76 Commits
Author SHA1 Message Date
VallierDevandClaude Opus 5.5 ba82bc432a nvenc: opt-in UU_NVENC_BUFFER_MS VBV buffer for high-resolution keyframes (#103)
The 100-500 kbit NVENC default squeezes a 1440p IDR into ~62 KB, so the
picture blurs and sharpens once per GOP. Share the VAAPI buffer parser so
UU_NVENC_BUFFER_MS (10-1000 ms of the bitrate cap) applies to the FFmpeg
pipeline and the in-process engine; default unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-24 10:44:59 +08:00
VallierDevandClaude Opus 5.5 69aecf0269 X11: select one monitor with UU_X11_MULTISCREEN=1 (#100)
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 06:51:42 -07:00
Jeff Zhangandferstar 6a3da14961 Switch the desktop encoder on SIGUSR2 without dropping the session (#96)
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.

Co-authored-by: ferstar <[email protected]>
2026-10-23 03:24:29 -07:00
VallierDevandClaude Opus 5.5 61c3f91e9e Install: install.sh installs FFmpeg; host notifies the desktop user when it is missing (#97)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 01:21:57 -07:00
Jeff Zhang 9d3b3da3f5 Video: probe the auto encoder in the background (NVENC then CPU) (#93)
Refs #85 (step 2).
2026-10-23 00:24:31 -07:00
阿夜 1009bdeaf2 fix(video): keep streaming after display wake failures (#95)
Fixes #94.
2026-10-22 21:24:51 -07:00
212duoand212duo fa7606894f feat(viewer): secure type input that reuses the open desktop session (#70)
Co-authored-by: 212duo <[email protected]>
2026-10-22 20:24:18 -07:00
963875516a Video: encoder and codec selection settings (set-encoder / set-codec) (#92)
Step 1 of #85: unified encoder/codec selection (host_settings.json > UU_VIDEO_* > auto), set-encoder / set-codec subcommands with locked merge writes, per-connection selection snapshot, doctor shows sources.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 16:24:22 -07:00
da99c1ceb4 NVENC: skip direct BGRA input when NVIDIA drives the display (#89)
#16: with display, capture and encode all on an RTX 5070 the packed-RGB
input path is 19% slower in the probe and 25% end to end than CPU
swscale, while on an iGPU-composited desktop it was neutral to faster.
Keep it on by default only when no connected DRM connector belongs to an
nvidia-bound card; UU_NVENC_RGB=1 forces it, =0 still disables it.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:12:31 -07:00
d95053d490 X11: change the desktop resolution for the viewer's choice; survive live resizes (#86)
* Restart X11 capture at the new size when the desktop is resized mid-stream

A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.

- When an X11 stream fails and the root size differs, skip the encoder
  fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
  engine's change flag, which a live stream may already have consumed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Change the X11 desktop resolution when the viewer picks one

The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.

