Compare commits

..
10 Commits
Author SHA1 Message Date
VallierDevandClaude Opus 5.5 c461db10a4 release: v0.2.48
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-03 16:34:29 +08:00
Mr. Error 4c86c7f782 Privacy: auto-enable on desktop connect (UU_PRIVACY_AUTO) (#161)
* feat(privacy): auto-enable the privacy screen on desktop connect

`UU_PRIVACY_AUTO=picture` / `screen-off` (or 2 / 3) enables the privacy
screen when the first desktop controller connects. Off by default. The
switch waits for the portal capture session and retries while it is
missing; the viewer's own RPC 7 cancels a pending auto-enable for that
session.

The privacy state poller that pushes SystemMetrics and SystemStateChange
now starts for desktop peers too (it only ran for a tool peer promoted to
desktop), and it pushes once on its first tick. A mode the viewer did not
request, such as an auto-enable, therefore reaches its menu, and the
state message also goes to TEXT, which viewers read for privacy replies.

Verified on KDE Plasma Wayland with an iOS viewer: auto picture and auto
screen-off both engage, the menu reflects the mode after the push, and a
disconnect restores the physical outputs. `cargo test --features
wayland,portal`: 320 passed, 10 ignored.

* fix(privacy): let a viewer request win against auto-enable races

Two paths could still override an explicit choice:

- the override was checked before acquiring STATE, so an RPC 7 applied in
  that window could disable privacy and the auto thread could turn it back
  on; the check now happens inside the same lock that enters the mode
- `session_started` captured the override counter as its baseline, so a
  request that arrived after CONTROL opened but before the session counter
  started was treated as unrelated and auto-enable ran anyway; the counter
  is now a flag set by any RPC 7 and cleared only when the last desktop
  session ends

docs/privacy-screen.md now says remote-assistance (guest) sessions are
covered too, and that supported hosts push the current privacy state once
on every desktop connect.
2026-11-03 16:33:41 +08:00
VallierDevandClaude Opus 5.5 81e9ccfa05 fix(signaling): log the sanitized reason when signaling fails to connect
The WebSocket transport already reduces errors to a category or HTTP status
without the token or endpoint, so log it instead of 'details omitted' to tell
a refused upgrade from a network failure (#166).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-03 15:34:34 +08:00
Zhenqiang Weng c0abdeae72 fix(viewer): restore held modifier combinations after focus changes (#165) 2026-11-03 15:33:13 +08:00
Zhenqiang Weng 1dad755823 fix(viewer): use theme icons in the launcher (#158) 2026-11-03 14:01:02 +08:00
Jeff Zhang fcfd2b6717 feat(wallpaper): discover Omarchy backgrounds automatically (#157)
Read Omarchy's current/background link (XDG_STATE_HOME, falling back to XDG_CONFIG_HOME) on Hyprland; explicit UU_WALLPAPER keeps precedence.
2026-11-03 12:31:33 +08:00
VallierDevandClaude Opus 5.5 73c503a244 release: v0.2.47
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-03 01:26:54 +08:00
Jeff ZhangandJeff Zhang 3bce605eaa feat(host): 上报系统壁纸,补齐设备卡片缩略图 (#153)
* feat(host): report system wallpaper for device cards

* fix(host): handle quoted wallpaper paths and KDE defaults

* docs: align wallpaper guidance and disclose default uploads

* fix(host): validate active KDE plugin for stored wallpapers

* fix(host): support Plasma 5 wallpaper config queries

* fix(host): exclude Plasma panels from wallpaper reporting

* fix(host): follow image symlinks in KDE wallpaper packages

---------

Co-authored-by: Jeff Zhang <[email protected]>
2026-11-03 01:25:57 +08:00
VallierDevandClaude Opus 5.5 ebdd362452 release: v0.2.46
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-02 18:23:23 +08:00
VallierDevandClaude Opus 5.5 26811018e0 fix(clipboard): name the Unicode text offer predefined_13 for Windows viewers
A CF_UNICODETEXT name made the Windows viewer register a custom
clipboard format instead of using id 13, so Linux text never reached
the standard Unicode format. Fixes #151.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-02 18:23:23 +08:00
18 changed files with 841 additions and 31 deletions

