Compare commits

..
120 Commits
Author SHA1 Message Date
VallierDevandClaude Opus 5.5 ebdd362452 release: v0.2.46
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-02 18:23:23 +08:00
VallierDevandClaude Opus 5.5 26811018e0 fix(clipboard): name the Unicode text offer predefined_13 for Windows viewers
A CF_UNICODETEXT name made the Windows viewer register a custom
clipboard format instead of using id 13, so Linux text never reached
the standard Unicode format. Fixes #151.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-02 18:23:23 +08:00
VallierDevandClaude Opus 5.5 c3959c01e9 release: v0.2.45
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-02 13:20:08 +08:00
m ef14f76422 fix(viewer): disable local IME text input in remote desktop window (#150) 2026-11-02 13:18:55 +08:00
VallierDevandClaude Opus 5.5 480819e369 release: v0.2.44
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-02 11:18:42 +08:00
Jeff Zhang f4f16aafe4 fix(privacy): synchronize Mac viewer privacy status over TEXT (#148)
* fix(privacy): synchronize Mac viewer privacy status over TEXT

* fix(webrtc): bound pending TEXT replies and coalesce metrics
2026-11-02 11:17:55 +08:00
VallierDevandClaude Opus 5.5 cb6f5b6617 release: v0.2.43
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-02 02:14:37 +08:00
Jeff Zhang 8e30371317 feat(host): KDE Wayland privacy screen (RPC 7) (#146)
* feat(host): KDE Wayland 被控端防窥模式(隐私 / 关屏)

viewer RPC 7 打开防窥时,采集和输入切到 KWin 虚拟输出(portal ScreenCast VIRTUAL),
再用 kscreen-doctor 禁用物理屏;隐私模式随后重新启用物理屏并全屏覆盖桌面壁纸。
防窥期间通过 KWin InputDevice 禁用本地键鼠,指针/按键/文字改走 uinput
(KDE 不处理虚拟输出共享上的 portal 输入)。

- privacy_type 实测:1 关闭、2 隐私(壁纸)、3 关屏;SettingMetric 4/7 上报真实状态
- 恢复记录 + privacy-guard 子进程:主机以任何方式结束(含 SIGKILL)都恢复屏幕和输入
- src/privacy_screen/ 分层:控制器/协议/记录/守护/遮挡窗口共享,桌面实现走 Backend trait(kde/)
- portal:Session::set_virtual,闭包恢复按当前源重开;编码器随 portal 尺寸变化重建

Refs #140

* fix(privacy): 按 Mac 客户端协议应答防窥请求,修复授权竞态

- FeatureFlag ff_private_screen=2(ENHANCED_PRIVACY),声明支持关屏
- 先回 RPC 7 应答再切换,避免客户端超时报 9998;切换失败发 ReportError -7
- 应答 RPC 25 update_screen_saver_req(RpcResponse 21),隐私模式不再被中止
- SettingMetric 4/7 上报开关与最近一次模式(host_settings.json privacy_type),状态变化推送 SystemStateChange 5
- portal 会话串行打开,打开失败回填一次性授权:快速重连时防窥切换与闭包恢复并发曾清空保存的授权

字段号与枚举取自官方 Mac 客户端的 SwiftProtobuf name map。
已知限制:Mac 客户端防窥菜单切换后仍显示"不启用",实际模式正确。

Refs #140

* fix(privacy): 处理 #146 评审意见

- 预检 uinput:injector 未打开 uinput(/dev/uinput 不可用或 UU_INPUT_BACKEND=native)时,
  在改动输出和设备之前拒绝防窥(虚拟输出共享上 KDE 忽略 portal 输入)
- leave() 中输入设备恢复失败在恢复输出后向上返回,保留 privacy-power.json 与 guard
- record::ownership() 只缓存成功持锁,guard 轮询和 recover() 可重试
- 遮挡窗口就绪握手:privacy-wallpaper 建好窗口后输出 ready,5 秒内未就绪则报错并回滚
- rebase 到 main(#145):DMA-BUF 打开路径跳过虚拟输出、失败同样回填授权;
  #145 的 uinput 指针路径也按隐私模式的虚拟输出区域换算坐标
- README 表格压缩为一句,细节在 docs/privacy-screen.md

Refs #140

* docs(privacy): 注明 ff_system_metrics=3 对应的枚举

Refs #140

* fix(privacy): resolve lifecycle and restoration review findings
2026-11-02 01:14:10 +08:00
VallierDevandClaude Opus 5.5 0ea37758fb release: v0.2.42
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-01 23:13:50 +08:00
Jeff Zhang 73293318b4 feat(portal): VAAPI DMA-BUF zero-copy, in-process Opus audio and lock-screen uinput control (#145)
* feat(audio): capture and encode Opus in process

* feat(portal): encode VAAPI from leased DMA-BUF frames

* fix(input): route Portal controls and committed ASCII through uinput

* docs(portal): shorten setup notes and colocate hardware acceptance guidance

* fix(input): preserve GNOME IME guard for committed uinput text

* build: link pulse/opus after the static C archive (--as-needed)
2026-11-01 22:12:04 +08:00
AZsaber 1bdc0eb910 fix(viewer): prevent compressed-frame queue overflow at high input rates (#143) 2026-11-01 21:11:07 +08:00
Jeff Zhangandferstar 33861082dc build: link inproc-av dependencies after the static engine archive (#105)
GNU ld with --as-needed (Ubuntu default) drops shared libraries listed before
libx11_engine.a, so --features inproc-av failed to link with undefined gbm_*,
xcb_dri3_* and xcb_damage_* on Ubuntu (found on aarch64; Arch is unaffected).

Co-authored-by: ferstar <[email protected]>
2026-11-01 20:11:39 +08:00
m 2422fce673 feat(ui): modernize GTK styling and add appearance settings (#144)
* feat(ui): modernize GTK styling and add appearance settings

* fix(ui): address review and avoid cached Cairo surface in smoke tests
2026-11-01 19:09:39 +08:00
AZsaber 1ff3383de7 feat(viewer): opt-in native gamepad and rumble for Windows hosts (#142)
SDL viewer forwards one mapped controller (gpd_connect/gpd_update/gpd_disconnect) and receives two-motor gpd_vibration over the existing CONTROL channel. Default off (UU_VIEWER_NATIVE_GAMEPAD=1).
2026-11-01 01:04:21 +08:00
tingfeng347 6bf05a6361 修复 niri 主控端控制官方 Windows 时的双向文本剪贴板同步 (#138)
Fixes #139.
2026-10-30 13:43:36 +08:00
VallierDevandClaude Opus 5.5 d9c43897c7 Release v0.2.41
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-29 23:46:34 +08:00
9fe1351de1 控制端:重置后关键帧等待接受 I 片/恢复点 SEI 并 1.5 秒超时放行 (#136) (#137)
v0.2.40 在本地重置后只接受 IDR,Mac 被控端对 PLI 不回 IDR 时画面一直空白。
现在 H.264 的 I 片和恢复点 SEI 也算重启点,等待超过 1.5 秒照常解码;
丢弃单元时也取走解码器已完成的画面。

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-29 23:43:34 +08:00
Its.spixy c0b0ca6afb GNOME Portal:手机控制端拖动滚动、按住选中、短按点击 (#134)
Replayed as touch, a phone drag scrolled in browsers but still selected
text in VTE terminals (Ptyxis, GNOME Terminal), as on a real touchscreen.
By default on the portal backend the host now decides per press: moving
past 12 px within 450 ms scrolls smoothly (NotifyPointerAxis or EIS
scroll, content follows the finger, `finish` on release so clients may
coast), holding still selects with button 1 down, and a short press
clicks. This works in terminals too and needs no touchscreen consent.
UU_TOUCH_INPUT=touch keeps the touchscreen replay (with its one-time
consent upgrade); UU_TOUCH_INPUT=0 keeps plain mouse drags.
2026-10-29 23:34:30 +08:00
Its.spixy 11097b5847 GNOME Portal:手机触控模式拖动按触摸屏重放,输入法 ASCII 直接按键输入 (#131)
* portal: mobile touch-mode drags become touch, consent asks once for it

In touch mode the Android viewer sends a finger as a left-button drag at
absolute positions (observed: press, mouse_move_absolute stream, release),
which on GNOME selects text instead of scrolling. SelectDevices now also
asks for the touchscreen type where AvailableDeviceTypes offers it, and a
drag from an Android/iOS controller (controller_platform 2/3) that follows
absolute motion is replayed as one finger through NotifyTouch* or EIS
touch, so the desktop scrolls and taps as on a touch screen. Relative
motion (the trackpad mode) and every other viewer keep mouse buttons.

A consent saved before this restores keyboard and pointer only. The first
mobile drag then asks the host once per run in the background (GNOME's
share dialog, also visible on the phone; the consent timeout closes it)
and swaps the new session in only when it grants the touchscreen for the
same monitor and size. The saved consent is never removed beforehand.
UU_TOUCH_INPUT=0 keeps mouse drags and never asks.

* input: type mobile IME text as portal keysyms on Latin GNOME layouts

Each mobile text_input was set as the clipboard and pasted with
Shift+Insert, which VTE terminals bind to the PRIMARY selection: text
typed from the phone into a terminal pasted whatever was last selected
(observed: a selected line of box-drawing characters for every letter).
When GNOME's active input source (first of mru-sources) is a Latin xkb
layout, printable ASCII, newline and tab now go through
NotifyKeyboardKeysym, where Mutter picks the key and Shift level of the
active layout. Other text, IBus engines, KDE and EIS sessions keep the
clipboard paste, which no longer replaces the clipboard for plain typing.

* portal test: accept libei before 1.3 rejecting a touch outside one of two regions

libei 1.2 (Ubuntu 24.04, CI) accepts a touch only inside every region of the
device; 1.3.0 checks any region. The harness device also carries a region for
another screen, so the older library rejects the touch with a client-bug
diagnostic. A real one-stream session has one region.
2026-10-29 19:49:15 +08:00
Its.spixy 6a0cd5bda6 控制端:跨会话记住画质、帧率和真彩设置 (#133)
The host starts every session at the official defaults (Auto, 60 fps,
4:2:0), so a choice made for a slow link was lost on reconnect. Save them
in viewer.json with the other preferences and send the ones that differ
once CONTROL answers the echo.
2026-10-29 18:48:30 +08:00
VallierDevandClaude Opus 5.5 4cfdd563f7 Release v0.2.40
TURN TCP: report an inspecting proxy that answers with HTTP inside the relay stream.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-29 11:46:02 +08:00
Its.spixyandClaude Opus 5.5 0cbfc5b4f1 控制端:原生分辨率、中英文界面、控制中心、实测 RTT 与稳定性修复 (#129)
* viewer: decode at the host's native size and filter window scaling

Every frame was scaled into a fixed 1920x1080 canvas and SDL then stretched it
to the window with nearest-neighbour sampling, so remote text looked uneven and
blurry. Decode at the native size (read from ffmpeg's verbose scaler line),
restart the decoder when the host resolution changes, and use linear render
scaling. UU_VIEWER_SIZE keeps the fixed canvas, now resampled with Lanczos.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Add Chinese/English UI language

All GTK windows (viewer launcher, tool windows, host main window and QR login)
and viewer messages are available in Chinese and English. The language comes
from UU_LANG, the choice saved in Settings -> General, then the locale.
README: document the fork's changes and language selection.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Host main window: add the language selector

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: control center, network status, loading screen, device previews

In-window chrome drawn on the SDL canvas with a fontconfig font (ab_glyph):
- loading animation with the connection stage instead of a black window
- control center (Ctrl+Alt+M or the top tab): quality, fps, true color,
  resolution, fit/1:1, volume, auto lock and host mute (SimpleAction 19,
  14/18/16), system shortcut grab, file transfer, watch mode, full screen,
  disconnect
- network status panel (Ctrl+Alt+G): time, route, fps, bitrate, RTT, loss
- launcher device previews from the last remote picture (local 0600 cache)
- viewer sign-in keeps the local host user service running, so this
  computer joins the account's device list; the settings switch controls it

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: compact cascading control center

Narrow category list with an options card beside the selected row, sized to
its content; opaque cards with a hairline border and soft shadow, so the
remote picture no longer shows through.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: keep the control center responsive; resync on a key frame

The menu was rasterized on every mouse event just to hit-test it; hit testing
now uses the layout alone and the drawn menu is cached until what it shows
changes. A stalled UI overflowed the access-unit queue, and the reset decoder
then smeared P-frames into blocks; after a reset it now waits for an IDR/IRAP
while requesting key frames. The tab icon is drawn, since fonts without U+2630
showed a box.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: measured RTT, no crash on closing tool windows, account card

webrtc-ice never measured the round trip, so the network panel always read
'RTT --'. Binding responses now record it on their pair, and the selected
pair is pinged when the sample is older than the keepalive interval, since
a streaming pair never idles (vendor/webrtc-ice/PATCHES.md).

On Wayland, libdecor's GTK plugin drew SDL's title bar with GTK3 from SDL's
thread while the file window ran gtk_main on its own; closing that window
crashed in GTK's style code. GTK builds now offer libdecor only the cairo
plugin unless LIBDECOR_PLUGIN_DIR is set.

Settings > General gets an Account card with the signed-in user and Sign out.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* README: keep the language section, without the fork notes

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: English server errors in the English UI; stable type_ipc tests

UU servers answer in Chinese only. The English UI now translates the known
messages (2002 target already controlled, assistance refusals) and shows the
code for unknown ones instead of Chinese text.

type_ipc tests shared one temp directory per process and read
XDG_RUNTIME_DIR while another test pointed it at a planted directory; each
call now gets its own directory and socket tests hold the environment lock.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer launcher: switching the language restarts the launcher

The choice was saved but took effect only on the next start, so the window
seemed to ignore it. The launcher now re-executes itself in place; session
windows are separate processes and stay connected.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: show pictures as soon as decoded; coalesce mouse motion

The raw-stream parser closed an access unit only when the next began, and
frames were collected only when another one arrived, so a single remote
change (a typed letter) waited for the next one. An access unit delimiter
now follows each unit and the loop drains finished frames between units.

Motions within one 8 ms poll collapse to the newest position (click order
kept), so a drag no longer queues behind itself on a relayed path.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer launcher: hosting is opt-in

Signing in to the viewer no longer installs or enables uuremote-native.service.
Only the Settings switch enables or disables it, and the unit's enabled state is
the saved choice, so turning it off survives a restart. A new sign-in restarts the
host only when the user turned it on and it is running.

PATCHES.md: the RTT keepalive also runs on the host; checked with the official
Android client controlling a Linux host.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* viewer: drop SDL event types sdl2 0.37 does not define

sdl2 0.37 transmutes every event type into SDL_EventType. sdl2-compat on SDL3
delivers types SDL 2 does not define (0x207), which is undefined behaviour and
aborts with debug checks (clipboard_requests_use_existing_window on Fedora 44).
Poll raw events and skip those types before the crate converts them.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Keep the package version at 0.2.39

The maintainer sets the version at release time.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-29 10:45:11 +08:00
Its.spixyandClaude Opus 5.5 47c7728822 GNOME Portal:多显示器切换、精确触控、断开后停止共享 (#128)
* portal: switch monitors on GNOME, precise touch, stop sharing when idle

GNOME grants one monitor per portal consent and refuses multi-select, so
each Mutter monitor gets its own saved consent (gnome@<connector>). The
monitors are advertised as screens; a switch opens that monitor's session
(silently once consented, GNOME asks on the host the first time) and swaps
it into the shared PortalSession, whose frame size follows the monitor.

Absolute motion and clicks go through the portal session: a uinput tablet
spans every monitor, and clicks on the separate uinput queue could land
before the compositor moved the pointer.