On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 02:44:18 -07:00
Jeff Zhang 9e2198b03d docs: AMD VAAPI verified on the in-process engine; CPU cost figures (#81)
README/README.en/AGENTS: AMD iGPUs (HawkPoint, Cezanne) are accepted on the inproc-av VAAPI engine with the official
Mac viewer; the FFmpeg process pipeline on AMD is not separately verified. inproc-av now covers VAAPI in process;
build headers listed. Thanks @ferstar.
2026-10-21 22:24:42 -07:00
059a3b1bb8 inproc-av: 4:4:4 on the native NVENC engine (#76, #77)
H.264 High 4:4:4 / HEVC FRExt with chromaFormatIDC 3 and AQ off when 真彩 is requested; GPUs without YUV444 encode fail the capability check and fall back. full_chroma_available() no longer excludes the in-process path. UU_PROBE_CHROMA=444 for the probe.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 08:24:32 -07:00
76941459cc inproc-av: native in-process NVENC reading XShm directly (#74, #75)
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 07:26:45 -07:00
VallierDevandClaude Opus 5.5 b1da297e42 Wayland: only a missing virtual pointer falls back to uinput (#78)
uu_wl_move returns -2 only when the compositor has no wlr-virtual-pointer; other failures are returned as before. Document UU_WAYLAND_NO_VIRTUAL_KEYBOARD.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 21:05:11 +08:00
25893cd4ab docs: align the user systemd unit with the deb package unit (#69)
Drop the hard-coded DISPLAY=:0 and install under graphical-session.target like packaging/deb; Xfce/i3, headless and the virtual desktop keep WantedBy=default.target. AGENTS.md recipe aligned.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 22:42:11 +08:00
ZoranandJuanZoran 762cfccc44 Custom video bitrate is bits per second (#67)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 16:28:56 +08:00
VallierDevandClaude Opus 5.5 c1b8bfe1b3 show: report a skipped or crash-looping service instead of waiting 30 s (#62); document FFmpeg 6.x for inproc-av (#63)
systemctl start returns 0 when the unit is skipped by a Condition or keeps crashing under
Restart=; show now reads ActiveState/SubState/ConditionResult while waiting and names the real
problem. ffmpeg-sys-next's build script runs before ours, so FFmpeg >= 7 cannot be caught in
build.rs; the README and AGENTS state the 6.x requirement next to the build commands.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 15:24:33 +08:00
VallierDevandClaude Opus 5.5 5949314e55 Experimental WOL helper (UU_WOL_HELPER=1); doctor keeps logs quiet
Mirrors the official Windows host (GameViewerServer reportLanInfo / PushMessageHandler::wakeOnLan /
send_wol): report the LAN identity after sign-in and answer wake_on_lan pushes with a magic packet
to the target's subnet broadcast. Field names come from the official log strings; off by default
and unverified end to end. wake_on_lan push key names are always logged for evidence.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:43:13 +08:00
VallierDevandClaude Opus 5.5 8389fc4eed Debian package: binaries, engine plugins, systemd user unit, menu entries
Built and install-tested in the release workflow (and CI) with dependencies taken from the
binaries by dpkg-shlibdeps. The unit starts with graphical-session.target; uinput access stays
opt-in (the udev rule ships under /usr/share/doc).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:38:39 +08:00
VallierDevandClaude Opus 5.5 554cbe806a doctor: one paste-safe diagnostic report for issues
Session, selected backend (and the X11-inside-Wayland trap), engine plugin load results, uinput
and render-node access, FFmpeg encoders/version, the default codec, sign-in and service state.
Prints booleans, names and versions only; home directory and user name are masked. The issue
template and READMEs ask for it.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:30:01 +08:00
VallierDevandClaude Opus 5.5 6733a117a2 CPU hosts default to H.264; aarch64 release package (#59)
libx265 is about ten times slower than libx264 (15 vs 155 fps at 1080p on a 4-core Ampere A1),
so without NVENC/VAAPI the host now picks H.264 even when both sides offer H.265;
UU_VIDEO_CODEC=h265 still forces it. The release workflow builds x86_64 and aarch64 packages
(each with both engine plugins) and publishes them from a single job.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 01:28:38 +08:00
ZoranandJuanZoran d90b4bccde Hyprland: bind absolute pointer to the captured output; opt-in monitor switching (#57)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 00:33:31 +08:00
VallierDevandClaude Opus 5.5 65c04e796a One release package for every desktop: Wayland and portal engines as runtime plugins
The release tarball was X11 only, so Hyprland/niri and GNOME/KDE Wayland users had to build from
source (#43, #54). With --features engine-plugins the wayland and portal engines are built as
libuu-wayland.so / libuu-portal.so and dlopen'ed only when the session selects them, so X11 hosts
need none of their libraries. The wayland plugin is built on Ubuntu 22.04 with the main binary;
the portal plugin needs libei >= 1.1 and is built on 24.04 (glibc >= 2.39). Source builds without
engine-plugins keep linking the engines statically.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 22:10:11 +08:00
VallierDevandClaude Opus 5.5 949acaac30 docs: niri row, non-template unit name, uinput dedicated-group example (#55)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 16:23:52 +08:00
aresbit 6416f75b7f auth: bypass ambient proxies by default; UU_USE_PROXY=1 opts in (#52)
A local HTTP/SOCKS proxy that intercepts TLS caused login to fail with
"tls handshake eof". Build all cloud API clients with no_proxy() unless
UU_USE_PROXY is explicitly truthy, so direct connections are the default
and environments that genuinely need a proxy can still enable it.
2026-10-19 10:25:58 +08:00
VallierDevandClaude Opus 5.5 19d0563781 desktop: viewer launcher entry and window icon; explicit StartupWMClass (#13)
The viewer's GTK windows had no icon and no desktop entry, so docks showed a
generic icon next to the host's. Add uu-remote-linux-viewer.desktop and use the
host icon for viewer windows.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 17:25:14 +08:00
ca49232674 HEVC: split access units by picture boundaries; no -aud for hevc_vaapi (#48)
* HEVC: split access units by picture boundaries, and stop passing -aud to hevc_vaapi