No files matched your search

Generated
+1 -1
View File
@@ -2772,7 +2772,7 @@ checksum = "06abde3611657adf66d383f00b093d7faecc7fa57071cce2578660c9f1010821"
[[package]]
name = "uu-remote-linux"
version = "0.2.45"
version = "0.2.48"
dependencies = [
"ab_glyph",
"async-trait",
+1 -1
View File
@@ -1,6 +1,6 @@
[package]
name = "uu-remote-linux"
version = "0.2.45"
version = "0.2.48"
edition = "2021"
default-run = "uuremote-server"
authors = ["uu-remote-linux contributors"]
+12 -1
View File
@@ -25,6 +25,14 @@
## Appearance / 外观
Launcher icons use the system icon theme instead of emoji glyphs, so they do not depend on emoji font coverage.
Signed-in graphical hosts report the system wallpaper for disconnected device cards in official clients
(no desktop-window screenshot). GNOME/Cinnamon, KDE, Xfce and Omarchy on Hyprland are supported (following the current wallpaper); checks run every 60 seconds
and unchanged content is not uploaded again. Other desktops can set `UU_WALLPAPER=/absolute/path/image.png`
(PNG/JPEG/WebP). Set `UU_WALLPAPER_UPLOAD=0` to disable; guest and headless hosts skip reporting.
See [protocol evidence and limitations](docs/wallpaper-protocol.md).
Choose **System / Light / Dark** (default: System) in the viewer's **Settings → General → Appearance**, or via the gear settings button in host / tool windows.
The choice is saved to `$XDG_CONFIG_HOME/uuremote/theme` (default `~/.config/uuremote/theme`).
@@ -151,7 +159,7 @@ On niri, `niri msg --json outputs` enumerates enabled monitors. Normal and 90/18
| True color (4:4:4) | Supported (v0.1.15): the default FFmpeg pipeline with NVENC / libx264 encodes H.264 High 4:4:4; `inproc-av` native NVENC encodes H.264 High 4:4:4 / HEVC FRExt; VAAPI stays 4:2:0 and reports that to the client |
| HDR | Not implemented |
| Super screen / virtual display | Not implemented |
| Privacy screen on the host | Experimental, KDE Plasma Wayland (portal) only; off, picture and screen-off status labels verified with Mac 4.43.0; see [docs/privacy-screen.md](docs/privacy-screen.md) |
| Privacy screen on the host | Experimental, KDE Plasma Wayland (portal) only; off, picture and screen-off status labels verified with Mac 4.43.0; `UU_PRIVACY_AUTO=picture` / `screen-off` enables it automatically on desktop connect; see [docs/privacy-screen.md](docs/privacy-screen.md) |
| Microphone (viewer audio played on the host) | Not implemented (needs a virtual sound card) |
| Plugins such as the WoW queue notifier | Not supported; the client is told that no plugins exist |
| Linux login screen | The system login screen (before anyone logs in to the Linux desktop) cannot be controlled yet; use headless mode or a virtual desktop (see below). This is about the Linux login: **without a UU account** the host can now be used through remote assistance |
@@ -458,6 +466,7 @@ flowchart LR
## Security and privacy
- By default, signed-in graphical hosts upload the current wallpaper image to UU's file service for device-card backgrounds. Set `UU_WALLPAPER_UPLOAD=0` to disable this upload.
- Logs never contain keystrokes, terminal text, clipboard contents, file contents, passwords or tokens.
- For auto unlock the password is stored in the **viewer** (the official client). The host only checks it
once with PAM; it is never written to disk or logs.
@@ -604,6 +613,8 @@ separate from the host `uuremote-server`; the default host build and behaviour a
terminal emulator (`TERMINAL` selects one). From source: `sudo apt install libsdl2-dev`, then
`cargo build --release --locked --features native-viewer,viewer-sdl --bin uuremote-viewer`.
Key combinations use the left/right modifier state attached to each SDL key event. Focus loss releases remote keys; after focus returns, the next non-modifier key restores any still-held Shift/Ctrl/Alt/Win (Command on Mac). This is built in, with no adapter or setting required.
SDL clipboard access reuses the desktop window to avoid temporary-window Dock churn on GNOME Wayland (#37).
On niri, data-control-capable `wl-clipboard` is used instead, so synchronization does not require window focus.
Other SDL backends synchronize only while that window is focused. The 30 KiB text limit applies. Selections without a supported
+8 -1
View File
@@ -21,6 +21,10 @@
## 外观 / Appearance
启动器图标使用系统主题的符号图标,避免缺少 emoji 字体时显示方框。
已登录的图形主机会上报系统壁纸,供官方客户端的设备卡片在未连接时显示背景图(不是桌面窗口截图)。支持 GNOME/Cinnamon、KDE、Xfce 和 Hyprland 下的 Omarchy(自动跟随当前壁纸);每 60 秒检查一次,内容不变则不重复上传。其他桌面可用 `UU_WALLPAPER=/绝对路径/图片.png` 指定 PNG/JPEG/WebP;`UU_WALLPAPER_UPLOAD=0` 关闭。访客和无桌面模式跳过上报。协议依据与限制见 [设备壁纸上报](docs/wallpaper-protocol.md)。
在控制端的 **设置 → 常规 → 外观**,或主机 / 工具窗口的齿轮设置按钮中选择 **跟随系统 / 浅色 / 深色**(默认跟随系统)。
选择保存在 `$XDG_CONFIG_HOME/uuremote/theme`(默认 `~/.config/uuremote/theme`)。
@@ -136,7 +140,7 @@ niri 会话通过 `niri msg --json outputs` 枚举已启用的显示器。普通
| 真彩(4:4:4) | 支持(v0.1.15):NVENC / libx264 的默认 FFmpeg 管线输出 H.264 High 4:4:4;`inproc-av` 原生 NVENC 输出 H.264 High 4:4:4 / HEVC FRExt;VAAPI 管线仍为 4:2:0,并如实回报给客户端 |
| HDR | 未实现 |
| 超级屏 / 虚拟显示器 | 未实现 |
| 被控端防窥模式 | 实验性,仅 KDE Plasma Wayland(portal);Mac 4.43.0 已验证不启用、隐私屏保、关闭显示屏三种状态回显,见 [docs/privacy-screen.md](docs/privacy-screen.md) |
| 被控端防窥模式 | 实验性,仅 KDE Plasma Wayland(portal);Mac 4.43.0 已验证不启用、隐私屏保、关闭显示屏三种状态回显;`UU_PRIVACY_AUTO=picture` / `screen-off` 可在桌面连接时自动开启,见 [docs/privacy-screen.md](docs/privacy-screen.md) |
| 麦克风(控制端声音传到被控端) | 未实现(需要虚拟声卡) |
| 魔兽世界排队提醒等插件 | 不支持,会明确告诉客户端「无插件」 |
| Linux 系统登录界面 | 还不支持控制开机后的系统登录界面(还没有人登录 Linux 桌面时);这种情况可以用无头模式或虚拟桌面(见下文)。注意:这里说的是 Linux 系统登录,**不登录 UU 账号**现在可以通过「远程协助」使用 |
@@ -402,6 +406,7 @@ flowchart LR
## 安全与隐私
- 已登录的图形主机默认会将当前壁纸图片上传到 UU 的文件服务,供设备卡片显示背景;可用 `UU_WALLPAPER_UPLOAD=0` 关闭上传。
- 日志不记录键盘输入、终端内容、剪贴板内容、文件内容、密码和令牌。
- 自动解锁的密码保存在**控制端**(官方客户端)里,被控端只拿来做一次 PAM 校验,不落盘、不写日志。
- 能连上这台机器的,只有登录了同一个 UU 账号的设备。请保管好你的 UU 账号。
@@ -530,6 +535,8 @@ xfce4-session xfce4-panel xfdesktop xfwm4 gnome-terminal`。
`ffmpeg` 命令;SDL 桌面窗口直接同步文本剪贴板(Wayland/X11),无需额外剪贴板工具;终端功能需要本机终端程序(可用 `TERMINAL` 指定)。
从源码构建:`sudo apt install libsdl2-dev`,然后 `cargo build --release --locked --features native-viewer,viewer-sdl --bin uuremote-viewer`。
组合键使用 SDL 按键事件携带的左右修饰键状态;窗口失焦时释放远端按键,重新聚焦后的下一次普通按键会恢复仍按住的 Shift/Ctrl/Alt/Win(Mac 为 Command)。此行为内置,无需适配库或开关。
SDL 剪贴板复用桌面窗口,避免 GNOME Wayland 上临时窗口引起的 Dock 跳动(#37)。niri 改用支持 data-control 的
`wl-clipboard`,不需要桌面窗口保持焦点;其他 SDL 后端仅在桌面窗口获得焦点时同步。
保留 30 KiB 文本上限;跳过不含支持的文本格式的本地选择,空文本的识别取决于 SDL2 后端。不带 SDL 的构建保留命令后端。
+32 -16
View File
@@ -73,6 +73,14 @@ static GtkWidget *label(const char *text, const char *cls) {
return l;
}
static GtkWidget *button(const char *text, const char *cls) { GtkWidget *b = gtk_button_new_with_label(text); if (cls) add_class(b, cls); return b; }
static GtkWidget *icon(const char *name, int size) {
GtkWidget *image = gtk_image_new_from_icon_name(name, GTK_ICON_SIZE_BUTTON);
gtk_image_set_pixel_size(GTK_IMAGE(image), size); return image;
}
static GtkWidget *icon_button(const char *text, const char *name, const char *cls) {
GtkWidget *b = button(text, cls); gtk_button_set_image(GTK_BUTTON(b), icon(name, 17));
gtk_button_set_always_show_image(GTK_BUTTON(b), TRUE); return b;
}
static GtkWidget *hbox(int spacing) { return gtk_box_new(GTK_ORIENTATION_HORIZONTAL, spacing); }
static GtkWidget *vbox(int spacing) { return gtk_box_new(GTK_ORIENTATION_VERTICAL, spacing); }
static GtkWidget *platform_icon(int platform, int online) {
@@ -124,10 +132,12 @@ static void open_more(void) {
GtkWidget *area = gtk_dialog_get_content_area(GTK_DIALOG(dialog)), *box = vbox(10);
gtk_container_set_border_width(GTK_CONTAINER(box), 22);
gtk_box_pack_start(GTK_BOX(box), label(L("更多工具", "More tools"), "h2"), FALSE, FALSE, 6);
const char *names[] = {L("🗂 文件传输", "🗂 File transfer"), L("▶ 观看模式", "▶ Watch mode"), L("⌨ 终端", "⌨ Terminal"), L("⇄ 端口映射", "⇄ Port mapping"), L("⏻ 远程开机", "⏻ Wake on LAN"), L("↻ 重启", "↻ Restart"), L("⏻ 关机", "⏻ Shut down"), L("🗑 删除设备", "🗑 Remove device")};
const char *names[] = {L("文件传输", "File transfer"), L("观看模式", "Watch mode"), L("终端", "Terminal"), L("端口映射", "Port mapping"), L("远程开机", "Wake on LAN"), L("重启", "Restart"), L("关机", "Shut down"), L("删除设备", "Remove device")};
const char *icons[] = {"folder-symbolic", "media-playback-start-symbolic", "utilities-terminal-symbolic", "network-wired-symbolic", "computer-symbolic", "view-refresh-symbolic", "system-shutdown-symbolic", "user-trash-symbolic"};
const char *kinds[] = {"file", "watch", "terminal", "portmap", "wol", "reboot", "shutdown", "unbind"};
for (int i = 0; i < 8; i++) {
GtkWidget *b = gtk_button_new(), *line = hbox(10); add_class(b, "cardbtn");
gtk_box_pack_start(GTK_BOX(line), icon(icons[i], 20), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(line), label(names[i], "devname"), TRUE, TRUE, 0);
gtk_box_pack_end(GTK_BOX(line), label("›", "hint"), FALSE, FALSE, 0);
gtk_container_add(GTK_CONTAINER(b), line);
@@ -224,7 +234,8 @@ static void on_card(GtkButton *b, gpointer index) { (void)b; show_device(GPOINTE
static GtkWidget *nav_row(const char *icon, const char *text, const char *kind) {
GtkWidget *row = gtk_list_box_row_new(), *line = hbox(10);
gtk_box_pack_start(GTK_BOX(line), label(icon, "devname"), FALSE, FALSE, 0);
GtkWidget *image = gtk_image_new_from_icon_name(icon, GTK_ICON_SIZE_BUTTON);
gtk_box_pack_start(GTK_BOX(line), image, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(line), label(text, "devname"), TRUE, TRUE, 0);
gtk_container_add(GTK_CONTAINER(row), line);
g_object_set_data_full(G_OBJECT(row), "kind", g_strdup(kind), g_free);
@@ -298,7 +309,7 @@ static gboolean apply_devices(gpointer d) {
gtk_box_pack_start(GTK_BOX(all_box), card, FALSE, FALSE, 4);
}
pthread_mutex_unlock(&d_lock);
gtk_list_box_insert(GTK_LIST_BOX(device_list), nav_row("◼", L("全部设备", "All devices"), "all"), -1);
gtk_list_box_insert(GTK_LIST_BOX(device_list), nav_row("view-grid-symbolic", L("全部设备", "All devices"), "all"), -1);
gtk_widget_show_all(device_list); gtk_widget_show_all(all_box);
return G_SOURCE_REMOVE;
}
@@ -367,9 +378,10 @@ static GtkWidget *build_device(void) {
gtk_overlay_add_overlay(GTK_OVERLAY(preview), enter);
gtk_box_pack_start(GTK_BOX(page), preview, FALSE, FALSE, 0);
GtkWidget *tools = hbox(0); add_class(tools, "toolbar");