An idle watch ends the portal session (screen-share indicator off) once no
desktop controller is left for two checks; the next one reopens it with the
saved consent.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* portal: stop screen sharing as soon as the last controller leaves

The idle watch stays as the fallback for controllers that vanish without
a release event.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* portal test: accept the runtime-engine message in portal builds

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-29 10:44:30 +08:00
Its.spixy e503041dac 登录:跨进程串行化设备注册 (#127)
主机扫码窗口与控制端登录可能各自调用 device/windows/init,导致账号绑定一台设备而 config.json 保存另一台(主机显示离线的幽灵设备)。现在在 config.json 旁的排他文件锁下注册设备,取锁后重读配置,第二个流程复用已注册设备。

感谢 @spixyy7 的贡献。

🤖 Generated with [Claude Code](https://claude.com/claude-code)
2026-10-29 04:40:52 +08:00
Sile Liu 835bfa2319 Fix niri monitor switching, rotated input and mobile text (#71)
niri 实验性支持:三屏切换、90°/180°/270° 旋转输出的采集与指针映射、手机中文文本输入,全部 gated 在 NIRI_SOCKET,不影响 Hyprland/X11 路径。新增 wayland_transform.h 及其 ASAN 单测。

感谢 @WALKERKILLER 的贡献与 CachyOS + niri 实机验收。

🤖 Generated with [Claude Code](https://claude.com/claude-code)
2026-10-29 01:39:01 +08:00
VallierDevandClaude Opus 5.5 482c01a85d viewer tests: accept the video track RPC in the loopback session
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 20:45:43 +08:00
VallierDevandClaude Opus 5.5 7f6cf6e092 Release v0.2.39
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 20:39:58 +08:00
VallierDevandClaude Opus 5.5 c0c04a2c98 viewer: request the desktop video track like the official viewer (#124)
The official iPhone viewer sends RpcRequest case 15 SendVideoTrackReq (no
fields) right after CONTROL opens. Without it a second session only joins the
stream already encoded for another viewer: no SPS/PPS/IDR, so it stays black.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 20:37:43 +08:00
VallierDevandClaude Opus 5.5 b636f1b278 Release v0.2.38
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 20:22:03 +08:00
VallierDevandClaude Opus 5.5 64d2ffbdd3 ICE: trust the system certificate store for TURN over TLS
A TLS-inspecting HTTP proxy re-signs the TURN certificate with a CA that the
host's administrator installed in the system store; OpenSSL accepts it while
the bundled Mozilla roots alone fail with UnknownIssuer.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 20:21:37 +08:00
VallierDevandClaude Opus 5.5 5656f33d86 Release v0.2.37
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 19:35:12 +08:00
VallierDevandClaude Opus 5.5 6a633e1bc4 ICE: gather TURN relays over TCP/TLS through the HTTP proxy with UU_USE_PROXY=1
Upstream webrtc-ice only gathers UDP relays. Forced-relay sessions also offer
turns:<ip>:<port>?transport=tcp, the only media path on hosts whose UDP cannot
reach the TURN servers but whose TCP goes through an HTTP proxy. Vendor
webrtc-ice 0.10.1 with a TCP/TLS dialer (optional HTTP CONNECT) that frames
STUN/ChannelData for the unchanged turn client. Certificates are chain-verified;
a name mismatch is accepted only for IP-literal TURN URLs. Enabled only with
UU_USE_PROXY=1; default UDP gathering is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 19:34:24 +08:00
VallierDevandClaude Opus 5.5 ab137a1b20 Release v0.2.36
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 17:27:17 +08:00
VallierDevandClaude Opus 5.5 092ea713f8 X11: fall back to XGetImage when MIT-SHM attach is refused
XShmAttach fails asynchronously with BadAccess when the X server cannot reach
the segment (for example a server in another container); Xlib's default error
handler exited the host before the existing XGetImage fallback could run.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 17:26:01 +08:00
VallierDevandClaude Opus 5.5 53d5f0e144 viewer: request key frames until the first frame is shown (#124)
A session that joins a host already streaming to another viewer can receive a
clean stream with no IDR in flight, so the loss-driven PLI never fired. Ask
every 30 access units until something is presented, and warn after 300.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 16:36:35 +08:00
VallierDevandClaude Opus 5.5 6b5216df35 Release v0.2.35
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 15:21:34 +08:00
VallierDevandClaude Opus 5.5 d66937a01c Signaling: honor the REST client's opt-in HTTP proxy policy (#123)
Route host and viewer WebSocket signaling through the shared reqwest client so UU_USE_PROXY=1 applies to signaling as well (HTTP/HTTPS proxies only, no direct fallback, no redirects, strict upgrade validation). ICE/WebRTC media is not proxied.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 14:42:12 +08:00
VallierDevandClaude Opus 5.5 825f964f7d doctor: warn about extra host instances; README: never share config.json (#122)
Count only top-level hosts (helpers such as the Wayland capture process and
the login window are children) and explain that two instances with one
identity kick each other out of the room.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 14:32:37 +08:00
VallierDevandClaude Opus 5.5 3f2da6f587 doctor: count re-executed host processes by executable (#122)
The host re-execs through /proc/self/exe, so its process name becomes "exe"
and pgrep -x uuremote-server missed duplicate hosts.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 14:26:34 +08:00
VallierDevandClaude Opus 5.5 027abba44d Signaling: log the shape of cloud room leaves without a peer id (#122)
Keys, value types and lengths only, as for SOAC offers.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 14:02:10 +08:00
VallierDevandClaude Opus 5.5 ef86019b39 Login: distinguish QR polling failures from expiry with safe diagnostics (#121)
Classify QR request failures (timeout/connect/decode/body/request) with phase, elapsed time and HTTP/API status only; never print tickets, URLs or server content. Extract and test the polling decisions; keep the 60 s timeout and official refresh behaviour.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-28 13:28:50 +08:00
shofukantktsandshofukantkts 003da254a6 Wayland: type mobile text_input via clipboard paste on Portal and compositors without spare keycodes (#119)
* Wayland: type mobile text_input via clipboard paste on Portal and compositors without spare keycodes

* Wayland: address review comments for mobile text_input clipboard fallback

- Guard external clipboard commands in unit tests to eliminate desktop side effects
- Narrow paste fallback to Wayland and Portal backends only
- Document clipboard override and two-way sync behavior in README (both zh and en)
- Unify disable switch via UU_WAYLAND_TEXT=0

---------

Co-authored-by: shofukantkts <[email protected]>
2026-10-27 22:14:56 +08:00
VallierDevandClaude Opus 5.5 7a86fab340 Release v0.2.34
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-27 13:10:49 +08:00
VallierDevandClaude Opus 5.5 d631849f1d Viewer: map the desktop window before the first decoded frame (#118)
Wayland shows a toplevel only after its first buffer, so a stream that never
yields a picture left no window at all. Present a black buffer on creation and
on resize/expose while no frame has arrived.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-27 12:10:35 +08:00
VallierDevandClaude Opus 5.5 d04d241411 Viewer: repaint the last frame after a compositor resize (#118)
Tiling or maximizing the SDL viewer resized the surface, but nothing was
drawn until the next decoded frame, so a static remote desktop stayed blank.
Repaint the last frame on SizeChanged/Resized/Exposed/Maximized/Restored.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-27 11:10:53 +08:00
VallierDevandClaude Opus 5.5 2eece30287 Signaling: bound the WebSocket handshake so reconnect retries after a stall (#115)
After a network change the DNS/TCP/TLS/upgrade could stall forever after
room credentials were acquired; the reconnect loop never retried. The
handshake now fails after 20s and the existing 5s retry takes over.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-26 20:03:54 +08:00
VallierDevandClaude Opus 5.5 1e94175414 Release v0.2.33
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-26 19:02:33 +08:00
VallierDevandClaude Opus 5.5 cfe9601874 WebRTC: restart a promoted desktop's video after its stream ended (#114)
A tool peer promoted by capture_desktop stayed marked as the desktop after its
encoder exited on its own (Wayland capture failing while locked/DPMS off), so a
later capture_desktop on the same peer only logged and never restarted the
video. Treat a finished stream task as ended: capture_desktop asks for the
desktop again and promote() restarts the video on the existing input lease.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-26 18:02:56 +08:00
VallierDevandClaude Opus 5.5 ab5d0a656b Release v0.2.32
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-25 22:54:59 +08:00
VallierDevandClaude Opus 5.5 dcc67ed550 WebRTC: recompute the peer state from the real DTLS transport after ICE recovers
The ICE transport state callback was created before the DTLS transport and
captured the default placeholder, whose state never leaves New. Every later
ICE change therefore computed the peer state against a "New" DTLS: after a
brief ICE Disconnected -> Connected the PeerConnection settled on New instead
of Connected, so the idle room renewal treated the still-working
port-mapping peer as idle and tore the room down.

Wire the callback to the real DTLS transport through a weak slot filled right
after it is created.

Fixes #109

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-25 22:53:22 +08:00
liuyanghejerry bf7bd50062 viewer: forward mouse wheel events as mouse_scroll (#108)
SDL MouseWheel events had no arm in the event translator, so wheel input was dropped. Send one notch as 120 wire units (the Mac convention), use SDL's precise deltas for trackpads, honour the flipped direction for natural scrolling, and keep the existing focus and view-only gating.
2026-10-24 22:42:53 +08:00
liuyanghejerry 287b21a622 viewer: map pointer input to the content rectangle of the padded canvas (#107)
The CLI decoder pads every frame into a fixed 1920x1080 canvas so rawvideo frames have a known byte length. Input mapping and the SDL viewport treated that padded canvas as the picture, so non-16:9 hosts (official Macs are usually 16:10) had the pillarbox bars inside the 0..1 range: the remote pointer lagged inward and the error grew towards the screen edges.

Parse the coded picture size from ffmpeg's one-time "Video:" stream line, carry it on Frame.content, and render/map only the content sub-rectangle. 16:9 streams are unchanged; UU_VIEWER_SIZE keeps working.
2026-10-24 21:41:48 +08:00
Mr. ErrorandClaude Code bcde9f967c Signaling: keep heartbeat detection alive when delivery stalls (#104)
* Signaling: keep heartbeat detection alive when delivery stalls

The receive loop awaited event_sender.send() without a bound. When the main loop was parked in PeerConnection::close after a released peer, the 64-slot event queue filled and the receiver blocked inside the loop body, so the Engine.IO deadline in the same select! never ran. The host stayed online with a half-closed socket for hours.

- add a watchdog over the last inbound frame, independent of the receive loop
- bound event, pong and control sends with a timeout or try_send
- timeout PeerConnection::close so one dead peer cannot stall signaling
- regression test with a blocked event consumer

Co-Authored-By: Claude Code <[email protected]>

* Signaling: always report Disconnected when the receiver stops

The receive loop can break without enqueueing Disconnected: event delivery exceeded SEND_STALL_TIMEOUT, or the writer already stopped. receiver_done then lets the watchdog exit, while the main loop's rx_event stays open because the idle-renewal timer holds a sender. The host stays in a dead room until the 15-minute renewal, which is deferred while a peer is connected.

Hand a Disconnected off from a detached task after every loop exit. Duplicates are harmless: the main loop breaks on the first one and drops the old receiver.

The new test keeps the consumer blocked past SEND_STALL_TIMEOUT, then drains the queue and expects Disconnected.

Co-Authored-By: Claude Code <[email protected]>

---------

Co-authored-by: Claude Code <[email protected]>
2026-10-24 16:38:43 +08:00
VallierDevandClaude Opus 5.5 df9429495f Release v0.2.31
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-24 11:15:00 +08:00
VallierDevandClaude Opus 5.5 ba82bc432a nvenc: opt-in UU_NVENC_BUFFER_MS VBV buffer for high-resolution keyframes (#103)
The 100-500 kbit NVENC default squeezes a 1440p IDR into ~62 KB, so the
picture blurs and sharpens once per GOP. Share the VAAPI buffer parser so
UU_NVENC_BUFFER_MS (10-1000 ms of the bitrate cap) applies to the FFmpeg
pipeline and the in-process engine; default unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-24 10:44:59 +08:00
VallierDevandClaude Opus 5.5 648eeca03d Release v0.2.30
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-24 04:41:03 +08:00
VallierDevandClaude Opus 5.5 f97370782f Start the desktop on a tool connection when the viewer sends capture_desktop (#99) (#101)
When a port-mapping connection is already open, the Mac viewer opens the desktop by sending SimpleAction 4 (capture_desktop) on that connection's CONTROL channel instead of a new offer. The host now promotes that tool connection to the desktop: video, cursor, TEXT clipboard (with the capability echo replayed) and session counting follow a per-peer active flag. A later desktop demotes it without closing its port mappings. Stream tasks are fenced by an abort handle, and the X11 capture is rebuilt if the screen size changed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 13:40:14 -07:00
Jeff Zhangandferstar 8792fb4eca vaapi: raise the in-process RC max_qp to 51 so capped presets reach the QP 51 floor (#102)
Co-authored-by: ferstar <[email protected]>
2026-10-23 11:24:15 -07:00
VallierDevandClaude Opus 5.5 c041160d6d Release v0.2.29
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 21:52:30 +08:00
VallierDevandClaude Opus 5.5 69aecf0269 X11: select one monitor with UU_X11_MULTISCREEN=1 (#100)
Opt-in X11 monitor selection for #98: RandR monitors from xrandr --listmonitors through the existing screen-switch path; x11grab reads display+x,y at the monitor size, absolute input adds the monitor offset, in-process engine and xrandr resize are skipped while a region is captured.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 06:51:42 -07:00
VallierDevandClaude Opus 5.5 979b62d271 Issue template: keep peer and port-mapping log lines, drop webrtc noise, mask IPv6/MAC
The WARN filter let webrtc_ice/dtls lines push the useful ones out of the
last 80 lines (#99). Also mask IPv6 and MAC addresses, and ask for the
graphical session terminal: doctor from SSH/tty reports no DISPLAY.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 21:20:42 +08:00
Jeff Zhangandferstar 6a3da14961 Switch the desktop encoder on SIGUSR2 without dropping the session (#96)
set-encoder / set-codec signal the running host (only when /proc/<pid>/exe is this exact binary); the live desktop stream re-plans its encoder at the next frame boundary, sends CaptureSettingSync when 4:4:4 falls back, and prints a note when no host was notified. Step 3 of #85.

Co-authored-by: ferstar <[email protected]>
2026-10-23 03:24:29 -07:00
VallierDevandClaude Opus 5.5 792408e6f5 Release v0.2.28
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 16:22:37 +08:00
VallierDevandClaude Opus 5.5 61c3f91e9e Install: install.sh installs FFmpeg; host notifies the desktop user when it is missing (#97)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 01:21:57 -07:00
VallierDevandClaude Opus 5.5 1bb43a9426 Release v0.2.27
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-23 15:25:54 +08:00
Jeff Zhang 9d3b3da3f5 Video: probe the auto encoder in the background (NVENC then CPU) (#93)
Refs #85 (step 2).
2026-10-23 00:24:31 -07:00
阿夜 1009bdeaf2 fix(video): keep streaming after display wake failures (#95)
Fixes #94.
2026-10-22 21:24:51 -07:00
212duoand212duo fa7606894f feat(viewer): secure type input that reuses the open desktop session (#70)
Co-authored-by: 212duo <[email protected]>
2026-10-22 20:24:18 -07:00
963875516a Video: encoder and codec selection settings (set-encoder / set-codec) (#92)
Step 1 of #85: unified encoder/codec selection (host_settings.json > UU_VIDEO_* > auto), set-encoder / set-codec subcommands with locked merge writes, per-connection selection snapshot, doctor shows sources.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 16:24:22 -07:00
VallierDevandClaude Opus 5.5 b6703b19df Release v0.2.26
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 23:54:56 +08:00
76a225a235 Tray: install the symbolic icon into the user hicolor theme (#90)
v0.2.25 showed KDE's unknown icon on Plasma 6.8 (#87). Plasma resolves
SNI icons theme by theme, trying dash-trimmed names in each theme before
the IconThemePath app theme, which comes last, so a cache-only icon is
easy to lose. Write it to $XDG_DATA_HOME/icons/hicolor (found by every
panel's default lookup; only when changed) and keep that as the theme
path. The new name "uuremote-tray-symbolic" cannot trim into the colored
"uu-remote-linux" app icon and avoids entries cached under the old name.

Checked with KIconLoader on Plasma 6.7 (Plasma's IconThemePath setup and
the global loader both resolve it, with the colored icon installed too).