hevc_vaapi with `-aud 1` writes an AUD only at IRAPs and drops every other picture from
the bitstream: a 90-frame 640x360 clip came out as 3 IDRs and no P-frames. The reader
splits access units on AUDs, so each "frame" became one IDR plus a whole GOP, and the
IRAP gate then rejected all of them - the H.265 path sent no video at all (measured
~12 kbit/s outbound against 4-6 Mbit/s for H.264).

HEVC now leaves AUD off and hevc_au_offsets() splits on RFC 7798 picture boundaries (an
AUD, or the first NAL after a VCL NAL that is non-VCL or starts a picture), which also
keeps multi-slice pictures in one unit and covers the libx265/NVENC shapes. Parameter
sets still repeat in-band ahead of every IDR, so no out-of-band sprop is needed.

The fixed-input probe hardcoded H.264 in three places (settings, output muxer, first-unit
check), which is why this path was never measurable; it now follows UU_VIDEO_CODEC.

Verified with desktop-video-probe (90-frame fixed input): hevc_vaapi and libx265 both
emit 90 frames, first unit an IRAP with its parameter sets.

Assisted-by: DeepSeek V4.1 Flash-1017

* HEVC: keep suffix SEI, filler and end markers with the preceding picture

RFC 7798 / H.265 7.4.2.4.4 lets only AUD, VPS/SPS/PPS, prefix SEI and types
41-44/48-55 open an access unit; trailing NALs stay with the picture. Verified on
an RTX 3090 with the fixed-input probe: hevc_nvenc and libx265 both yield 90/90
decodable units with an IRAP first.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-18 16:32:35 +08:00
NuoFang cb8253febf VAAPI: opt-in UU_VAAPI_BUFFER_MS for the VBV buffer (#47)
The 100-500 kbit default keeps NVENC keyframes inside the buffer, but VAAPI quantizes a
whole desktop keyframe when the buffer is that small: on a 2560x1440 H.264 VAAPI stream
capped at 30 Mbit/s the first IDR measured 59,910 bytes and the picture blurred once per
GOP before sharpening back.

UU_VAAPI_BUFFER_MS (10-1000 ms, VAAPI only) sizes the buffer as bitrate x ms/1000. With
250 ms on the same input the first IDR measured 142,397 bytes and the worst-frame Y-SSIM
over 180 static frames went from 0.9492 to 0.9933, with no rise in average bitrate.

Opt-in: unset, out of range or unparsable keeps the old buffer.

Assisted-by: DeepSeek V4.1 Flash-1017
2026-10-18 15:31:00 +08:00
VallierDevandClaude Opus 5.5 696cf10e33 docs: NAS Docker deployment guide; link it and the ghcr image from the READMEs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 11:52:36 +08:00
VallierDevandClaude Opus 5.5 c9e5fec175 docker: headless NAS container (Synology); publish ghcr image on release
docker/Dockerfile installs the release binary on Ubuntu 24.04 with the X11/GTK runtime
libs, headless (UU_DESKTOP_BACKEND=none), config in /config, data in /data. Verified
on Synology DSM 7.3: file transfer (sha256 round trip), terminal and port mapping
to the DSM web UI. Release workflow now pushes ghcr.io/vallierdev/uu-remote-linux.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 11:43:58 +08:00
jo32 e4a2cc4698 contrib: macOS SSH companion for Finder file paste uploads (#45)
* Add macOS SSH companion for Finder file paste uploads