const char *names[] = {L("🗂 文件传输", "🗂 File transfer"), L("▶ 观看模式", "▶ Watch mode"), L("⌨ 终端", "⌨ Terminal"), L("⇄ 端口映射", "⇄ Port mapping"), "▦"}, *kinds[] = {"file", "watch", "terminal", "portmap", "more"};
const char *names[] = {L("文件传输", "File transfer"), L("观看模式", "Watch mode"), L("终端", "Terminal"), L("端口映射", "Port mapping"), L("更多", "More")}, *kinds[] = {"file", "watch", "terminal", "portmap", "more"};
const char *tool_icons[] = {"folder-symbolic", "media-playback-start-symbolic", "utilities-terminal-symbolic", "network-wired-symbolic", "view-more-symbolic"};
for (int i = 0; i < 5; i++) {
GtkWidget *b = button(names[i], "tool");
GtkWidget *b = icon_button(names[i], tool_icons[i], "tool");
g_signal_connect(b, "clicked", G_CALLBACK(on_tool), (gpointer)kinds[i]);
gtk_box_pack_start(GTK_BOX(tools), b, i < 4, TRUE, 0);
if (i < 4) gtk_box_pack_start(GTK_BOX(tools), gtk_separator_new(GTK_ORIENTATION_VERTICAL), FALSE, FALSE, 0);
@@ -581,7 +593,7 @@ static void open_settings(void) {
GtkWidget *gscroll = gtk_scrolled_window_new(NULL, NULL);
gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(gscroll), GTK_POLICY_NEVER, GTK_POLICY_AUTOMATIC);
gtk_container_add(GTK_CONTAINER(gscroll), general);
gtk_stack_add_titled(GTK_STACK(tabs), gscroll, "general", L("⚙ 常规", "⚙ General"));
gtk_stack_add_titled(GTK_STACK(tabs), gscroll, "general", L("常规", "General"));
// 安全
GtkWidget *security = settings_page();
const char *verify[] = {L("仅使用临时验证码", "Temporary code only"), L("仅使用自定义验证码", "Custom code only"), L("临时与自定义验证码", "Temporary and custom codes")};
@@ -593,7 +605,7 @@ static void open_settings(void) {
gtk_box_pack_start(GTK_BOX(security), settings_card(s1, 2), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(security), settings_card(s2, 1), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(security), settings_card(s3, 1), FALSE, FALSE, 0);
gtk_stack_add_titled(GTK_STACK(tabs), security, "security", L("🔒 安全", "🔒 Security"));
gtk_stack_add_titled(GTK_STACK(tabs), security, "security", L("安全", "Security"));
// 键盘
GtkWidget *keys = settings_page();
gtk_box_pack_start(GTK_BOX(keys), label(L("仅控制端响应的快捷键", "Viewer-only shortcuts"), "h2"), FALSE, FALSE, 0);
@@ -608,13 +620,13 @@ static void open_settings(void) {
for (int i = 0; i < 8; i++) k2[i] = setting_row(fns[i], NULL, edit_button(fns[i]));
gtk_box_pack_start(GTK_BOX(keys), settings_card(k2, 8), FALSE, FALSE, 0);
GtkWidget *kscroll = gtk_scrolled_window_new(NULL, NULL); gtk_container_add(GTK_CONTAINER(kscroll), keys);
gtk_stack_add_titled(GTK_STACK(tabs), kscroll, "keys", L("⌨ 键盘", "⌨ Keyboard"));
gtk_stack_add_titled(GTK_STACK(tabs), kscroll, "keys", L("键盘", "Keyboard"));
// 网络
GtkWidget *network = settings_page();
const char *proxy[] = {L("使用系统环境代理", "Use system proxy"), L("不使用代理", "No proxy")};
GtkWidget *n1[] = { setting_row(L("代理设置", "Proxy"), NULL, combo(proxy, 2)) };
gtk_box_pack_start(GTK_BOX(network), settings_card(n1, 1), FALSE, FALSE, 0);
gtk_stack_add_titled(GTK_STACK(tabs), network, "network", L("🌐 网络", "🌐 Network"));
gtk_stack_add_titled(GTK_STACK(tabs), network, "network", L("网络", "Network"));
gtk_box_pack_start(GTK_BOX(root), tabs, TRUE, TRUE, 0);
gtk_container_add(GTK_CONTAINER(settings_window), root);
gtk_widget_show_all(settings_window);
@@ -669,18 +681,21 @@ static void *run(void *arg) {
GtkWidget *side = vbox(0); add_class(side, "sidebar"); gtk_widget_set_size_request(side, 270, -1);
my_section = vbox(0);
GtkWidget *mh = hbox(8); gtk_widget_set_margin_start(mh, 18); gtk_widget_set_margin_top(mh, 22); gtk_widget_set_margin_bottom(mh, 6);
gtk_box_pack_start(GTK_BOX(mh), label(L("⧉ 我的设备", "⧉ My devices"), "section"), TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(mh), icon("computer-symbolic", 17), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(mh), label(L("我的设备", "My devices"), "section"), TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(my_section), mh, FALSE, FALSE, 0);
device_list = gtk_list_box_new(); g_signal_connect(device_list, "row-activated", G_CALLBACK(on_row), NULL);
gtk_box_pack_start(GTK_BOX(my_section), device_list, FALSE, FALSE, 0);
GtkWidget *scroll = gtk_scrolled_window_new(NULL, NULL); gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scroll), GTK_POLICY_NEVER, GTK_POLICY_AUTOMATIC);
GtkWidget *side_inner = vbox(0); gtk_box_pack_start(GTK_BOX(side_inner), my_section, FALSE, FALSE, 0);
GtkWidget *welcome_nav = gtk_list_box_new(); g_signal_connect(welcome_nav, "row-activated", G_CALLBACK(on_row), NULL);
GtkWidget *ah = label(L("⧉ 远程协助", "⧉ Remote assistance"), "section"); gtk_widget_set_margin_start(ah, 18); gtk_widget_set_margin_top(ah, 16); gtk_widget_set_margin_bottom(ah, 6);
GtkWidget *ah = hbox(8); gtk_widget_set_margin_start(ah, 18); gtk_widget_set_margin_top(ah, 16); gtk_widget_set_margin_bottom(ah, 6);
gtk_box_pack_start(GTK_BOX(ah), icon("network-workgroup-symbolic", 17), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(ah), label(L("远程协助", "Remote assistance"), "section"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(side_inner), ah, FALSE, FALSE, 0);
GtkWidget *assist = assist_list = gtk_list_box_new(); g_signal_connect(assist, "row-activated", G_CALLBACK(on_row), NULL);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("◧", L("开始协助", "Start assistance"), "assist"), -1);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("★", L("收藏设备", "Favorites"), "favorite"), -1);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("network-workgroup-symbolic", L("开始协助", "Start assistance"), "assist"), -1);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("starred-symbolic", L("收藏设备", "Favorites"), "favorite"), -1);
gtk_box_pack_start(GTK_BOX(side_inner), assist, FALSE, FALSE, 0);
gtk_list_box_unselect_all(GTK_LIST_BOX(assist));
(void)welcome_nav;
@@ -691,12 +706,13 @@ static void *run(void *arg) {
GtkWidget *main = vbox(0), *header = hbox(10); add_class(header, "header");
badge = gtk_label_new(""); add_class(badge, "badge");
title_label = label(L("全部设备", "All devices"), "title");
more_button = button("⋮", "hbtn"); g_signal_connect(more_button, "clicked", G_CALLBACK(on_more), NULL);
more_button = icon_button("", "view-more-symbolic", "hbtn"); gtk_widget_set_tooltip_text(more_button, L("设备信息", "Device information")); g_signal_connect(more_button, "clicked", G_CALLBACK(on_more), NULL);
gtk_box_pack_start(GTK_BOX(header), badge, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(header), title_label, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(header), more_button, FALSE, FALSE, 0);
const char *icons[] = {"☰", "◉", "🔔"}, *kinds[] = {"menu", "account", "notice"};
for (int i = 0; i < 3; i++) { GtkWidget *b = button(icons[i], "hbtn"); g_signal_connect(b, "clicked", G_CALLBACK(popup), (gpointer)kinds[i]); gtk_box_pack_end(GTK_BOX(header), b, FALSE, FALSE, 0); }
const char *icons[] = {"open-menu-symbolic", "avatar-default-symbolic", "preferences-system-notifications-symbolic"}, *kinds[] = {"menu", "account", "notice"};
const char *tips[] = {L("菜单", "Menu"), L("账号", "Account"), L("通知", "Notifications")};
for (int i = 0; i < 3; i++) { GtkWidget *b = icon_button("", icons[i], "hbtn"); gtk_widget_set_tooltip_text(b, tips[i]); g_signal_connect(b, "clicked", G_CALLBACK(popup), (gpointer)kinds[i]); gtk_box_pack_end(GTK_BOX(header), b, FALSE, FALSE, 0); }
gtk_box_pack_start(GTK_BOX(main), header, FALSE, FALSE, 0);
GtkWidget *overlay = gtk_overlay_new();
stack = gtk_stack_new();
+14
View File
@@ -44,6 +44,20 @@ is aimed at the virtual output's region. Needs GTK3.
`UU_PRIVACY_BLOCK_INPUT=0` to keep local input. KWin saves the device flag, so a `privacy-guard`
child restores devices and outputs from the record whenever the host ends, including SIGKILL; the
next start retries too. Devices plugged in during privacy are not blocked.
- 自动开启:`UU_PRIVACY_AUTO=picture`(或 `2`)在第一个桌面控制端连上后自动启用隐私屏保,
`UU_PRIVACY_AUTO=screen-off`(或 `3`)自动关屏;默认关闭。远程协助(访客)的桌面会话同样适用。
控制端自己的请求优先:一次会话里只要客户端发过隐私请求(包括连接刚建立、会话计数还没开始的
那一刻),待执行的自动开启就不再触发;断开后照常恢复。主机不支持或依赖缺失时只记日志,不影响连接。
自动开启后主机会向控制端推送一次 SystemMetrics 和 SystemStateChange,控制端菜单随之更新。支持的主机上,
每次桌面连接也会先推送一次当前状态(关闭时为关闭),这是新增的主动上报。
Auto: `UU_PRIVACY_AUTO=picture` (or `2`) enables picture mode when the first desktop controller
connects; `screen-off` (or `3`) turns the physical screens off. Off by default. Remote-assistance
(guest) desktop sessions are covered too. The viewer's own request wins for that session, including
one that arrives right after the connection opens and before the session counter starts: a pending
auto-enable then does not run, and a disconnect restores as usual. Unsupported hosts or missing
tools only log; the connection is unaffected. After an auto-enable the host pushes SystemMetrics
and SystemStateChange once, so the viewer's menu follows; on supported hosts every desktop
connection also pushes the current state first (off when it is off), which is new outbound traffic.
- 这是尽力而为的遮挡,不是保密边界。/ This is best-effort obscuring, not a confidentiality boundary.
- 恢复记录保存在配置文件旁的 `privacy-power.json`(0600);崩溃后下次启动重新启用记录的物理屏。
若主机无法启动,可在本机终端执行 `kscreen-doctor output.<name>.enable`。
+13
View File
@@ -0,0 +1,13 @@
Linux 复制的文本可直接粘贴到 Windows 控制端。/ Text copied on Linux now pastes in the Windows viewer.
### 修复 / Fixed
- **Linux → Windows 文本剪贴板无法粘贴(#151,感谢 @afwer1231 的定位)**:主机提供 Unicode 文本格式时,格式名改用官方 Windows 端的 `predefined_13`(id 仍为 13)。此前的 `CF_UNICODETEXT` 名字会让 Windows 控制端注册一个同名的自定义格式,文本虽已到达但普通粘贴读不到。Mac 控制端按 id 13 识别,不受影响。
The host now names its Unicode text offer `predefined_13` (id 13), as official Windows peers do. The previous `CF_UNICODETEXT` name made the Windows viewer register a custom format of that name, so the text arrived but normal paste could not read it. The Mac viewer matches by id 13 and is unaffected.
### 验证范围 / Validation
单元测试与 CI;格式名依据官方 Windows/Mac 程序中的字符串对照(推断)。尚未在 Windows 控制端实机验证。
### 下载 / Download
`uu-remote-linux_0.2.46_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.46-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.46`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+17
View File
@@ -0,0 +1,17 @@
