133 Commits
Author SHA1 Message Date
VallierDevandClaude Opus 5.5 cfe9601874 WebRTC: restart a promoted desktop's video after its stream ended (#114)
A tool peer promoted by capture_desktop stayed marked as the desktop after its
encoder exited on its own (Wayland capture failing while locked/DPMS off), so a
later capture_desktop on the same peer only logged and never restarted the
video. Treat a finished stream task as ended: capture_desktop asks for the
desktop again and promote() restarts the video on the existing input lease.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-26 18:02:56 +08:00
liuyanghejerry bf7bd50062 viewer: forward mouse wheel events as mouse_scroll (#108)
SDL MouseWheel events had no arm in the event translator, so wheel input was dropped. Send one notch as 120 wire units (the Mac convention), use SDL's precise deltas for trackpads, honour the flipped direction for natural scrolling, and keep the existing focus and view-only gating.
2026-10-24 22:42:53 +08:00
liuyanghejerry 287b21a622 viewer: map pointer input to the content rectangle of the padded canvas (#107)
The CLI decoder pads every frame into a fixed 1920x1080 canvas so rawvideo frames have a known byte length. Input mapping and the SDL viewport treated that padded canvas as the picture, so non-16:9 hosts (official Macs are usually 16:10) had the pillarbox bars inside the 0..1 range: the remote pointer lagged inward and the error grew towards the screen edges.

Parse the coded picture size from ffmpeg's one-time "Video:" stream line, carry it on Frame.content, and render/map only the content sub-rectangle. 16:9 streams are unchanged; UU_VIEWER_SIZE keeps working.
2026-10-24 21:41:48 +08:00
Mr. ErrorandClaude Code bcde9f967c Signaling: keep heartbeat detection alive when delivery stalls (#104)
* Signaling: keep heartbeat detection alive when delivery stalls

The receive loop awaited event_sender.send() without a bound. When the main loop was parked in PeerConnection::close after a released peer, the 64-slot event queue filled and the receiver blocked inside the loop body, so the Engine.IO deadline in the same select! never ran. The host stayed online with a half-closed socket for hours.

- add a watchdog over the last inbound frame, independent of the receive loop
- bound event, pong and control sends with a timeout or try_send
- timeout PeerConnection::close so one dead peer cannot stall signaling
- regression test with a blocked event consumer

Co-Authored-By: Claude Code <[email protected]>

* Signaling: always report Disconnected when the receiver stops

The receive loop can break without enqueueing Disconnected: event delivery exceeded SEND_STALL_TIMEOUT, or the writer already stopped. receiver_done then lets the watchdog exit, while the main loop's rx_event stays open because the idle-renewal timer holds a sender. The host stays in a dead room until the 15-minute renewal, which is deferred while a peer is connected.

Hand a Disconnected off from a detached task after every loop exit. Duplicates are harmless: the main loop breaks on the first one and drops the old receiver.

The new test keeps the consumer blocked past SEND_STALL_TIMEOUT, then drains the queue and expects Disconnected.

Co-Authored-By: Claude Code <[email protected]>

---------

Co-authored-by: Claude Code <[email protected]>
2026-10-24 16:38:43 +08:00
VallierDevandClaude Opus 5.5 ba82bc432a nvenc: opt-in UU_NVENC_BUFFER_MS VBV buffer for high-resolution keyframes (#103)
The 100-500 kbit NVENC default squeezes a 1440p IDR into ~62 KB, so the
picture blurs and sharpens once per GOP. Share the VAAPI buffer parser so
UU_NVENC_BUFFER_MS (10-1000 ms of the bitrate cap) applies to the FFmpeg
pipeline and the in-process engine; default unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-24 10:44:59 +08:00
VallierDevandClaude Opus 5.5 f97370782f Start the desktop on a tool connection when the viewer sends capture_desktop (#99) (#101)
When a port-mapping connection is already open, the Mac viewer opens the desktop by sending SimpleAction 4 (capture_desktop) on that connection's CONTROL channel instead of a new offer. The host now promotes that tool connection to the desktop: video, cursor, TEXT clipboard (with the capability echo replayed) and session counting follow a per-peer active flag. A later desktop demotes it without closing its port mappings. Stream tasks are fenced by an abort handle, and the X11 capture is rebuilt if the screen size changed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 13:40:14 -07:00
VallierDevandClaude Opus 5.5 69aecf0269 X11: select one monitor with UU_X11_MULTISCREEN=1 (#100)
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 06:51:42 -07:00
Jeff Zhangandferstar 6a3da14961 Switch the desktop encoder on SIGUSR2 without dropping the session (#96)
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.

