Compare commits

..
4 Commits
Author SHA1 Message Date
VallierDevandClaude Opus 5.5 c041160d6d Release v0.2.29
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 21:52:30 +08:00
VallierDevandClaude Opus 5.5 69aecf0269 X11: select one monitor with UU_X11_MULTISCREEN=1 (#100)
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 06:51:42 -07:00
VallierDevandClaude Opus 5.5 979b62d271 Issue template: keep peer and port-mapping log lines, drop webrtc noise, mask IPv6/MAC
The WARN filter let webrtc_ice/dtls lines push the useful ones out of the
last 80 lines (#99). Also mask IPv6 and MAC addresses, and ask for the
graphical session terminal: doctor from SSH/tty reports no DISPLAY.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 21:20:42 +08:00
Jeff Zhangandferstar 6a3da14961 Switch the desktop encoder on SIGUSR2 without dropping the session (#96)
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.

Co-authored-by: ferstar <[email protected]>
2026-10-23 03:24:29 -07:00
15 changed files with 627 additions and 53 deletions

No files matched your search

+5 -4
View File
@@ -32,8 +32,8 @@ body:
attributes:
label: 诊断信息 / Diagnostics
description: |
先复现一次问题,然后在被控的 Linux 上运行下面的命令,把输出粘贴到这里(IP 会被自动抹掉,不包含密码、令牌或剪贴板内容)。
Reproduce the problem, then run this on the Linux host and paste the output (IPs are masked; no passwords, tokens or clipboard data).
先复现一次问题,然后在被控 Linux 的**图形桌面里打开的终端**中运行下面的命令(SSH 或 tty 里缺少桌面环境变量,doctor 结果不准),把输出粘贴到这里(IPv4/IPv6/MAC 地址会被自动抹掉,不包含密码、令牌或剪贴板内容)。
Reproduce the problem, then run this in a terminal **inside the Linux graphical session** (SSH/tty lacks the desktop environment, so doctor would be misleading) and paste the output (IPv4/IPv6/MAC addresses are masked; no passwords, tokens or clipboard data).
```sh
{
@@ -45,8 +45,9 @@ body:
echo "== 显卡"; lspci 2>/dev/null | grep -iE 'vga|3d'
echo "== FFmpeg"; ffmpeg -hide_banner -encoders 2>/dev/null | grep -E 'h264_nvenc|libx264'
echo "== 日志"; journalctl --user -u uuremote-native.service --since "-30min" --no-pager -o cat \
| grep -E 'Starting|backend|Selected capture|Desktop encoder|Capture setting request|Desktop video settings|Offer for connection|WARN|ERROR' | tail -n 80
} 2>&1 | sed -E 's/[0-9]{1,3}(\.[0-9]{1,3}){3}/x.x.x.x/g'
| grep -E 'Starting|backend|Selected capture|Desktop encoder|Capture setting request|Desktop video settings|Offer for connection|PeerConnection State|Remote controller disconnected|ICE path|Port mapping|WARN|ERROR' \
| grep -vE 'webrtc_ice|webrtc_dtls|webrtc::mux' | tail -n 120
} 2>&1 | sed -E 's/[0-9]{1,3}(\.[0-9]{1,3}){3}/x.x.x.x/g; s/([0-9a-fA-F]{1,4}:){4,7}[0-9a-fA-F]{1,4}|[0-9a-fA-F]{0,4}::[0-9a-fA-F:]*[0-9a-fA-F]/x:x::x/g'
```
render: text
validations:
+3 -2
View File
@@ -117,8 +117,9 @@ viewer does not reconnect them automatically.
| Item | Meaning |
|---|---|
| `~/.config/uuremote/config.json` | user_id, device_id, client_id, system_id, machine_guid, token, csrf; optional `sign_key`, `ffmpeg_root`. `$UU_CONFIG` overrides the path |
| `~/.config/uuremote/host_settings.json` | persisted 安全 settings: auto_lock, keep_mute, mute_permanent; optional `video_encoder` (`auto`/`cpu`/`vaapi`/`nvenc`) and `video_codec` (`auto`/`h264`/`h265`), written by `set-encoder` / `set-codec` (0600, merge write). Non-`auto` beats `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`. Applied on the next desktop stream |
| `~/.config/uuremote/host_settings.json` | persisted 安全 settings: auto_lock, keep_mute, mute_permanent; optional `video_encoder` (`auto`/`cpu`/`vaapi`/`nvenc`) and `video_codec` (`auto`/`h264`/`h265`), written by `set-encoder` / `set-codec` (0600, merge write). Non-`auto` beats `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`. `set-encoder` and `set-codec` both send `SIGUSR2` to the pid in `host.pid` (same binary). Live desktop streams restart the encoder (`EncoderTask::restart`, sequence kept, first frame IDR) without dropping the peer. Codec preference is logged and applies on the next desktop stream. `SIGUSR2` does not re-probe. Hand edits: `kill -USR2 $(cat ~/.config/uuremote/host.pid)` |
| `UU_DESKTOP_BACKEND` | `auto` (default) / `x11` / `wayland` / `portal` / `kms` (experimental feature) / `none` (headless: no display; desktop offers ignored; tool peers get a nominal 1920x1080 screen + Allow permissions, which the port-mapping viewer requires) |
| `UU_X11_MULTISCREEN=1`, `UU_X11_OUTPUT` | X11: advertise each RandR monitor (`xrandr --listmonitors`, read once at start; primary or `UU_X11_OUTPUT` is id 0) through the same screen-switch path as `UU_WAYLAND_MULTISCREEN` (`wayland::outputs`/`select`). x11grab reads `display+x,y` at the monitor size, XTest/uinput absolute input adds the monitor offset, the in-process engine and `desktop_mode` resize are skipped (分辨率 scales). Needs two or more monitors |
| `UU_DESKTOP_RESIZE=0` | X11: the viewer's 分辨率 choice scales the encoded stream instead of changing the display mode. Default: `src/desktop_mode.rs` switches the primary output via xrandr (adds a CVT-RB mode when missing, re-applies once if mutter resets it), restores the original mode for resolution_type 3 and 2 s after the last desktop stream ends |
| `UU_NVENC_RGB=0` / `=1` | NVENC 4:2:0 without scaling takes packed BGRA/BGR0 directly (no CPU swscale). Default: on, except when a connected DRM connector belongs to an nvidia-bound card (desktop composited on the encoding GPU; #16 measured 82.6 vs 98 fps at 4K). `0` forces CPU conversion, `1` forces the direct path |
| `UU_INPUT_BACKEND` | `auto` (uinput on Wayland/portal when `/dev/uinput` is accessible, udev `uaccess` rule in README) / `uinput` / `native`. X11 keeps XTest (held-key autorepeat handling) |
@@ -168,7 +169,7 @@ for a new QR login.
| `src/viewer_main.rs`, `src/viewer/` | experimental viewer (`--features native-viewer,viewer-sdl`): cloud join, WebRTC offer side, SDL desktop window (ffmpeg CLI decode), files/terminal/portmap/power/assist tools, device removal (`POST /api/v1/device/{id}/unbind`, verified live; shared devices use `/api/v1/device/share/{id}/unbind`, strings only), GTK launcher |
| `c_engine/viewer_window.c`, `c_engine/viewer_tools.c` | viewer GTK launcher and tool windows (files, port mapping, terminal list) |
Diagnostic subcommands: `doctor` (paste-safe report: session, selected backend, engine plugins, uinput, encoder and codec with source, sign-in/service state; booleans and names only), `set-encoder auto|cpu|vaapi|nvenc`, `set-codec auto|h264|h265` (next desktop stream; illegal values exit 2), `login [--no-gui]`, `unlock-check` (password on stdin, prints only accepted/rejected),
Diagnostic subcommands: `doctor` (paste-safe report: session, selected backend, engine plugins, uinput, encoder and codec with source, sign-in/service state; booleans and names only), `set-encoder auto|cpu|vaapi|nvenc` and `set-codec auto|h264|h265` (both notify a running host with SIGUSR2; live encoder switch, negotiated codec unchanged, codec preference on the next desktop stream; illegal values exit 2), `login [--no-gui]`, `unlock-check` (password on stdin, prints only accepted/rejected),
`desktop-probe [new.png]`, `desktop-video-probe` (`UU_PROBE_FPS`, `UU_PROBE_FRAMES`, `UU_PROBE_QUALITY` 1-5 = viewer bitrate preset, 5 auto; `UU_PROBE_CHROMA=444` 真彩; `UU_PROBE_INPUT` fixed video/image sequence, `UU_PROBE_LOOP=1` repeats), `wayland-input-probe`, `clipboard-acceptance`,
`portal-acceptance`, `help`. Unknown arguments exit with code 2. Builds up to v0.1.0 did **not** reject them and
started a second full host server instead, so check that a subcommand exists in the binary you run.
Generated
+1 -1
View File
@@ -2741,7 +2741,7 @@ checksum = "06abde3611657adf66d383f00b093d7faecc7fa57071cce2578660c9f1010821"
[[package]]
name = "uu-remote-linux"
version = "0.2.28"
version = "0.2.29"
dependencies = [
"async-trait",
"base64 0.22.1",
+1 -1
View File
@@ -1,6 +1,6 @@
[package]
name = "uu-remote-linux"
version = "0.2.28"
version = "0.2.29"
edition = "2021"
default-run = "uuremote-server"
authors = ["uu-remote-linux contributors"]
+13 -3
View File
@@ -104,19 +104,21 @@ failure falls back to SHM. The virgl VM verified fallback only: successful impor
mapping and hardware acceleration remain unverified. This is not zero-copy VAAPI;
`UU_VIDEO_ENCODER=vaapi` still uploads CPU frames through FFmpeg.