官方客户端的设备卡片在未连接时也能显示 Linux 主机的壁纸。/ Device cards in official clients now show the Linux host's wallpaper while disconnected.
### 新增 / Added
- **上报系统壁纸(#152/#153,感谢 @ferstar)**:已登录的图形主机按官方 Windows 被控端的流程获取文件令牌、上传当前壁纸并回报地址,每 60 秒检查一次,内容不变不重复上传。支持 GNOME/Cinnamon、KDE(Plasma 5/6,含壁纸包和主题默认壁纸)、Xfce;其他桌面可用 `UU_WALLPAPER=/绝对路径/图片` 指定(PNG/JPEG/WebP)。访客与无桌面模式不上报。
Signed-in graphical hosts fetch a file token, upload the current wallpaper and report its URL, following the official Windows host. Checks run every 60 seconds; unchanged content is not re-uploaded. Supports GNOME/Cinnamon, KDE (Plasma 5/6, including wallpaper packages and theme defaults) and Xfce; other desktops can set `UU_WALLPAPER=/absolute/path/image`. Guest and headless hosts skip it.
### 隐私 / Privacy
默认会把当前壁纸图片上传到 UU 的文件服务;设置 `UU_WALLPAPER_UPLOAD=0` 可关闭。日志只记录结果和失败阶段。
By default the current wallpaper image is uploaded to UU's file service; set `UU_WALLPAPER_UPLOAD=0` to disable. Logs record only the outcome and failing stage.
### 验证范围 / Validation
单元测试与 CI;贡献者在 KDE 上实机确认官方客户端显示壁纸。GNOME/Cinnamon、Xfce 尚无实机验收;多屏、动态/XML 壁纸不在本次范围。
### 下载 / Download
`uu-remote-linux_0.2.47_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.47-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.47`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+19
View File
@@ -0,0 +1,19 @@
防窥模式可在连接时自动开启,查看端组合键和启动器图标修复,信令失败日志更易诊断。/ Optional auto-enabled privacy screen, viewer modifier and launcher icon fixes, and clearer signaling failure logs.
### 新增 / Added
- **连接时自动开启防窥(#161,感谢 @RiverOnVenus)**:设置 `UU_PRIVACY_AUTO=picture`(隐私屏保)或 `screen-off`(关闭显示屏),第一个桌面控制端连上后自动开启;默认关闭。控制端自己的防窥请求优先,不覆盖已保存的偏好;远程协助会话同样适用。仅 KDE Plasma Wayland(portal)。
Set `UU_PRIVACY_AUTO=picture` or `screen-off` to enable the privacy screen when the first desktop controller connects (off by default). The viewer's own request wins and the saved preference is not overwritten; remote-assistance sessions are covered too. KDE Plasma Wayland (portal) only.
- **Omarchy 壁纸自动发现(#157,感谢 @ferstar)**:Hyprland 下的 Omarchy 自动跟随当前壁纸上报。/ Omarchy on Hyprland reports its current background automatically.
### 修复 / Fixed
- **查看端组合键(#163/#165,感谢 @Zhenqiang-Weng)**:窗口失焦再聚焦后,仍按住的 Shift/Ctrl/Alt/Win(Mac 为 Command)在下一次按键前恢复,不再丢失修饰键。/ The native viewer restores still-held modifiers after a focus change.
- **启动器图标(#158,感谢 @Zhenqiang-Weng)**:改用系统主题符号图标,缺少 emoji 字体时不再显示方框。/ Launcher icons use the system icon theme instead of emoji glyphs.
- **信令连接失败日志(#166)**:记录脱敏后的失败原因(类别或 HTTP 状态码,不含 token 和地址),区分服务端拒绝与网络问题。/ Signaling connection failures now log a sanitized reason (category or HTTP status).
### 验证范围 / Validation
单元测试与 CI;防窥自动开启由贡献者在 KDE Plasma 6 Wayland + iOS 客户端实机验证。查看端修复为合成事件测试,未做 Mac 主机实机验收。
### 下载 / Download
`uu-remote-linux_0.2.48_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.48-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.48`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+47
View File
@@ -0,0 +1,47 @@
# Device-card wallpaper reporting
The official Windows host publishes the system wallpaper for device cards. This is separate from
the Linux viewer's local last-frame cache and does not require capturing desktop windows on disconnect.
## Static protocol evidence
Read-only analysis of the locally installed `GameViewerServer.exe` (SHA-256
`af3a15c3887e06bfa9506971e01cd8ec58f41efe8ac9eb5831e31dae1fc1cef8`) found:
- `ApplicationManager::updateWallpaper`, `getWallpaperPath`, `uploadWallpaper`, and log strings
`wallpaper check`, `wallpaper is not changed, the same md5`, `wallpaper file upload succeeded`.
The source path recorded in the executable is `server_core/business/apps/application_manager.cpp`.
- `0x140ade430`: GET `/api/v1/tool/fp/token?filetype=1`. Response parser `0x140ae3410`
reads `token`, `req_url`, `ttl`, optional `max_size` from API data.
- `0x140aeb8c0`: POST raw file bytes to `req_url`, with `Authorization` set directly to the
file token (no Bearer prefix, multipart wrapper, or account credentials).
- Upload callback `0x140ad1010` requires HTTP 200; parser `0x140ae1550` reads top-level
`fsize`, `url`, `md5`, `mime`. The wallpaper callback `0x1404206c0` uses `url`.
- `0x140b48d80`: POST `/api/v1/device/wallpaper`, JSON `{"wallpaper_url":"<uploaded URL>"}`.
Device response parsers and the official viewer also contain `wallpaper_url`.
Addresses are preferred virtual addresses for that executable only. No official binary, assets,
account data, upload tokens, desktop pictures, or account URLs are included here.
This establishes the wallpaper flow statically; it does not prove that every official client's
last-frame display uses this flow or establish the official timer interval.
## Linux behavior
Signed-in graphical hosts check the configured wallpaper on startup and every 60 seconds, upload
only changed supported image bytes, and retry failures on a later check. Guest and headless hosts skip
reporting. Account renewal replaces the reporting task; stopping the host cancels it. Network work
does not block signaling or alter peer connections. Images are bounded to 10 MiB and the file service's
advertised limit. HTTPS is required and upload redirects are disabled.
GNOME/Unity/Cinnamon use GSettings (GNOME dark preference included); KDE reads the first image
wallpaper containment, including image packages, or the installed look-and-feel's default wallpaper
when no explicit wallpaper is configured; Xfce reads the first `last-image`. Multi-monitor selection, slideshow/XML
wallpapers and unsupported formats are not inferred.
On Hyprland, Omarchy's `omarchy/current/background` link is read from `XDG_STATE_HOME`
(default `~/.local/state`), falling back to the older `XDG_CONFIG_HOME` location
(default `~/.config`). Wallpaper/theme changes are followed on the next check.
Other compositor-specific wallpaper daemons are not inferred.
`UU_WALLPAPER=/absolute/path/image.png` selects a file explicitly; `UU_WALLPAPER_UPLOAD=0` disables
reporting. PNG, JPEG, and WebP are supported. No desktop screenshot fallback is used.
Only success/failure is logged. Paths, hashes, URLs, response bodies and credentials stay out of logs.
+10 -2
View File
@@ -17,6 +17,9 @@ impl TextFormat {
}
fn id(self)->u64{match self{Self::Windows=>UNICODE_TEXT,Self::Mac=>0}}
fn name(self)->&'static str{match self{Self::Windows=>"CF_UNICODETEXT",Self::Mac=>MAC_TEXT}}
/// Name in a format-list offer. Official Windows peers name predefined formats `predefined_<id>`; a plain
/// `CF_UNICODETEXT` makes the Windows viewer register a custom format instead of id 13 (issue #151).
fn offer_name(self)->&'static str{match self{Self::Windows=>WINDOWS_OFFER_NAME,Self::Mac=>MAC_TEXT}}
fn encode(self,text:&str)->Vec<u8>{match self{Self::Windows=>encode_windows(text),Self::Mac=>text.as_bytes().to_vec()}}
fn decode(self,data:&[u8])->Result<String,&'static str>{
match self{
@@ -31,6 +34,7 @@ impl TextFormat {
}
}
}
const WINDOWS_OFFER_NAME:&str="predefined_13";
const BLOCK_BYTES:usize=0x20000;
const MAX_BYTES:usize=MAX_TEXT*2+2;
pub struct ResultMessages {pub messages:Vec<(u32,Vec<u8>)>,pub text:Option<String>}
@@ -96,7 +100,7 @@ impl State{
if text.contains('\0')||encode_windows(&text).len()>MAX_BYTES{return Err("clipboard encoded text exceeds limit");}
self.local=Some(text);
let mut list=Vec::new();
for kind in formats {let mut format=Vec::new();int(1,kind.id(),&mut format);string(2,kind.name(),&mut format);nested(1,&format,&mut list);}
for kind in formats {let mut format=Vec::new();int(1,kind.id(),&mut format);string(2,kind.offer_name(),&mut format);nested(1,&format,&mut list);}
Ok(request(id,1,&list))
}
pub fn request(&mut self,rpc:&[u8],next:&mut impl FnMut()->u64)->Result<ResultMessages,&'static str>{
@@ -210,7 +214,11 @@ mod tests{
let data=bytes(bytes(bytes(&out.messages[1].1,9).unwrap().unwrap(),3).unwrap().unwrap(),3).unwrap().unwrap();
assert_eq!(data,b"hi");
// Host-side offers are unchanged: CF_UNICODETEXT only.
assert_eq!(format_ids(&State::default().offer(1,"hi".into()).unwrap()),vec![13]);
let host_offer=State::default().offer(1,"hi".into()).unwrap();
assert_eq!(format_ids(&host_offer),vec![13]);
let list=bytes(bytes(&host_offer,9).unwrap().unwrap(),1).unwrap().unwrap();
let format=bytes(list,1).unwrap().unwrap();
assert_eq!(text_field(format,2),Ok(WINDOWS_OFFER_NAME));
}
#[test]
fn desktop_clipboard_negotiates_and_buffers_unicode_until_confirmation(){
+6 -2
View File
@@ -5,6 +5,7 @@ mod ws_transport;
mod engine_plugin;
mod doctor;
mod wol;
mod wallpaper;
mod desktop_backend;
mod desktop_mode;
mod desktop_session;
@@ -775,6 +776,7 @@ async fn serve(mut capture: Arc<ScreenCapture>, input: Arc<InputInjector>, shutd
client
};
let mut wallpaper_task = AbortOnDrop(wallpaper::start(auth.clone()));
// One peer per viewer connection (desktop, file transfer, terminal...), keyed by ice_id.
let mut next_capture_type: Option<(u64,crate::session_ice::SessionIce)> = None;
let mut capture_types: HashMap<String, (u64,crate::session_ice::SessionIce)> = HashMap::new();
@@ -812,6 +814,8 @@ async fn serve(mut capture: Arc<ScreenCapture>, input: Arc<InputInjector>, shutd
log::error!("UU login is invalid or expired; a new QR login is required");
let stale = config::read_fresh().ok().flatten().and_then(|f| f.get("token").and_then(|t| t.as_str()).map(str::to_owned));
auth = Arc::new(UUAuthClient::new(login::wait_for_credentials(stale).await));
wallpaper_task.0.abort();
wallpaper_task = AbortOnDrop(wallpaper::start(auth.clone()));
continue;
}
Err(e) => {
@@ -851,8 +855,8 @@ async fn serve(mut capture: Arc<ScreenCapture>, input: Arc<InputInjector>, shutd
Arc::new(cli)
}
Err(e) => {
let _ = e;
log::error!("Failed to connect signaling; retrying in 5s (details omitted)");
// ws_transport errors carry only a category or HTTP status, never the token or URL.
log::error!("Failed to connect signaling; retrying in 5s: {e}");
tokio::time::sleep(tokio::time::Duration::from_secs(5)).await;
continue;
}
+4
View File
@@ -883,6 +883,10 @@ pub fn monitor_key(connector: &str) -> String { permissions::monitor_key(connect
pub fn register(session: &Arc<PortalSession>) {
*ACTIVE.lock().unwrap_or_else(std::sync::PoisonError::into_inner) = Some(Arc::downgrade(session));