Co-authored-by: ferstar <[email protected]>
2026-10-23 03:24:29 -07:00
VallierDevandClaude Opus 5.5 61c3f91e9e Install: install.sh installs FFmpeg; host notifies the desktop user when it is missing (#97)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 01:21:57 -07:00
Jeff Zhang 9d3b3da3f5 Video: probe the auto encoder in the background (NVENC then CPU) (#93)
Refs #85 (step 2).
2026-10-23 00:24:31 -07:00
阿夜 1009bdeaf2 fix(video): keep streaming after display wake failures (#95)
Fixes #94.
2026-10-22 21:24:51 -07:00
212duoand212duo fa7606894f feat(viewer): secure type input that reuses the open desktop session (#70)
Co-authored-by: 212duo <[email protected]>
2026-10-22 20:24:18 -07:00
963875516a Video: encoder and codec selection settings (set-encoder / set-codec) (#92)
Step 1 of #85: unified encoder/codec selection (host_settings.json > UU_VIDEO_* > auto), set-encoder / set-codec subcommands with locked merge writes, per-connection selection snapshot, doctor shows sources.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 16:24:22 -07:00
da99c1ceb4 NVENC: skip direct BGRA input when NVIDIA drives the display (#89)
#16: with display, capture and encode all on an RTX 5070 the packed-RGB
input path is 19% slower in the probe and 25% end to end than CPU
swscale, while on an iGPU-composited desktop it was neutral to faster.
Keep it on by default only when no connected DRM connector belongs to an
nvidia-bound card; UU_NVENC_RGB=1 forces it, =0 still disables it.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:12:31 -07:00
d95053d490 X11: change the desktop resolution for the viewer's choice; survive live resizes (#86)
* Restart X11 capture at the new size when the desktop is resized mid-stream

A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.

- When an X11 stream fails and the root size differs, skip the encoder
  fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
  engine's change flag, which a live stream may already have consumed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Change the X11 desktop resolution when the viewer picks one

The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.

On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 02:44:18 -07:00
Jeff Zhang 21c01d2e18 inproc-av: native VAAPI H.264/HEVC through DRI3 DMA-BUF, VPP and VCN (#80)
With --features inproc-av on X11 and UU_VIDEO_ENCODER=vaapi, VAAPI runs in process: a DRI3 DMA-BUF of the root
(XShm upload without DRI3) goes through VPP to NV12 and the hardware encoder. SPS/PPS(/VPS) and slice headers are
packed by the host because radeonsi (Mesa 26) does not write them. libva/libva-drm are dlopen'ed; release builds do
not enable inproc-av. The NVENC path is unchanged.