### Hyprland monitor switching (experimental)
### Monitor switching (experimental)
Native Wayland absolute pointer motion now targets the captured output by default, fixing multi-monitor click offsets. uinput may still handle keyboard, buttons and relative motion.
Set `UU_WAYLAND_MULTISCREEN=1` to select physical monitors from the phone client. `UU_WAYLAND_OUTPUT` chooses the initial output. Capture and absolute pointer targeting switch together across different resolutions, scales and desktop positions.
X11 sessions send all monitors as one combined picture by default. With `UU_X11_MULTISCREEN=1` the host lists the monitors from `xrandr --listmonitors`; the viewer selects one, only that region is captured, and absolute pointer positions are offset to that monitor. The primary monitor is the default; `UU_X11_OUTPUT` picks another (e.g. `HDMI-1`). The layout is read when the host starts; restart the service after changing it. In this mode the viewer's resolution setting scales the stream instead of changing the display mode. Experimental: unit tests and Xvfb virtual monitors only, not yet accepted with the official clients.
Switching reuses one video track and pauses input until the new source sends a frame. Capture/encoder failure or a first-frame timeout requests restoration of the previous source. The inventory uses `hyprctl` and supports unrotated outputs; restart the host after monitor hotplug or layout changes. Phone-side switching and clicks were tested on Omarchy / Hyprland with 2560×1440 at 125% and 1920×1080 at 133.33%.
## Not implemented / not supported
| Feature | Status |
|---|---|
| Switching between multiple monitors | Experimental on native Hyprland Wayland; see above |
| Switching between multiple monitors | Experimental on native Hyprland Wayland and on X11 (`UU_X11_MULTISCREEN=1`); see above |
| True color (4:4:4) | Supported (v0.1.15): the default FFmpeg pipeline with NVENC / libx264 encodes H.264 High 4:4:4; `inproc-av` native NVENC encodes H.264 High 4:4:4 / HEVC FRExt; VAAPI stays 4:2:0 and reports that to the client |
| HDR | Not implemented |
| Super screen / virtual display | Not implemented |
@@ -339,6 +341,8 @@ Common environment variables:
| `UU_NVENC_RGB=0` / `=1` | NVENC encodes BGRA directly (saves CPU). Off by default when a monitor is connected to the NVIDIA card (slower when the desktop is composited on the same GPU); `0` forces off, `1` forces on |
| `UU_WAYLAND_MULTISCREEN=1` | Enable Hyprland physical monitor switching (off by default) |
| `UU_WAYLAND_OUTPUT` | Initial native Wayland output name, e.g. `HDMI-A-1` |
| `UU_X11_MULTISCREEN=1` | Select and capture X11 monitors separately (experimental, off by default, needs `xrandr`) |
| `UU_X11_OUTPUT` | Initial X11 monitor name (`xrandr --listmonitors`); default: the primary |
| `UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1` | Native Wayland skips the virtual keyboard (e.g. Denial reserves it for its input method); keys go through uinput. Without wlr-virtual-pointer the pointer also uses uinput (#72) |
| `UU_INPUT_BACKEND` | `auto` (default: uinput on Wayland when accessible) / `uinput` / `native` |
| `UU_TERMINAL_SHORTCUTS=0` | Disable the Ctrl+V paste rewrite in terminal windows |
@@ -365,7 +369,13 @@ stays cached until the process exits, except when NVIDIA presence (`/proc/driver
or `/dev/nvidia0`) no longer matches the report: the next desktop connection then starts one
background re-probe (`warm_auto_probe`) and still uses the cached encoder until the new result
is stored. An NVENC failure is kept for 10 minutes, and the next desktop connection after that
starts the same background re-probe while still using the cached encoder. They take effect the next time a desktop connection starts. Explicit `vaapi` with 真彩 stays on VAAPI,
starts the same background re-probe while still using the cached encoder. `set-encoder` and
`set-codec` both send `SIGUSR2` to the host in `host.pid` when that process is this program.
An encoder change switches each live desktop stream without disconnecting and keeps the codec
negotiated for that session. A failed start follows the existing fallback (in-process, then the
FFmpeg process, then CPU). After a hand edit, `kill -USR2 $(cat ~/.config/uuremote/host.pid)`
does the same. `SIGUSR2` does not re-probe. A codec change takes effect the next time a desktop
connection starts; the running host only logs it. Explicit `vaapi` with 真彩 stays on VAAPI,
encodes 4:2:0, and reports chroma 4:2:0 in CaptureSettingSync field 3. If the chosen encoder
cannot start, the stream falls back to CPU and logs a warning. VAAPI is not an auto candidate
until #33.
+7 -3
View File
@@ -90,19 +90,21 @@ GNOME Portal 的控制通道不再等待授权窗口或第一帧画面:先通
原生 Wayland 实验选项:`UU_WAYLAND_PIPELINE=0` 可关闭流水线做对照。`UU_WAYLAND_DMABUF=1` 显式尝试 dma-buf→GBM CPU 映射(默认关闭,需要运行时 libgbm;可用 `UU_WAYLAND_DMABUF_DEVICE` 指定 render node,默认 `/dev/dri/renderD128`)。仅支持显式线性修饰符、单平面 8-bit RGB,失败回退 SHM;virgl VM 中只验证了回退,成功导入/映射和硬件加速均未验证。这不是零拷贝 VAAPI 路径;选择 `UU_VIDEO_ENCODER=vaapi` 时仍由 FFmpeg 上传 CPU 帧。
首次连接时,桌面会弹窗请求「远程桌面 / 屏幕共享」授权,同意后会记住授权。
### Hyprland 多显示器切换(实验性)
### 多显示器切换(实验性)
原生 Wayland 的绝对鼠标定位默认绑定正在采集的输出,修复双屏桌面下的点击偏移。uinput 可继续用于键盘、按键和相对移动。
设置 `UU_WAYLAND_MULTISCREEN=1` 后,手机端可选择并切换物理显示器;`UU_WAYLAND_OUTPUT` 指定默认屏幕。画面与绝对鼠标定位同步切换,支持不同分辨率、缩放和桌面位置。
X11 会话默认把所有显示器拼成一张画面。设置 `UU_X11_MULTISCREEN=1` 后,主机按 `xrandr --listmonitors` 列出各个显示器,控制端可选择其中一块,只采集该区域,绝对鼠标坐标加上该屏幕在桌面中的偏移;默认屏幕为主显示器,`UU_X11_OUTPUT` 可指定其他屏幕(如 `HDMI-1`)。显示器布局在主机启动时读取,改动后需重启服务。此模式下控制端的「分辨率」改为缩放画面,不再修改显示模式。实验性:目前只有单元测试与 Xvfb 虚拟显示器实测,尚未经官方客户端实机验收。
切屏复用同一条视频轨道,过渡期间暂停输入,发送新屏首帧后恢复;采集或编码失败、等待首帧超时会请求恢复原屏。当前通过 `hyprctl` 枚举未旋转的显示器,显示器插拔或布局变化后需重启服务。已在 Omarchy / Hyprland 上用官方手机客户端实测 2560×1440(125%)与 1920×1080(133.33%)双屏切换及点击。
## 尚未实现 / 不支持
| 功能 | 状态 |
|---|---|
| 多显示器切换 | Hyprland 原生 Wayland 后端实验性支持,见上文 |
| 多显示器切换 | Hyprland 原生 Wayland 后端与 X11(`UU_X11_MULTISCREEN=1`)实验性支持,见上文 |
| 真彩(4:4:4) | 支持(v0.1.15):NVENC / libx264 的默认 FFmpeg 管线输出 H.264 High 4:4:4;`inproc-av` 原生 NVENC 输出 H.264 High 4:4:4 / HEVC FRExt;VAAPI 管线仍为 4:2:0,并如实回报给客户端 |
| HDR | 未实现 |
| 超级屏 / 虚拟显示器 | 未实现 |
@@ -307,6 +309,8 @@ systemctl --user restart uuremote-native.service
| `UU_NVENC_RGB=0` / `=1` | NVENC 直接编码 BGRA(省 CPU)。显示器接在 NVIDIA 卡上时默认关闭(同卡合成时直吃反而更慢),`0` 强制关,`1` 强制开 |
| `UU_WAYLAND_MULTISCREEN=1` | 启用 Hyprland 物理显示器切换(默认关闭) |
| `UU_WAYLAND_OUTPUT` | 原生 Wayland 默认采集输出名称,例如 `HDMI-A-1` |
| `UU_X11_MULTISCREEN=1` | X11 下按显示器分别选择和采集(实验性,默认关闭,需要 `xrandr`) |
| `UU_X11_OUTPUT` | X11 默认采集的显示器名称(`xrandr --listmonitors`),默认主显示器 |
| `UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1` | 原生 Wayland 不创建虚拟键盘(如 Denial 只把它给自己的输入法),键盘改走 uinput。合成器没有 wlr-virtual-pointer 时鼠标也自动改走 uinput(#72) |
| `UU_INPUT_BACKEND` | `auto`(默认,Wayland 下可用时用 uinput)/ `uinput` / `native` |
| `UU_TERMINAL_SHORTCUTS=0` | 关闭终端窗口里的 Ctrl+V 粘贴转换 |
@@ -321,7 +325,7 @@ systemctl --user restart uuremote-native.service
| `UU_WOL_HELPER=1` | 实验性:让这台主机像官方 Windows 被控端一样充当「远程开机」辅助设备——登录后向网易上报本机局域网信息,收到云端唤醒请求时向同一局域网发送唤醒包(未经端到端验证) |
| `UU_USE_PROXY=1` | 使用环境变量里的 HTTP/SOCKS 代理;默认忽略代理、直连网易服务器 |