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:54:23 -07:00
da99c1ceb4 NVENC: skip direct BGRA input when NVIDIA drives the display (#89)
#16: with display, capture and encode all on an RTX 5070 the packed-RGB
input path is 19% slower in the probe and 25% end to end than CPU
swscale, while on an iGPU-composited desktop it was neutral to faster.
Keep it on by default only when no connected DRM connector belongs to an
nvidia-bound card; UU_NVENC_RGB=1 forces it, =0 still disables it.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 08:12:31 -07:00
VallierDevandClaude Opus 5.5 0fe9b979e5 Release v0.2.25
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 21:05:37 +08:00
cb4850d296 Tray: monochrome icon that follows light/dark panels (#88)
* Tray: monochrome icon that follows light/dark panels

The tray used the colored app icon (or the theme's "computer" when it was
not installed), which is hard to see on dark panels. Ship a 16px symbolic
icon embedded in the binary, write it to the user cache and pass that
directory as the indicator's icon theme path: GTK and the GNOME
AppIndicator extension recolor "-symbolic" names, KDE recolors the
ColorScheme-Text class. Fixes #87.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* AGENTS: config.json is parsed once, re-read only on LoginExpired

Reported in #85: the 60 s sleep is the room renewal poll, not a config reload.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 06:04:54 -07:00
VallierDevandClaude Opus 5.5 16ded48a99 Release v0.2.24
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 17:45:03 +08:00
d95053d490 X11: change the desktop resolution for the viewer's choice; survive live resizes (#86)
* Restart X11 capture at the new size when the desktop is resized mid-stream

A RandR resize during a session made x11grab fail with BadMatch on the old
size. read_encoder treated that as an encoder failure and walked the whole
fallback chain (NVENC -> CPU, HEVC -> H.264) with the stale size, then the
stream stopped ("Encoder output ended") and the viewer froze. New connections
already re-probed the geometry (#18); live ones did not.

- When an X11 stream fails and the root size differs, skip the encoder
  fallback and restart capture at the new size with the same settings.
- Absolute pointer mapping follows the refreshed X11 size.
- New connections compare the root size with their capture instead of the
  engine's change flag, which a live stream may already have consumed.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

* Change the X11 desktop resolution when the viewer picks one

The official Windows host changes its display resolution for the viewer's
分辨率 choice; this host only scaled the encoded stream, so a smaller choice
made text smaller and blurrier instead of larger.

On X11 the capture/resolution RPC now switches the primary output's mode with
xrandr (an existing mode of that size, else a CVT reduced-blanking mode at
60 Hz, or 30 Hz above an HDMI 2.0 pixel clock), re-applying it when mutter
resets the mode after the list changes. resolution_type 3 (original) and the
end of the last desktop stream restore the mode in use before the first
change. The stream restarts capture at the new native size and reports it in
the screen sources and CaptureSettingSync. UU_DESKTOP_RESIZE=0 keeps the old
encoder scaling; Wayland is unchanged.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

---------

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 02:44:18 -07:00
VallierDevandClaude Opus 5.5 50ed54d77a Release v0.2.23
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 16:34:37 +08:00
d6752e77c8 Fix SRTP rollover counter rewinding on delayed NACK retransmissions (#83) (#84)
webrtc-srtp 0.12.0 stored every sequence number and used a 100-packet window to
guess the rollover counter. A NACK retransmission of a pre-wrap packet sent after
the wrap (65000 after 85) rewound that state, so the next new packets were
protected with ROC+1 and the viewer failed authentication on all of them: frozen
video after the Windows viewer returned from the background.

Vendor webrtc-srtp 0.12.0 with the RFC 3711 Appendix A half-space estimate and a
high-water index that retransmissions cannot move back. Regression tests fail on
upstream (65000 != 85) and pass with the fix for AES-CM/HMAC and AES-GCM.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: AYssu <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-22 01:34:07 -07:00
VallierDevandClaude Opus 5.5 9906dd4767 Release v0.2.22
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-22 15:14:55 +08:00
Jeff Zhang 9e2198b03d docs: AMD VAAPI verified on the in-process engine; CPU cost figures (#81)
README/README.en/AGENTS: AMD iGPUs (HawkPoint, Cezanne) are accepted on the inproc-av VAAPI engine with the official
Mac viewer; the FFmpeg process pipeline on AMD is not separately verified. inproc-av now covers VAAPI in process;
build headers listed. Thanks @ferstar.
2026-10-21 22:24:42 -07:00
Jeff Zhang 21c01d2e18 inproc-av: native VAAPI H.264/HEVC through DRI3 DMA-BUF, VPP and VCN (#80)
With --features inproc-av on X11 and UU_VIDEO_ENCODER=vaapi, VAAPI runs in process: a DRI3 DMA-BUF of the root
(XShm upload without DRI3) goes through VPP to NV12 and the hardware encoder. SPS/PPS(/VPS) and slice headers are
packed by the host because radeonsi (Mesa 26) does not write them. libva/libva-drm are dlopen'ed; release builds do
not enable inproc-av. The NVENC path is unchanged.

Accepted by the contributor on AMD HawkPoint1 (Mesa 26.2.3), 1920x1200@60, with the official Mac viewer
(HEVC, presets, fps, scaling). Intel iHD and 4K are not verified. Thanks @ferstar.
2026-10-21 15:25:13 -07:00
059a3b1bb8 inproc-av: 4:4:4 on the native NVENC engine (#76, #77)
H.264 High 4:4:4 / HEVC FRExt with chromaFormatIDC 3 and AQ off when 真彩 is requested; GPUs without YUV444 encode fail the capability check and fall back. full_chroma_available() no longer excludes the in-process path. UU_PROBE_CHROMA=444 for the probe.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 08:24:32 -07:00
76941459cc inproc-av: native in-process NVENC reading XShm directly (#74, #75)
Replaces the FFmpeg-based in-process encoder with a native NVENC engine (vendored nv-codec-headers n12.1.14.0, libcuda/libnvidia-encode dlopen'ed at runtime, primary context reuse). Fallback: native NVENC -> FFmpeg NVENC process -> libx264. inproc-av no longer links FFmpeg; VAAPI/CPU always use the process pipeline. Default builds are unchanged.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 07:26:45 -07:00
1fa346fd1f device_capability: list every supported format with its size, not 0x0 (#79)
The official viewer (libstreamer, Mac 4.43) treats a video_codec_capability entry
with width or height 0 as unsupported. The 4.37 Windows host we copied in #49 ran on
a GTX 660 without HEVC/4:4:4, so its 0x0 entries meant exactly that. Evidence by
@ferstar in #77.

Co-authored-by: VallierDev <[email protected]>
Co-authored-by: ferstar <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
2026-10-21 21:29:23 +08:00
VallierDevandClaude Opus 5.5 e09778cc94 Release v0.2.21: Wayland without virtual pointer/keyboard, systemd unit docs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 21:05:58 +08:00
VallierDevandClaude Opus 5.5 b1da297e42 Wayland: only a missing virtual pointer falls back to uinput (#78)
uu_wl_move returns -2 only when the compositor has no wlr-virtual-pointer; other failures are returned as before. Document UU_WAYLAND_NO_VIRTUAL_KEYBOARD.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 21:05:11 +08:00
ossSBandClaude Opus 5.5 c739036301 Wayland: virtual pointer and keyboard are optional; capture still starts (#72, #73)
Compositors without wlr-virtual-pointer, or that restrict the virtual keyboard to their input method (Denial), now bring up capture and fall back to uinput for input. UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1 skips the virtual keyboard.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-21 16:29:19 +08:00
25893cd4ab docs: align the user systemd unit with the deb package unit (#69)
Drop the hard-coded DISPLAY=:0 and install under graphical-session.target like packaging/deb; Xfce/i3, headless and the virtual desktop keep WantedBy=default.target. AGENTS.md recipe aligned.

Co-authored-by: ferstar <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 22:42:11 +08:00
VallierDevandClaude Opus 5.5 5089c0343c Release v0.2.20: QR sign-in matches the official client (#68)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 17:03:13 +08:00
VallierDevandClaude Opus 5.5 5fdb98b0f5 QR login follows the official client: status_query_ticket, 60 s long poll, stop on failure (#68)
From the official Mac client (UURemote 4.42; QRCodeGenLoginResponse decodes only qrcode_jump_url
and status_query_ticket, the status/by_qrcode bodies carry that ticket under "token"):
- gen/login is sent without a body; the status ticket is status_query_ticket (older token as fallback).
- The status long poll re-asks right after each answer with a 60 s request timeout (was 12 s).
- Status 3 regenerates at once, status 0 after 0.35 s, 4 logs in (3 no longer calls by_qrcode).
- Errors such as HTTP 400 code 1190 and timeouts stop polling until the user clicks the new
  刷新二维码 button (Enter in a terminal; one minute when neither exists). This replaces the
  v0.2.19 backoff and the re-register hint.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:58:00 +08:00
VallierDevandClaude Opus 5.5 89abae2369 Release v0.2.19: headless Wayland, custom bitrate, show and login fixes
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:34:37 +08:00
VallierDevandClaude Opus 5.5 0afc602e66 Login polling backoff and a hint for instantly expiring QR codes (#68); bitrate unit safeguard; doctor wording
- Never spin on immediate unchanged status answers or transport errors (2 s backoff); repeated
  QR codes that expire within seconds back off exponentially and point to re-registering the
  device identity, which recovered a flagged device in #68.
- Custom bitrate field 8 is bit/s (#67); values that can only be Mbit/s or kbit/s are scaled
  instead of capping the encoder at 1 kbit/s.
- doctor: without DISPLAY the X11 engine still tries :0/:1, so the #66 warning says that.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 16:29:57 +08:00
ZoranandJuanZoran 762cfccc44 Custom video bitrate is bits per second (#67)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 16:28:56 +08:00
axlrose 9520b69730 doctor: say so when the session has no screen to capture (#66)
Without DISPLAY and without WAYLAND_DISPLAY the desktop backend cannot
capture anything: the host logs 'Desktop unavailable ... x11_init failed'.
The report named X11 as the selected backend and nothing else, which reads
like a working setup. Name the missing display and note that the terminal,
file transfer and port mapping tools still work.
2026-10-20 16:28:51 +08:00
axlrose c45e4749b5 Wayland: a failed output-power handshake must not block screencopy (#65)
Output power management is optional: the engine comment already says so, but
uu_wl_wake() only tolerated a *missing* power manager. When the compositor
offers zwlr_output_power_manager_v1 and then refuses the mode (headless
outputs, outputs without DPMS), power_failed is set and the function
reported an error. capture::keep_display_awake() propagates that error and
video.rs aborts the whole capture task with '?', so a client could connect
but never received a frame.

Treat a failed power handshake like a missing one: skip waking the screen
and keep streaming.
2026-10-20 16:28:46 +08:00
VallierDevandClaude Opus 5.5 c1b8bfe1b3 show: report a skipped or crash-looping service instead of waiting 30 s (#62); document FFmpeg 6.x for inproc-av (#63)
systemctl start returns 0 when the unit is skipped by a Condition or keeps crashing under
Restart=; show now reads ActiveState/SubState/ConditionResult while waiting and names the real
problem. ffmpeg-sys-next's build script runs before ours, so FFmpeg >= 7 cannot be caught in
build.rs; the README and AGENTS state the 6.x requirement next to the build commands.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 15:24:33 +08:00
VallierDevandClaude Opus 5.5 03d2311649 Release v0.2.18: Debian packages, experimental WOL helper
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:48:13 +08:00
VallierDevandClaude Opus 5.5 5949314e55 Experimental WOL helper (UU_WOL_HELPER=1); doctor keeps logs quiet
Mirrors the official Windows host (GameViewerServer reportLanInfo / PushMessageHandler::wakeOnLan /
send_wol): report the LAN identity after sign-in and answer wake_on_lan pushes with a magic packet
to the target's subnet broadcast. Field names come from the official log strings; off by default
and unverified end to end. wake_on_lan push key names are always logged for evidence.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:43:13 +08:00
VallierDevandClaude Opus 5.5 8389fc4eed Debian package: binaries, engine plugins, systemd user unit, menu entries
Built and install-tested in the release workflow (and CI) with dependencies taken from the
binaries by dpkg-shlibdeps. The unit starts with graphical-session.target; uinput access stays
opt-in (the udev rule ships under /usr/share/doc).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:38:39 +08:00
VallierDevandClaude Opus 5.5 b8de665593 Release v0.2.17: doctor diagnostic report
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:34:06 +08:00
VallierDevandClaude Opus 5.5 554cbe806a doctor: one paste-safe diagnostic report for issues
Session, selected backend (and the X11-inside-Wayland trap), engine plugin load results, uinput
and render-node access, FFmpeg encoders/version, the default codec, sign-in and service state.
Prints booleans, names and versions only; home directory and user name are masked. The issue
template and READMEs ask for it.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:30:01 +08:00
VallierDevandClaude Opus 5.5 a91f0024d3 Release v0.2.16: KDE idle inhibition, lock hints (#60, #61)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:16:15 +08:00
VallierDevandClaude Opus 5.5 68ad9759bd KDE idle inhibition during remote sessions; lock and X11-in-Wayland hints (#61)
- KDE portal sessions hold an org.freedesktop.ScreenSaver inhibitor while a desktop connection
  is active (GNOME keeps SessionManager.Inhibit), so the idle timeout no longer locks mid-session.
- Log a hint when the desktop locks: viewers only see black frames until it is unlocked.
- Warn when the X11 backend is selected while a Wayland session is running (XWayland root
  capture is all black without any error).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 12:12:28 +08:00
Jeff Zhangandferstar 169edf2224 inproc: pad odd native captures to even for the in-process encoder (#60)
The in-process encoder opened its context at the raw capture size, so an
odd logical desktop (e.g. two stacked 150% monitors, 2560x2507) made every
H.264/HEVC/NVENC encoder fail to open. The encoder size is now rounded up to
even, and a native capture is copied into a zeroed frame of that size so the
extra row/column stays black. Scaled output paths are unchanged.

Co-authored-by: ferstar <[email protected]>
2026-10-20 07:23:54 +08:00
VallierDevandClaude Opus 5.5 9994279b29 Release v0.2.15: aarch64 package, H.264 default on CPU hosts (#58, #59)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 01:33:23 +08:00
VallierDevandClaude Opus 5.5 6733a117a2 CPU hosts default to H.264; aarch64 release package (#59)
libx265 is about ten times slower than libx264 (15 vs 155 fps at 1080p on a 4-core Ampere A1),
so without NVENC/VAAPI the host now picks H.264 even when both sides offer H.265;
UU_VIDEO_CODEC=h265 still forces it. The release workflow builds x86_64 and aarch64 packages
(each with both engine plugins) and publishes them from a single job.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 01:28:38 +08:00
Delicious233andCodex e3cab32c75 ci: build and test on linux/arm64 (#58)
Co-authored-by: Codex <[email protected]>
2026-10-20 01:28:17 +08:00
VallierDevandClaude Opus 5.5 57e1a5d07c Release v0.2.14: Hyprland output-bound pointer and monitor switching (#57)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-20 00:33:59 +08:00
ZoranandJuanZoran d90b4bccde Hyprland: bind absolute pointer to the captured output; opt-in monitor switching (#57)
Co-authored-by: JuanZoran <[email protected]>
2026-10-20 00:33:31 +08:00
VallierDevandClaude Opus 5.5 fa7fe733a6 Release v0.2.13: Wayland and portal engines in the release package
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 22:13:27 +08:00
VallierDevandClaude Opus 5.5 65c04e796a One release package for every desktop: Wayland and portal engines as runtime plugins
The release tarball was X11 only, so Hyprland/niri and GNOME/KDE Wayland users had to build from
source (#43, #54). With --features engine-plugins the wayland and portal engines are built as
libuu-wayland.so / libuu-portal.so and dlopen'ed only when the session selects them, so X11 hosts
need none of their libraries. The wayland plugin is built on Ubuntu 22.04 with the main binary;
the portal plugin needs libei >= 1.1 and is built on 24.04 (glibc >= 2.39). Source builds without
engine-plugins keep linking the engines statically.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 22:10:11 +08:00
VallierDevandClaude Opus 5.5 3480318089 portal: say how to get a picture when the build lacks portal support (#43)
Release packages are X11 only; on GNOME/KDE Wayland auto selection picks the
portal backend, which then failed every 5 s with the opaque "portal
unavailable (code 2)".

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 19:44:13 +08:00
VallierDevandClaude Opus 5.5 949acaac30 docs: niri row, non-template unit name, uinput dedicated-group example (#55)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 16:23:52 +08:00
VallierDevandClaude Opus 5.5 22fb6783a0 Release v0.2.12: pad odd capture sizes (#53)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 14:57:29 +08:00
wen0531andwen0531 10166c66e0 video: pad odd captured frame dimensions to even (#53)
The portal backend reports the compositor's logical desktop size, which is
odd when a scaled monitor's logical extent is odd: two stacked monitors at
150% scale capture 2560x2507. H.264/HEVC 4:2:0 encoders (and NVENC's surface
allocation) reject odd dimensions, so with such a desktop every encoder
failed to open:

  [libx264] height not divisible by 2 (2560x2507)
  [h264_nvenc] InitializeEncoder failed: out of memory (10)
  ERROR Live desktop stream stopped: Encoder output ended

and the official viewer stayed on 正在传输画面 while input still worked.