}
/// Whether a desktop capture session is registered for monitor/virtual switching.
pub fn available() -> bool {
ACTIVE.lock().unwrap_or_else(std::sync::PoisonError::into_inner).as_ref().and_then(std::sync::Weak::upgrade).is_some()
}
/// Privacy screen: see `Session::set_virtual`. Restoring without a live session is a no-op;
/// failures switching a live session must reach the controller so its recovery record survives.
pub fn set_virtual_active(on: bool) -> Result<(), String> {
+83 -4
View File
@@ -21,6 +21,10 @@ static STATE: Mutex<State> = Mutex::new(State { sessions: 0, active: None });
static ACTIVE: AtomicBool = AtomicBool::new(false);
static PICTURE: AtomicBool = AtomicBool::new(false);
static POINTER: Mutex<Option<[f64; 4]>> = Mutex::new(None);
/// Set by any viewer RPC 7 during the current desktop sessions and cleared when the last one
/// ends. An auto-enable never overrides it, including an RPC that arrives after the connection
/// opens but before `session_started` bumps the counter.
static VIEWER_OVERRIDE: AtomicBool = AtomicBool::new(false);
pub fn supported() -> bool { backend::detect().is_some() }
pub fn active() -> bool { ACTIVE.load(Ordering::Relaxed) }
@@ -80,7 +84,9 @@ fn save_preference(mode: Mode) {
if let Err(e) = crate::system_actions::merge_save(|s| s.privacy_type = Some(mode.wire_type())) { log::warn!("Privacy mode not saved: {e}"); }
}
/// RPC 7: `mode` is None for an unknown privacy_type.
fn set(enable: bool, mode: Option<Mode>) -> Result<(), String> {
fn set(enable: bool, mode: Option<Mode>) -> Result<(), String> { set_inner(enable, mode, true) }
/// `save` records the viewer's preference; the auto-enable path must not overwrite it.
fn set_inner(enable: bool, mode: Option<Mode>, save: bool) -> Result<(), String> {
let mut state = STATE.lock().map_err(|_| "privacy state poisoned")?;
if !enable { return leave(&mut state); }
let mode = mode.ok_or("unsupported privacy type")?;
@@ -89,7 +95,7 @@ fn set(enable: bool, mode: Option<Mode>) -> Result<(), String> {
// A failed rollback keeps the record and the guard: the next request, exit or start retries.
if result.is_err() { if let Err(e) = leave(&mut state) { log::warn!("Privacy rollback failed: {e}"); } }
drop(state);
if result.is_ok() { save_preference(mode); }
if result.is_ok() && save { save_preference(mode); }
result
}
/// Why RPC 7 cannot be served at all; checked before answering.
@@ -119,21 +125,83 @@ pub fn rpc_accept(rpc: &[crate::protocol::WireField]) -> Option<(Vec<u8>, Option
pub const REPORT_ERROR: i32 = -7;
impl Accepted {
pub fn apply(self) -> Result<(), String> {
VIEWER_OVERRIDE.store(true, Ordering::Relaxed);
let result = set(self.enable, self.mode);
if let Err(e) = &result { log::warn!("Privacy request failed: enable={} mode={:?}: {e}", self.enable, self.mode); }
result
}
}
pub fn session_started() { if let Ok(mut s) = STATE.lock() { s.sessions += 1; } }
/// `UU_PRIVACY_AUTO` accepts `picture`/`2` and `screen-off`/`3`; anything else leaves the viewer
/// in charge (and so does the viewer's own RPC 7, which cancels a pending auto-enable).
fn parse_auto(value: &str) -> Option<Mode> {
match value.trim().to_ascii_lowercase().as_str() {
"2" | "picture" => Some(Mode::Picture),
"3" | "screen-off" | "screen_off" => Some(Mode::ScreenOff),
_ => None,
}
}
fn auto_mode() -> Option<Mode> { std::env::var("UU_PRIVACY_AUTO").ok().as_deref().and_then(parse_auto) }
/// Enter the auto mode with the viewer-override check inside the STATE lock, so a request that
/// lands between the caller's check and this lock still wins. Ok(false): the viewer overrode it.
fn auto_set(mode: Mode) -> Result<bool, String> {
let mut state = STATE.lock().map_err(|_| "privacy state poisoned")?;
if VIEWER_OVERRIDE.load(Ordering::Relaxed) { return Ok(false); }
if state.sessions == 0 { return Err("no active desktop session".into()); }
let result = enter(&mut state, mode);
if result.is_err() { if let Err(e) = leave(&mut state) { log::warn!("Privacy rollback failed: {e}"); } }
result.map(|_| true)
}
/// The capture session and the viewer's CONTROL state need a moment after the peer connects;
/// retry while the portal session is still missing, and let the viewer's RPC 7 win if it arrives.
fn auto_enable(mode: Mode) {
for attempt in 1..=5 {
if VIEWER_OVERRIDE.load(Ordering::Relaxed) {
log::info!("Privacy auto: skipped, the viewer already chose a mode");
return;
}
// Not a failure yet: the desktop capture opens its portal session a moment after the peer
// connects, and entering without it would roll back and log a restore for nothing.
if !crate::portal::available() {
log::info!("Privacy auto: waiting for the desktop capture (attempt {attempt})");
std::thread::sleep(std::time::Duration::from_secs(1));
continue;
}
match auto_set(mode) {
Ok(true) => { log::info!("Privacy auto: enabled mode={mode:?} on attempt {attempt}"); return; }
Ok(false) => { log::info!("Privacy auto: skipped, the viewer already chose a mode"); return; }
Err(e) if e.contains("no active desktop session") => return,
Err(e) if e.contains("Portal desktop unavailable") => {
log::info!("Privacy auto: desktop capture not ready (attempt {attempt})");
std::thread::sleep(std::time::Duration::from_secs(1));
}
Err(e) => { log::warn!("Privacy auto failed: {e}"); return; }
}
}
log::warn!("Privacy auto: giving up; the viewer can still enable the privacy screen");
}
pub fn session_started() {
let auto = auto_mode();
let first = STATE.lock().ok().is_some_and(|mut s| { s.sessions += 1; s.sessions == 1 });
let Some(mode) = auto else { return };
if !first { return; }
std::thread::spawn(move || {
std::thread::sleep(std::time::Duration::from_millis(1500));
auto_enable(mode);
});
}
pub fn session_ended() {
if let Ok(mut s) = STATE.lock() {
s.sessions = s.sessions.saturating_sub(1);
if s.sessions == 0 { if let Err(e) = leave(&mut s) { log::warn!("Privacy restore failed: {e}"); } }
if s.sessions == 0 {
VIEWER_OVERRIDE.store(false, Ordering::Relaxed);
if let Err(e) = leave(&mut s) { log::warn!("Privacy restore failed: {e}"); }
}
}
}
pub fn shutdown() {
if let Ok(mut s) = STATE.lock() {
s.sessions = 0;
VIEWER_OVERRIDE.store(false, Ordering::Relaxed);
if let Err(e) = leave(&mut s) { log::warn!("Privacy restore failed: {e}"); }
}
}
@@ -167,6 +235,17 @@ pub fn cover_main(args: &[String]) -> i32 { cover::main(args) }
#[cfg(test)]
mod tests {
#[test]
fn parses_auto_privacy_modes() {
use super::{parse_auto, Mode};
assert_eq!(parse_auto("picture"), Some(Mode::Picture));
assert_eq!(parse_auto("2"), Some(Mode::Picture));
assert_eq!(parse_auto(" screen-off "), Some(Mode::ScreenOff));
assert_eq!(parse_auto("3"), Some(Mode::ScreenOff));
assert_eq!(parse_auto("0"), None);
assert_eq!(parse_auto("off"), None);
assert_eq!(parse_auto(""), None);
}
#[test]
fn enabling_without_a_backend_is_refused_and_reports_off() {
let bytes = [10, 2, 8, 42, 58, 4, 8, 1, 16, 3];
+1 -1
View File
@@ -248,7 +248,7 @@ impl SignalingClient {
let mut req = ws_url
.clone()
.into_client_request()
.map_err(|e| format!("Invalid WS request: {}", e))?;
.map_err(|_| "Invalid WS request".to_string())?;
req.headers_mut().insert(
"X-NRD-AUTH",
+85 -1
View File
@@ -345,7 +345,13 @@ fn translate_actions(events:impl IntoIterator<Item=Event>,input:&mut Input,viewp
if !repeat{*files=true;messages.extend(input.release_all());}None
},
_ if !*focused || !input.enabled()=>None,
Event::KeyDown{scancode:Some(s),repeat:false,..}=>input.key(s as i32,true),
Event::KeyDown{scancode:Some(s),keymod,repeat:false,..}=>{
// FocusLost releases remote keys, while a modifier may remain physically held.
// SDL_Keysym.mod is the event-time snapshot: restore it before the next key,
// without querying the final state of a whole polled batch or typing text.
if !(224..=231).contains(&(s as i32)){messages.extend(sync_modifiers(input,keymod));}
input.key(s as i32,true)
},
Event::KeyUp{scancode:Some(s),..}=>input.key(s as i32,false),
Event::MouseMotion{x,y,..}=>viewport.motion(x as f64,y as f64),
Event::MouseButtonDown{mouse_btn,..}=>button(mouse_btn).and_then(|b|input.button(b,true)),
@@ -366,6 +372,18 @@ fn translate_actions(events:impl IntoIterator<Item=Event>,input:&mut Input,viewp
} (quit,messages)
}
fn sync_modifiers(input:&mut Input,keymod:sdl2::keyboard::Mod)->Vec<serde_json::Value>{
use sdl2::keyboard::Mod as M;
let modifiers=[(224,M::LCTRLMOD),(225,M::LSHIFTMOD),(226,M::LALTMOD),(227,M::LGUIMOD),
(228,M::RCTRLMOD),(229,M::RSHIFTMOD),(230,M::RALTMOD),(231,M::RGUIMOD)];
let mut out=Vec::new();
// Release stale modifiers before pressing new ones. Input deduplicates transitions.
// Caps/Num/Scroll Lock and MODE are not physical held modifiers.
for down in [false,true]{for (scan,flag) in modifiers{
if keymod.contains(flag)==down{out.extend(input.key(scan,down));}
}}out
}
fn needs_redraw(event:&Event)->bool{
matches!(event,Event::Window{win_event:WindowEvent::SizeChanged(..)|WindowEvent::Resized(..)|WindowEvent::Exposed|WindowEvent::Maximized|WindowEvent::Restored,..})
}
@@ -709,6 +727,72 @@ async fn pump_type_job(job: &mut TypeJob, session: &mut Session, window: &mut Wi
}
}
#[cfg(test)] mod modifier_tests {
use super::*;
use sdl2::keyboard::{Scancode as S,Mod as M};
fn key(scan:S,down:bool,mods:M)->Event{
if down{Event::KeyDown{timestamp:0,window_id:1,keycode:None,scancode:Some(scan),keymod:mods,repeat:false}}
else{Event::KeyUp{timestamp:0,window_id:1,keycode:None,scancode:Some(scan),keymod:mods,repeat:false}}
}
fn focus(event:WindowEvent)->Event{Event::Window{timestamp:0,window_id:1,win_event:event}}
fn send(input:&mut Input,focused:&mut bool,events:impl IntoIterator<Item=Event>)->Vec<serde_json::Value>{
translate(events,input,Viewport::fit((800,600),(1920,1080)),focused).1
}
fn codes(messages:&[serde_json::Value])->Vec<(&str,i64)>{
messages.iter().map(|m|(m["action"].as_str().unwrap(),m["key"].as_i64().unwrap())).collect()
}
#[test] fn held_left_and_right_modifiers_recover_after_focus_return(){
for mac in [false,true]{for (scan,flag) in [(S::LCtrl,M::LCTRLMOD),(S::LShift,M::LSHIFTMOD),
(S::LAlt,M::LALTMOD),(S::LGui,M::LGUIMOD),(S::RCtrl,M::RCTRLMOD),(S::RShift,M::RSHIFTMOD),