「远程结束后自动锁屏」「静音运行」等设置保存在 `~/.config/uuremote/host_settings.json`。同一文件里的 `video_encoder`(`auto`/`cpu`/`vaapi`/`nvenc`)和 `video_codec`(`auto`/`h264`/`h265`)用 `uuremote-server set-encoder`、`uuremote-server set-codec` 写入(非法参数退出码 2)。非 `auto` 的值优先于 `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`;`auto` 或留空则落到环境变量,再落到 auto(有 NVIDIA 时 NVENC 优先,失败再 CPU;没有 NVIDIA 时就是 CPU,不探测;codec 仍是硬件优先 H.265、CPU 用 H.264)。探测在启动时后台进行,不挡住第一路出图。成功结果缓存到进程退出,但 NVIDIA 是否存在(`/proc/driver/nvidia/version` 或 `/dev/nvidia0`)与报告不一致时,下一次桌面连接会在后台再探测一次(`warm_auto_probe`),这一路仍用缓存的编码器,直到新结果写入。NVENC 失败只缓存 10 分钟,到期后的桌面连接同样在后台再探测一次,这一路仍用当前结果。下次建立桌面连接时生效。显式 `vaapi` 请求真彩时仍用 VAAPI、编码 4:2:0,并在 CaptureSettingSync 的 field 3 回报 4:2:0。所选编码器在本机不可用时,建流回退 CPU 并记 warning。VAAPI 进入 auto 要等 #33。
「远程结束后自动锁屏」「静音运行」等设置保存在 `~/.config/uuremote/host_settings.json`。同一文件里的 `video_encoder`(`auto`/`cpu`/`vaapi`/`nvenc`)和 `video_codec`(`auto`/`h264`/`h265`)用 `uuremote-server set-encoder`、`uuremote-server set-codec` 写入(非法参数退出码 2)。非 `auto` 的值优先于 `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`;`auto` 或留空则落到环境变量,再落到 auto(有 NVIDIA 时 NVENC 优先,失败再 CPU;没有 NVIDIA 时就是 CPU,不探测;codec 仍是硬件优先 H.265、CPU 用 H.264)。探测在启动时后台进行,不挡住第一路出图。成功结果缓存到进程退出,但 NVIDIA 是否存在(`/proc/driver/nvidia/version` 或 `/dev/nvidia0`)与报告不一致时,下一次桌面连接会在后台再探测一次(`warm_auto_probe`),这一路仍用缓存的编码器,直到新结果写入。NVENC 失败只缓存 10 分钟,到期后的桌面连接同样在后台再探测一次,这一路仍用当前结果。`set-encoder` 和 `set-codec` 写完后若 `host.pid` 指向正在运行的本程序,都会发 `SIGUSR2`:编码器变化时进行中的桌面流立刻换编码器(不断开,沿用本会话已协商的 codec;新编码器起不来时按进程内 → FFmpeg 进程 → CPU 回退)。手改文件后可 `kill -USR2 $(cat ~/.config/uuremote/host.pid)`。`SIGUSR2` 不重新探测。codec 偏好仍在下次建立桌面连接时生效(运行中的 host 只记日志,不重开编码)。显式 `vaapi` 请求真彩时仍用 VAAPI、编码 4:2:0,并在 CaptureSettingSync 的 field 3 回报 4:2:0。所选编码器在本机不可用时,建流回退 CPU 并记 warning。VAAPI 进入 auto 要等 #33。
自定义码率按客户端选择的 Mbps 生效,例如 1 Mbps 对应 1000 kbit/s 的编码上限。
+22
View File
@@ -0,0 +1,22 @@
运行中切换编码器不再断开连接;X11 双屏/多屏可以只看其中一块屏幕(实验性)。/ Switch the encoder without dropping the session; select one monitor on X11 (experimental).
### 新增 / Added
- **运行中切换编码器(#85 第③步,#96,感谢 @ferstar)**:`uuremote-server set-encoder auto|cpu|vaapi|nvenc` 和 `set-codec` 写入设置后会通知正在运行的宿主(`SIGUSR2`),
已连接的桌面在下一帧边界换用新编码器,不用断开重连;VAAPI 不支持真彩 4:4:4 时自动降为 4:2:0 并通知客户端。只通知完整路径相同的宿主程序,
避免误杀旧版本宿主;没有通知到宿主时会打印提示(下次连接或重启服务后生效)。编码格式(H.264/H.265)偏好仍在下次连接时生效。
- **X11 单屏选择(#98,实验性)**:设置 `UU_X11_MULTISCREEN=1` 后,主机按 `xrandr --listmonitors` 列出各显示器,控制端可选择其中一块,只采集该区域,
鼠标绝对坐标加上该屏幕的偏移;默认主显示器,`UU_X11_OUTPUT` 可指定其他屏幕。显示器布局在启动时读取,改动后需重启服务;此模式下「分辨率」改为缩放画面。默认关闭,单屏用户不受影响。
- `set-encoder` / `set-codec` now switch a live desktop stream's encoder via `SIGUSR2` (same binary only) without reconnecting.
`UU_X11_MULTISCREEN=1` lets the viewer pick one X11 monitor (RandR monitors; capture and absolute input follow the selected monitor).
### 其他 / Other
- Issue 模板的诊断命令:保留连接状态和端口映射日志、过滤 WebRTC 内部噪音,并抹掉 IPv6 和 MAC 地址。
### 验证范围 / Validation
运行中切换编码器:单元测试与 CI,官方客户端下的切换时序尚未实机验证。X11 单屏选择:单元测试;在 Debian 13 上用两块 RandR 虚拟显示器实测,
鼠标落点与按区域采集正确;官方客户端在真实双屏上的切换尚未实机验证,欢迎反馈。
### 下载 / Download
`uu-remote-linux_0.2.29_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.29-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.29`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+6
View File
@@ -56,6 +56,12 @@ pub fn x11_size() -> Option<(u32, u32)> {
}
/// The root size from the last refresh, without an X round trip (pointer mapping).
/// Display the X11 engine opened, once a capture has initialized it.
pub fn x11_display() -> Option<String> {
let name = unsafe { x11_display_name() };
if name.is_null() { None } else { Some(unsafe { std::ffi::CStr::from_ptr(name) }.to_string_lossy().into_owned()) }
}
pub fn x11_last_size() -> Option<(u32, u32)> {
let (mut w, mut h): (libc::c_int, libc::c_int) = (0, 0);
if unsafe { x11_get_dimensions(&mut w, &mut h) } != 0 || w <= 0 || h <= 0 { return None; }
+29 -1
View File
@@ -334,9 +334,12 @@ impl InputInjector {
let result=crate::wayland::move_pointer(x,y,false);
if result!=-2 { return result; }
}
// X11 multi-screen: the point is inside the selected monitor; XTest and uinput span the root.
let placement=if relative || self.backend!=crate::desktop_backend::DesktopBackend::X11 {None} else {crate::wayland::x11_placement()};
let (x,y)=placement.map_or((x,y),|(ox,oy)|(x+ox,y+oy));
if let Some(uinput)=&self.uinput {
if relative { return Self::uinput_result(uinput.move_relative(x,y)); }
let (w,h)=*self.screen.lock().unwrap();
let (w,h)=placement.and_then(|_|crate::capture::x11_last_size()).unwrap_or(*self.screen.lock().unwrap());
if w > 1 && h > 1 {
let scale = |v: i32, extent: u32| (i64::from(v) * i64::from(crate::uinput::ABS_MAX) / i64::from(extent - 1)) as i32;
return Self::uinput_result(uinput.move_absolute(scale(x,w),scale(y,h)));
@@ -700,3 +703,28 @@ mod output_pointer_tests {
}
}
}
#[cfg(all(test,target_os="linux"))]
mod x11_monitor_pointer_tests {
use super::*;
#[test]
#[ignore="requires an X11 display with two or more RandR monitors and UU_X11_MULTISCREEN=1; moves pointer only"]
fn absolute_pointer_lands_on_the_selected_x11_monitor() {
let _capture=crate::capture::ScreenCapture::new().unwrap();
let input=InputInjector::new();
assert_eq!(input.backend,crate::desktop_backend::DesktopBackend::X11);
let outputs=crate::wayland::outputs();assert!(crate::wayland::x11_multiscreen() && outputs.len()>=2,"needs two X11 monitors");
for (id,output) in outputs.iter().enumerate().chain(outputs.iter().enumerate().rev()) {
crate::wayland::select(id).unwrap();
for (x,y) in [(0.0,0.0),(0.5,0.5),(0.999,0.999),(0.1,0.9)] {
let size=(output.width,output.height);
let pixels=crate::input_mapping::normalized_pointer(x,y,size.0,size.1).unwrap();
input.mouse_absolute_normalized(x,y,size);input.flush_pointer();
let (mut ax,mut ay,mut mask)=(0,0,0);
assert_eq!(unsafe {x11_pointer_state(&mut ax,&mut ay,&mut mask)},0);
assert_eq!((ax,ay),(output.x+pixels.0,output.y+pixels.1),"monitor={} normalized=({x},{y})",output.name);
}
}
crate::wayland::select(0).unwrap();
}
}
+108 -6
View File
@@ -144,10 +144,46 @@ fn set_video_pref() -> Result<(), Box<dyn std::error::Error>> {
let selection = video_select::selection();
let codec = match selection.codec_pref { video_select::CodecPref::Auto => "auto", video_select::CodecPref::H264 => "h264", video_select::CodecPref::H265 => "h265" };
println!("encoder={:?} source={} codec_pref={codec} source={}", selection.encoder, video_select::encoder_source_label(selection.encoder_source), video_select::source_label(selection.codec_source));
println!("takes effect the next time a desktop connection starts");
// Both subcommands wake the host. Encoder changes restart live desktop streams; codec changes are logged only.
match notify_host(libc::SIGUSR2) {
Ok(()) => println!("notified the running host"),
Err(_) => println!(
"host not running, or the running host is not this binary: takes effect the next time a desktop connection starts, or after restarting the service"
),
}
if which == "set-codec" {
println!("takes effect the next time a desktop connection starts");
}
Ok(())
}
/// Signal the host recorded in host.pid only when `/proc/<pid>/exe` is exactly
/// `canonicalize(current_exe())`. A filename match is not enough: an older host
/// has no SIGUSR2 handler, and the default action terminates the process.