Pad the odd row/column in the filter chain when the native capture size is
known and no output scaling was requested (a no-op case omitted for even
sizes). The host display mode, the reported capture size and the explicit
分辨率 scaling path are unchanged; the fixed-input probe keeps its chain.

Co-authored-by: wen0531 <[email protected]>
2026-10-19 14:57:02 +08:00
VallierDevandClaude Opus 5.5 b7f9f2aa68 Release v0.2.11: wlroots text_input (#51), proxy bypass by default (#52)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-19 10:26:55 +08:00
aresbit 6416f75b7f auth: bypass ambient proxies by default; UU_USE_PROXY=1 opts in (#52)
A local HTTP/SOCKS proxy that intercepts TLS caused login to fail with
"tls handshake eof". Build all cloud API clients with no_proxy() unless
UU_USE_PROXY is explicitly truthy, so direct connections are the default
and environments that genuinely need a proxy can still enable it.
2026-10-19 10:25:58 +08:00
70cb5ad57e Wayland/wlroots: type mobile IME text through the virtual keyboard's spare keycodes (#51)
The mobile clients' input method sends `text_input {content}` over CONTROL. Upstream only
implements it for X11, so a Wayland host (Hyprland here) dropped the characters with a
warning. Wire it up: characters the session keymap already produces are pressed as
ordinary keycodes, and characters it cannot produce are carried by spare keycodes (the
keymap has ~33 named but unmapped ones) declared for the duration of one batch, in text
order, then removed again.

The focused client translates keycodes with the keymap the compositor last handed it, and
a keymap uploaded to a keyboard the seat already has is never handed on again: measured on
Hyprland 0.56.2, pressing the remapped keycodes then reproduces the previous message's
text (a space came out as the previous message's first character, and every message
repeated the one before it). Re-attaching the virtual keyboard is what makes the
compositor send the keymap to the client, so each batch does that, waits for the
compositor to install the keymap, and releases held keys first because the new keyboard
starts with none. No timing sleep is needed once the keyboard is re-attached, so there is
none. Plain latin text and spaces never touch the keymap at all. The pristine keymap is
restored after every call, so uu_wl_key keeps its own symbol map and the compositor is
never left with spare keys bound.

`wayland-text-probe` reports how many characters one upload can carry and types a sample;
UU_PROBE_SEQUENCE types one message per |-separated field, the way the phone's input
method sends them, which is what reproduced this locally.

Co-authored-by: Hey Claw <[email protected]>
Co-authored-by: Claude Code <[email protected]>
2026-10-18 21:07:23 +08:00
VallierDevandClaude Opus 5.5 7fcc674440 Release v0.2.10: official device_capability shape and sender_para_info (#49)
The iPhone client ignored our flat forward_setting device_capability and kept
quality and chroma locked. Send it nested under data.device_capability with
type beside it, list the formats the encoder really produces (4:4:4 when
available), and add sender_para_info, as the official Windows host does.
Verified with the UU iPhone app 4.42.0.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 20:54:34 +08:00
VallierDevandClaude Opus 5.5 19d0563781 desktop: viewer launcher entry and window icon; explicit StartupWMClass (#13)
The viewer's GTK windows had no icon and no desktop entry, so docks showed a
generic icon next to the host's. Add uu-remote-linux-viewer.desktop and use the
host icon for viewer windows.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-18 17:25:14 +08:00
273 changed files with 42352 additions and 1664 deletions