(S::RAlt,M::RALTMOD),(S::RGui,M::RGUIMOD)]{
let code=|scan:S|i64::from(if mac{super::super::input::mac_keycode(scan as i32)}else{super::super::input::windows_vk(scan as i32)}.unwrap());
let mut input=Input::default();input.set_mac(mac);let mut focused=true;
let out=send(&mut input,&mut focused,[key(scan,true,flag),focus(WindowEvent::FocusLost)]);
assert_eq!(codes(&out),vec![("kbd_press",code(scan)),("kbd_release",code(scan))]);
assert!(!focused);
let out=send(&mut input,&mut focused,[focus(WindowEvent::FocusGained),key(S::Num2,true,flag),
key(S::Num2,false,flag),key(scan,false,M::NOMOD)]);
assert_eq!(codes(&out),vec![("kbd_press",code(scan)),("kbd_press",code(S::Num2)),
("kbd_release",code(S::Num2)),("kbd_release",code(scan))]);
assert!(input.release_all().is_empty());
}}
}
#[test] fn combined_snapshot_releases_stale_modifiers_before_new_chord(){
let mut input=Input::default();input.set_mac(true);let mut focused=true;
send(&mut input,&mut focused,[key(S::LShift,true,M::LSHIFTMOD),key(S::RGui,true,M::LSHIFTMOD|M::RGUIMOD)]);
let mods=M::RSHIFTMOD|M::LCTRLMOD|M::LALTMOD;
let out=send(&mut input,&mut focused,[key(S::A,true,mods),key(S::A,false,mods),
key(S::B,true,M::NOMOD),key(S::B,false,M::NOMOD)]);
assert_eq!(codes(&out),vec![("kbd_release",56),("kbd_release",54),
("kbd_press",59),("kbd_press",58),("kbd_press",60),("kbd_press",0),("kbd_release",0),
("kbd_release",59),("kbd_release",58),("kbd_release",60),("kbd_press",11),("kbd_release",11)]);
assert!(input.release_all().is_empty());
}
#[test] fn complete_chords_and_overlapping_letters_are_not_duplicated(){
let mut input=Input::default();input.set_mac(true);let mut focused=true;
let mods=M::LSHIFTMOD|M::RSHIFTMOD;
let out=send(&mut input,&mut focused,[key(S::LShift,true,M::LSHIFTMOD),key(S::RShift,true,mods),
key(S::A,true,mods),key(S::B,true,mods),key(S::A,false,mods),key(S::LShift,false,M::RSHIFTMOD),
key(S::B,false,M::RSHIFTMOD),key(S::RShift,false,M::NOMOD)]);
assert_eq!(codes(&out),vec![("kbd_press",56),("kbd_press",60),("kbd_press",0),("kbd_press",11),
("kbd_release",0),("kbd_release",56),("kbd_release",11),("kbd_release",60)]);
assert!(input.release_all().is_empty());
}
#[test] fn snapshot_is_event_time_and_does_not_create_lock_or_view_only_keys(){
let mut input=Input::default();let mut focused=true;
let out=send(&mut input,&mut focused,[key(S::Num2,true,M::LSHIFTMOD|M::CAPSMOD|M::NUMMOD|M::MODEMOD),
key(S::Num2,false,M::LSHIFTMOD),key(S::A,true,M::NOMOD),key(S::A,false,M::NOMOD)]);
assert_eq!(codes(&out),vec![("kbd_press",0xa0),("kbd_press",0x32),("kbd_release",0x32),
("kbd_release",0xa0),("kbd_press",0x41),("kbd_release",0x41)]);
for watch in [false,true]{
let mut input=Input::new(watch);let mut focused=false;
assert!(send(&mut input,&mut focused,[key(S::A,true,M::LSHIFTMOD)]).is_empty());
if watch{assert!(send(&mut input,&mut focused,[focus(WindowEvent::FocusGained),key(S::A,true,M::LSHIFTMOD)]).is_empty());}
assert!(input.release_all().is_empty());
}
}
}
#[cfg(test)] mod tests {
use super::*;
#[cfg_attr(target_os="macos",ignore)]
+473
View File
@@ -0,0 +1,473 @@
//! Official device-card background reporting. Protocol evidence: docs/wallpaper-protocol.md.
use std::{path::PathBuf, sync::Arc, time::Duration};
use sha2::{Digest, Sha256};
use tokio::io::AsyncReadExt;
use crate::auth::UUAuthClient;
const LIMIT: usize = 10 * 1024 * 1024;
const TIMEOUT: Duration = Duration::from_secs(20);
pub fn start(auth: Arc<UUAuthClient>) -> tokio::task::AbortHandle {
tokio::spawn(async move {
if auth.creds.user_id.is_empty() || crate::desktop_backend::headless()
|| std::env::var("UU_WALLPAPER_UPLOAD").as_deref() == Ok("0") { return; }
let mut previous = None;
loop {
if let Some(path) = source().await {
match read_image(&path).await {
Ok(image) => {
let hash = Sha256::digest(&image).to_vec();
if previous.as_ref() != Some(&hash) {
match publish(&auth, image).await {
Ok(()) => { previous = Some(hash); log::info!("Device wallpaper synchronized"); }
Err(stage) => log::warn!("Device wallpaper synchronization failed: stage={stage}; will retry"),
}
}
}
Err(()) => log::debug!("Device wallpaper unavailable or unsupported"),
}
}
tokio::time::sleep(Duration::from_secs(60)).await;
}
}).abort_handle()
}
async fn command(program: &str, args: &[&str]) -> Option<String> {
let output = tokio::time::timeout(Duration::from_secs(3), tokio::process::Command::new(program)
.args(args).kill_on_drop(true).output()).await.ok()?.ok()?;
output.status.success().then(|| String::from_utf8(output.stdout).ok()).flatten()
}
async fn kde_config(programs: &[&str], args: &[&str]) -> Option<String> {
for program in programs {
if let Some(value) = command(program, args).await { return Some(value); }
}
None
}
async fn source() -> Option<PathBuf> {
if let Some(path) = std::env::var_os("UU_WALLPAPER") {
let path = PathBuf::from(path); return path.is_absolute().then_some(path);
}
let desktop = std::env::var("XDG_CURRENT_DESKTOP").unwrap_or_default().to_lowercase();
if desktop.split(':').any(|name| name == "hyprland") {
let home = std::env::var_os("HOME").map(PathBuf::from);
let xdg = |name, fallback| std::env::var_os(name).map(PathBuf::from)
.filter(|p| p.is_absolute()).or_else(|| home.as_ref().map(|p| p.join(fallback)));
return omarchy_background(xdg("XDG_STATE_HOME", ".local/state").as_deref(),
xdg("XDG_CONFIG_HOME", ".config").as_deref()).await;
}
if desktop.contains("gnome") || desktop.contains("unity") || desktop.contains("cinnamon") {
let schema = if desktop.contains("cinnamon") { "org.cinnamon.desktop.background" } else { "org.gnome.desktop.background" };
if schema == "org.gnome.desktop.background" && command("gsettings", &["get", "org.gnome.desktop.interface", "color-scheme"])
.await.is_some_and(|v| v.contains("prefer-dark")) {
if let Some(path) = command("gsettings", &["get", schema, "picture-uri-dark"]).await.and_then(|v| gsettings_path(&v)) { return Some(path); }
}
return command("gsettings", &["get", schema, "picture-uri"]).await.and_then(|v| gsettings_path(&v));
}
if desktop.contains("kde") {
let config = std::env::var_os("XDG_CONFIG_HOME").map(PathBuf::from)
.filter(|p| p.is_absolute()).or_else(|| std::env::var_os("HOME").map(|h| PathBuf::from(h).join(".config")))?;
let text = tokio::fs::read_to_string(config.join("plasma-org.kde.plasma.desktop-appletsrc")).await.unwrap_or_default();
if let Some(path) = kde_image(&text) { return package_image(path).await; }
// Plasma omits Image for the look-and-feel's default wallpaper.
if !kde_default_allowed(&text) { return None; }
let readers = ["kreadconfig6", "kreadconfig5"];
let theme = kde_config(&readers, &["--file", "kdeglobals", "--group", "KDE", "--key", "LookAndFeelPackage"])
.await.unwrap_or_default();
let theme = if theme.trim().is_empty() { "org.kde.breeze.desktop" } else { theme.trim() };
if theme.contains('/') || theme.contains("..") { return None; }
let defaults = format!("/usr/share/plasma/look-and-feel/{theme}/contents/defaults");
let image = kde_config(&readers, &["--file", &defaults, "--group", "Wallpaper", "--key", "Image"]).await?;
let image = image.trim();
if image.is_empty() || image.contains('/') || image.contains("..") { return None; }
return package_image(PathBuf::from("/usr/share/wallpapers").join(image)).await;
}
if desktop.contains("xfce") {
let text = command("xfconf-query", &["-c", "xfce4-desktop", "-lv"]).await?;
for line in text.lines() {
if let Some((key, value)) = line.trim().split_once(char::is_whitespace) {
if key.ends_with("/last-image") { if let Some(path) = local_path(value) { return Some(path); } }
}
}
}
None
}
// Omarchy maintains this link when changing wallpaper/theme. Prefer its current
// XDG state location, while supporting older installations using XDG config.
async fn omarchy_background(state: Option<&std::path::Path>, config: Option<&std::path::Path>) -> Option<PathBuf> {
for root in [state, config].into_iter().flatten() {
let path = root.join("omarchy/current/background");
if tokio::fs::metadata(&path).await.is_ok_and(|meta| meta.is_file()) { return Some(path); }
}
None
}
async fn package_image(path: PathBuf) -> Option<PathBuf> {
if tokio::fs::metadata(&path).await.ok()?.is_file() { return Some(path); }
let mut entries = tokio::fs::read_dir(path.join("contents/images")).await.ok()?;
let mut candidates = Vec::new();
while let Some(entry) = entries.next_entry().await.ok()? {
if !tokio::fs::metadata(entry.path()).await.is_ok_and(|meta| meta.is_file()) { continue; }
let path = entry.path();
let Some((w,h)) = path.file_stem().and_then(|s| s.to_str()).and_then(|s| s.split_once('x'))
.and_then(|(w,h)| Some((w.parse::<u32>().ok()?,h.parse::<u32>().ok()?))) else { continue; };
candidates.push(((w < h, u64::from(w) * u64::from(h)), path));
}
candidates.sort_by_key(|(score, _)| *score);
candidates.into_iter().next().map(|(_, path)| path)
}
fn kde_image(text: &str) -> Option<PathBuf> {
let plugins = kde_plugins(text);
let mut image_section = false;
for line in text.lines().map(str::trim) {
if line.starts_with('[') {
image_section = line.strip_prefix("[Containments][").and_then(|s| s.split_once(']'))
.is_some_and(|(id, section)| section == "[Wallpaper][org.kde.image][General]"
&& plugins.get(id).map_or(true, |plugin| *plugin == KdeWallpaper::Image));
}
if image_section { if let Some(value) = line.strip_prefix("Image=") { if let Some(path) = local_path(value) { return Some(path); } } }
}
None
}
#[derive(Clone, Copy, PartialEq, Eq)]
enum KdeWallpaper { Image, Unsupported }
fn kde_plugins(text: &str) -> std::collections::HashMap<&str, KdeWallpaper> {
let mut containment = None;
let mut plugins = std::collections::HashMap::new();
let mut panels = Vec::new();
for line in text.lines().map(str::trim) {
if line.starts_with('[') {
containment = line.strip_prefix("[Containments][").and_then(|s| s.split_once(']'))
.filter(|(_, section)| section.is_empty()).map(|(id, _)| id);
}
if let Some(id) = containment {
plugins.entry(id).or_insert(KdeWallpaper::Image);
if line.strip_prefix("plugin=").is_some_and(|plugin| plugin.trim() == "org.kde.panel") { panels.push(id); }
if let Some(plugin) = line.strip_prefix("wallpaperplugin=") {