/// A replaced binary reads back as `… (deleted)` and does not match.
fn notify_host(signal: i32) -> Result<(), ()> {
let pid = std::fs::read_to_string(host_pid_path())
.ok()
.and_then(|s| s.trim().parse::<i32>().ok())
.filter(|p| *p > 1)
.ok_or(())?;
let exe = std::fs::read_link(format!("/proc/{pid}/exe")).map_err(|_| ())?;
let own = std::fs::canonicalize(std::env::current_exe().map_err(|_| ())?).map_err(|_| ())?;
if !same_host_binary(&exe, &own) {
return Err(());
}
if unsafe { libc::kill(pid, signal) } == 0 {
Ok(())
} else {
Err(())
}
}
/// `/proc/<pid>/exe` must equal the canonical path of this binary. A trailing ` (deleted)` does not match.
fn same_host_binary(proc_exe: &std::path::Path, own: &std::path::Path) -> bool {
proc_exe == own
}
/// Explicit command words for set-encoder / set-codec. Empty and whitespace are illegal.
pub(crate) fn cli_pref_ok(which: &str, value: &str) -> bool {
let value = value.trim();
@@ -196,13 +232,75 @@ mod cli_exit_tests {
assert_eq!(super::reject_cli(Some("set-encoder"), 3, super::cli_pref_ok("set-encoder", "")), Some(2));
assert_eq!(super::reject_cli(Some("set-codec"), 3, super::cli_pref_ok("set-codec", " ")), Some(2));
}
/// SIGUSR1 and SIGUSR2 are installed with no assist UI. `host.pid` is written only after both exist.
#[test]
fn signal_handlers_install_without_assist() {
let rt = tokio::runtime::Builder::new_current_thread().enable_all().build().unwrap();
rt.block_on(async {
let _guard = crate::config::test_env_lock().lock().unwrap();
let dir =
std::env::temp_dir().join(format!("uuremote-signal-test-{}", std::process::id()));
let _ = std::fs::remove_dir_all(&dir);
std::env::set_var("UU_CONFIG", dir.join("config.json"));
assert!(super::install_host_signals(None));
let pid = std::fs::read_to_string(super::host_pid_path()).unwrap();
assert_eq!(pid.trim(), std::process::id().to_string());
std::env::remove_var("UU_CONFIG");
let _ = std::fs::remove_dir_all(&dir);
});
}
#[test]
fn sigusr2_requires_the_same_canonical_binary() {
let own = std::path::Path::new("/home/user/.local/bin/uuremote-server");
assert!(super::same_host_binary(own, own));
assert!(!super::same_host_binary(
std::path::Path::new("/tmp/unpack/uuremote-server"),
own
));
assert!(!super::same_host_binary(
std::path::Path::new("/home/user/.local/bin/uuremote-server (deleted)"),
own
));
}
}
/// SIGUSR1 (`uuremote-server show`) opens the host window.
fn present_on_usr1(ui: std::sync::Arc<assist::LocalUi>) {
// Install the handler before publishing the pid: SIGUSR1's default action terminates the process.
let Ok(mut usr1) = tokio::signal::unix::signal(tokio::signal::unix::SignalKind::user_defined1()) else { return };
/// SIGUSR2 (set-encoder, set-codec, or `kill -USR2`) re-reads host_settings. Encoder changes switch live desktop streams; codec changes are logged for the next connection.
/// The default action of either signal terminates the process, so both handlers are installed before `host.pid` is written.
/// SIGUSR2 is independent of remote assistance: `UU_REMOTE_ASSIST=0` and a failed assist setup still switch live encoders.
/// SIGUSR1 is installed first as a no-op so `show` cannot terminate a host that has no assist window yet.
fn install_host_signals(ui: Option<std::sync::Arc<assist::LocalUi>>) -> bool {
static USR1: std::sync::Once = std::sync::Once::new();
static USR2: std::sync::Once = std::sync::Once::new();
let mut usr1_ok = true;
USR1.call_once(|| {
match tokio::signal::unix::signal(tokio::signal::unix::SignalKind::user_defined1()) {
Ok(mut usr1) => { tokio::spawn(async move { while usr1.recv().await.is_some() {} }); }
Err(_) => usr1_ok = false,
}
});
if !usr1_ok { return false; }
let mut usr2_ok = true;
USR2.call_once(|| {
match tokio::signal::unix::signal(tokio::signal::unix::SignalKind::user_defined2()) {
Ok(mut usr2) => { tokio::spawn(async move { while usr2.recv().await.is_some() { crate::video_select::publish_reload(); } }); }
Err(_) => usr2_ok = false,
}
});
if !usr2_ok { return false; }
// Assist attaches later and replaces the no-op with the window. A second registration replaces the first.
if let Some(ui) = ui {
if let Ok(mut usr1) = tokio::signal::unix::signal(tokio::signal::unix::SignalKind::user_defined1()) {
tokio::spawn(async move { while usr1.recv().await.is_some() { ui.present(); } });
}
}
write_host_pid();
tokio::spawn(async move { while usr1.recv().await.is_some() { ui.present(); } });
true
}
fn present_on_usr1(ui: std::sync::Arc<assist::LocalUi>) {
let _ = install_host_signals(Some(ui));
}
fn host_pid_path() -> std::path::PathBuf { config::path().with_file_name("host.pid") }
@@ -210,7 +308,9 @@ fn host_pid_path() -> std::path::PathBuf { config::path().with_file_name("host.p
fn write_host_pid() {
use std::os::unix::fs::OpenOptionsExt;
use std::io::Write;
if let Ok(mut f) = std::fs::OpenOptions::new().write(true).create(true).truncate(true).mode(0o600).open(host_pid_path()) {
let path = host_pid_path();
if let Some(dir) = path.parent() { let _ = std::fs::create_dir_all(dir); }
if let Ok(mut f) = std::fs::OpenOptions::new().write(true).create(true).truncate(true).mode(0o600).open(path) {
let _ = write!(f, "{}", std::process::id());
}
}
@@ -521,6 +621,8 @@ async fn main() -> Result<(), Box<dyn std::error::Error>> {
virtual_audio::init();
let _audio_cleanup=virtual_audio::Cleanup;
log::info!("Starting uu-remote-linux host v{}...", env!("CARGO_PKG_VERSION"));
// Before host.pid, and before assist: a missing or failed assist session must still handle SIGUSR2.
let _ = install_host_signals(None);
video::warm_auto_probe();
video::check_ffmpeg_usable();
+65 -11
View File
@@ -814,10 +814,12 @@ async fn read_encoder_with(
settings: VideoSettings, #[cfg_attr(not(feature = "inproc-av"), allow(unused_variables))] idr: Arc<AtomicBool>, budget: Arc<Semaphore>,
selection: crate::video_select::Selection,
)->Result<(),String>{
let selected_output=if display.starts_with("wayland:") {crate::wayland::source(settings.source_id)} else {None};
let selected_output=crate::wayland::capture_source(&display,portal.is_some(),settings.source_id);
let size=selected_output.map_or(size,|s|(s.width,s.height));
let kms=display.starts_with("kms:");
let wayland=kms || display.starts_with("wayland:");
// X11 multi-screen: x11grab reads only the selected monitor's region of the root.
let x11_region=selected_output.filter(|_|!wayland);
let (permits_tx,mut permits_rx)=mpsc::channel::<OwnedSemaphorePermit>(4);
let kms_capture=if kms {
let capture=tokio::task::spawn_blocking(crate::kms::Capture::open).await.map_err(|_|"KMS worker failed")??;
@@ -825,7 +827,7 @@ async fn read_encoder_with(
Some(Arc::new(capture))
} else { None };
#[cfg(feature = "inproc-av")]
if allow_inproc && native_inproc(&display, portal.is_some(), encoder) {
if allow_inproc && x11_region.is_none() && native_inproc(&display, portal.is_some(), encoder) {
let max_kbps = settings.max_kbps().unwrap_or(30_000) as i64;
let config = crate::inproc_encoder::Config {
display: display.clone(), input: size, output: settings.output, fps: u32::from(settings.fps),
@@ -859,8 +861,9 @@ async fn read_encoder_with(
"-framerate",&fps,"-i","pipe:0","-an"]);
} else {
// The viewer draws its local pointer; do not bake a second into video.
let input=x11_region.map_or_else(||display.clone(),|o|format!("{display}+{},{}",o.x,o.y));
command.args(["-f","x11grab","-draw_mouse","0","-framerate",&fps,
"-video_size",&size,"-i",&display,"-an"]);
"-video_size",&size,"-i",&input,"-an"]);
}
// 其他分辨率: scale the captured desktop (the host display mode is left untouched).