Accepted by the contributor on AMD HawkPoint1 (Mesa 26.2.3), 1920x1200@60, with the official Mac viewer
(HEVC, presets, fps, scaling). Intel iHD and 4K are not verified. Thanks @ferstar.
2026-10-21 15:25:13 -07:00
059a3b1bb8 inproc-av: 4:4:4 on the native NVENC engine (#76, #77)
H.264 High 4:4:4 / HEVC FRExt with chromaFormatIDC 3 and AQ off when 真彩 is requested; GPUs without YUV444 encode fail the capability check and fall back. full_chroma_available() no longer excludes the in-process path. UU_PROBE_CHROMA=444 for the probe.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 08:24:32 -07:00
76941459cc inproc-av: native in-process NVENC reading XShm directly (#74, #75)
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 07:26:45 -07:00
1fa346fd1f device_capability: list every supported format with its size, not 0x0 (#79)
The official viewer (libstreamer, Mac 4.43) treats a video_codec_capability entry
with width or height 0 as unsupported. The 4.37 Windows host we copied in #49 ran on
a GTX 660 without HEVC/4:4:4, so its 0x0 entries meant exactly that. Evidence by
@ferstar in #77.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: ferstar <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-21 21:29:23 +08:00
VallierDevandClaude Opus 5.5 b1da297e42 Wayland: only a missing virtual pointer falls back to uinput (#78)
uu_wl_move returns -2 only when the compositor has no wlr-virtual-pointer; other failures are returned as before. Document UU_WAYLAND_NO_VIRTUAL_KEYBOARD.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 21:05:11 +08:00
ossSBandClaude Opus 5.5 c739036301 Wayland: virtual pointer and keyboard are optional; capture still starts (#72, #73)
Compositors without wlr-virtual-pointer, or that restrict the virtual keyboard to their input method (Denial), now bring up capture and fall back to uinput for input. UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1 skips the virtual keyboard.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 16:29:19 +08:00
VallierDevandClaude Opus 5.5 5fdb98b0f5 QR login follows the official client: status_query_ticket, 60 s long poll, stop on failure (#68)
From the official Mac client (UURemote 4.42; QRCodeGenLoginResponse decodes only qrcode_jump_url
and status_query_ticket, the status/by_qrcode bodies carry that ticket under "token"):
- gen/login is sent without a body; the status ticket is status_query_ticket (older token as fallback).
- The status long poll re-asks right after each answer with a 60 s request timeout (was 12 s).
- Status 3 regenerates at once, status 0 after 0.35 s, 4 logs in (3 no longer calls by_qrcode).
- Errors such as HTTP 400 code 1190 and timeouts stop polling until the user clicks the new
  刷新二维码 button (Enter in a terminal; one minute when neither exists). This replaces the
  v0.2.19 backoff and the re-register hint.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:58:00 +08:00
VallierDevandClaude Opus 5.5 0afc602e66 Login polling backoff and a hint for instantly expiring QR codes (#68); bitrate unit safeguard; doctor wording
- Never spin on immediate unchanged status answers or transport errors (2 s backoff); repeated
  QR codes that expire within seconds back off exponentially and point to re-registering the
  device identity, which recovered a flagged device in #68.
- Custom bitrate field 8 is bit/s (#67); values that can only be Mbit/s or kbit/s are scaled
  instead of capping the encoder at 1 kbit/s.
- doctor: without DISPLAY the X11 engine still tries :0/:1, so the #66 warning says that.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:29:57 +08:00
ZoranandJuanZoran 762cfccc44 Custom video bitrate is bits per second (#67)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 16:28:56 +08:00
axlrose 9520b69730 doctor: say so when the session has no screen to capture (#66)
Without DISPLAY and without WAYLAND_DISPLAY the desktop backend cannot
capture anything: the host logs 'Desktop unavailable ... x11_init failed'.
The report named X11 as the selected backend and nothing else, which reads
like a working setup. Name the missing display and note that the terminal,
file transfer and port mapping tools still work.
2026-10-20 16:28:51 +08:00
VallierDevandClaude Opus 5.5 c1b8bfe1b3 show: report a skipped or crash-looping service instead of waiting 30 s (#62); document FFmpeg 6.x for inproc-av (#63)
systemctl start returns 0 when the unit is skipped by a Condition or keeps crashing under
Restart=; show now reads ActiveState/SubState/ConditionResult while waiting and names the real
problem. ffmpeg-sys-next's build script runs before ours, so FFmpeg >= 7 cannot be caught in
build.rs; the README and AGENTS state the 6.x requirement next to the build commands.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 15:24:33 +08:00
VallierDevandClaude Opus 5.5 5949314e55 Experimental WOL helper (UU_WOL_HELPER=1); doctor keeps logs quiet
Mirrors the official Windows host (GameViewerServer reportLanInfo / PushMessageHandler::wakeOnLan /
send_wol): report the LAN identity after sign-in and answer wake_on_lan pushes with a magic packet
to the target's subnet broadcast. Field names come from the official log strings; off by default
and unverified end to end. wake_on_lan push key names are always logged for evidence.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:43:13 +08:00
VallierDevandClaude Opus 5.5 554cbe806a doctor: one paste-safe diagnostic report for issues
Session, selected backend (and the X11-inside-Wayland trap), engine plugin load results, uinput
and render-node access, FFmpeg encoders/version, the default codec, sign-in and service state.
Prints booleans, names and versions only; home directory and user name are masked. The issue
template and READMEs ask for it.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:30:01 +08:00
VallierDevandClaude Opus 5.5 68ad9759bd KDE idle inhibition during remote sessions; lock and X11-in-Wayland hints (#61)
- KDE portal sessions hold an org.freedesktop.ScreenSaver inhibitor while a desktop connection
  is active (GNOME keeps SessionManager.Inhibit), so the idle timeout no longer locks mid-session.
- Log a hint when the desktop locks: viewers only see black frames until it is unlocked.
- Warn when the X11 backend is selected while a Wayland session is running (XWayland root
  capture is all black without any error).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:12:28 +08:00
Jeff Zhangandferstar 169edf2224 inproc: pad odd native captures to even for the in-process encoder (#60)
The in-process encoder opened its context at the raw capture size, so an
odd logical desktop (e.g. two stacked 150% monitors, 2560x2507) made every
H.264/HEVC/NVENC encoder fail to open. The encoder size is now rounded up to
even, and a native capture is copied into a zeroed frame of that size so the
extra row/column stays black. Scaled output paths are unchanged.