* Show measured upload progress in Ghostty title and progress bar
2026-10-18 08:50:45 +08:00
VallierDevandClaude Opus 5.5 72c1e6101f docs: introduce the experimental viewer in the README title and intro (#44)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 01:23:46 +08:00
VallierDevandClaude Opus 5.5 a67731052f docs: show the viewer screenshot first; fix the host screenshot caption
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 00:04:58 +08:00
VallierDevandClaude Opus 5.5 e6089bfb46 docs: add the viewer launcher screenshot (device names redacted)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 00:02:25 +08:00
VallierDevandClaude Opus 5.5 2815a01569 feat(viewer): remove a device from the account (unbind)
POST /api/v1/device/{id}/unbind, the path the official Windows host and Mac
viewer use for 「删除设备」. Verified live on a disposable test device; the
shared-device path (/api/v1/device/share/{id}/unbind) comes from strings only.
CLI: uuremote-viewer unbind DEVICE [--shared]; launcher: 更多工具 → 删除设备
with a confirmation dialog.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 22:26:14 +08:00
VallierDevandClaude Opus 5.5 664c96941c Release v0.2.3
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 20:25:25 +08:00
wanglz111 8967dfdd4b fix(viewer): reuse the SDL window for clipboard to stop GNOME Dock churn (#41)
* Fix viewer Dock churn by reusing SDL clipboard window

* Handle clipboard text boundaries and read only after changes

* Keep SDL clipboard scoped to the focused desktop and validate CI call sites
2026-10-17 20:24:07 +08:00
wanglz111 3d4d8d1d64 fix(viewer): use native keycodes for Mac targets; ffmpeg 4.4 compatible decoding (#40)
* fix(viewer): send native keycodes to Mac targets

* fix(viewer): reject unknown keyboard target platforms

* fix(viewer): support FFmpeg 4.4 passthrough decoding
2026-10-17 18:58:57 +08:00
VallierDevandClaude Opus 5.5 843e4aa342 Release v0.2.2
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 18:57:22 +08:00
VallierDevandClaude Opus 5.5 9a91000e0a docs: H.265 and 4:4:4 tested live against this project's host
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 17:17:19 +08:00
VallierDevandClaude Opus 5.5 693660ed85 viewer: decode H.265 and request 4:4:4
Offer H.265 (RFC 7798) next to H.264 and list H.265 and 4:4:4 decoder
caps; the host picks the codec. Depacketize single NAL, AP and FU units
with the existing reorder/loss handling and decode with the ffmpeg CLI
(-f hevc). UU_VIEWER_CHROMA=444 requests true color via
CaptureSettingRequest field 7 and follows CaptureSettingSync;
UU_VIEWER_CODEC=h264 keeps H.264 only.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 17:11:45 +08:00
VallierDevandClaude Opus 5.5 94fd3c2fa7 fix(actions): never wait for a polkit prompt on remote reboot/shutdown
Without polkit permission (for example no active local session)
systemctl reboot/poweroff waited for an authentication dialog on the
controlled screen. Pass --no-ask-password so the action fails and is
logged instead. README: the viewer's terminal session list, reboot and
shutdown, and its Wayland window/clipboard were tested in a VM.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 16:31:41 +08:00
809ce1697d Add the experimental native viewer (uuremote-viewer) (#36)
* Add the experimental native viewer (uuremote-viewer)

A Linux viewer/controller for UU Remote hosts, built separately with
--features native-viewer,viewer-sdl; the host build and behaviour are
unchanged.

- Cloud join by device and remote assistance by share ID + code (code
  via stdin only), WebRTC offer side, SDL desktop window with ffmpeg CLI
  H.264 decoding, Opus sound, keyboard/mouse, view-only mode, text
  clipboard on TEXT_DATA_CHANNEL.
- Tools: file browser/transfer (zero- and one-based download blocks),
  terminal and terminal session list, port mapping (127.0.0.1 only),
  reboot/shutdown; tools reuse the desktop peer while one is open.
- GTK launcher with device list and tool windows.
- CI builds and tests the viewer; release tarballs include it.

Logs carry field numbers, sizes and states only.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* ci: install the ffmpeg CLI for the viewer audio tests

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-17 15:41:20 +08:00
25edc41b9f fix(portal): recover capture sooner after GNOME display changes (#35)
* fix(portal): recover capture sooner after GNOME display changes

Use Mutter notifications to enable a 200 ms grace for correlated, continuously paused capture without a valid format. Cancel stale hints on healthy renegotiation and retain the five-second fallback.

Test event ordering, repeated and stale notifications, natural recovery, and subscription teardown. Document measured recovery gains and limits.