command.args(scale_options(&settings, encoder, Some(source_size)));
@@ -1140,9 +1143,16 @@ fn keep_stream_display_awake() {
if result.is_err() { log::warn!("Display wake failed; continuing desktop stream and retrying next interval"); }
}
pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_track::VideoTrack>, mut size: (u32, u32), display: String, portal:Option<Arc<crate::portal::PortalSession>>,
/// `sync_tx` receives a Message 25 payload when a live encoder switch changes the encoded chroma.
pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_track::VideoTrack>, size: (u32, u32), display: String, portal:Option<Arc<crate::portal::PortalSession>>,
settings: tokio::sync::watch::Receiver<VideoSettings>, applied: Arc<tokio::sync::watch::Sender<VideoSettings>>, idr: Arc<AtomicBool>,
selection: crate::video_select::Selection, sync_tx: Option<tokio::sync::mpsc::UnboundedSender<Vec<u8>>>) -> Result<(), String> {
stream_desktop_at(pc, track, size, display, portal, settings, applied, idr, selection, sync_tx, crate::video_select::reload_generation_value()).await
}
pub async fn stream_desktop_at(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_track::VideoTrack>, mut size: (u32, u32), display: String, portal:Option<Arc<crate::portal::PortalSession>>,
mut settings: tokio::sync::watch::Receiver<VideoSettings>, applied: Arc<tokio::sync::watch::Sender<VideoSettings>>, idr: Arc<AtomicBool>,
selection: crate::video_select::Selection) -> Result<(), String> {
selection: crate::video_select::Selection, sync_tx: Option<tokio::sync::mpsc::UnboundedSender<Vec<u8>>>, reload_at_session: u64) -> Result<(), String> {
let _desktop_mode = crate::desktop_mode::StreamGuard::new();
loop {
if transport_closed(&pc) { return Ok(()); }
@@ -1163,7 +1173,14 @@ pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_
applied.send_replace(current);
settings.borrow_and_update();
}
// Reader restarts reuse this snapshot, so set-encoder waits for the next desktop connection.
// SIGUSR2 re-reads host_settings and restarts this encoder when the effective encoder changes.
// The negotiated codec stays; a codec-only change is logged and applied on the next connection.
let mut live_selection = selection;
let mut seen_codec_pref = selection.codec_pref;
let mut reload = crate::video_select::subscribe_reload();
// Only a SIGUSR2 since the session snapshot. A probe that finishes during setup is not a reload
// (sessions started before the probe keep the legacy encoder for their lifetime).
let mut reload_pending = crate::video_select::reload_since_session(reload_at_session, *reload.borrow());
let open = {
let display = display.clone();
let portal = portal.clone();
@@ -1175,7 +1192,7 @@ pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_
read_encoder(size, display.clone(), portal.clone(), latest.clone(), settings, sequence.clone(), idr.clone(), budget.clone(), selection)
}
};
let mut reader = EncoderTask(tokio::spawn(open(size, selection, current)));
let mut reader = EncoderTask(tokio::spawn(open(size, live_selection, current)));
let mut previous = None;
let mut timeline = RtpTimeline { fps: u64::from(current.fps), ..Default::default() };
let mut settings_open = true;
@@ -1190,6 +1207,43 @@ pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_
let (mut window_frames, mut window_skipped) = (0u64, 0u64);
let mut send_interrupted=false;
'stream: loop {
if reload.has_changed().unwrap_or(false) || reload_pending {
reload_pending = false;
// Mark the watch seen. An unconsumed has_changed stays true and restarts every frame.
let _ = reload.borrow_and_update();
let fresh = crate::video_select::selection();
let plan = crate::video_select::plan_switch(live_selection.encoder, seen_codec_pref, &fresh, current.chroma);
if let Some(plan) = plan.filter(|plan| plan.encoder.is_some()) {
let encoder = plan.encoder.unwrap();
let chroma = if plan.chroma_downgraded { "420" } else if current.chroma == crate::capture_setting::CHROMA_444 { "444" } else { "420" };
log::info!("Encoder switch: {} -> {} reason={} chroma={chroma}",
format!("{:?}", live_selection.encoder).to_ascii_lowercase(),
format!("{encoder:?}").to_ascii_lowercase(),
crate::video_select::encoder_source_label(fresh.encoder_source));
live_selection.encoder = encoder;
live_selection.encoder_source = fresh.encoder_source;
seen_codec_pref = fresh.codec_pref;
if plan.chroma_downgraded {
applied.send_modify(|value| value.chroma = plan.chroma);
current.chroma = plan.chroma;
settings.borrow_and_update();
if let Some(sync) = sync_tx.as_ref() {
// Wayland: x11_resized is None, and the connection size can be a previous output.
let native = x11_resized(&display, portal_stream, size).unwrap_or_else(|| crate::wayland::sync_native(&display, current.source_id, size));
let payload = crate::capture_setting::sync_payload(&current, native);
let _ = sync.send(payload);
}
}
// In-process engines honor this on the first frame; the process pipeline starts on an IDR.
idr.store(true, std::sync::atomic::Ordering::Relaxed);
reader.restart(open(size, live_selection, current)).await;
} else if plan.is_some() {
log::info!("Codec preference changed; takes effect the next time a desktop connection starts");
seen_codec_pref = fresh.codec_pref;
live_selection.codec_pref = fresh.codec_pref;
live_selection.codec_source = fresh.codec_source;
}
}
let next = *settings.borrow_and_update();
if next != current || send_interrupted {
let discard = next.codec != current.codec || next.source_generation != current.source_generation || next.source_id != current.source_id || send_interrupted;
@@ -1201,9 +1255,9 @@ pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_
reader.0.abort();
let _ = (&mut reader.0).await;
while receiver.try_recv().is_ok() {}
reader.0 = tokio::spawn(open(size, selection, next));
reader.0 = tokio::spawn(open(size, live_selection, next));
} else {
reader.restart(open(size, selection, next)).await;
reader.restart(open(size, live_selection, next)).await;
}
send_interrupted=false;
}
@@ -1214,7 +1268,7 @@ pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_
log::info!("Desktop geometry changed during the stream ({}x{} -> {}x{}); restarting capture", size.0, size.1, resized.0, resized.1);
size = resized;
while receiver.try_recv().is_ok() {}
reader.0 = tokio::spawn(open(size, selection, current));
reader.0 = tokio::spawn(open(size, live_selection, current));
continue;
}
if let (Err(error), VideoCodec::H265, true) = (&result, current.codec, track.supports(VideoCodec::H264)) {
@@ -1222,7 +1276,7 @@ pub async fn stream_desktop(pc: Arc<RTCPeerConnection>, track: Arc<crate::video_
applied.send_modify(|value| value.codec = VideoCodec::H264);
current = *settings.borrow_and_update();
while receiver.try_recv().is_ok() {}
reader.0 = tokio::spawn(open(size, selection, current));
reader.0 = tokio::spawn(open(size, live_selection, current));
continue;
}
if result.is_err() && !crate::wayland::outputs().is_empty() && !crate::wayland::input_ready() {
+164
View File
@@ -234,11 +234,103 @@ pub fn cached_probe() -> Option<ProbeReport> {
#[cfg(test)]
pub(crate) static PROBE_TEST_LOCK: std::sync::Mutex<()> = std::sync::Mutex::new(());
/// Tests that read or bump the process-global reload generation share this lock.
#[cfg(test)]
pub(crate) static RELOAD_TEST_LOCK:std::sync::Mutex<()> = std::sync::Mutex::new(());
#[cfg(test)]
pub fn clear_probe() {
if let Ok(mut slot) = cache().lock() { *slot = None; }
}
/// Why a live desktop encoder was asked to change.
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum SwitchReason {
/// Effective encoder differs. The log line uses `Selection::encoder_source`, not this variant.
Encoder,
/// Codec preference changed. The negotiated codec stays until the next stream.
CodecDeferred,
}
/// What SIGUSR2 should do to one live desktop stream.
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub struct SwitchPlan {
/// Restart the encoder. None keeps the running encoder (codec-only or no change).
pub encoder: Option<Encoder>,
pub reason: SwitchReason,
/// Chroma the restarted encoder can actually produce. VAAPI has no 4:4:4.
pub chroma: u64,
/// True when the request was 4:4:4 and the new encoder must report 4:2:0.
pub chroma_downgraded: bool,
}
/// Compare the selection this stream is using with a freshly read one.
/// Codec preference is the stored preference, not the negotiated m-line codec.
pub fn plan_switch(active_encoder: Encoder, previous_codec: CodecPref, next: &Selection, active_chroma: u64) -> Option<SwitchPlan> {
if next.encoder != active_encoder {
let chroma = if active_chroma == crate::capture_setting::CHROMA_444 && !crate::video::full_chroma_for(next.encoder) {
crate::capture_setting::CHROMA_420
} else {
active_chroma
};
return Some(SwitchPlan {
encoder: Some(next.encoder),
reason: SwitchReason::Encoder,
chroma,
chroma_downgraded: chroma != active_chroma,
});
}
if next.codec_pref != previous_codec {
return Some(SwitchPlan {
encoder: None,
reason: SwitchReason::CodecDeferred,
chroma: active_chroma,
chroma_downgraded: false,
});
}
None
}
/// Monotonic generation bumped by SIGUSR2. Streams watch it and re-read `selection()`.
fn reload_generation() -> &'static std::sync::atomic::AtomicU64 {
static GEN: std::sync::atomic::AtomicU64 = std::sync::atomic::AtomicU64::new(0);
&GEN
}
pub fn reload_generation_value() -> u64 {
reload_generation().load(std::sync::atomic::Ordering::Relaxed)
}
/// SIGUSR2: ask live desktop streams to re-read host_settings. Does not clear the probe cache.
pub fn notify_reload() {
reload_generation().fetch_add(1, std::sync::atomic::Ordering::Relaxed);
}
pub fn reload_watch() -> &'static tokio::sync::watch::Sender<u64> {
static WATCH: std::sync::OnceLock<tokio::sync::watch::Sender<u64>> = std::sync::OnceLock::new();
WATCH.get_or_init(|| {
let (tx, _) = tokio::sync::watch::channel(reload_generation_value());
tx
})
}
pub fn subscribe_reload() -> tokio::sync::watch::Receiver<u64> {
reload_watch().subscribe()
}
/// True when SIGUSR2 has bumped the generation since the session snapshot.