No files matched your search

+6 -4
View File
@@ -32,11 +32,12 @@ body:
attributes:
label: 诊断信息 / Diagnostics
description: |
先复现一次问题,然后在被控的 Linux 上运行下面的命令,把输出粘贴到这里(IP 会被自动抹掉,不包含密码、令牌或剪贴板内容)。
Reproduce the problem, then run this on the Linux host and paste the output (IPs are masked; no passwords, tokens or clipboard data).
先复现一次问题,然后在被控 Linux 的**图形桌面里打开的终端**中运行下面的命令(SSH 或 tty 里缺少桌面环境变量,doctor 结果不准),把输出粘贴到这里(IPv4/IPv6/MAC 地址会被自动抹掉,不包含密码、令牌或剪贴板内容)。
Reproduce the problem, then run this in a terminal **inside the Linux graphical session** (SSH/tty lacks the desktop environment, so doctor would be misleading) and paste the output (IPv4/IPv6/MAC addresses are masked; no passwords, tokens or clipboard data).
```sh
{
echo "== doctor (v0.2.17+)"; uuremote-server doctor
echo "== 系统"; grep PRETTY_NAME /etc/os-release; uname -rm
echo "== 桌面"; echo "session=$XDG_SESSION_TYPE desktop=$XDG_CURRENT_DESKTOP"
echo "== 显示器"; xrandr --listmonitors 2>/dev/null
@@ -44,8 +45,9 @@ body:
echo "== 显卡"; lspci 2>/dev/null | grep -iE 'vga|3d'
echo "== FFmpeg"; ffmpeg -hide_banner -encoders 2>/dev/null | grep -E 'h264_nvenc|libx264'
echo "== 日志"; journalctl --user -u uuremote-native.service --since "-30min" --no-pager -o cat \
| grep -E 'Starting|backend|Selected capture|Desktop encoder|Capture setting request|Desktop video settings|Offer for connection|WARN|ERROR' | tail -n 80
} 2>&1 | sed -E 's/[0-9]{1,3}(\.[0-9]{1,3}){3}/x.x.x.x/g'
| grep -E 'Starting|backend|Selected capture|Desktop encoder|Capture setting request|Desktop video settings|Offer for connection|PeerConnection State|Remote controller disconnected|ICE path|Port mapping|WARN|ERROR' \
| grep -vE 'webrtc_ice|webrtc_dtls|webrtc::mux' | tail -n 120
} 2>&1 | sed -E 's/[0-9]{1,3}(\.[0-9]{1,3}){3}/x.x.x.x/g; s/([0-9a-fA-F]{1,4}:){4,7}[0-9a-fA-F]{1,4}|[0-9a-fA-F]{0,4}::[0-9a-fA-F:]*[0-9a-fA-F]/x:x::x/g'
```
render: text
validations:
+83 -4
View File
@@ -24,10 +24,49 @@ jobs:
run: |
sudo apt-get update
sudo apt-get install -y build-essential pkg-config \
libx11-dev libxext-dev libxtst-dev libxfixes-dev libgtk-3-dev
libx11-dev libxext-dev libxtst-dev libxfixes-dev libgtk-3-dev \
libwayland-dev libwayland-bin libxkbcommon-dev xvfb xauth fonts-noto-cjk
- uses: dtolnay/rust-toolchain@stable
- uses: Swatinem/rust-cache@v2
- run: cargo test --locked
- name: GTK appearance and settings smoke tests
run: xvfb-run -a -s '-screen 0 1600x1200x24' sh tests/gtk-ui-smoke.sh "$RUNNER_TEMP/gtk-ui-previews"
- name: Synthetic GTK previews
if: always()
uses: actions/upload-artifact@v4
with:
name: gtk-ui-previews
path: ${{ runner.temp }}/gtk-ui-previews
if-no-files-found: ignore
# Same as the release job: the wayland plugin is built on 22.04; libei is unavailable here, so
# the portal plugin is skipped with a warning (release builds it on 24.04).
- name: Release feature set
run: |
cargo build --locked --features wayland,portal,engine-plugins --bin uuremote-server
test -f target/debug/libuu-wayland.so
- name: Debian package installs
run: |
packaging/deb/build-deb.sh 0.0.0~ci target/debug /tmp/deb
dpkg-deb -I /tmp/deb/*.deb | grep -E 'Depends|Recommends'
sudo apt-get install -y /tmp/deb/*.deb
uuremote-server --help | head -1
test -f /usr/lib/uu-remote-linux/libuu-wayland.so
systemd-analyze verify /usr/lib/systemd/user/uuremote-native.service
# The tarball installer must bring FFmpeg back on a machine without it (no FFmpeg = no picture).
- name: Tarball install script
run: |
shellcheck packaging/tarball/install.sh
sudo apt-get remove -y ffmpeg || true
if command -v ffmpeg; then echo "ffmpeg still present"; exit 1; fi
pkg=$(mktemp -d)
cp target/debug/uuremote-server target/debug/libuu-wayland.so packaging/tarball/install.sh "$pkg/"
cp -r contrib "$pkg/"
home=$(mktemp -d)
HOME=$home XDG_CONFIG_HOME=$home/.config "$pkg/install.sh" --yes
ffmpeg -hide_banner -encoders | grep -qw libx264
test -x "$home/.local/bin/uuremote-server" && test -f "$home/.local/lib/uu-remote-linux/libuu-wayland.so"
grep -q '^ExecStart=%h/.local/bin/uuremote-server$' "$home/.config/systemd/user/uuremote-native.service"
HOME=$home XDG_CONFIG_HOME=$home/.config "$pkg/install.sh" --yes | grep -q 'Kept existing'
test-viewer:
runs-on: ubuntu-22.04
@@ -56,12 +95,18 @@ jobs:
- uses: dtolnay/rust-toolchain@stable
- uses: Swatinem/rust-cache@v2
- run: cargo test --locked --features wayland,portal
# Release layout: engines as runtime-loaded plugins; uuremote-server must not link them.
- name: Engine plugins
run: |
cargo build --locked --features wayland,portal,engine-plugins --bin uuremote-server
for lib in libuu-wayland.so libuu-portal.so; do test -f "target/debug/$lib"; done
! readelf -d target/debug/uuremote-server | grep NEEDED | grep -E 'libei|libpipewire|libwayland-client|libxkbcommon'
- name: Native portal and EIS regression tests (ASan/UBSan)
env:
ASAN_OPTIONS: detect_leaks=1
UBSAN_OPTIONS: halt_on_error=1
run: |
for source in tests/portal_engine.c tests/portal_input.c tests/portal_eis.c tests/desktop_power.c; do
for source in tests/portal_engine.c tests/portal_dmabuf.c tests/portal_input.c tests/portal_eis.c tests/desktop_power.c tests/wayland_transform.c; do
target="/tmp/$(basename "$source" .c)"
cc -O1 -g -fsanitize=address,undefined -fno-omit-frame-pointer \
-Wall -Wextra -Wno-unused-parameter "$source" -o "$target" \
@@ -73,12 +118,46 @@ jobs:
runs-on: ubuntu-24.04
steps:
- uses: actions/checkout@v4
- name: Install build dependencies (X11 + FFmpeg 6 for the inproc-av feature)
- name: Install build dependencies (X11; inproc-av vendors the NVENC headers; the VAAPI/DRI3 engines need libva/gbm/xcb-dri3 headers, libva itself is dlopen'ed at runtime)
run: |
sudo apt-get update
sudo apt-get install -y build-essential pkg-config \
libx11-dev libxext-dev libxtst-dev libxfixes-dev libgtk-3-dev \
libavcodec-dev libavformat-dev libavdevice-dev libswscale-dev libclang-dev
libva-dev libgbm-dev libx11-xcb-dev libxcb-dri3-dev libxcb-damage0-dev \
libpulse-dev libopus-dev xvfb xauth \
libwayland-dev libxkbcommon-dev libglib2.0-dev libpipewire-0.3-dev libei-dev
- uses: dtolnay/rust-toolchain@stable
- uses: Swatinem/rust-cache@v2
- name: Read-only uinput text keymap regression
run: |
cc -O1 -g -fsanitize=address,undefined -fno-omit-frame-pointer \
-Wall -Wextra tests/uinput_keymap.c -o /tmp/uu-uinput-keymap-test -lX11
ASAN_OPTIONS=detect_leaks=1 UBSAN_OPTIONS=halt_on_error=1 \
xvfb-run -a /tmp/uu-uinput-keymap-test
- run: cargo test --locked --features inproc-av
- run: cargo test --locked --features inproc-av,wayland,portal
test-linux-arm64:
# aarch64 hosts (Ampere A1, arm64 VMs, Apple-silicon VMs) build from source, so keep that
# build honest on a native arm64 runner instead of letting it rot between releases.
runs-on: ubuntu-24.04-arm
steps:
- uses: actions/checkout@v4
- name: Install build dependencies
run: |
sudo apt-get update
sudo apt-get install -y build-essential pkg-config \
libx11-dev libxext-dev libxtst-dev libxfixes-dev libgtk-3-dev \
libwayland-dev libwayland-bin libxkbcommon-dev libglib2.0-dev libpipewire-0.3-dev libei-dev
- uses: dtolnay/rust-toolchain@stable
- uses: Swatinem/rust-cache@v2
- run: cargo test --locked
- name: Release binary
run: |
cargo build --locked --release --bin uuremote-server
file target/release/uuremote-server
# The aarch64 release package ships both engine plugins.
- name: Release feature set
run: |
cargo build --locked --features wayland,portal,engine-plugins --bin uuremote-server
for lib in libuu-wayland.so libuu-portal.so; do test -f "target/debug/$lib"; done
+72 -8
View File
@@ -9,35 +9,99 @@ permissions:
packages: write
jobs:
release:
# Built on 22.04 so the binary also runs on Ubuntu 22.04/24.04 and newer Debian (glibc >= 2.35).
runs-on: ubuntu-22.04
# GNOME/KDE Wayland engine: libei >= 1.1 first ships in Ubuntu 24.04, so this plugin needs
# glibc >= 2.39. It is only loaded on portal sessions; X11 and wlroots hosts never open it.
portal-plugin:
strategy:
matrix:
include:
- { arch: x86_64, runner: ubuntu-24.04 }
- { arch: aarch64, runner: ubuntu-24.04-arm }
runs-on: ${{ matrix.runner }}
steps:
- uses: actions/checkout@v4
- name: Install build dependencies
run: |
sudo apt-get update
sudo apt-get install -y build-essential pkg-config \
libx11-dev libxext-dev libxtst-dev libxfixes-dev libgtk-3-dev libsdl2-dev
libx11-dev libxext-dev libxtst-dev libxfixes-dev libglib2.0-dev libpipewire-0.3-dev libei-dev
- uses: dtolnay/rust-toolchain@stable
- run: UU_NO_GTK=1 cargo build --release --locked --features portal,engine-plugins --bin uuremote-server
- uses: actions/upload-artifact@v4
with:
name: libuu-portal-${{ matrix.arch }}
path: target/release/libuu-portal.so
build:
needs: portal-plugin
strategy:
matrix:
include:
- { arch: x86_64, runner: ubuntu-22.04 }
- { arch: aarch64, runner: ubuntu-22.04-arm }
# Built on 22.04 so the binary also runs on Ubuntu 22.04/24.04 and newer Debian (glibc >= 2.35).
runs-on: ${{ matrix.runner }}
steps:
- uses: actions/checkout@v4
- name: Install build dependencies
run: |
sudo apt-get update
sudo apt-get install -y build-essential pkg-config \
libx11-dev libxext-dev libxtst-dev libxfixes-dev libgtk-3-dev libsdl2-dev \
libwayland-dev libwayland-bin libxkbcommon-dev
- uses: dtolnay/rust-toolchain@stable
- run: cargo test --release --locked
- run: cargo build --release --locked
# Experimental viewer; built after the host so uuremote-server keeps the default features.
# One package for every desktop: Wayland (wlroots) and GNOME/KDE portal engines are plugins
# opened at runtime (engine-plugins), so X11 hosts need none of their libraries.
- run: cargo build --release --locked --features wayland,portal,engine-plugins
- uses: actions/download-artifact@v4
with:
name: libuu-portal-${{ matrix.arch }}
path: target/release
# Experimental viewer; built after the host so uuremote-server keeps the release features.
- run: cargo build --release --locked --features native-viewer,viewer-sdl --bin uuremote-viewer
- name: Package
run: |
name=uu-remote-linux-${GITHUB_REF_NAME}-x86_64-linux
name=uu-remote-linux-${GITHUB_REF_NAME}-${{ matrix.arch }}-linux
mkdir -p "$name"
cp target/release/uuremote-server target/release/uuremote-viewer LICENSE README.md README.en.md config.example.json "$name/"
cp target/release/uuremote-server target/release/uuremote-viewer target/release/libuu-wayland.so target/release/libuu-portal.so \
packaging/tarball/install.sh LICENSE README.md README.en.md config.example.json "$name/"
cp -r contrib "$name/"
tar czf "$name.tar.gz" "$name"
sha256sum "$name.tar.gz" > "$name.tar.gz.sha256"
- name: Debian package
run: |
packaging/deb/build-deb.sh "${GITHUB_REF_NAME#v}" target/release .
deb=$(ls uu-remote-linux_*.deb)
sha256sum "$deb" > "$deb.sha256"
sudo apt-get install -y "./$deb"
uuremote-server --help | head -1
systemd-analyze verify /usr/lib/systemd/user/uuremote-native.service
- uses: actions/upload-artifact@v4
with:
name: package-${{ matrix.arch }}
path: |
uu-remote-linux-*.tar.gz*
uu-remote-linux_*.deb*
# One publisher, so the matrix legs never race to create the release.
release:
needs: build
runs-on: ubuntu-22.04
steps:
- uses: actions/checkout@v4
- uses: actions/download-artifact@v4
with:
pattern: package-*
merge-multiple: true
- uses: softprops/action-gh-release@v2
with:
body_path: docs/release-notes/${{ github.ref_name }}.md
files: |
uu-remote-linux-*.tar.gz
uu-remote-linux-*.tar.gz.sha256
uu-remote-linux_*.deb
uu-remote-linux_*.deb.sha256
# Headless NAS image (docker/), built from the release tarball published by the job above.
docker:
+58 -22
View File
@@ -29,7 +29,10 @@ This file is written for large language model agents (Claude Code, Codex, Cursor
the config file / environment. The only built-in default is the public client signing key in `src/auth.rs`.
6. **Don't break other tools.** The desktop, file-transfer, terminal and port-mapping tools each open their own
peer connection; a new offer must never close other peers.
7. Keep changes small and tested; match the surrounding code style (dense, comment only the non-obvious).
7. **UI text is bilingual.** Every user-facing string has Chinese and English: `L("中文", "English")` in C
(`c_engine/i18n.h`), `crate::i18n::s(..)` / `crate::tr!(..)` in Rust (`src/i18n.rs`; `UU_LANG`, saved choice, locale).
Logs stay English.
8. Keep changes small and tested; match the surrounding code style (dense, comment only the non-obvious).
## 3. Build and test
@@ -38,8 +41,13 @@ Dependencies (Ubuntu/Debian):
```sh
sudo apt install build-essential pkg-config \
libx11-dev libxext-dev libxtst-dev libxfixes-dev libavcodec-dev libavformat-dev libavdevice-dev libswscale-dev libclang-dev libgtk-3-dev ffmpeg
# --features inproc-av: libavcodec-dev libavformat-dev libavdevice-dev libswscale-dev libclang-dev
# (FFmpeg 6.x; in-process capture/encoding, Ubuntu 24.04 ships it)
# --features inproc-av: X11 in-process capture + native NVENC/VAAPI. NVENC headers are vendored and
# libcuda/libnvidia-encode dlopen'ed at runtime (NVENC API 12.1, driver >= 530).
# The VAAPI/DRI3 engines compile against
# libva-dev libgbm-dev libx11-xcb-dev libxcb-dri3-dev libxcb-damage-dev;
# libva/libva-drm themselves are dlopen'ed at runtime (no hard libva dependency)
# --features viewer-ffmpeg: libavcodec-dev libavformat-dev libavdevice-dev libswscale-dev libclang-dev
# (FFmpeg 6.x only. FFmpeg >= 7 fails in ffmpeg-sys-next with "avfft.h file not found")
# --features wayland: libwayland-dev libxkbcommon-dev wl-clipboard
# --features wayland,portal: + libglib2.0-dev libpipewire-0.3-dev libei-dev (libei >= 1.1)
```
@@ -68,6 +76,9 @@ cargo build --release --features native-viewer,viewer-sdl --bin uuremote-viewer
X11 → default build. Hyprland → `--features wayland`. GNOME/KDE on Wayland → `--features wayland,portal`
(or advise the user to pick the "on Xorg" session at the login screen, which is the best-supported path).
2. Install dependencies and build (section 3). Copy the binary: `install -Dm755 target/release/uuremote-server ~/.local/bin/uuremote-server`.
From a release tarball run its `./install.sh` as the desktop user instead: it installs into `~/.local`, writes the user unit
(keeps an existing one) and installs FFmpeg with libx264 via sudo apt/pacman when missing (Fedora/openSUSE: prints the command).
The .deb depends on `ffmpeg`. Without FFmpeg the viewer waits on 正在传输画面; the host checks at startup and on each desktop offer, logs an error and tells the desktop user (freedesktop notification, else opens its window with a red line; `assist::show_problem`).
3. **Login (needs the human).** Run `uuremote-server login` inside the graphical session. A GTK window shows a QR
code; the user scans it with the UU Remote mobile app and confirms. Without a display use
`uuremote-server login --no-gui` (terminal QR). Credentials are written to `~/.config/uuremote/config.json`
@@ -78,17 +89,21 @@ cargo build --release --features native-viewer,viewer-sdl --bin uuremote-viewer
[Unit]
Description=UU Remote Linux host (unofficial)
After=graphical-session.target
PartOf=graphical-session.target
[Service]
Environment=RUST_LOG=info
Environment=DISPLAY=:0
# GNOME on Xorg usually needs: Environment=XAUTHORITY=/run/user/<uid>/gdm/Xauthority
ExecStart=%h/.local/bin/uuremote-server
Restart=always
RestartSec=5
[Install]
WantedBy=default.target
WantedBy=graphical-session.target
```
Same as packaging/deb. GNOME/KDE import DISPLAY / WAYLAND_DISPLAY and start graphical-session.target; do not hard-code
DISPLAY there (it overrides the session's real one, XWayland is often :1); under default.target the unit can
start before WAYLAND_DISPLAY is imported and fall back to X11. Desktops without that target (Xfce, i3) and the Xvfb
virtual desktop need `WantedBy=default.target` plus an explicit `Environment=DISPLAY=...`; headless
(`UU_DESKTOP_BACKEND=none` + linger) needs `WantedBy=default.target` only (GNOME on Xorg outside the session: `XAUTHORITY=/run/user/<uid>/gdm/Xauthority`).
Find the real display/Xauthority with `loginctl show-session <id> -p Display` / `ps -o args -C Xorg`.
5. `systemctl --user daemon-reload && systemctl --user enable --now uuremote-native.service`
6. Verify: `journalctl --user -u uuremote-native.service -f` must show
@@ -105,21 +120,29 @@ viewer does not reconnect them automatically.
| Item | Meaning |
|---|---|
| `~/.config/uuremote/config.json` | user_id, device_id, client_id, system_id, machine_guid, token, csrf; optional `sign_key`, `ffmpeg_root`. `$UU_CONFIG` overrides the path |
| `~/.config/uuremote/host_settings.json` | persisted 安全 settings: auto_lock, keep_mute, mute_permanent |
| `~/.config/uuremote/host_settings.json` | persisted 安全 settings: auto_lock, keep_mute, mute_permanent; optional `video_encoder` (`auto`/`cpu`/`vaapi`/`nvenc`) and `video_codec` (`auto`/`h264`/`h265`), written by `set-encoder` / `set-codec` (0600, merge write). Non-`auto` beats `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`. `set-encoder` and `set-codec` both send `SIGUSR2` to the pid in `host.pid` (same binary). Live desktop streams restart the encoder (`EncoderTask::restart`, sequence kept, first frame IDR) without dropping the peer. Codec preference is logged and applies on the next desktop stream. `SIGUSR2` does not re-probe. Hand edits: `kill -USR2 $(cat ~/.config/uuremote/host.pid)` |
| `UU_DESKTOP_BACKEND` | `auto` (default) / `x11` / `wayland` / `portal` / `kms` (experimental feature) / `none` (headless: no display; desktop offers ignored; tool peers get a nominal 1920x1080 screen + Allow permissions, which the port-mapping viewer requires) |
| `UU_X11_MULTISCREEN=1`, `UU_X11_OUTPUT` | X11: advertise each RandR monitor (`xrandr --listmonitors`, read once at start; primary or `UU_X11_OUTPUT` is id 0) through the same screen-switch path as `UU_WAYLAND_MULTISCREEN` (`wayland::outputs`/`select`). x11grab reads `display+x,y` at the monitor size, XTest/uinput absolute input adds the monitor offset, the in-process engine and `desktop_mode` resize are skipped (分辨率 scales). Needs two or more monitors |
| `UU_DESKTOP_RESIZE=0` | X11: the viewer's 分辨率 choice scales the encoded stream instead of changing the display mode. Default: `src/desktop_mode.rs` switches the primary output via xrandr (adds a CVT-RB mode when missing, re-applies once if mutter resets it), restores the original mode for resolution_type 3 and 2 s after the last desktop stream ends |