Co-authored-by: ferstar <[email protected]>
2026-10-20 07:23:54 +08:00
VallierDevandClaude Opus 5.5 6733a117a2 CPU hosts default to H.264; aarch64 release package (#59)
libx265 is about ten times slower than libx264 (15 vs 155 fps at 1080p on a 4-core Ampere A1),
so without NVENC/VAAPI the host now picks H.264 even when both sides offer H.265;
UU_VIDEO_CODEC=h265 still forces it. The release workflow builds x86_64 and aarch64 packages
(each with both engine plugins) and publishes them from a single job.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 01:28:38 +08:00
ZoranandJuanZoran d90b4bccde Hyprland: bind absolute pointer to the captured output; opt-in monitor switching (#57)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 00:33:31 +08:00
VallierDevandClaude Opus 5.5 65c04e796a One release package for every desktop: Wayland and portal engines as runtime plugins
The release tarball was X11 only, so Hyprland/niri and GNOME/KDE Wayland users had to build from
source (#43, #54). With --features engine-plugins the wayland and portal engines are built as
libuu-wayland.so / libuu-portal.so and dlopen'ed only when the session selects them, so X11 hosts
need none of their libraries. The wayland plugin is built on Ubuntu 22.04 with the main binary;
the portal plugin needs libei >= 1.1 and is built on 24.04 (glibc >= 2.39). Source builds without
engine-plugins keep linking the engines statically.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 22:10:11 +08:00
VallierDevandClaude Opus 5.5 3480318089 portal: say how to get a picture when the build lacks portal support (#43)
Release packages are X11 only; on GNOME/KDE Wayland auto selection picks the
portal backend, which then failed every 5 s with the opaque "portal
unavailable (code 2)".

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 19:44:13 +08:00
wen0531andwen0531 10166c66e0 video: pad odd captured frame dimensions to even (#53)
The portal backend reports the compositor's logical desktop size, which is
odd when a scaled monitor's logical extent is odd: two stacked monitors at
150% scale capture 2560x2507. H.264/HEVC 4:2:0 encoders (and NVENC's surface
allocation) reject odd dimensions, so with such a desktop every encoder
failed to open:

  [libx264] height not divisible by 2 (2560x2507)
  [h264_nvenc] InitializeEncoder failed: out of memory (10)
  ERROR Live desktop stream stopped: Encoder output ended

and the official viewer stayed on 正在传输画面 while input still worked.

Pad the odd row/column in the filter chain when the native capture size is
known and no output scaling was requested (a no-op case omitted for even
sizes). The host display mode, the reported capture size and the explicit
分辨率 scaling path are unchanged; the fixed-input probe keeps its chain.

Co-authored-by: wen0531 <[email protected]>
2026-10-19 14:57:02 +08:00
aresbit 6416f75b7f auth: bypass ambient proxies by default; UU_USE_PROXY=1 opts in (#52)
A local HTTP/SOCKS proxy that intercepts TLS caused login to fail with
"tls handshake eof". Build all cloud API clients with no_proxy() unless
UU_USE_PROXY is explicitly truthy, so direct connections are the default
and environments that genuinely need a proxy can still enable it.
2026-10-19 10:25:58 +08:00
70cb5ad57e Wayland/wlroots: type mobile IME text through the virtual keyboard's spare keycodes (#51)
The mobile clients' input method sends `text_input {content}` over CONTROL. Upstream only
implements it for X11, so a Wayland host (Hyprland here) dropped the characters with a
warning. Wire it up: characters the session keymap already produces are pressed as
ordinary keycodes, and characters it cannot produce are carried by spare keycodes (the
keymap has ~33 named but unmapped ones) declared for the duration of one batch, in text
order, then removed again.