/// A background auto probe that finishes during setup does not bump it.
pub fn reload_since_session(at_session: u64, current: u64) -> bool {
current != at_session
}
/// Publish the generation so every subscribed desktop stream wakes.
pub fn publish_reload() {
notify_reload();
// send() drops the value when nobody is subscribed (the gap between desktop connections).
reload_watch().send_replace(reload_generation_value());
}
/// Setting (non-auto) beats the environment, which beats the NVIDIA/CPU default.
pub fn selection() -> Selection {
selection_with(cached_probe().as_ref())
@@ -486,6 +578,78 @@ mod tests {
assert_eq!(resolve_pair(None, None, None, Some("h264"), false, Some(&va)).codec_pref, CodecPref::H264);
}
fn selection_of(encoder: Encoder, codec: CodecPref) -> Selection {
Selection { encoder, encoder_source: Source::Setting, codec_pref: codec, codec_source: Source::Setting }
}
#[test]
fn live_switch_restarts_encoder_and_defers_codec() {
let nv = selection_of(Encoder::Nvenc, CodecPref::Auto);
assert!(plan_switch(Encoder::Nvenc, CodecPref::Auto, &nv, crate::capture_setting::CHROMA_420).is_none());
let to_cpu = plan_switch(Encoder::Nvenc, CodecPref::Auto, &selection_of(Encoder::Cpu, CodecPref::Auto), crate::capture_setting::CHROMA_444).unwrap();
assert_eq!(to_cpu.encoder, Some(Encoder::Cpu));
assert_eq!(to_cpu.reason, SwitchReason::Encoder);
assert!(!to_cpu.chroma_downgraded);
assert_eq!(to_cpu.chroma, crate::capture_setting::CHROMA_444);
let to_vaapi = plan_switch(Encoder::Nvenc, CodecPref::H265, &selection_of(Encoder::Vaapi, CodecPref::H265), crate::capture_setting::CHROMA_444).unwrap();
assert_eq!(to_vaapi.encoder, Some(Encoder::Vaapi));
assert!(to_vaapi.chroma_downgraded);
assert_eq!(to_vaapi.chroma, crate::capture_setting::CHROMA_420);
let codec = plan_switch(Encoder::Nvenc, CodecPref::Auto, &selection_of(Encoder::Nvenc, CodecPref::H264), crate::capture_setting::CHROMA_420).unwrap();
assert_eq!(codec.encoder, None);
assert_eq!(codec.reason, SwitchReason::CodecDeferred);
let both = plan_switch(Encoder::Cpu, CodecPref::Auto, &selection_of(Encoder::Nvenc, CodecPref::H264), crate::capture_setting::CHROMA_420).unwrap();
assert_eq!(both.encoder, Some(Encoder::Nvenc));
assert_eq!(both.reason, SwitchReason::Encoder);
// The log reason is the source of the new selection (setting / env / auto), not a fixed word.
for (source, label) in [(Source::Setting, "setting"), (Source::Env, "env"), (Source::Auto, "auto")] {
let mut next = selection_of(Encoder::Vaapi, CodecPref::Auto);
next.encoder_source = source;
let plan = plan_switch(Encoder::Nvenc, CodecPref::Auto, &next, crate::capture_setting::CHROMA_420).unwrap();
assert!(plan.encoder.is_some());
assert_eq!(encoder_source_label(next.encoder_source), label);
}
}
#[test]
fn reload_does_not_clear_the_probe_cache() {
let _reload = RELOAD_TEST_LOCK.lock().unwrap_or_else(|e| e.into_inner());
let _guard = PROBE_TEST_LOCK.lock().unwrap_or_else(|e| e.into_inner());
let report = probe_report(true, &[ProbeOutcome::Ok, ProbeOutcome::Ok]);
store_probe(report.clone());
let before = reload_generation_value();
notify_reload();
assert_eq!(reload_generation_value(), before + 1);
assert_eq!(cached_probe(), Some(report));
assert!(reload_since_session(before, reload_generation_value()));
assert!(!reload_since_session(reload_generation_value(), reload_generation_value()));
clear_probe();
}
#[test]
fn probe_finish_is_not_a_reload_since_the_session_snapshot() {
let _reload = RELOAD_TEST_LOCK.lock().unwrap_or_else(|e| e.into_inner());
let at_session = reload_generation_value();
// A finished background probe updates the cache only. It does not bump the generation.
assert!(!reload_since_session(at_session, reload_generation_value()));
notify_reload();
assert!(reload_since_session(at_session, reload_generation_value()));
}
#[test]
fn mark_reload_seen_clears_has_changed() {
let _reload = RELOAD_TEST_LOCK.lock().unwrap_or_else(|e| e.into_inner());
let rt = tokio::runtime::Builder::new_current_thread().enable_all().build().unwrap();
rt.block_on(async {
let mut watch = subscribe_reload();
let _ = watch.borrow_and_update();
publish_reload();
assert!(watch.has_changed().unwrap());
let _ = watch.borrow_and_update();
assert!(!watch.has_changed().unwrap());
});
}
/// Codec at CONTROL open is `preferred_codec_for` on the session snapshot.
/// Auto + CPU uses H.264 when both codecs are negotiated; auto + NVENC keeps H.265.
/// Forced codec ignores the encoder. 真彩 does not switch codec (true_color_keeps_codec_and_vaapi_reports_420).
+1 -1
View File
@@ -78,7 +78,7 @@ async fn exercise(fail_wake: usize, fail_capture: bool) {
let (settings_tx, settings_rx) = tokio::sync::watch::channel(settings);
let selection = crate::video_select::resolve_pair(Some("cpu"), None, Some("h264"), None, false, None);
let mut task = tokio::spawn(stream_desktop(host.clone(), track.clone(), (640, 480),
DISPLAY.into(), None, settings_rx, Arc::new(settings_tx), Arc::new(AtomicBool::new(false)), selection));
DISPLAY.into(), None, settings_rx, Arc::new(settings_tx), Arc::new(AtomicBool::new(false)), selection, None));
let result = if fail_capture {
Some((&mut task).await.unwrap())
} else {
+136 -9
View File
@@ -204,11 +204,13 @@ pub fn text_probe()->Result<(),String> {
Ok(())
}
// Opt-in single-track monitor switching for Hyprland. The existing native engine owns
// capture/pointer binding; no compositor layout or user credentials are modified.
// Opt-in single-track monitor switching: Hyprland outputs (UU_WAYLAND_MULTISCREEN) or X11 RandR
// monitors (UU_X11_MULTISCREEN). The existing engines own capture/pointer binding; X11 crops the
// root to the selected monitor. No compositor layout or user credentials are modified.
#[derive(Clone, Debug)]
pub struct Output { pub name:String, pub width:u32, pub height:u32, pub fps:i32 }
static OUTPUTS: std::sync::OnceLock<Vec<Output>> = std::sync::OnceLock::new();
pub struct Output { pub name:String, pub width:u32, pub height:u32, pub fps:i32, pub x:i32, pub y:i32 }
struct Inventory { outputs:Vec<Output>, x11:bool }
static OUTPUTS: std::sync::OnceLock<Inventory> = std::sync::OnceLock::new();
#[derive(Default)]
struct Selection { id:usize, generation:u64, presented:Option<u64>, failed:bool }
impl Selection {
@@ -221,19 +223,77 @@ impl Selection {
fn ready(&self)->bool {self.presented==Some(self.generation)}
}
static SELECTION:std::sync::Mutex<Selection>=std::sync::Mutex::new(Selection {id:0,generation:0,presented:None,failed:false});
pub fn outputs() -> &'static [Output] {
fn inventory() -> &'static Inventory {
OUTPUTS.get_or_init(|| {
let backend=crate::desktop_backend::detect().ok();
if backend==Some(crate::desktop_backend::DesktopBackend::X11) && !crate::desktop_backend::headless()
&& std::env::var("UU_X11_MULTISCREEN").ok().as_deref()==Some("1") {
let outputs=x11_outputs();
return Inventory {x11:!outputs.is_empty(),outputs};
}
if !cfg!(all(target_os="linux",feature="wayland"))
|| std::env::var("UU_WAYLAND_MULTISCREEN").ok().as_deref()!=Some("1")
|| crate::desktop_backend::detect().ok()!=Some(crate::desktop_backend::DesktopBackend::Wayland) {return Vec::new();}
|| backend!=Some(crate::desktop_backend::DesktopBackend::Wayland) {return Inventory {outputs:Vec::new(),x11:false};}
let output=std::process::Command::new("hyprctl").args(["monitors","-j"]).output();
let result=output.map_err(|_|"hyprctl unavailable").and_then(|output| {
if !output.status.success() {return Err("hyprctl failed");}
parse_outputs(&output.stdout,&std::env::var("UU_WAYLAND_OUTPUT").unwrap_or_default())
});
match result {Ok(outputs)=>outputs,Err(reason)=>{log::warn!("Wayland multi-screen disabled: {}",reason);Vec::new()}}
let outputs=match result {Ok(outputs)=>outputs,Err(reason)=>{log::warn!("Wayland multi-screen disabled: {}",reason);Vec::new()}};
Inventory {outputs,x11:false}
})
}
pub fn outputs() -> &'static [Output] {&inventory().outputs}
/// X11 monitors are advertised: the stream captures the selected monitor's region of the root.