| `UU_NVENC_RGB=0` / `=1` | NVENC 4:2:0 without scaling takes packed BGRA/BGR0 directly (no CPU swscale). Default: on, except when a connected DRM connector belongs to an nvidia-bound card (desktop composited on the encoding GPU; #16 measured 82.6 vs 98 fps at 4K). `0` forces CPU conversion, `1` forces the direct path |
| `UU_TOUCH_INPUT` | Android/iOS controllers (connect header `controller_platform` 2/3) send a finger as a left-button drag at absolute positions. Default on the portal backend (gesture): per press, moving past 12 px within 450 ms scrolls (`NotifyPointerAxis` / EIS scroll, content follows the finger, `finish` on release), holding still selects with button 1 down, a short press clicks; needs no touchscreen consent. `touch`: replay as one finger on the portal touchscreen (`NotifyTouch*` / EIS touch; requested where `AvailableDeviceTypes` offers it; consents saved before touch support restore keyboard+pointer only, so the first mobile drag asks once per run in the background via `PortalSession::upgrade_touch`, swapped in only with the touchscreen granted for the same monitor; the saved consent is never removed first). `0`: plain mouse drags |
| `UU_INPUT_BACKEND` | `auto` (uinput on Wayland/portal when `/dev/uinput` is accessible, udev `uaccess` rule in README) / `uinput` / `native`. X11 keeps XTest (held-key autorepeat handling) |
| Mac viewer Cmd | With 「使用 macOS 快捷键」 off the Mac viewer sends Cmd=VK_LWIN 0x5B, Option=0xA4, Ctrl=0xA2; connect header `controller_platform`=4 is macOS. For Mac controllers Cmd is held back: Cmd+C/V/A/F/X/Z → Ctrl+key (terminal: Cmd+C/V → Ctrl+Shift+C/V), other combos/alone → Super |
| `UU_TERMINAL_SHORTCUTS=0` | disable Ctrl+V → Ctrl+Shift+V in focused X11 terminals (Mac Cmd and Ctrl both arrive as VK_LCONTROL) |
| `contrib/virtual-desktop/` | Xvfb + session (`UU_VIRTUAL_SESSION`, `UU_VIRTUAL_BUS=user|private`) for monitorless hosts; serve it with `DISPLAY=:99` |
| `UU_VIDEO_ENCODER` | `cpu`: libx264; `vaapi`: explicit Intel/AMD; `nvenc`: force; unset: NVENC→CPU only if `/proc/driver/nvidia/version` or `/dev/nvidia0` exists, else CPU (#10) |
| `UU_VIDEO_CODEC=h264` | force H.264 even when the viewer negotiated H.265 (default: H.265 when both sides support it) |
| `UU_VIDEO_ENCODER` | `cpu`: libx264; `vaapi`: explicit Intel/AMD; `nvenc`: force; unset/`auto`: background probe, one synthetic IDR per candidate, 3 s each. While #33 is open, auto is NVENC then CPU when `/proc/driver/nvidia/version` or `/dev/nvidia0` exists; with no NVIDIA the only candidate is CPU and the probe is skipped. A session that starts before the probe finishes uses the legacy rule (NVENC if NVIDIA is present, else CPU). On `--features inproc-av`, a process-only failure of NVENC when the native engine would try it first on X11 is `native_unprobed` and keeps that legacy NVENC choice (Wayland, portal, and KMS fall back to CPU). The skipped CPU-only probe is logged `not probed (only candidate)`. A successful probe and that CPU-only skip stay cached while NVIDIA presence (`/proc/driver/nvidia/version` or `/dev/nvidia0`) matches the report. A later desktop connection whose presence differs treats the report as stale and starts one background re-probe (`warm_auto_probe`, non-blocking, one at a time) and still uses the cached encoder. A hardware-candidate failure (NVENC failed, chosen CPU) is cached for 10 minutes (`PROBE_FAILURE_TTL`); the next desktop connection after that starts the same re-probe and still uses the cached encoder. Explicit `cpu` / `vaapi` / `nvenc` (setting file or `UU_VIDEO_ENCODER`) does not start the probe. A later success selects NVENC again; another failure restarts the 10 minutes. `native_unprobed` is not a failure cache. Ignored when `host_settings.json` `video_encoder` is not `auto`. Explicit `vaapi` with 真彩 encodes 4:2:0 and reports that in CaptureSettingSync (field 3). VAAPI is not an auto candidate until #33 |
| `UU_VIDEO_CODEC=h264` | force H.264 even when the viewer negotiated H.265 (default: H.265 when both sides support it and the encoder is hardware). Same precedence as the encoder: setting file, then this variable, then auto |
| `UU_FFMPEG_ROOT` | FFmpeg prefix (`bin/ffmpeg`, libs in `lib/x86_64-linux-gnu`) |
| `UU_AUDIO=0`, `UU_AUDIO_SOURCE` | disable sound / choose the Pulse source (default `@DEFAULT_MONITOR@`) |
| `UU_LOGIN_WINDOW=0` | don't auto-open the login window |
| `UU_ENGINE_DIR` | directory holding `libuu-wayland.so` / `libuu-portal.so` (`--features engine-plugins`, used by release packages: engines are dlopen'ed only on Wayland sessions; also searched next to the binary, `../lib/uu-remote-linux`, `~/.local/lib/uu-remote-linux`, `/usr/lib/uu-remote-linux`) |
| `UU_WOL_HELPER=1` | experimental: report LAN info (`api-ipv4…/api/v1/device/wake_on_lan/info` {mac, ip, subnet_mask}) after sign-in and answer `wake_on_lan` pushes (`target_device` {mac, ip, subnet_mask}) with a magic packet, like the official Windows host (field names from its log strings; not verified end to end). `wake_on_lan` push key names are always logged |
| `UU_USE_PROXY=1` | honor HTTP/HTTPS proxy env vars for REST and WebSocket signaling, and also gather TURN relays over TCP/TLS through that proxy (`vendor/webrtc-ice/PATCHES.md`; chain-verified, name mismatch tolerated for IP TURN URLs); clients bypass env proxies by default |
| `UU_REMOTE_ASSIST=0`, `UU_ASSIST_ALLOW=1`, `UU_ASSIST_UI=tty`, `UU_ASSIST_DEBUG=1` | disable assistance / allow at start / terminal UI for `assist` / include the server's short error message in assist errors |
Token has no expiry field; API code 1120 (HTTP 422) means invalid/expired → re-login. The config is re-read
every 60 s.
Token has no expiry field; API code 1120 (HTTP 422) means invalid/expired → re-login. `config.json` is parsed once
(`config::file()`); only a `LoginExpired` room answer re-reads it from disk (`config::read_fresh()`) before waiting
for a new QR login.
## 6. Code map
@@ -137,20 +160,24 @@ every 60 s.
| `src/clipboard*.rs` | text clipboard bridge and protocol |
| `src/file_trans.rs` | FileTransferFtp RPC |
| `src/terminal.rs` | TERM frames + PTY sessions |
| `src/privacy_screen/`, `c_engine/privacy_wallpaper.c` | host privacy screen (RPC 7): desktop-independent controller, recovery record, guard and cover processes; `Backend` per desktop (`kde/`: KWin virtual output, kscreen-doctor, KWin input devices). See docs/privacy-screen.md |
| `src/session_lock.rs`, `c_engine/pam_check.c` | lock state reporting, auto unlock via PAM + logind |
| `src/system_actions.rs`, `src/system_metrics.rs` | SimpleAction system commands, mute, auto-lock, SystemMetrics |
| `src/initialization.rs`, `src/control_protocol.rs`, `src/protocol.rs` | protobuf encoders/decoders for CONTROL |
| `src/session_ice.rs`, `src/network_diagnostics.rs` | cloud ICE servers, address-free path diagnostics |
| `src/desktop_backend.rs`, `src/wayland.rs`, `src/portal*.rs` | backend selection, Hyprland, GNOME/KDE portal |
| `src/engine_plugin.rs` | `engine_ffi!`: engine C functions linked statically, or dlsym-resolved from runtime plugins with `engine-plugins` |
| `c_engine/portal_eis.inc` | scaled GNOME input through the existing Portal session's EIS connection; all input must use EIS once connected |
| `c_engine/x11_engine.c`, `c_engine/clipboard.c` | X11 capture/input/selection |
| `c_engine/wayland_engine.c`, `c_engine/portal_engine.c` | Wayland and portal engines |
| `src/assist.rs`, `c_engine/assist_window.c` | remote assistance (guest + account) and the unified GTK main window (assist + account/QR card) |
| `src/viewer_main.rs`, `src/viewer/` | experimental viewer (`--features native-viewer,viewer-sdl`): cloud join, WebRTC offer side, SDL desktop window (ffmpeg CLI decode), files/terminal/portmap/power/assist tools, device removal (`POST /api/v1/device/{id}/unbind`, verified live; shared devices use `/api/v1/device/share/{id}/unbind`, strings only), GTK launcher |
| `c_engine/viewer_window.c`, `c_engine/viewer_tools.c` | viewer GTK launcher and tool windows (files, port mapping, terminal list) |
| `src/viewer/hud.rs` | in-window chrome drawn on the SDL canvas: loading screen, control center (Ctrl+Alt+M; capture settings RPC 2 and SimpleActions 14/16/18/19 as the official viewer sends them), network-status panel (Ctrl+Alt+G); fontconfig font via ab_glyph |
| `src/viewer/thumbs.rs`, `src/viewer/host.rs` | launcher device previews (last picture, local 0600 cache); viewer sign-in keeps the local host user service running so the machine joins the account's device list |
Diagnostic subcommands: `login [--no-gui]`, `unlock-check` (password on stdin, prints only accepted/rejected),
`desktop-probe [new.png]`, `desktop-video-probe` (`UU_PROBE_FPS`, `UU_PROBE_FRAMES`, `UU_PROBE_QUALITY` 1-5 = viewer bitrate preset, 5 auto; `UU_PROBE_INPUT` fixed video/image sequence, `UU_PROBE_LOOP=1` repeats), `wayland-input-probe`, `clipboard-acceptance`,
Diagnostic subcommands: `doctor` (paste-safe report: session, selected backend, engine plugins, uinput, encoder and codec with source, sign-in/service state; booleans and names only), `set-encoder auto|cpu|vaapi|nvenc` and `set-codec auto|h264|h265` (both notify a running host with SIGUSR2; live encoder switch, negotiated codec unchanged, codec preference on the next desktop stream; illegal values exit 2), `login [--no-gui]`, `unlock-check` (password on stdin, prints only accepted/rejected),
`desktop-probe [new.png]`, `desktop-video-probe` (`UU_PROBE_FPS`, `UU_PROBE_FRAMES`, `UU_PROBE_QUALITY` 1-5 = viewer bitrate preset, 5 auto; `UU_PROBE_CHROMA=444` 真彩; `UU_PROBE_INPUT` fixed video/image sequence, `UU_PROBE_LOOP=1` repeats), `wayland-input-probe`, `clipboard-acceptance`,
`portal-acceptance`, `help`. Unknown arguments exit with code 2. Builds up to v0.1.0 did **not** reject them and
started a second full host server instead, so check that a subcommand exists in the binary you run.
@@ -173,7 +200,7 @@ started a second full host server instead, so check that a subcommand exists in
5 Auto, 6 Custom. Resolution: 16/17 pixel size or 5/6, 10 resolution_type (3 = follow remote).
Field 7 `chorma_format` (ChromaFormat 1 = 4:2:0, 3 = 4:4:4) is sent when 真彩 is toggled; ff_capture_setting versions
are cumulative (3 CHROMA_SAMPLING, 4 CUSTOM_BITRATE, 5 DPI_SCALE, 6 HDR). 4:4:4 = NVENC `high444p` / x264 `high444`
with `yuv444p`; VAAPI and inproc stay 4:2:0.
with `yuv444p`; the in-process NVENC engine uses High 4:4:4 / HEVC FRExt (AQ off); VAAPI stays 4:2:0.
Reply `RpcResponse{2 CaptureSettingResponse{}}` (no errors = applied) and send Message 25 CaptureSettingSync
(field 3 = the chroma actually encoded).
- ConnectOptions field 4 `decoder_cap_list` = DecoderCap {1 fps, 2 codec_type (1 H264, 2 H265), 3 width, 4 height,
@@ -261,16 +288,25 @@ started a second full host server instead, so check that a subcommand exists in
- Update README.md / README.en.md when user-visible features or limitations change, and add
`docs/release-notes/<tag>.md` before tagging a release.
### VAAPI (opt-in / 显式启用)
### VAAPI
`UU_VIDEO_ENCODER=vaapi` selects Intel/AMD H.264 VAAPI; `UU_VAAPI_DEVICE` defaults to
`/dev/dri/renderD128` (render-node permissions required). No automatic VAAPI selection.
Both FFmpeg process and `--features inproc-av` upload NV12 frames to a VAAPI frame pool.
`UU_VIDEO_ENCODER=vaapi` or `set-encoder vaapi` selects Intel/AMD H.264 VAAPI explicitly.
`UU_VAAPI_DEVICE` defaults to `/dev/dri/renderD128` (render-node permissions required).
Auto is NVENC then CPU when an NVIDIA driver is present, otherwise CPU. VAAPI is not an
auto candidate until #33.
The FFmpeg process pipeline uploads NV12 frames to a VAAPI frame pool. With `--features inproc-av` on X11, VAAPI
H.264/HEVC Main runs in process: a DRI3 DMA-BUF of the root (XShm upload without DRI3) goes through VPP to NV12
and VCN, with SPS/PPS(/VPS) and slice headers packed by the host as radeonsi (Mesa 26) needs; parameters follow
FFmpeg's hevc_vaapi/h264_vaapi on that driver. Accepted on AMD HawkPoint1 (Mesa 26.2.3) and Cezanne
(Mesa 26.2.5; XShm-upload and DRI3 zero-copy probes plus a full HEVC Mac-viewer session) with the official
Mac viewer (presets, fps, scaling); Intel iHD is not verified. Measured on Cezanne + RTX 3050 Ti
(1920x1200, desktop-video-probe, 300 frames): in-process VAAPI ~1.5 ms CPU/frame vs in-process NVENC
~7.1 ms vs libx264 process pipeline ~19 ms.
VBR uses the viewer bitrate preset and CQ-derived minimum QP, no B-frames, async depth 1,
AUD and the existing GOP/VFR timing. Unsupported device/driver/initialization falls back to libx264
with a warning. Accepted on Intel UHD 770 (iHD) with the default FFmpeg process pipeline and the official Mac
viewer (presets, fps, scaling, reconnect; no fallback, ~40% less CPU than libx264). AMD and the `inproc-av`
VAAPI path are not hardware-verified.
viewer (presets, fps, scaling, reconnect; no fallback, ~40% less CPU than libx264). The process pipeline on
AMD is not separately verified (AMD acceptance is the in-process engine above).
### Virtual audio / 虚拟声卡
@@ -311,8 +347,8 @@ This permission can inject into the whole seat, including lock/greeter screens.
Optional VAAPI: `intel-media-driver` (modern Intel) or `libva-mesa-driver` (AMD), `libva-utils`
for `vainfo`. Optional KMS: `libdrm`. Virtual Xfce: `xorg-server-xvfb xorg-xauth xorg-xdpyinfo
xfce4-session xfce4-panel xfdesktop xfwm4 gnome-terminal`.
Rolling Arch FFmpeg may be newer than supported `inproc-av` (FFmpeg 6.x); use the default process
pipeline or build against a separate FFmpeg 6 prefix. Do not downgrade the system FFmpeg.
Rolling Arch FFmpeg may be newer than supported `viewer-ffmpeg` (FFmpeg 6.x); build it against a separate
FFmpeg 6 prefix. Do not downgrade the system FFmpeg. The host's `inproc-av` does not link FFmpeg.
User-bus headless setup and the official Mac checklist: [virtual desktop acceptance](contrib/virtual-desktop/ACCEPTANCE.md).
### Experimental KMS / 实验后端
Generated
+38 -5
View File
@@ -2,6 +2,22 @@
# It is not intended for manual editing.
version = 4
[[package]]
name = "ab_glyph"
version = "0.2.32"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "01c0457472c38ea5bd1c3b5ada5e368271cb550be7a4ca4a0b4634e9913f6cc2"
dependencies = [
"ab_glyph_rasterizer",
"owned_ttf_parser",
]
[[package]]
name = "ab_glyph_rasterizer"
version = "0.1.10"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "366ffbaa4442f4684d91e2cd7c5ea7c4ed8add41959a31447066e279e432b618"
[[package]]
name = "adler2"
version = "2.0.1"
@@ -1440,6 +1456,15 @@ version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7c87def4c32ab89d880effc9e097653c8da5d6ef28e6b539d313baaacfbafcbe"
[[package]]
name = "owned_ttf_parser"
version = "0.25.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "36820e9051aca1014ddc75770aab4d68bc1e9e632f0f5627c4086bc216fb583b"
dependencies = [
"ttf-parser",
]
[[package]]
name = "p256"
version = "0.13.2"
@@ -2629,6 +2654,12 @@ version = "0.2.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e421abadd41a4225275504ea4d6566923418b7f05506fbc9c0fe86ba7396114b"
[[package]]
name = "ttf-parser"
version = "0.25.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d2df906b07856748fa3f6e0ad0cbaa047052d4a7dd609e231c4f72cee8c36f31"
[[package]]
name = "tungstenite"
version = "0.23.0"
@@ -2741,8 +2772,9 @@ checksum = "06abde3611657adf66d383f00b093d7faecc7fa57071cce2578660c9f1010821"
[[package]]
name = "uu-remote-linux"
version = "0.2.9"
version = "0.2.46"
dependencies = [
"ab_glyph",
"async-trait",
"base64 0.22.1",
"bytes",
@@ -2758,12 +2790,14 @@ dependencies = [
"nix 0.29.0",
"qrcode",
"rand 0.8.8",
"rcgen",
"reqwest",
"sdl2",
"serde",
"serde_json",
"sha2",
"tokio",
"tokio-rustls",
"tokio-tungstenite",
"webrtc",
"x11rb",
@@ -3008,23 +3042,24 @@ dependencies = [
[[package]]
name = "webrtc-ice"
version = "0.10.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "a1bbd6b3dea22cc6e961e22b012e843d8869e2ac8e76b96e54d4a25e311857ad"
dependencies = [
"arc-swap",
"async-trait",
"crc",
"log",
"rand 0.8.8",
"rustls-native-certs",
"serde",
"serde_json",
"stun",
"thiserror 1.0.69",
"tokio",
"tokio-rustls",
"turn",
"url",
"uuid",
"waitgroup",
"webpki-roots 1.0.9",
"webrtc-mdns",
"webrtc-util",
]
@@ -3075,8 +3110,6 @@ dependencies = [
[[package]]
name = "webrtc-srtp"
version = "0.12.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "383b0f0f73ee6cce396bdbc4d54ec661861a59eae9fc988914c1a8d82c5ac272"
dependencies = [
"aead",
"aes",
+22 -5
View File
@@ -1,6 +1,6 @@
[package]
name = "uu-remote-linux"
version = "0.2.9"
version = "0.2.46"
edition = "2021"
default-run = "uuremote-server"
authors = ["uu-remote-linux contributors"]
@@ -23,14 +23,16 @@ required-features = ["native-viewer"]
default = []
native-viewer = []
viewer-ffmpeg = ["native-viewer", "dep:ffmpeg-next"]
viewer-sdl = ["native-viewer", "dep:sdl2"]
viewer-sdl = ["native-viewer", "dep:sdl2", "dep:ab_glyph"]
wayland = []
# Experimental direct linear framebuffer capture; never enabled in release builds.
kms = []
portal = []
# In-process capture and encoding through FFmpeg 6 libraries (libavcodec/libavdevice dev packages).
# Off by default so release binaries do not link the build machine's libav.
inproc-av = ["dep:ffmpeg-next", "dep:x11rb"]
# Build the wayland/portal engines as runtime-loaded libuu-wayland.so / libuu-portal.so (release packages).
engine-plugins = []
# In-process X11 capture and NVENC encoding: vendored NVENC headers, NVIDIA driver libraries loaded at runtime.
# Other encoders keep the FFmpeg process pipeline. Off by default.
inproc-av = ["dep:x11rb"]
[dependencies]
tokio = { version = "1", features = ["full"] }
@@ -57,11 +59,26 @@ ffmpeg-next = { version = "6.1", optional = true, default-features = false, feat
x11rb = { version = "0.13", features = ["damage", "shm", "allow-unsafe-code"], optional = true }
sdl2 = { version = "0.37", optional = true, features = ["use-pkgconfig"] }
ab_glyph = { version = "0.2", optional = true }
[dev-dependencies]
# Synthetic loopback WSS certificates only; both crates already occur in Cargo.lock.
rcgen = "0.11.3"
tokio-rustls = { version = "0.26.6", default-features = false, features = ["ring", "tls12"] }
[build-dependencies]
cc = "1.0"
[patch.crates-io]
# RTP rollover counter survives delayed NACK retransmissions (vendor/webrtc-srtp/PATCHES.md).
webrtc-srtp = { path = "vendor/webrtc-srtp" }
webrtc-dtls = { path = "vendor/webrtc-dtls" }
# Larger data-channel receive buffer (see vendor/webrtc/src/data_channel/mod.rs).
webrtc = { path = "vendor/webrtc" }