plugins.insert(id, if plugin.trim() == "org.kde.image" { KdeWallpaper::Image } else { KdeWallpaper::Unsupported });
}
}
}
// Panels can keep an image wallpaper setting, but do not supply a desktop background.
for id in panels { plugins.insert(id, KdeWallpaper::Unsupported); }
plugins
}
fn kde_default_allowed(text: &str) -> bool {
let plugins = kde_plugins(text);
if !plugins.is_empty() { return plugins.values().any(|plugin| *plugin == KdeWallpaper::Image); }
!text.contains("[Wallpaper][") || text.contains("[Wallpaper][org.kde.image]")
}
fn gsettings_path(value: &str) -> Option<PathBuf> {
// gsettings prints a GVariant string, with either quote style and C/Unicode escapes.
// https://docs.gtk.org/glib/gvariant-text-format.html#strings
let mut chars = value.trim().chars();
let quote = chars.next()?;
if quote != '\'' && quote != '"' { return None; }
let mut decoded = String::new();
while let Some(ch) = chars.next() {
if ch == quote { return chars.as_str().is_empty().then(|| local_path(&decoded)).flatten(); }
if ch != '\\' { decoded.push(ch); continue; }
let escaped = chars.next()?;
decoded.push(match escaped {
'a' => '\x07', 'b' => '\x08', 'f' => '\x0c', 'n' => '\n',
'r' => '\r', 't' => '\t', 'v' => '\x0b', '\\' => '\\', '\'' => '\'', '"' => '"',
'u' | 'U' => {
let mut code = 0u32;
for _ in 0..if escaped == 'u' { 4 } else { 8 } { code = u32::checked_add(code.checked_mul(16)?, chars.next()?.to_digit(16)?)?; }
char::from_u32(code).filter(|c| *c != '\0')?
}
'\n' => continue,
_ => escaped,
});
}
None
}
fn local_path(value: &str) -> Option<PathBuf> {
let value = value.trim();
let path = if value.starts_with("file:") {
let url = reqwest::Url::parse(value).ok()?;
if url.query().is_some() || url.fragment().is_some() { return None; }
url.to_file_path().ok()?
} else { PathBuf::from(value) };
path.is_absolute().then_some(path)
}
async fn read_image(path: &std::path::Path) -> Result<Vec<u8>, ()> {
if !tokio::fs::metadata(path).await.map_err(|_| ())?.is_file() { return Err(()); }
let file = tokio::fs::File::open(path).await.map_err(|_| ())?;
if !file.metadata().await.map_err(|_| ())?.is_file() { return Err(()); }
let mut image = Vec::new();
file.take((LIMIT + 1) as u64).read_to_end(&mut image).await.map_err(|_| ())?;
if image.len() > LIMIT || image_type(&image).is_none() { return Err(()); }
Ok(image)
}
fn image_type(image: &[u8]) -> Option<&'static str> {
if image.starts_with(b"\x89PNG\r\n\x1a\n") { Some("image/png") }
else if image.starts_with(b"\xff\xd8\xff") { Some("image/jpeg") }
else if image.starts_with(b"RIFF") && image.get(8..12) == Some(b"WEBP") { Some("image/webp") }
else { None }
}
fn api_data(status: u16, body: &serde_json::Value) -> Result<&serde_json::Value, ()> {
if status != 200 || body.get("code").and_then(|v| v.as_i64()) != Some(0) { return Err(()); }
body.get("data").ok_or(())
}
async fn publish(auth: &UUAuthClient, image: Vec<u8>) -> Result<(), &'static str> {
let http = crate::auth::http_client_builder().redirect(reqwest::redirect::Policy::none()).build().map_err(|_| "http-client")?;
publish_to(auth, image, crate::auth::BASE_URL, &http).await
}
async fn json(request: reqwest::RequestBuilder) -> Result<(u16, serde_json::Value), ()> {
let mut response = request.timeout(TIMEOUT).send().await.map_err(|_| ())?;
let status = response.status().as_u16();
let mut bytes = Vec::new();
while let Some(chunk) = response.chunk().await.map_err(|_| ())? {
if bytes.len() + chunk.len() > 65536 { return Err(()); }
bytes.extend_from_slice(&chunk);
}
Ok((status, serde_json::from_slice(&bytes).map_err(|_| ())?))
}
async fn publish_to(auth: &UUAuthClient, image: Vec<u8>, base: &str, http: &reqwest::Client) -> Result<(), &'static str> {
let path = "/api/v1/tool/fp/token?filetype=1";
let result = json(http.get(format!("{base}{path}")).headers(auth.build_headers("GET", path, ""))).await.map_err(|_| "token-request")?;
let data = api_data(result.0, &result.1).map_err(|_| "token-response")?;
let token = data.get("token").and_then(|v| v.as_str()).filter(|v| !v.is_empty()).ok_or("file-token")?;
let url = data.get("req_url").and_then(|v| v.as_str()).ok_or("upload-url")?;
let url = https_url(url).map_err(|_| "upload-url")?;
let max = data.get("max_size").and_then(|v| v.as_u64()).filter(|n| *n > 0).unwrap_or(LIMIT as u64);
if image.len() as u64 > max { return Err("file-size"); }
// Filepicker takes raw bytes and its own Authorization value, never account headers.
let response = json(http.post(url).header("Authorization", token)
.header("Content-Type", image_type(&image).ok_or("file-type")?).body(image)
).await.map_err(|_| "file-upload")?;
if response.0 != 200 { return Err("file-upload-status"); }
let url = response.1.get("url").and_then(|v| v.as_str()).ok_or("file-response")?;
https_url(url).map_err(|_| "file-response-url")?;
let path = "/api/v1/device/wallpaper";
let body = serde_json::json!({"wallpaper_url": url}).to_string();
let result = json(http.post(format!("{base}{path}")).headers(auth.build_headers("POST", path, &body)).body(body)).await.map_err(|_| "report-request")?;
if result.0 != 200 || result.1.get("code").and_then(|v| v.as_i64()) != Some(0) { return Err("report-response"); }
Ok(())
}
fn https_url(value: &str) -> Result<reqwest::Url, ()> {
let url = reqwest::Url::parse(value).map_err(|_| ())?;
if url.scheme() != "https" || url.host_str().is_none() || !url.username().is_empty() || url.password().is_some() { return Err(()); }
Ok(url)
}
#[cfg(test)]
mod tests {
use super::*;
use tokio::io::AsyncWriteExt;
#[tokio::test]
async fn kde_config_uses_plasma5_when_plasma6_reader_is_unavailable() {
use std::os::unix::fs::PermissionsExt;
let root = std::env::temp_dir().join(format!("uu-kreadconfig-test-{}-{}", std::process::id(), rand::random::<u64>()));
std::fs::create_dir(&root).unwrap();
let five = root.join("kreadconfig5"); let six = root.join("kreadconfig6");
std::fs::write(&five, "#!/bin/sh\ncase \"$*\" in *LookAndFeelPackage*) echo org.kde.breeze.desktop;; *Image*) echo Next;; esac\n").unwrap();
std::fs::set_permissions(&five, std::fs::Permissions::from_mode(0o700)).unwrap();
let readers = [six.to_str().unwrap(), five.to_str().unwrap()];
assert_eq!(kde_config(&readers, &["--key", "LookAndFeelPackage"]).await.as_deref(), Some("org.kde.breeze.desktop\n"));
assert_eq!(kde_config(&readers, &["--key", "Image"]).await.as_deref(), Some("Next\n"));
std::fs::write(&six, "#!/bin/sh\necho Plasma6\n").unwrap();
std::fs::set_permissions(&six, std::fs::Permissions::from_mode(0o700)).unwrap();
assert_eq!(kde_config(&readers, &["--key", "Image"]).await.as_deref(), Some("Plasma6\n"));
std::fs::remove_dir_all(root).unwrap();
}
#[tokio::test]
async fn omarchy_follows_current_wallpaper_links_and_supports_legacy_location() {
use std::os::unix::fs::symlink;
let root = std::env::temp_dir().join(format!("uu-omarchy-{}-{}", std::process::id(), rand::random::<u64>()));
let state = root.join("custom-state");
let config = root.join("custom-config");
for dir in [&state, &config] { std::fs::create_dir_all(dir.join("omarchy/current")).unwrap(); }
let current = state.join("omarchy/current/background");
let legacy = config.join("omarchy/current/background");
let first = root.join("first.png");
let second = root.join("second.jpg");
std::fs::write(&first, b"\x89PNG\r\n\x1a\n").unwrap();
std::fs::write(&second, b"\xff\xd8\xff").unwrap();
symlink(&second, &legacy).unwrap();
let detect = || omarchy_background(Some(&state), Some(&config));
assert_eq!(detect().await, Some(legacy.clone()));
symlink(&first, &current).unwrap();
assert_eq!(detect().await, Some(current.clone()));
assert_eq!(read_image(&detect().await.unwrap()).await.unwrap(), std::fs::read(&first).unwrap());
std::fs::remove_file(&current).unwrap(); symlink(&second, &current).unwrap();
assert_eq!(read_image(&detect().await.unwrap()).await.unwrap(), std::fs::read(&second).unwrap());
std::fs::remove_file(&current).unwrap(); symlink(root.join("missing"), &current).unwrap();
assert_eq!(detect().await, Some(legacy.clone()));
std::fs::remove_file(&current).unwrap(); symlink(&root, &current).unwrap();
assert_eq!(detect().await, Some(legacy.clone()));
std::fs::remove_file(&legacy).unwrap();
assert_eq!(detect().await, None);
std::fs::remove_dir_all(root).unwrap();
}
#[tokio::test]
async fn kde_packages_select_landscape_and_image_reads_are_bounded() {
let root = std::env::temp_dir().join(format!("uu-wallpaper-test-{}-{}", std::process::id(), rand::random::<u64>()));
let images = root.join("contents/images");
std::fs::create_dir_all(&images).unwrap();
for name in ["1440x2960.png", "5120x2880.png", "7680x2160.png"] {
std::fs::write(images.join(name), b"\x89PNG\r\n\x1a\n").unwrap();
}
let image = package_image(root.clone()).await.unwrap();
assert_eq!(image.file_name().unwrap(), "5120x2880.png");
assert_eq!(package_image(image.clone()).await, Some(image.clone()));
assert!(read_image(&image).await.is_ok());
std::fs::write(&image, b"private text is not an image").unwrap();
assert!(read_image(&image).await.is_err());
std::fs::OpenOptions::new().write(true).open(&image).unwrap().set_len((LIMIT + 1) as u64).unwrap();
assert!(read_image(&image).await.is_err());
assert!(read_image(&root).await.is_err());
std::fs::remove_dir_all(root).unwrap();
}
#[tokio::test]
async fn kde_packages_follow_image_symlinks_and_skip_invalid_targets() {
use std::os::unix::fs::symlink;
let root = std::env::temp_dir().join(format!("uu-wallpaper-links-test-{}-{}", std::process::id(), rand::random::<u64>()));
let images = root.join("contents/images");
std::fs::create_dir_all(&images).unwrap();
let target = root.join("shared.png");
std::fs::write(&target, b"\x89PNG\r\n\x1a\n").unwrap();
let image = images.join("1920x1080.png");
symlink("../../shared.png", &image).unwrap();
symlink("../../missing.png", images.join("640x480.png")).unwrap();
symlink(&root, images.join("800x600.png")).unwrap();
assert_eq!(package_image(root.clone()).await, Some(image.clone()));
assert!(read_image(&image).await.is_ok());
std::fs::remove_dir_all(root).unwrap();
}
#[tokio::test]
async fn reporting_protocol_keeps_file_token_separate_and_stops_on_failures() {