pub fn x11_multiscreen()->bool {inventory().x11}
/// Read once, like the Hyprland inventory: a changed monitor layout needs a host restart.
fn x11_outputs()->Vec<Output> {
let mut command=std::process::Command::new("xrandr");
if let Some(display)=crate::capture::x11_display().or_else(||std::env::var("DISPLAY").ok()).filter(|d|!d.is_empty()) {
command.arg("--display").arg(display);
}
let result=command.arg("--listmonitors").output().map_err(|_|"xrandr unavailable").and_then(|output| {
if !output.status.success() {return Err("xrandr failed");}
parse_x11_monitors(&String::from_utf8_lossy(&output.stdout),&std::env::var("UU_X11_OUTPUT").unwrap_or_default(),crate::video::display_fps() as i32)
});
match result {
Ok(outputs) if outputs.len()>=2=>{log::info!("X11 multi-screen: {} monitors",outputs.len());outputs},
Ok(_)=>{log::warn!("X11 multi-screen disabled: fewer than two monitors");Vec::new()},
Err(reason)=>{log::warn!("X11 multi-screen disabled: {}",reason);Vec::new()},
}
}
/// `xrandr --listmonitors`: ` 0: +*HDMI-0 1920/527x1080/296+1920+0 HDMI-0` (`*` = primary).
/// The preferred monitor (UU_X11_OUTPUT, else the primary) is id 0; the rest go left to right.
fn parse_x11_monitors(text:&str,preferred:&str,fps:i32)->Result<Vec<Output>,&'static str> {
fn geometry(text:&str)->Option<(u32,u32,i32,i32)> {
let (width,rest)=text.split_once('x')?;
let split=rest.find('+')?;
let (height,offsets)=rest.split_at(split);
let mut offsets=offsets[1..].split('+');
let size=|v:&str|v.split('/').next()?.parse::<u32>().ok();
let (x,y)=(offsets.next()?.parse::<i32>().ok()?,offsets.next()?.parse::<i32>().ok()?);
if offsets.next().is_some() || x<0 || y<0 {return None;}
Some((size(width)?,size(height)?,x,y))
}
let mut seen=std::collections::HashSet::new();
let mut primary=String::new();
let mut outputs=Vec::new();
for line in text.lines().skip(1) {
let mut fields=line.split_whitespace();
let (Some(_),Some(tag),Some(rect))=(fields.next(),fields.next(),fields.next()) else {continue};
let name=tag.trim_start_matches(['+','*']);
let Some((width,height,x,y))=geometry(rect) else {continue};
if name.is_empty() || name.len()>127 || !seen.insert(name.to_owned())
|| width<2 || height<2 || width>16384 || height>16384 || u64::from(width)*u64::from(height)*4>256*1024*1024 {continue;}
if tag.contains('*') {primary=name.to_owned();}
outputs.push(Output {name:name.into(),width,height,fps,x,y});
}
let first=if preferred.is_empty() {primary} else {preferred.to_owned()};
outputs.sort_by_key(|m| (m.name!=first,m.x,m.y));
outputs.truncate(16);
if outputs.is_empty() || (!preferred.is_empty() && outputs[0].name!=preferred) {return Err("No capturable preferred output");}
Ok(outputs)
}
fn parse_outputs(json:&[u8],preferred:&str)->Result<Vec<Output>,&'static str> {
let monitors=serde_json::from_slice::<Vec<serde_json::Value>>(json).map_err(|_|"Invalid monitor inventory")?;
let mut seen=std::collections::HashSet::new();
@@ -244,7 +304,7 @@ fn parse_outputs(json:&[u8],preferred:&str)->Result<Vec<Output>,&'static str> {
let height=u32::try_from(m["height"].as_u64()?).ok()?;
if name.is_empty() || name.len()>127 || name.contains('\0') || !seen.insert(name.to_owned())
|| width<2 || height<2 || width>16384 || height>16384 || u64::from(width)*u64::from(height)*4>256*1024*1024 {return None;}
Some(Output {name:name.into(),width,height,fps:m["refreshRate"].as_f64()?.round().clamp(1.0,240.0) as i32})
Some(Output {name:name.into(),width,height,fps:m["refreshRate"].as_f64()?.round().clamp(1.0,240.0) as i32,x:0,y:0})
}).collect();
outputs.sort_by_key(|m| (m.name!=preferred,m.name.clone()));
outputs.truncate(16);
@@ -255,6 +315,35 @@ pub fn selection()->(usize,u64) {let s=SELECTION.lock().unwrap();(s.id,s.generat
pub fn selected()->usize {selection().0}
pub fn source(id:usize)->Option<&'static Output> {outputs().get(id)}
pub fn input_size(fallback:(u32,u32))->(u32,u32) {source(selected()).map_or(fallback,|s|(s.width,s.height))}
/// Region the encoder captures for this display: the Wayland output, or the selected X11 monitor.
pub fn capture_source(display:&str,portal:bool,id:usize)->Option<&'static Output> {
if display.starts_with("wayland:") || (!portal && !display.starts_with("kms:") && x11_multiscreen()) {source(id)} else {None}
}
/// Offset of the selected X11 monitor in the root: absolute input is relative to that monitor.
pub fn x11_placement()->Option<(i32,i32)> {
if !x11_multiscreen() {return None;}
source(selected()).map(|s|(s.x,s.y))
}
/// Pixel size of one advertised output. Unknown ids keep `fallback` (connection size).
pub fn source_size(id:usize,fallback:(u32,u32))->(u32,u32) {
#[cfg(test)]
if let Some(outputs)=*test_outputs().lock().unwrap_or_else(|e|e.into_inner()) {
return outputs.get(id).map_or(fallback,|s|(s.width,s.height));
}
source(id).map_or(fallback,|s|(s.width,s.height))
}
#[cfg(test)]
fn test_outputs()->&'static std::sync::Mutex<Option<&'static [Output]>> {
static SLOT:std::sync::OnceLock<std::sync::Mutex<Option<&'static [Output]>>>=std::sync::OnceLock::new();
SLOT.get_or_init(||std::sync::Mutex::new(None))
}
/// Native size written into CaptureSettingSync. Wayland uses the output the encoder is reading
/// (`source_id`), which can differ from the size captured when the connection opened; so does an
/// X11 monitor with UU_X11_MULTISCREEN. Otherwise X11, portal and KMS keep the connection size
/// (X11 mode changes go through `x11_resized`).
pub fn sync_native(display:&str,source_id:usize,connection:(u32,u32))->(u32,u32) {
if display.starts_with("wayland:") || (!display.starts_with("kms:") && x11_multiscreen()) {source_size(source_id,connection)} else {connection}
}
pub fn input_ready()->bool {outputs().is_empty() || SELECTION.lock().unwrap().ready()}
pub fn switch_failed()->bool {SELECTION.lock().unwrap().failed}
pub fn presented(id:usize,generation:u64) {SELECTION.lock().unwrap().sent(id,generation);}
@@ -263,7 +352,12 @@ pub fn failed(id:usize,generation:u64) {
if (state.id,state.generation)==(id,generation) {state.failed=true;}
}
pub fn select(id:usize)->Result<(),String> {
let output=source(id).ok_or("Unknown Wayland screen")?;
let output=source(id).ok_or("Unknown screen")?;
if x11_multiscreen() {
SELECTION.lock().unwrap().begin(id);
log::info!("X11 screen selected: id={} source={}x{}+{}+{}",id,output.width,output.height,output.x,output.y);
return Ok(());
}
#[cfg(all(target_os="linux",feature="wayland"))]
{
let name=std::ffi::CString::new(output.name.as_str()).map_err(|_|"Invalid output name")?;
@@ -353,4 +447,37 @@ mod selection_regressions {
assert_eq!(outputs.len(),1);assert_eq!(outputs[0].name,"normal");
assert!(parse_outputs(b"not JSON","").is_err());
}
#[test]
fn x11_monitors_keep_their_root_offsets() {
// #98: GNOME/X11, two 1920x1080 monitors side by side, primary on the right.
let text="Monitors: 2\n 0: +*HDMI-0 1920/527x1080/296+1920+0 HDMI-0\n 1: +HDMI-1 1920/521x1080/293+0+0 HDMI-1\n";
let outputs=parse_x11_monitors(text,"",60).unwrap();
assert_eq!(outputs.iter().map(|m|(m.name.as_str(),m.width,m.height,m.x,m.y)).collect::<Vec<_>>(),
vec![("HDMI-0",1920,1080,1920,0),("HDMI-1",1920,1080,0,0)]);
let outputs=parse_x11_monitors(text,"HDMI-1",60).unwrap();
assert_eq!((outputs[0].name.as_str(),outputs[1].name.as_str()),("HDMI-1","HDMI-0"));
assert!(parse_x11_monitors(text,"DP-9",60).is_err());
// xrandr --setmonitor virtual monitors (output "none"); no primary: left to right.