The focused client translates keycodes with the keymap the compositor last handed it, and
a keymap uploaded to a keyboard the seat already has is never handed on again: measured on
Hyprland 0.56.2, pressing the remapped keycodes then reproduces the previous message's
text (a space came out as the previous message's first character, and every message
repeated the one before it). Re-attaching the virtual keyboard is what makes the
compositor send the keymap to the client, so each batch does that, waits for the
compositor to install the keymap, and releases held keys first because the new keyboard
starts with none. No timing sleep is needed once the keyboard is re-attached, so there is
none. Plain latin text and spaces never touch the keymap at all. The pristine keymap is
restored after every call, so uu_wl_key keeps its own symbol map and the compositor is
never left with spare keys bound.

`wayland-text-probe` reports how many characters one upload can carry and types a sample;
UU_PROBE_SEQUENCE types one message per |-separated field, the way the phone's input
method sends them, which is what reproduced this locally.

Co-authored-by: Hey Claw <[email protected]>
Co-authored-by: Claude Code <[email protected]>
2026-10-18 21:07:23 +08:00
VallierDevandClaude Opus 5.5 7fcc674440 Release v0.2.10: official device_capability shape and sender_para_info (#49)
The iPhone client ignored our flat forward_setting device_capability and kept
quality and chroma locked. Send it nested under data.device_capability with
type beside it, list the formats the encoder really produces (4:4:4 when
available), and add sender_para_info, as the official Windows host does.
Verified with the UU iPhone app 4.42.0.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 20:54:34 +08:00
ca49232674 HEVC: split access units by picture boundaries; no -aud for hevc_vaapi (#48)
* HEVC: split access units by picture boundaries, and stop passing -aud to hevc_vaapi

hevc_vaapi with `-aud 1` writes an AUD only at IRAPs and drops every other picture from
the bitstream: a 90-frame 640x360 clip came out as 3 IDRs and no P-frames. The reader
splits access units on AUDs, so each "frame" became one IDR plus a whole GOP, and the
IRAP gate then rejected all of them - the H.265 path sent no video at all (measured
~12 kbit/s outbound against 4-6 Mbit/s for H.264).

HEVC now leaves AUD off and hevc_au_offsets() splits on RFC 7798 picture boundaries (an
AUD, or the first NAL after a VCL NAL that is non-VCL or starts a picture), which also
keeps multi-slice pictures in one unit and covers the libx265/NVENC shapes. Parameter
sets still repeat in-band ahead of every IDR, so no out-of-band sprop is needed.

The fixed-input probe hardcoded H.264 in three places (settings, output muxer, first-unit
check), which is why this path was never measurable; it now follows UU_VIDEO_CODEC.

Verified with desktop-video-probe (90-frame fixed input): hevc_vaapi and libx265 both
emit 90 frames, first unit an IRAP with its parameter sets.

Assisted-by: DeepSeek V4.1 Flash-1017

* HEVC: keep suffix SEI, filler and end markers with the preceding picture

RFC 7798 / H.265 7.4.2.4.4 lets only AUD, VPS/SPS/PPS, prefix SEI and types
41-44/48-55 open an access unit; trailing NALs stay with the picture. Verified on
an RTX 3090 with the fixed-input probe: hevc_nvenc and libx265 both yield 90/90
decodable units with an IRAP first.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-18 16:32:35 +08:00
NuoFang cb8253febf VAAPI: opt-in UU_VAAPI_BUFFER_MS for the VBV buffer (#47)
The 100-500 kbit default keeps NVENC keyframes inside the buffer, but VAAPI quantizes a
whole desktop keyframe when the buffer is that small: on a 2560x1440 H.264 VAAPI stream
capped at 30 Mbit/s the first IDR measured 59,910 bytes and the picture blurred once per
GOP before sharpening back.

UU_VAAPI_BUFFER_MS (10-1000 ms, VAAPI only) sizes the buffer as bitrate x ms/1000. With
250 ms on the same input the first IDR measured 142,397 bytes and the worst-frame Y-SSIM
over 180 static frames went from 0.9492 to 0.9933, with no rise in average bitrate.

Opt-in: unset, out of range or unparsable keeps the old buffer.

