:55 +08:00
Jeff Zhang 9e2198b03d docs: AMD VAAPI verified on the in-process engine; CPU cost figures (#81)
README/README.en/AGENTS: AMD iGPUs (HawkPoint, Cezanne) are accepted on the inproc-av VAAPI engine with the official
Mac viewer; the FFmpeg process pipeline on AMD is not separately verified. inproc-av now covers VAAPI in process;
build headers listed. Thanks @ferstar.
2026-10-21 22:24:42 -07:00
Jeff Zhang 21c01d2e18 inproc-av: native VAAPI H.264/HEVC through DRI3 DMA-BUF, VPP and VCN (#80)
With --features inproc-av on X11 and UU_VIDEO_ENCODER=vaapi, VAAPI runs in process: a DRI3 DMA-BUF of the root
(XShm upload without DRI3) goes through VPP to NV12 and the hardware encoder. SPS/PPS(/VPS) and slice headers are
packed by the host because radeonsi (Mesa 26) does not write them. libva/libva-drm are dlopen'ed; release builds do
not enable inproc-av. The NVENC path is unchanged.

Accepted by the contributor on AMD HawkPoint1 (Mesa 26.2.3), 1920x1200@60, with the official Mac viewer
(HEVC, presets, fps, scaling). Intel iHD and 4K are not verified. Thanks @ferstar.
2026-10-21 15:25:13 -07:00
059a3b1bb8 inproc-av: 4:4:4 on the native NVENC engine (#76, #77)
H.264 High 4:4:4 / HEVC FRExt with chromaFormatIDC 3 and AQ off when 真彩 is requested; GPUs without YUV444 encode fail the capability check and fall back. full_chroma_available() no longer excludes the in-process path. UU_PROBE_CHROMA=444 for the probe.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 08:24:32 -07:00
76941459cc inproc-av: native in-process NVENC reading XShm directly (#74, #75)
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 07:26:45 -07:00
1fa346fd1f device_capability: list every supported format with its size, not 0x0 (#79)
The official viewer (libstreamer, Mac 4.43) treats a video_codec_capability entry
with width or height 0 as unsupported. The 4.37 Windows host we copied in #49 ran on
a GTX 660 without HEVC/4:4:4, so its 0x0 entries meant exactly that. Evidence by
@ferstar in #77.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: ferstar <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-21 21:29:23 +08:00
VallierDevandClaude Opus 5.5 e09778cc94 Release v0.2.21: Wayland without virtual pointer/keyboard, systemd unit docs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.21
2026-10-21 21:05:58 +08:00
VallierDevandClaude Opus 5.5 b1da297e42 Wayland: only a missing virtual pointer falls back to uinput (#78)
uu_wl_move returns -2 only when the compositor has no wlr-virtual-pointer; other failures are returned as before. Document UU_WAYLAND_NO_VIRTUAL_KEYBOARD.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 21:05:11 +08:00
ossSBandClaude Opus 5.5 c739036301 Wayland: virtual pointer and keyboard are optional; capture still starts (#72, #73)
Compositors without wlr-virtual-pointer, or that restrict the virtual keyboard to their input method (Denial), now bring up capture and fall back to uinput for input. UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1 skips the virtual keyboard.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 16:29:19 +08:00
25893cd4ab docs: align the user systemd unit with the deb package unit (#69)
Drop the hard-coded DISPLAY=:0 and install under graphical-session.target like packaging/deb; Xfce/i3, headless and the virtual desktop keep WantedBy=default.target. AGENTS.md recipe aligned.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 22:42:11 +08:00
VallierDevandClaude Opus 5.5 5089c0343c Release v0.2.20: QR sign-in matches the official client (#68)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.20
2026-10-20 17:03:13 +08:00
VallierDevandClaude Opus 5.5 5fdb98b0f5 QR login follows the official client: status_query_ticket, 60 s long poll, stop on failure (#68)
From the official Mac client (UURemote 4.42; QRCodeGenLoginResponse decodes only qrcode_jump_url
and status_query_ticket, the status/by_qrcode bodies carry that ticket under "token"):
- gen/login is sent without a body; the status ticket is status_query_ticket (older token as fallback).
- The status long poll re-asks right after each answer with a 60 s request timeout (was 12 s).
- Status 3 regenerates at once, status 0 after 0.35 s, 4 logs in (3 no longer calls by_qrcode).
- Errors such as HTTP 400 code 1190 and timeouts stop polling until the user clicks the new
  刷新二维码 button (Enter in a terminal; one minute when neither exists). This replaces the
  v0.2.19 backoff and the re-register hint.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:58:00 +08:00
VallierDevandClaude Opus 5.5 89abae2369 Release v0.2.19: headless Wayland, custom bitrate, show and login fixes
Co-Authored-By: Claude Opus 5.5 <[email protected]>
v0.2.19
2026-10-20 16:34:37 +08:00
VallierDevandClaude Opus 5.5 0afc602e66 Login polling backoff and a hint for instantly expiring QR codes (#68); bitrate unit safeguard; doctor wording
- Never spin on immediate unchanged status answers or transport errors (2 s backoff); repeated
  QR codes that expire within seconds back off exponentially and point to re-registering the
  device identity, which recovered a flagged device in #68.
- Custom bitrate field 8 is bit/s (#67); values that can only be Mbit/s or kbit/s are scaled
  instead of capping the encoder at 1 kbit/s.
- doctor: without DISPLAY the X11 engine still tries :0/:1, so the #66 warning says that.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:29:57 +08:00
ZoranandJuanZoran 762cfccc44 Custom video bitrate is bits per second (#67)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 16:28:56 +08:00
axlrose 9520b69730 doctor: say so when the session has no screen to capture (#66)
Without DISPLAY and without WAYLAND_DISPLAY the desktop backend cannot
capture anything: the host logs 'Desktop unavailable ... x11_init failed'.
The report named X11 as the selected backend and nothing else, which reads
like a working setup. Name the missing display and note that the terminal,
file transfer and port mapping tools still work.
2026-10-20 16:28:51 +08:00
axlrose c45e4749b5 Wayland: a failed output-power handshake must not block screencopy (#65)
Output power management is optional: the engine comment already says so, but
uu_wl_wake() only tolerated a *missing* power manager. When the compositor
offers zwlr_output_power_manager_v1 and then refuses the mode (headless
outputs, outputs without DPMS), power_failed is set and the function
reported an error. capture::keep_display_awake() propagates that error and
video.rs aborts the whole capture task with '?', so a client could connect
but never received a frame.

Treat a failed power handshake like a missing one: skip waking the screen
and keep streaming.
2026-10-20 16:28:46 +08:00
VallierDevandClaude Opus 5.5 c1b8bfe1b3 show: report a skipped or crash-looping service instead of waiting 30 s (#62); document FFmpeg 6.x for inproc-av (#63)
systemctl start returns 0 when the unit is skipped by a Condition or keeps crashing under
Restart=; show now reads ActiveState/SubState/ConditionResult while waiting and names the real
problem. ffmpeg-sys-next's build script runs before ours, so FFmpeg >= 7 cannot be caught in
build.rs; the README and AGENTS state the 6.x requirement next to the build commands.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 15:24:33 +08:00