let virtual_monitors="Monitors: 3\n 0: +A 1280/338x1024/270+1280+0 none\n 1: +B 1280/338x1024/270+0+0 none\n 2: C 0/0x0/0+0+0 none\n";
let outputs=parse_x11_monitors(virtual_monitors,"",30).unwrap();
assert_eq!(outputs.iter().map(|m|(m.name.as_str(),m.x)).collect::<Vec<_>>(),vec![("B",0),("A",1280)]);
assert!(parse_x11_monitors("Monitors: 1\n 0: +*X 1920/1x1080/1-10+0 X\n","",60).is_err());
assert!(parse_x11_monitors("garbage","",60).is_err());
}
#[test]
fn sync_native_follows_the_wayland_source_id() {
assert_eq!(sync_native(":0",1,(1920,1080)),(1920,1080));
assert_eq!(sync_native("kms:/dev/dri/card0",1,(1920,1080)),(1920,1080));
let inventory:&'static [Output]=Box::leak(vec![
Output {name:"eDP-1".into(),width:1920,height:1080,fps:60,x:0,y:0},
Output {name:"HDMI-A-1".into(),width:2560,height:1440,fps:75,x:0,y:0},
].into_boxed_slice());
*test_outputs().lock().unwrap()=Some(inventory);
// Connection opened on the first output; the encoder is reading the second.
assert_eq!(sync_native("wayland:wayland-0",1,(1920,1080)),(2560,1440));
assert_eq!(source_size(0,(800,600)),(1920,1080));
assert_eq!(sync_native("wayland:wayland-0",9,(800,600)),(800,600));
assert_eq!(sync_native(":0",1,(1920,1080)),(1920,1080));
*test_outputs().lock().unwrap()=None;
}
}
+66 -11
View File
@@ -65,6 +65,8 @@ impl WebRtcSession {
// Encoder, codec preference and 4:4:4 stay fixed for this peer (codec is negotiated at CONTROL open).
// Read once before the HEVC probe so a concurrent set-encoder/set-codec cannot split capability from CONTROL.
// reload_at_session is the generation at that snapshot. A probe that finishes later is not a reload.
let reload_at_session = crate::video_select::reload_generation_value();
let video_selection = crate::video_select::selection();
let hevc = desktop && crate::video::hevc_available(video_selection.encoder).await;
if hevc { crate::video_track::register_hevc(&mut m).map_err(|e| format!("Register HEVC failed: {e}"))?; }
@@ -305,6 +307,10 @@ impl WebRtcSession {
let portal=capture.portal.clone();
let stream_desktop = portal_desktop.clone();
let stream_selection = video_selection;
// Live encoder switch (SIGUSR2) sends CaptureSettingSync when chroma is downgraded.
let (chroma_sync_tx, chroma_sync_rx) = tokio::sync::mpsc::unbounded_channel::<Vec<u8>>();
let chroma_sync = (desktop && !cfg!(test)).then_some(chroma_sync_tx);
let chroma_sync_rx = Arc::new(std::sync::Mutex::new((!cfg!(test)).then_some(chroma_sync_rx)));
// File/terminal/port-mapping connections carry no desktop video.
let control_video_track = video_track.clone();
let stream_settings = video_settings.clone();
@@ -330,7 +336,7 @@ impl WebRtcSession {
let (capture_size, capture_display, portal) = screen.as_ref().map_or(
(capture_size, capture_display, portal),
|screen| ((screen.width, screen.height), screen.display.clone(), screen.portal.clone()));
if let Err(e) = crate::video::stream_desktop(streaming_pc, video_track, capture_size, capture_display, portal, video_settings_rx, stream_settings, idr_request, stream_selection).await {
if let Err(e) = crate::video::stream_desktop_at(streaming_pc, video_track, capture_size, capture_display, portal, video_settings_rx, stream_settings, idr_request, stream_selection, chroma_sync.clone(), reload_at_session).await {
// A send racing the viewer's close fails with a misleading track error.
if matches!(state_pc.connection_state(), RTCPeerConnectionState::Closed | RTCPeerConnectionState::Failed) {
log::info!("Live desktop stream ended: peer connection closed ({})", e);
@@ -421,6 +427,7 @@ impl WebRtcSession {
let peer_video_track = control_video_track.clone();
let peer_actions = peer_actions.clone();
let peer_selection = video_selection;
let chroma_sync_rx = chroma_sync_rx.clone();
if label == "FILE_DATA_CHANNEL" { *file_channel.lock().unwrap() = Some(d.clone()); }
Box::pin(async move {
@@ -442,17 +449,47 @@ impl WebRtcSession {
}));
}
// Ordered outbound queue for protocol replies produced outside this callback.
let (outbound, mut outbound_rx) = tokio::sync::mpsc::unbounded_channel::<Vec<u8>>();
// webrtc-rs announces the channel before handle_open (ready_state Connecting);
// send() returns ErrClosedPipe until Open. Draining CONTROL here would drop
// Message 25 and every later reply. Start CONTROL from the on_open below
// (one handler; a second on_open replaces it). Receiver taken once.
let mut control_drain: Option<Box<dyn (FnOnce() -> std::pin::Pin<Box<dyn std::future::Future<Output = ()> + Send>>) + Send + Sync>> = None;
let (outbound, outbound_rx) = tokio::sync::mpsc::unbounded_channel::<Vec<u8>>();
let outbound_rx = Arc::new(tokio::sync::Mutex::new(Some(outbound_rx)));
if label == "CONTROL_DATA_CHANNEL" {
if let Some(mut chroma_sync_rx) = chroma_sync_rx.lock().unwrap().take() {
let sync_out = outbound.clone();
let sync_seq = reply_sequence.clone();
tokio::spawn(async move {
while let Some(payload) = chroma_sync_rx.recv().await {
let timestamp = std::time::SystemTime::now().duration_since(std::time::UNIX_EPOCH).unwrap_or_default().as_secs();
let seq = sync_seq.fetch_add(1, std::sync::atomic::Ordering::Relaxed);
let _ = sync_out.send(crate::initialization::envelope(seq, timestamp, 25, &payload));
}
});
}
}
{
let out_channel = d.clone();
let out_label = label.clone();
tokio::spawn(async move {
while let Some(message) = outbound_rx.recv().await {
if let Err(e) = out_channel.send(&bytes::Bytes::from(message)).await {
log::warn!("{} send failed: {}", out_label, e); break;
}
}
});
let outbound_rx = outbound_rx.clone();
let start_drain = move || {
let out_channel = out_channel.clone();
let out_label = out_label.clone();
let outbound_rx = outbound_rx.clone();
Box::pin(async move {
let Some(mut outbound_rx) = take_outbound_once(&outbound_rx).await else { return; };
tokio::spawn(async move {
while let Some(message) = outbound_rx.recv().await {
if let Err(e) = out_channel.send(&bytes::Bytes::from(message)).await {
log::warn!("{} send failed: {}", out_label, e); break;
}
}
});
}) as std::pin::Pin<Box<dyn std::future::Future<Output = ()> + Send>>
};
if label != "CONTROL_DATA_CHANNEL" { tokio::spawn(start_drain()); }
else { control_drain = Some(Box::new(start_drain)); }
}
let (capture_tx, mut capture_rx) = tokio::sync::mpsc::channel::<Vec<u8>>(16);
if matches!(label.as_str(),"CONTROL_DATA_CHANNEL"|"TEXT_DATA_CHANNEL") {
@@ -569,9 +606,11 @@ impl WebRtcSession {
}) else { continue; };
let Ok(rpc_fields) = crate::protocol::decode_wire(rpc) else { continue; };
// X11: 分辨率 changes the display mode itself, like the official Windows host; the stream
// then carries the new native size instead of a scaled one (desktop_mode).
// then carries the new native size instead of a scaled one (desktop_mode). With
// UU_X11_MULTISCREEN the monitor layout stays as it is and the stream is scaled.
let resized = if desktop && active_screen.init_error.is_none() && active_screen.portal.is_none()
&& active_screen.backend == crate::desktop_backend::DesktopBackend::X11 && crate::desktop_mode::enabled() {
&& active_screen.backend == crate::desktop_backend::DesktopBackend::X11 && crate::desktop_mode::enabled()
&& !crate::wayland::x11_multiscreen() {
match crate::capture_setting::requested_resolution(&rpc_fields) {
Some(request) => {
let display = active_screen.display.clone();
@@ -640,6 +679,7 @@ impl WebRtcSession {
let open_screen = screen.clone();
let open_selection = peer_selection;
d.on_open(Box::new(move || {
if let Some(start_drain) = control_drain { tokio::spawn(start_drain()); }
let init_actions = open_actions.clone();
let init_video = open_video.clone();
let init_track = open_track.clone();
@@ -1422,6 +1462,11 @@ fn negotiated_bundle_media(sdp: &str) -> Option<(String, u16)> {
None
}
/// First drain owns the outbound receiver; a later open must not start another.
async fn take_outbound_once<T>(slot: &tokio::sync::Mutex<Option<tokio::sync::mpsc::UnboundedReceiver<T>>>) -> Option<tokio::sync::mpsc::UnboundedReceiver<T>> {
slot.lock().await.take()
}
#[cfg(test)]
mod tests {
use super::negotiated_bundle_media;
@@ -1444,6 +1489,16 @@ mod tests {
let sdp = "a=group:BUNDLE data video\nm=video 9 RTP 98\na=mid:video\nm=application 9 SCTP 0\na=mid:data\n";
assert_eq!(negotiated_bundle_media(sdp), Some(("data".into(), 1)));
}
#[tokio::test]
async fn outbound_receiver_is_taken_once() {
let (tx, rx) = tokio::sync::mpsc::unbounded_channel::<Vec<u8>>();
let slot = std::sync::Arc::new(tokio::sync::Mutex::new(Some(rx)));
let first = super::take_outbound_once(&slot).await;
let second = super::take_outbound_once(&slot).await;
assert!(first.is_some());
assert!(second.is_none());
drop(tx);
}
}
#[cfg(test)]