Assisted-by: DeepSeek V4.1 Flash-1017
2026-10-18 15:31:00 +08:00
VallierDevandClaude Opus 5.5 63ebb3e78a Release v0.2.7: mobile text_input (#13, #46); platform-aware viewer clipboard
Host: accept the official text_input {content} action on any channel and type it on
X11 via spare-keycode Unicode keysyms (verified with xev); log non-CONTROL JSON
action names. Viewer: Windows-type hosts get only the case-10 text change (a rich
format list overwrote it and was never rendered), Mac gets only the rich offer.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 09:41:56 +08:00
VallierDevandClaude Opus 5.5 8fb57b421d Release v0.2.6: input diagnostics (#46), Mac terminal fix
Log unsupported CONTROL input actions (names only) and the server NumLock
state for numpad keys; skip the SDL window test on macOS (main-thread SDL).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 07:26:26 +08:00
VallierDevandClaude Opus 5.5 9622bf4c1e fix(viewer): accept terminal RPC answers on the terminal channel
The official Mac host answers check_env on the BINARY terminal channel next
to TERM frames; the viewer parsed it as a TERM frame and closed. Verified
live: Mac host terminal opens and echoes input.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 23:30:13 +08:00
VallierDevandClaude Opus 5.5 94ff1f1c02 fix(viewer): exchange text clipboard with the official Mac host
The Mac host offers pasteboard text as format 0 "public.utf8-plain-text"
(UTF-8), not CF_UNICODETEXT, so the viewer never requested it. Accept and
request that format, and offer it next to CF_UNICODETEXT from the viewer.
Host-side offers to official clients are unchanged. Mac -> viewer verified
live; viewer -> Mac not yet. Adds format-name/echo diagnostics (no data).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 23:14:13 +08:00
VallierDevandClaude Opus 5.5 cd6df7f03f fix(viewer): pick -fps_mode or -vsync by probing ffmpeg; Release v0.2.4
FFmpeg 9 removed -vsync, so v0.2.2/v0.2.3 decoders exited at start and every
frame failed. Verified against the official Mac host on FFmpeg 9.0.2.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 22:38:33 +08:00
VallierDevandClaude Opus 5.5 2815a01569 feat(viewer): remove a device from the account (unbind)
POST /api/v1/device/{id}/unbind, the path the official Windows host and Mac
viewer use for 「删除设备」. Verified live on a disposable test device; the
shared-device path (/api/v1/device/share/{id}/unbind) comes from strings only.
CLI: uuremote-viewer unbind DEVICE [--shared]; launcher: 更多工具 → 删除设备
with a confirmation dialog.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 22:26:14 +08:00
wanglz111 8967dfdd4b fix(viewer): reuse the SDL window for clipboard to stop GNOME Dock churn (#41)
* Fix viewer Dock churn by reusing SDL clipboard window

* Handle clipboard text boundaries and read only after changes

* Keep SDL clipboard scoped to the focused desktop and validate CI call sites
2026-10-17 20:24:07 +08:00
wanglz111 3d4d8d1d64 fix(viewer): use native keycodes for Mac targets; ffmpeg 4.4 compatible decoding (#40)
* fix(viewer): send native keycodes to Mac targets

* fix(viewer): reject unknown keyboard target platforms

* fix(viewer): support FFmpeg 4.4 passthrough decoding
2026-10-17 18:58:57 +08:00
VallierDevandClaude Opus 5.5 73c1d9b54d viewer: also send ClipboardTextChangeRequest for official Windows hosts
The official Windows host only acknowledges the rich format-list offer
and never asks for the data. Each local change now also sends RpcRequest
case 10 ClipboardTextChangeRequest with the text (its
handle_text_change_request -> notifyReceiveText path); the host answers
case 6 err=1 (CB_SUCCEEDED), logged as a status only. This project's
host ignores case 10 and keeps using the rich offer. Note: on the tested
Windows host the acknowledged text still did not reach the desktop
clipboard; under investigation.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 18:56:26 +08:00
VallierDevandClaude Opus 5.5 432593083e viewer: terminal on the official Windows host
Live against an official Windows host (PowerShell via ConPTY):
- Its rpc_main.proto has no check_env (requests end at 25), so a missing
  answer within 3 s no longer aborts; a negative answer still does.
- OPEN carries "option":"none"; the host rejects an OPEN without it
  ("terminal open: missing 'option' field", kError 1004). This
  project's host ignores the key.
- The host answers OPEN with {code,message}, header session 0, and keeps
  one terminal per connection as session 0; a nonzero header still
  overrides the body for this project's host.
- Echo requests whose SimpleAction omits the default action 0 are
  answered too.
Create/reattach on this project's host unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-17 18:36:45 +08:00