use tokio_rustls::{rustls, TlsAcceptor};
use rustls::pki_types::{CertificateDer, PrivateKeyDer, PrivatePkcs8KeyDer};
let cert = rcgen::generate_simple_self_signed(vec!["localhost".into()]).unwrap();
let der = cert.serialize_der().unwrap();
let http = reqwest::Client::builder().no_proxy().redirect(reqwest::redirect::Policy::none())
.add_root_certificate(reqwest::Certificate::from_der(&der).unwrap()).build().unwrap();
let config = rustls::ServerConfig::builder_with_provider(Arc::new(rustls::crypto::ring::default_provider()))
.with_safe_default_protocol_versions().unwrap().with_no_client_auth()
.with_single_cert(vec![CertificateDer::from(der)], PrivateKeyDer::Pkcs8(
PrivatePkcs8KeyDer::from(cert.serialize_private_key_der()))).unwrap();
let acceptor = TlsAcceptor::from(Arc::new(config));
let auth = UUAuthClient::new(crate::auth::Credentials {
token: "fixture-account-token".into(), csrf: "fixture-csrf".into(),
sign_key: "fixture-key".into(), ..Default::default()
});
for scenario in ["success", "token-failed", "too-large", "upload-failed", "report-failed"] {
let listener = tokio::net::TcpListener::bind("127.0.0.1:0").await.unwrap();
let base = format!("https://localhost:{}", listener.local_addr().unwrap().port());
let server_base = base.clone(); let acceptor = acceptor.clone();
let steps = match scenario { "token-failed" | "too-large" => 1, "upload-failed" => 2, _ => 3 };
let server = tokio::spawn(async move {
for step in 0..steps {
let (socket, _) = listener.accept().await.unwrap();
let mut tls = acceptor.accept(socket).await.unwrap();
let mut bytes = Vec::new(); let mut byte = [0u8; 1];
while !bytes.ends_with(b"\r\n\r\n") {
tls.read_exact(&mut byte).await.unwrap(); bytes.push(byte[0]); assert!(bytes.len() < 16384);
}
let headers = String::from_utf8(bytes).unwrap().to_lowercase();
let length: usize = headers.lines().find_map(|l| l.strip_prefix("content-length:")
.and_then(|s| s.trim().parse().ok())).unwrap_or(0);
let mut body = vec![0; length]; tls.read_exact(&mut body).await.unwrap();
let (status, reply) = match step {
0 => {
assert!(headers.starts_with("get /api/v1/tool/fp/token?filetype=1 "));
assert!(headers.contains("authorization: bearer fixture-account-token\r\n"));
assert!(headers.contains("x-param-sign:")); assert!(body.is_empty());
(200, serde_json::json!({"code":if scenario=="token-failed" {1120}else{0},
"data":{"token":"fixture-file-token","req_url":format!("{server_base}/upload"),"ttl":60,
"max_size":if scenario=="too-large" {1}else{1024}}}))
}
1 => {
assert!(headers.starts_with("post /upload "));
assert!(headers.contains("authorization: fixture-file-token\r\n"));
for secret in ["fixture-account-token", "fixture-csrf", "cookie:", "x-param-"] { assert!(!headers.contains(secret)); }
assert_eq!(body, b"\x89PNG\r\n\x1a\n");
(if scenario=="upload-failed" {500}else{200}, serde_json::json!({"url":"https://example.invalid/wallpaper.png","fsize":8,"md5":"fixture","mime":"image/png"}))
}
_ => {
assert!(headers.starts_with("post /api/v1/device/wallpaper "));
assert!(headers.contains("authorization: bearer fixture-account-token\r\n"));
assert!(!headers.contains("fixture-file-token"));
assert_eq!(serde_json::from_slice::<serde_json::Value>(&body).unwrap(), serde_json::json!({"wallpaper_url":"https://example.invalid/wallpaper.png"}));
(200, serde_json::json!({"code":if scenario=="report-failed" {1120}else{0}}))
}
};
let reply = reply.to_string();
tls.write_all(format!("HTTP/1.1 {status} Fixture\r\nContent-Length: {}\r\nConnection: close\r\n\r\n{reply}", reply.len()).as_bytes()).await.unwrap();
tls.shutdown().await.unwrap();
}
});
let result = tokio::time::timeout(Duration::from_secs(5), publish_to(&auth, b"\x89PNG\r\n\x1a\n".to_vec(), &base, &http)).await.unwrap();
assert_eq!(result.is_ok(), scenario == "success", "{scenario}");
tokio::time::timeout(Duration::from_secs(5), server).await.unwrap().unwrap();
}
}
#[test] fn wallpaper_sources_are_local_and_scoped() {
assert_eq!(gsettings_path("'file:///usr/share/a%20b.png'"), Some(PathBuf::from("/usr/share/a b.png")));
for value in ["", "relative.png", "https://example.com/a.png", "file://remote/a.png", "file:///tmp/a.png?token=secret"] { assert!(local_path(value).is_none()); }
assert_eq!(kde_image("[Other]\nImage=/wrong.png\n[Containments][2][Wallpaper][org.kde.image][General]\nImage=file:///right.png"), Some(PathBuf::from("/right.png")));
}
#[test] fn gsettings_decodes_quotes_backslashes_and_unicode() {
assert_eq!(gsettings_path("\"file:///tmp/it's.png\""), Some(PathBuf::from("/tmp/it's.png")));
assert_eq!(gsettings_path(r#"'file:///tmp/it\'s.png'"#), Some(PathBuf::from("/tmp/it's.png")));
assert_eq!(gsettings_path(r#"'/tmp/a\\b\t\u00e9\U0001f600.png'"#), Some(PathBuf::from("/tmp/a\\b\té😀.png")));
for value in ["'unterminated", "'/tmp/a' trailing", r#"'/tmp/\uD800'"#, r#"'/tmp/\Uffffffff'"#] { assert!(gsettings_path(value).is_none()); }
assert_eq!(gsettings_path(r#"'/tmp/\x41'"#), Some(PathBuf::from("/tmp/x41")));
assert_eq!(local_path("/tmp/it's.png"), Some(PathBuf::from("/tmp/it's.png")));
}
#[test] fn kde_default_survives_saved_image_settings_but_not_other_plugins() {
let image = "[Containments][1]\nwallpaperplugin=org.kde.image\n[Containments][1][Wallpaper][org.kde.image][General]\nFillMode=1\n";
assert!(kde_image(image).is_none()); assert!(kde_default_allowed(image));
assert!(kde_default_allowed("[Containments][1][Wallpaper][org.kde.image][General]\nFillMode=1"));
assert!(kde_default_allowed(""));
assert!(!kde_default_allowed(&image.replace("wallpaperplugin=org.kde.image", "wallpaperplugin=org.kde.slideshow")));
assert!(!kde_default_allowed("[Containments][1][Wallpaper][org.kde.slideshow][General]\nSlidePaths=/tmp"));
}
#[test] fn kde_stored_images_belong_to_the_same_active_image_containment() {
let stale = "[Containments][1]\nwallpaperplugin=org.kde.slideshow\n[Containments][1][Wallpaper][org.kde.image][General]\nImage=/tmp/previous.png\n";
assert!(kde_image(stale).is_none());
assert!(!kde_default_allowed(stale));
let mixed = format!("{stale}[Containments][2]\nwallpaperplugin=org.kde.image\n[Containments][2][Wallpaper][org.kde.image][General]\nImage=/tmp/current.png\n");
assert_eq!(kde_image(&mixed), Some(PathBuf::from("/tmp/current.png")));
assert_eq!(kde_image(&stale.replace("org.kde.slideshow", "org.kde.image")), Some(PathBuf::from("/tmp/previous.png")));
}
#[test] fn kde_panels_do_not_enable_default_wallpaper_or_supply_saved_images() {
let panel = "[Containments][2]\nwallpaperplugin=org.kde.image\nplugin=org.kde.panel\n[Containments][2][Wallpaper][org.kde.image][General]\nImage=/tmp/panel.png\n";
let slideshow = "[Containments][1]\nplugin=org.kde.plasma.folder\nwallpaperplugin=org.kde.slideshow\n";
assert!(!kde_default_allowed(slideshow));
assert!(!kde_default_allowed(&format!("{slideshow}{panel}")));
assert!(kde_image(&format!("{slideshow}{panel}")).is_none());
assert!(!kde_default_allowed(panel));
let desktop = "[Containments][1]\nplugin=org.kde.plasma.folder\n";
assert!(kde_default_allowed(&format!("{desktop}{panel}")));
}
#[test] fn only_supported_image_files_are_uploaded() {
assert_eq!(image_type(b"\x89PNG\r\n\x1a\n"), Some("image/png"));
assert_eq!(image_type(b"\xff\xd8\xff"), Some("image/jpeg"));
assert_eq!(image_type(b"RIFF1234WEBP"), Some("image/webp"));
assert_eq!(image_type(b"<wallpaper>private text</wallpaper>"), None);
}
#[test] fn failed_api_responses_and_unsafe_upload_urls_are_rejected() {
assert!(api_data(200, &serde_json::json!({"code":0,"data":{}})).is_ok());
assert!(api_data(422, &serde_json::json!({"code":1120})).is_err());
assert!(api_data(200, &serde_json::json!({"data":{}})).is_err());
for url in ["http://example.com", "file:///tmp/a", "https://[email protected]"] { assert!(https_url(url).is_err()); }
}
}
+15 -1
View File
@@ -1002,6 +1002,7 @@ impl WebRtcSession {
// Default file-transfer folder: the desktop user's home directory.
let home = std::env::var("HOME").unwrap_or_else(|_| "/".into());
let (mut desktop, mut promoted, mut lock_reported) = (desktop, false, desktop);
let mut privacy_reported = false;
let mut screen = screen;
loop {
loop {
@@ -1056,11 +1057,20 @@ impl WebRtcSession {
if !lock_reported {
lock_reported = true;
tokio::spawn(crate::session_lock::report_states(channel.clone(), sequence.clone(), crate::session_lock::watch_locked()));
}
// The viewer's menu only learns about a mode it did not ask for (an
// auto-enable) from this push, so desktop peers need it too, not only a
// tool peer promoted to desktop.
if !privacy_reported && crate::privacy_screen::supported() {
privacy_reported = true;
let (channel, sequence, actions) = (channel.clone(), sequence.clone(), init_actions.clone());
let portal = portal_desktop.clone();
let text_out = text_out.clone();
tokio::spawn(async move {
let mut previous = crate::privacy_screen::current_type();
// 0 is not a wire type: the first tick must push the effective state.
// An auto-enable can land before this task starts, and the viewer
// never sent an RPC to learn the mode from a response.
let mut previous = 0u8;
let mut tick = tokio::time::interval(std::time::Duration::from_secs(1));
loop {
tick.tick().await;
@@ -1068,6 +1078,7 @@ impl WebRtcSession {
let current = crate::privacy_screen::current_type();
if current == previous { continue; }
previous = current;
log::info!("Privacy state change pushed: type={current}");
let permission = portal.as_ref().map_or(crate::system_metrics::Permission::Allow, |p| p.snapshot().permission(true));
let ts = std::time::SystemTime::now().duration_since(std::time::UNIX_EPOCH).unwrap_or_default().as_secs();
let payload = actions.metrics_payload(desktop_sound, permission);
@@ -1075,6 +1086,9 @@ impl WebRtcSession {
text_out.metrics(message.clone());
if channel.send(&bytes::Bytes::from(message)).await.is_err() { return; }
let state = crate::privacy_screen::state_message(sequence.fetch_add(1, std::sync::atomic::Ordering::Relaxed), ts);
// Android 4.43.0 handles privacy replies on TEXT; CONTROL stays for
// viewers that only read the desktop channel.
let _ = text_out.send(state.clone());
if channel.send(&bytes::Bytes::from(state)).await.is_err() { return; }
}
});