# TURN over TCP/TLS through an HTTP CONNECT proxy (vendor/webrtc-ice/PATCHES.md).
webrtc-ice = { path = "vendor/webrtc-ice" }
[[bench]]
name = "nvenc_pipeline_bench"
harness = false
required-features = ["inproc-av"]
+208 -26
View File
@@ -21,7 +21,30 @@
<p align="center"><sub>Linux viewer: device list (device names redacted)</sub></p>
<p align="center"><img src="docs/images/main-window.png" width="620" alt="Host main window: remote assistance and account"></p>
<p align="center"><sub>Linux host main window: remote assistance and account (device ID, code and account redacted). The UI is in Chinese, like the official app.</sub></p>
<p align="center"><sub>Linux host main window: remote assistance and account (device ID, code and account redacted). The UI is available in Chinese and English (see [Language](#language--语言)).</sub></p>
## Appearance / 外观
Choose **System / Light / Dark** (default: System) in the viewer's **Settings → General → Appearance**, or via the gear settings button in host / tool windows.
The choice is saved to `$XDG_CONFIG_HOME/uuremote/theme` (default `~/.config/uuremote/theme`).
<p align="center"><img src="docs/images/appearance-light.png" width="360" alt="Light appearance (synthetic devices)"> <img src="docs/images/appearance-dark.png" width="360" alt="Dark appearance (synthetic devices)"></p>
## Language / 语言
The language is picked once at start, in this order:
1. `UU_LANG=en` or `UU_LANG=zh`;
2. the choice saved in the viewer's **Settings → General → 语言 / Language**
or the host main window's 语言 / Language row; stored as `~/.config/uuremote/language`, applies after a restart);
3. the locale: `LC_ALL` / `LC_MESSAGES` / `LANG` starting with `zh` → Chinese, anything else → English.
```sh
UU_LANG=en uuremote-viewer ui
UU_LANG=zh uuremote-server
```
Protocol strings and messages that come from the UU servers are shown as the server sends them.
<!-- Screenshot placeholder: the Linux desktop controlled from the official client. Take your own
screenshot, remove account/device details and NetEase logos, save it as docs/images/remote-desktop.png
@@ -45,8 +68,8 @@
| Mouse / keyboard | Absolute and relative motion, clicks, wheel, keys; no spurious key repeat on high-latency links; optional uinput virtual devices on Wayland (layout independent, see below) |
| Mac shortcuts | **Recommended**: turn off 「使用 macOS 快捷键」 (use macOS shortcuts) in the Mac viewer's remote-window menu; then Cmd+C/V/A/F/X/Z work as on a Mac (Cmd+C/V become Ctrl+Shift+C/V in terminals) and Ctrl+C always interrupts. With the option on, the viewer sends Cmd as Ctrl: in a terminal Ctrl+V / Cmd+V paste, Ctrl+C interrupts, copy is Cmd+Shift+C (X11) |
| Pointer shape | Remote cursor shape is mirrored to the viewer (X11) |
| Clipboard | Two-way text sync |
| Quality / frame rate / resolution | Auto, Original 20M, Ultra 8M, HD 2M, custom; 30/60/90/144 fps; "other resolutions" are scaled by the encoder, the host monitor is left untouched |
| Clipboard | Two-way text sync; Wayland mobile IME text inputs use clipboard paste fallback (see below) |
| Quality / frame rate / resolution | Auto, Original 20M, Ultra 8M, HD 2M, custom; 30/60/90/144 fps; on X11 a resolution choice changes the desktop resolution itself like the official Windows host (xrandr, adding the mode when missing; restored for "original" or on disconnect), `UU_DESKTOP_RESIZE=0` scales in the encoder instead; Wayland scales in the encoder |
| Sound | System audio captured from PulseAudio / PipeWire and sent as Opus |
| File transfer | Upload, download (including folders), create folder, rename, delete |
| Terminal | The official "Terminal" tool, PTY sessions, multiple sessions, rename |
@@ -73,15 +96,21 @@ authorized session. Independent file/terminal tool peers do not reset input.
| Xfce | X11 | ✅ Tested in a VM | default |
| Cinnamon / MATE | X11 | ✅ Tested in a VM | default |
| Hyprland | Wayland (native wlroots protocols) | 🧪 Experimental, tested in a VM (some features limited, see below) | `--features wayland` |
| niri | Wayland (native wlroots protocols) | 🧪 Experimental; capture, text input and portrait switching hardware-tested; other features pending (#55) | `--features wayland` |
| GNOME / KDE Plasma | Wayland (xdg-desktop-portal) | 🧪 Experimental; validation scope and limits below | `--features wayland,portal` |
The GNOME Wayland Portal/EIS path has been checked for video and mouse/keyboard input on Ubuntu 26.04, GNOME 50, with one 4K screen at 200% scale; auto unlock after a cold locked connection is verified with the official Mac and iPhone 4.42.0 viewers, while other lock recovery and reconnection still need hardware acceptance testing. Apart from that path and GNOME on X11, desktop testing has primarily used virtual machines. If something goes wrong on
real hardware, please [open an issue](../../issues) with your distribution, desktop, GPU and the relevant lines from
real hardware, please [open an issue](../../issues) with the output of `uuremote-server doctor` (v0.2.17+; session, backend,
plugins, permissions and encoders only, no account data, tokens or addresses) and the relevant lines from
`journalctl --user -u uuremote-native.service`.
Wayland limits: single screen, fixed resolution. The native Hyprland backend now pipelines two shm screencopy buffers and passes the viewer's requested fps to both capture pacing and the encoder. Actual fps remains limited by the compositor, rendering and readback (the old serial path measured about 16–22 fps at 2560x1600; the pipeline is VM-measured only, not a hardware guarantee). The portal backend does not support dynamic resolution; see below for GNOME wake and lock recovery; the clipboard syncs while the viewer's remote window has focus. On the first connection the desktop asks for "Remote Desktop / Screen Sharing"
Wayland limits: captures one screen by default; Hyprland can enable monitor switching as described below. Resolution is fixed. The native Hyprland backend now pipelines two shm screencopy buffers and passes the viewer's requested fps to both capture pacing and the encoder. Actual fps remains limited by the compositor, rendering and readback (the old serial path measured about 16–22 fps at 2560x1600; the pipeline is VM-measured only, not a hardware guarantee). The portal backend does not support dynamic resolution; see below for GNOME wake and lock recovery; the clipboard syncs while the viewer's remote window has focus. On the first connection the desktop asks for "Remote Desktop / Screen Sharing"
permission; the permission is remembered once granted.
**Touch from mobile viewers (GNOME)**: in touch mode the Android/iOS viewers send a finger as a left-button drag, which on a desktop selects text. On the portal backend the host decides per press: a finger that moves more than a few pixels within 0.45 s scrolls smoothly (`NotifyPointerAxis`; the content follows the finger, also in terminals, and the last event lets clients coast), one held still selects like a mouse drag, and a short press clicks. This needs no touchscreen consent. `UU_TOUCH_INPUT=touch` instead replays drags as one finger on the portal touchscreen, which the host requests where the portal offers it; a consent saved before touch support restores keyboard and pointer only, so the first drag then asks the host once more in the background (the GNOME share dialog, which the phone also sees; it closes after the consent timeout), and an approval for the same monitor switches to touch without reconnecting. The saved consent is never removed beforehand, and the host asks at most once per run. `UU_TOUCH_INPUT=0` keeps mouse drags.
**Mobile IME typing and clipboard on Wayland**: Mobile IME text (`text_input`) on Wayland is typed through spare keycodes on wlroots compositors. On GNOME (Portal) printable ASCII is typed as keysyms when the active input source is a Latin xkb layout (Mutter picks the key and Shift level); other text, KDE and compositors where keycodes are exhausted fall back to "system clipboard write + `Shift+Insert` (or `UU_WAYLAND_PASTE_KEY=ctrl_v`)". VTE terminals paste the PRIMARY selection on `Shift+Insert`, which is why ASCII is typed instead. **Note**: This fallback replaces the host's existing clipboard contents and may echo back to the viewer's clipboard via two-way sync; set `UU_WAYLAND_TEXT=0` to completely disable Wayland mobile text input and clipboard paste fallback.
Scaled GNOME desktops using native Portal input use EIS on the same authorized session when `ConnectToEIS` and a screen `mapping_id` are available. Each axis is mapped using the matched region and actual frame dimensions, with no fixed resolution or scale factor. This avoids scaled-coordinate rejection by `NotifyPointerMotionAbsolute`. Portal builds require libei >= 1.1. Missing EIS support retains the legacy input path and its existing scaling limitations; other initialization failures are reported and trigger session recovery. After a successful EIS connection, all input uses EIS. Capture alone and uinput do not initialize EIS; missing optional logical dimensions do not block capture. Keyboard input uses the existing Windows VK to evdev mapping. Recovery keeps the encoder frame dimensions fixed but accepts logical-size changes after scaling. On GNOME, a display-change notification enables earlier recovery when previously streaming Portal capture remains paused without a valid format for a 200 ms grace after both conditions are present. Healthy renegotiation cancels the early check; repeated notifications do not postpone the same interruption. The five-second fallback remains without a related notification. Static video and valid-format pauses do not trigger recovery. Tested while connected on Ubuntu 26.04, GNOME Wayland, one 3840x2160 display: 200% -> 166.67% -> 200%, with continuously updating video and full-screen pointer control after recovery. Switching briefly freezes and goes black before recovering; five seconds is the fallback threshold, not total recovery time. See [#35](../../pull/35) for timing measurements and validation limits. Lock recovery still needs hardware acceptance testing; multi-monitor support, live resolution changes, and rotation/reflection transforms are outside this fix's scope. Capture settings remain at protocol version 4: advertised resolutions use pixel coordinates and DPR 1; Portal logical dimensions are used only for local input mapping.
GNOME Portal CONTROL no longer waits for a consent dialog or the first video frame. It announces the selected desktop before reporting secure-desktop state and receiving the official viewer's “auto unlock host” request. The official Android viewer requires this desktop selection before entering its auto-unlock flow, so the notification must precede capture readiness; actual screen dimensions, codec information and capture permissions still follow their real readiness state. Enable auto unlock in the viewer and use the current Linux user's login password. The host verifies it with PAM, unlocks the existing GNOME session, requests display wake, and restores capture, input and clipboard through the shared Portal session. Initial consent or revoked permissions still require local approval. Reconnect if physical or logical dimensions change.
@@ -92,7 +121,7 @@ Existing screen-off and lock settings remain unchanged. Only capture recovery in
Locked black video requires FFmpeg's libx264/libx265 encoder for the negotiated H.264/H.265 codec; hardware encoding support alone does not satisfy this dependency. Encoder failures are logged explicitly. Synthetic video does not change capture permissions or advertised monitor dimensions. It pauses on unlock or unknown lock state, ends when capture is ready/rejected or the connection closes, and then hands the same video track to real capture. See [#29](../../issues/29) and [#34](../../pull/34) for the controlled experiment and validation scope.
The native Wayland backend needs `wlr-output-power-management` from the compositor to wake a turned-off screen; without it only wake is unavailable — capture and encoding are unaffected.
The native Wayland backend needs `wlr-output-power-management` from the compositor to wake a turned-off screen; without it only wake is unavailable — capture and encoding are unaffected. Display-wake failures at video startup or during streaming are logged and retried at the next interval without ending the video stream; capture, encoder and send errors retain their existing handling.
Native Wayland experiments: `UU_WAYLAND_PIPELINE=0` disables pipelining for comparison.
`UU_WAYLAND_DMABUF=1` explicitly tries dma-buf → GBM CPU mapping (off by default;
@@ -102,15 +131,27 @@ failure falls back to SHM. The virgl VM verified fallback only: successful impor
mapping and hardware acceleration remain unverified. This is not zero-copy VAAPI;
`UU_VIDEO_ENCODER=vaapi` still uploads CPU frames through FFmpeg.
### Monitor switching (experimental)
Native Wayland absolute pointer motion now targets the captured output by default, fixing multi-monitor click offsets. uinput may still handle keyboard, buttons and relative motion.
Set `UU_WAYLAND_MULTISCREEN=1` to select physical monitors from the phone client. `UU_WAYLAND_OUTPUT` chooses the initial output. Capture and absolute pointer targeting switch together across different resolutions, scales and desktop positions.
X11 sessions send all monitors as one combined picture by default. With `UU_X11_MULTISCREEN=1` the host lists the monitors from `xrandr --listmonitors`; the viewer selects one, only that region is captured, and absolute pointer positions are offset to that monitor. The primary monitor is the default; `UU_X11_OUTPUT` picks another (e.g. `HDMI-1`). The layout is read when the host starts; restart the service after changing it. In this mode the viewer's resolution setting scales the stream instead of changing the display mode. Experimental: unit tests and Xvfb virtual monitors only, not yet accepted with the official clients.
Switching reuses one video track and pauses input until the new source sends a frame. Capture/encoder failure or a first-frame timeout requests restoration of the previous source. The inventory uses `hyprctl` and supports unrotated outputs; restart the host after monitor hotplug or layout changes. Phone-side switching and clicks were tested on Omarchy / Hyprland with 2560×1440 at 125% and 1920×1080 at 133.33%.
On niri, `niri msg --json outputs` enumerates enabled monitors. Normal and 90/180/270-degree capture and pointer transforms are enabled only with `NIRI_SOCKET`; reflected transforms are excluded. Three-output switching, 90-degree portrait capture/click alignment, and mobile Chinese input into Codex were hardware-tested on CachyOS + niri. Other compositors retain their existing text path and reject rotated outputs. Restart after layout changes. The temporary printable-key text keyboard is niri-only; the Hyprland fast path and pristine-keymap restoration are unchanged.
## Not implemented / not supported
| Feature | Status |
|---|---|
| Switching between multiple monitors | In progress |
| True color (4:4:4) | Supported (v0.1.15): the default FFmpeg pipeline with NVENC / libx264 encodes H.264 High 4:4:4; VAAPI and `inproc-av` stay 4:2:0 and report that to the client |
| Switching between multiple monitors | Experimental on native niri / Hyprland Wayland and on X11 (`UU_X11_MULTISCREEN=1`); see above |
| True color (4:4:4) | Supported (v0.1.15): the default FFmpeg pipeline with NVENC / libx264 encodes H.264 High 4:4:4; `inproc-av` native NVENC encodes H.264 High 4:4:4 / HEVC FRExt; VAAPI stays 4:2:0 and reports that to the client |
| HDR | Not implemented |
| Super screen / virtual display | Not implemented |
| Privacy screen on the host | Not implemented |
| Privacy screen on the host | Experimental, KDE Plasma Wayland (portal) only; off, picture and screen-off status labels verified with Mac 4.43.0; see [docs/privacy-screen.md](docs/privacy-screen.md) |
| Microphone (viewer audio played on the host) | Not implemented (needs a virtual sound card) |
| Plugins such as the WoW queue notifier | Not supported; the client is told that no plugins exist |
| Linux login screen | The system login screen (before anyone logs in to the Linux desktop) cannot be controlled yet; use headless mode or a virtual desktop (see below). This is about the Linux login: **without a UU account** the host can now be used through remote assistance |
@@ -119,6 +160,44 @@ mapping and hardware acceleration remain unverified. This is not zero-copy VAAPI
## Installation
### 0. Prebuilt release package (recommended, x86_64 / aarch64)
**Ubuntu / Debian (v0.2.18+)**: download `uu-remote-linux_<version>_amd64.deb` (ARM64: `arm64`), then:
```sh
sudo apt install ./uu-remote-linux_<version>_amd64.deb
uuremote-server login # scan the QR code with the UU Remote app
systemctl --user enable --now uuremote-native.service # start with the graphical session
```
The deb installs the binaries, plugins, a systemd user unit and menu entries, and pulls in FFmpeg as a dependency; uinput access stays opt-in (step 5).
GNOME and KDE pass the display environment to the unit; on desktops that don't (e.g. Xfce) add `DISPLAY` as in step 4.
**Other distributions**: download `uu-remote-linux-<version>-x86_64-linux.tar.gz` (ARM64: `aarch64-linux`) from [Releases](../../releases/latest), extract it, then run as your desktop user (not root):
```sh
cd uu-remote-linux-<version>-x86_64-linux
./install.sh # --yes: don't ask; --no-ffmpeg: check only
```
The script installs the binaries and plugins under `~/.local`, writes the systemd user unit (an existing one is kept) and checks
FFmpeg with libx264 (without it the viewer stays on 正在传输画面). A missing FFmpeg is installed through sudo with apt or pacman;
Fedora needs RPM Fusion and openSUSE needs Packman first, and the script only prints the command instead of adding third-party repositories.
The host also checks FFmpeg at startup and on every desktop connection: when it is not runnable it logs an error and shows a desktop notification (without a notification daemon it opens its window with a red hint), at most every 5 minutes. Install it and reconnect; no restart is needed.
One package covers X11, wlroots compositors (Hyprland, Sway, niri) and GNOME/KDE Wayland: the backend is chosen from the