Fixes #27

* docs: keep the #27 experiment record in the PR instead of the repository

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-17 14:26:54 +08:00
cc01b3e2a5 fix(portal): send black video while locked so iPhone starts auto unlock (#34)
* fix(portal): bootstrap video for iPhone locked auto unlock

* docs: keep the #29 experiment record in the PR instead of the repository

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-17 11:44:15 +08:00
bb95774ecb fix(portal): establish desktop CONTROL while GNOME is locked and auto unlock cold connections (#30)
* fix(portal): establish locked desktop control before capture

* test(portal): preserve v4 pixel inventory after deferred capture settings

* fix(control): refresh lock state after viewer Echo handshake

* fix(portal): announce desktop target before locked capture wait

* ci: run the desktop_power native test under ASan/UBSan

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* input: skip the Portal release sweep while no session is bound

The first locked connection creates its peer before any Portal exists; the sweep
then logged two failed injections and a 'reset incomplete' warning for nothing.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* docs: describe locked cold connections, auto unlock limits and iPhone status

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(portal): treat a cached screen with a closed Portal session as not ready

begin() now marks the state as waiting when the cached session is dead, and
permission/video/clipboard consumers honor it instead of reporting Allow and
starting the stale video path before maintain() has rebuilt capture.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(portal): gate input on a ready desktop and share recovery backoff

Input dispatch kept only the cached screen and dropped State.waiting, so a closed
Portal passed the gate once the screen unlocked. The supervisor's recover() and the
encoder's stream-loss recovery now share failure backoff and a terminal-denial flag,
so a denied consent is not re-prompted by the other path.

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>

* fix(control): keep unknown lock state unlocked, stop waits on Closing, never drop capture settings

- QuerySystemState with no logind lock state (Xvfb/linger) reports unlocked as before.
- The Portal wait loop also exits while the channel is Closing.
- Capture-setting requests back-pressure instead of try_send dropping the latest setting.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Sonnet 5.5 <[email protected]>
Co-authored-by: VallierDev <[email protected]>
2026-10-17 10:48:43 +08:00
VallierDevandClaude Opus 5.5 b0beba1a4e desktop-video-probe: fixed input via UU_PROBE_INPUT (#9)
UU_PROBE_INPUT=<video or image sequence> bypasses desktop capture and encodes
the file with the production FFmpeg encoder arguments, so encoder
measurements no longer depend on desktop content; UU_PROBE_LOOP=1 repeats the
input up to UU_PROBE_FRAMES. Missing/undecodable input exits non-zero. The
session path is unchanged. Verified with Y4M, MP4 and PNG sequences (repeat
runs byte-identical); NVENC/VAAPI not hardware-verified.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 01:50:24 +08:00
wanglz111 f35ec3b2c7 Portal: recover capture after live scaling changes (#26)
* fix(portal): recover capture after live scaling changes

* fix(portal): keep input available during session recovery

* fix(portal): serialize reconnect recovery and throttle lock probes
2026-10-17 01:08:32 +08:00
wanglz111 b20fd6ccef Portal: map scaled GNOME input through EIS regions (#24)
* fix(portal): map scaled GNOME input through EIS regions

Keep unsupported portals on legacy input and leave capture/uinput independent of EIS. Cache logical geometry without the native handle lock and reject geometry changes during recovery.

Add native capability, handshake, geometry and lifecycle regression coverage with sanitizer checks; preserve existing non-portal paths. Refs #23.

* fix(portal): keep version 4 capture settings in pixel coordinates

Keep native, selectable and current screen rectangles in pixels with DPR 1 so legacy setting requests cannot implicitly downscale a scaled desktop. Leave Portal and EIS coordinate mapping local and unchanged.

Add inventory/request/ack/sync roundtrip regression coverage, including repeated settings changes and restoring native output. Refs #23.
2026-10-16 21:45:17 +08:00
VallierDevandClaude Opus 5.5 b63bedd4dc Repaint full-screen terminal programs on reattach; ABR for libx265 bitrate presets
Reattaching replays the scrollback tail, which starts mid-redraw for
full-screen programs (tmux, vim, TUIs), and an unchanged size raises no
SIGWINCH. Shrink the PTY by one row and restore the latest requested size
after a pause so the program repaints (#17).

Apply the #15 ABR change to the libx265 path as well, clarify the
non-wayland build error, and document the Wayland systemd unit and uinput
module autoload (#16).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-16 01:30:09 +08:00