running session at startup, and the matching `libuu-*.so` is loaded only on Wayland, so X11 hosts need no Wayland libraries.
| Session | Requirements |
|---|---|
| X11 | glibc >= 2.35 (Ubuntu 22.04, Debian 12 and newer) |
| wlroots (Hyprland / Sway / niri) | the same, plus `libwayland-client` and `libxkbcommon` (present on Wayland desktops) |
| GNOME / KDE Wayland | glibc >= 2.39 (Ubuntu 24.04, Fedora 40, Debian 13 and newer), libei >= 1.1 and PipeWire |
Plugins are found next to `uuremote-server`, in `../lib/uu-remote-linux/`, `~/.local/lib/uu-remote-linux/` or
`/usr/lib/uu-remote-linux/` (`UU_ENGINE_DIR` overrides); a missing library or too old glibc is reported in the log.
Continue with step 3 (login). Other architectures: build from source below.
### 1. Dependencies (Ubuntu / Debian)
```sh
@@ -129,6 +208,10 @@ sudo apt install build-essential pkg-config \
sudo apt install libwayland-dev libxkbcommon-dev wl-clipboard
# optional: GNOME/KDE portal backend
sudo apt install libglib2.0-dev libpipewire-0.3-dev libei-dev
# optional: headers for the inproc-av VAAPI/DRI3 engines (libva itself is loaded at runtime)
sudo apt install libva-dev libgbm-dev libx11-xcb-dev libxcb-dri3-dev libxcb-damage0-dev
# In-process audio capture and Opus encoding for inproc-av
sudo apt install libpulse-dev libopus-dev
```
- A Rust toolchain is required (<https://rustup.rs>).
@@ -144,6 +227,12 @@ cargo build --release --features wayland # + Hyprland
cargo build --release --features wayland,portal # + GNOME/KDE on Wayland
```
The viewer's `viewer-ffmpeg` feature supports **FFmpeg 6.x only** (`pkg-config --modversion libavcodec` = 60.x); FFmpeg 7+ fails inside `ffmpeg-sys-next` with `avfft.h file not found` (#63).
The host's optional `--features inproc-av` encodes with hardware inside the process on X11. It does not link FFmpeg development libraries; it loads the NVIDIA driver libraries (`libcuda.so.1`, `libnvidia-encode.so.1`) at runtime for NVENC (needs a driver with NVENC API 12.1, 530 or newer) and `libva.so.2`/`libva-drm.so.2` for VAAPI. When the capture and encoder sizes match, NVENC reads the XShm buffer directly, saving one host-to-device copy; VAAPI runs in process under the same feature (DRI3 DMA-BUF zero copy, or XShm upload without DRI3, then VPP to NV12 and VCN; H.264/HEVC). CPU encoding and `UU_CAPTURE=grab` keep the FFmpeg process; if the in-process hardware session fails it falls back to the matching FFmpeg process pipeline, then to the CPU. The default build and the release packages need neither feature.
On GNOME/KDE Wayland, enable in-process encoding with `cargo build --release --features wayland,portal,inproc-av` and `set-encoder vaapi`; support is limited to Portal + VAAPI.
`UU_PORTAL_DMABUF=0` disables DMA-BUF in favor of in-process host upload; `UU_VIDEO_PIPELINE=process` restores external FFmpeg pipelines.
### 3. Log in
Run inside your graphical session:
@@ -155,6 +244,10 @@ Run inside your graphical session:
Scan the code with the **NetEase UU Remote mobile app** and confirm. Credentials are stored only on this
machine, in `~/.config/uuremote/config.json` (mode 0600).
A failed status query or the 60-second request timeout does not prove that the QR expired or that the phone confirmed login. The official-client refresh policy is unchanged: after a query error, click Refresh QR (Enter in a terminal; refresh after 60 seconds with neither a window nor a terminal). QR request diagnostics contain only the request phase, error category, elapsed time, HTTP/API status and last known scan state—not tickets, URLs or response content. A `connect` category alone does not identify a DNS, TLS or proxy cause.
The same file holds this machine's device identity (`device_id`, `client_id`, `system_id`), which reinstalls and new QR logins keep. **Do not copy `config.json` between machines or clone a second host from a snapshot/disk that includes the home directory**: two host instances with one identity, on the same or different machines, kick each other out of the room. The log then shows `Cloud room leave without peer identifier` every few seconds with reconnects, and viewers disconnect right after connecting. On a cloned or copied machine, stop the service, remove those three keys plus `token`, `csrf` and `user_id`, and run `uuremote-server login` to register a new device. A leftover instance on the same machine (for example an old `~/.local/bin/uuremote-server` started by hand) has the same effect; `uuremote-server doctor` warns when more than one host instance is running.
### 4. Run as a user service
`~/.config/systemd/user/uuremote-native.service`:
@@ -163,17 +256,17 @@ machine, in `~/.config/uuremote/config.json` (mode 0600).
[Unit]
Description=UU Remote Linux host (unofficial)
After=graphical-session.target
PartOf=graphical-session.target
[Service]
Environment=RUST_LOG=info
# X11 desktops need the display; on GNOME, XAUTHORITY is usually /run/user/<uid>/gdm/Xauthority
Environment=DISPLAY=:0
# GNOME/KDE import DISPLAY / WAYLAND_DISPLAY into the user manager and start graphical-session.target
ExecStart=%h/.local/bin/uuremote-server
Restart=always
RestartSec=5
[Install]
WantedBy=default.target
WantedBy=graphical-session.target
```
```sh
@@ -185,6 +278,10 @@ journalctl --user -u uuremote-native.service -f # online once you see availabi
If you have not logged in yet, the service opens the QR login window on your desktop.
Desktops that never start `graphical-session.target` (e.g. Xfce, i3) will not autostart this unit: change `[Install]` to
`WantedBy=default.target`, add `Environment=DISPLAY=:0` (your actual display) and `enable` again. Headless mode and the
virtual desktop below also need `default.target`.
### 5. uinput virtual keyboard/mouse on Wayland (recommended)
On Wayland (especially GNOME/KDE via the portal) the default input path needs portal consent and some keyboard layouts
@@ -200,6 +297,8 @@ sudo udevadm control --reload && sudo udevadm trigger --name-match=uinput
`uaccess` grants access only to the user sitting at the machine. `UU_INPUT_BACKEND=uinput|native` forces a backend.
X11 keeps XTest by default because it handles held keys correctly on high-latency links.
ASCII text mapping through uinput requires X11/XWayland XKB; unmappable text keeps the existing text/clipboard path.
## Remote assistance and the main window (experimental)
As in the official client, this host shows a **device ID** and a **verification code**; whoever you give them to can
@@ -225,6 +324,7 @@ Optional launcher icon:
```sh
install -Dm644 contrib/desktop/uu-remote-linux.svg ~/.local/share/icons/hicolor/scalable/apps/uu-remote-linux.svg
install -Dm644 contrib/desktop/uu-remote-linux.desktop ~/.local/share/applications/uu-remote-linux.desktop
install -Dm644 contrib/desktop/uu-remote-linux-viewer.desktop ~/.local/share/applications/uu-remote-linux-viewer.desktop
```
Verified with the official Mac viewer: guest connections, wrong-code rejection, code rotation, switching assistance off,
@@ -234,7 +334,7 @@ the same account cannot assist each other, an official restriction).
## Servers without a monitor
**Headless mode** (terminal, file transfer and port mapping only): add `Environment=UU_DESKTOP_BACKEND=none` to the
service and run `loginctl enable-linger $USER`, so the systemd user manager (with `XDG_RUNTIME_DIR` and the user D-Bus)
service, change `[Install]` to `WantedBy=default.target` (`graphical-session.target` never starts without a login), and run `loginctl enable-linger $USER`, so the systemd user manager (with `XDG_RUNTIME_DIR` and the user D-Bus)
starts at boot without a login. The viewer's remote desktop keeps showing "connecting" in this mode; that is expected.
Log in once with `uuremote-server login --no-gui` (QR in the terminal).
@@ -277,19 +377,56 @@ Common environment variables:
|---|---|
| `UU_CONFIG` | Config file path (default `~/.config/uuremote/config.json`) |
| `UU_DESKTOP_BACKEND` | `auto` / `x11` / `wayland` / `portal` / `kms` (experimental feature) / `none` (headless) |
| `UU_DESKTOP_RESIZE=0` | on X11, keep the desktop resolution and only scale the encoded stream when the viewer picks a resolution |
| `UU_NVENC_RGB=0` / `=1` | NVENC encodes BGRA directly (saves CPU). Off by default when a monitor is connected to the NVIDIA card (slower when the desktop is composited on the same GPU); `0` forces off, `1` forces on |
| `UU_WAYLAND_MULTISCREEN=1` | Enable Hyprland physical monitor switching (off by default) |
| `UU_WAYLAND_OUTPUT` | Initial native Wayland output name, e.g. `HDMI-A-1` |
| `UU_X11_MULTISCREEN=1` | Select and capture X11 monitors separately (experimental, off by default, needs `xrandr`) |
| `UU_X11_OUTPUT` | Initial X11 monitor name (`xrandr --listmonitors`); default: the primary |
| `UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1` | Native Wayland skips the virtual keyboard (e.g. Denial reserves it for its input method); keys go through uinput. Without wlr-virtual-pointer the pointer also uses uinput (#72) |
| `UU_INPUT_BACKEND` | `auto` (default: uinput on Wayland when accessible) / `uinput` / `native` |
| `UU_TERMINAL_SHORTCUTS=0` | Disable the Ctrl+V paste rewrite in terminal windows |
| `UU_VIDEO_ENCODER` | `cpu`: libx264; `vaapi`: opt-in Intel/AMD; `nvenc`: force NVENC; unset: NVENC only when an NVIDIA driver is loaded, else CPU |
| `UU_VIDEO_ENCODER` | `cpu`: libx264; `vaapi`: opt-in Intel/AMD; `nvenc`: force NVENC; unset or `auto`: a background probe (one synthetic IDR per candidate, 3 s each). With an NVIDIA driver the order is NVENC then CPU; without one the only candidate is CPU and the probe is skipped. A session that starts before the probe finishes uses the previous rule (NVENC if NVIDIA is present, else CPU). On a self-built `--features inproc-av` binary, a process-only failure of NVENC when the in-process engine would try it first on X11 is logged `native_unprobed` and keeps the previous NVENC choice (Wayland, portal, and KMS fall back to CPU). The skipped CPU-only probe is logged `not probed (only candidate)`. A successful probe and that CPU-only skip stay cached while NVIDIA presence matches the report. A later desktop connection whose presence differs starts one background re-probe and still uses the cached encoder until the new result is stored. A hardware-candidate failure (NVENC failed, CPU chosen) is kept for 10 minutes; the next desktop connection after that starts the same re-probe and still uses the cached encoder until the new result is stored. Explicit `cpu` / `vaapi` / `nvenc` does not start the probe. Another failure restarts the 10 minutes. `native_unprobed` is not a temporary failure. A non-`auto` `video_encoder` in `host_settings.json` wins. VAAPI stays out of auto until #33 |
| `UU_VAAPI_BUFFER_MS` | VAAPI VBV buffer in ms (10-1000, VAAPI only); raise it when keyframes are squeezed into a blur at high resolution |
| `UU_NVENC_BUFFER_MS` | NVENC VBV buffer in ms (10-1000, NVENC only, including the in-process engine); the default is 100-500 kbit, set `1000` when high-resolution keyframes blur and flicker once per GOP (#103) |
| `UU_FFMPEG_ROOT` | Use FFmpeg from this prefix |
| `UU_AUDIO=0` | Disable sound; `UU_AUDIO_SOURCE` picks the PulseAudio source |
| `UU_REMOTE_ASSIST=0` | Disable remote assistance (no guest assistance before sign-in either) |
| `UU_ASSIST_ALLOW=1` | Allow remote assistance at start (overrides the saved switch) |
| `UU_LOGIN_WINDOW=0` | Do not open the login window automatically when credentials are missing |
| `UU_PORT_MAPPING=0` | Disable port mapping (the official host's controlled-side switch) |
| `UU_WOL_HELPER=1` | Experimental: act as a remote-boot helper like the official Windows host — report this host's LAN info after sign-in and send a magic packet to the LAN when the cloud asks to wake a PC (not verified end to end) |
| `UU_USE_PROXY=1` | Share environment HTTP/HTTPS proxy policy between REST and host/viewer WebSocket signaling; proxies are ignored by default |
`UU_USE_PROXY=1` uses only proxy settings already available to the current process. `HTTP_PROXY` / `HTTPS_PROXY` / `ALL_PROXY` (and lowercase forms) and `NO_PROXY` follow reqwest's standard selection, with uppercase taking precedence. Signaling rejects invalid/unsupported values in the selected variables (HTTP/HTTPS only, not SOCKS), proxy URLs with paths/queries/fragments, and CGI environments that would ignore proxies; this validation is intentionally stricter than silently ignoring bad values. No matching proxy or a `NO_PROXY` match still means direct access; a selected proxy failing does not trigger direct fallback. Certificate verification remains enabled and redirects are not followed, so room authentication is not forwarded to a redirect target.
With it the host also reaches the cloud TURN relays over TCP/TLS (CONNECT through the unauthenticated `http://` proxy in `HTTPS_PROXY`/`ALL_PROXY`, or directly without one), for hosts whose UDP cannot reach the TURN servers but whose TCP/proxy can. TURN certificates are chain-verified; a name mismatch is tolerated only when the cloud-supplied TURN address is an IP (media itself is end-to-end DTLS-SRTP). Without the setting only UDP relays are used, as before. **This creates no new network access**: login, signaling and media each still need an allowed network path. Connector errors expose only fixed categories/HTTP status; do not enable dependency TRACE logs that may record URLs or authentication information.
Host settings such as "lock after remote session" and "mute host" are stored in
`~/.config/uuremote/host_settings.json`.
`~/.config/uuremote/host_settings.json`. The same file stores `video_encoder`
(`auto`/`cpu`/`vaapi`/`nvenc`) and `video_codec` (`auto`/`h264`/`h265`), written by
`uuremote-server set-encoder` and `uuremote-server set-codec` (illegal arguments exit 2).
A value other than `auto` beats `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`; `auto` or a missing
field falls through to the environment, then to auto (NVENC then CPU when an NVIDIA driver
is loaded; CPU with no probe when it is not; codec stays H.265 on hardware and H.264 on CPU).
The probe runs in the background at startup and does not delay the first picture. A success
stays cached until the process exits, except when NVIDIA presence (`/proc/driver/nvidia/version`
or `/dev/nvidia0`) no longer matches the report: the next desktop connection then starts one
background re-probe (`warm_auto_probe`) and still uses the cached encoder until the new result
is stored. An NVENC failure is kept for 10 minutes, and the next desktop connection after that
starts the same background re-probe while still using the cached encoder. `set-encoder` and
`set-codec` both send `SIGUSR2` to the host in `host.pid` when that process is this program.
An encoder change switches each live desktop stream without disconnecting and keeps the codec
negotiated for that session. A failed start follows the existing fallback (in-process, then the
FFmpeg process, then CPU). After a hand edit, `kill -USR2 $(cat ~/.config/uuremote/host.pid)`
does the same. `SIGUSR2` does not re-probe. A codec change takes effect the next time a desktop
connection starts; the running host only logs it. Explicit `vaapi` with 真彩 stays on VAAPI,
encodes 4:2:0, and reports chroma 4:2:0 in CaptureSettingSync field 3. If the chosen encoder
cannot start, the stream falls back to CPU and logs a warning. VAAPI is not an auto candidate
until #33.
Custom bitrate follows the Mbps value selected in the client; for example, 1 Mbps sets an encoder cap of 1000 kbit/s.
With external FFmpeg CPU encoding, the bitrate presets (Original / Ultra / HD / custom) use average bitrate (ABR) to avoid gray keyframes at 4K and low bitrates; Auto keeps constant rate factor (CRF).
@@ -348,7 +485,7 @@ Released under the [GPL-3.0](LICENSE): you may use, modify and redistribute it,
### H.265 / HEVC
When both sides support H.265 the host uses it (as the official host does: the host picks the codec from both
When both sides support H.265 and the host has a hardware encoder (NVENC / explicit VAAPI), the host uses it (as the official host does: the host picks the codec from both
capability lists; the official Mac viewer lists H265 first in its SDP). The first desktop connection probes a
synthetic frame and announces encoder support with CodecNegotiation. `hevc_nvenc`, `libx265` and explicit
`UU_VIDEO_ENCODER=vaapi` (`hevc_vaapi`); hardware failure falls back to software HEVC, then to H.264.
@@ -356,22 +493,36 @@ synthetic frame and announces encoder support with CodecNegotiation. `hevc_nvenc
Verified with the official Mac viewer on an RTX 3090 (hevc_nvenc, including 4:4:4) and with the official Android
viewer on Intel Alder Lake-P (iHD): 2560x1440 fully hardware-encoded, 58 fps decoded at about 10 ms. libx265 is
still not verified against a real viewer.
With CPU-only encoding the default is H.264: libx265 is about ten times slower than libx264 (measured ~15 vs ~155 fps
at 1080p on a 4-core ARM host, #59); `UU_VIDEO_CODEC=h265` forces H.265. The applied frame rate comes from the viewer's
quality/fps menu; `UU_DISPLAY_FPS` only changes the reported display refresh rate.
HEVC access units are split on RFC 7798 picture boundaries instead of AUDs: `hevc_vaapi` with `-aud 1` writes an
AUD only at IRAPs and drops every other picture from the bitstream, so an AUD-based reader turns a whole GOP into
one "frame" and the IRAP gate then rejects all of them: the connection stalls at "transferring" while the host
sends about 12 kbit/s. `UU_VIDEO_CODEC=h265` selects H.265 explicitly for A/B diagnosis.
### VAAPI (opt-in / 显式启用)
### VAAPI
`UU_VIDEO_ENCODER=vaapi` selects Intel/AMD H.264 VAAPI; `UU_VAAPI_DEVICE` defaults to
`/dev/dri/renderD128` (render-node permissions required). No automatic VAAPI selection.
Both FFmpeg process and `--features inproc-av` upload NV12 frames to a VAAPI frame pool.
`UU_VIDEO_ENCODER=vaapi` or `set-encoder vaapi` selects Intel/AMD H.264 VAAPI explicitly.
`UU_VAAPI_DEVICE` defaults to `/dev/dri/renderD128` (render-node permissions required).
`auto` is NVENC then CPU when an NVIDIA driver is present, and CPU otherwise. VAAPI is
selected only explicitly; putting it in auto waits on #33.
The FFmpeg process uploads NV12 frames to a VAAPI frame pool; a self-built `--features inproc-av`
binary instead runs VAAPI in process on X11 (a DRI3 DMA-BUF of the root window zero-copy, or XShm
upload without DRI3, then VPP to NV12 and VCN; H.264/HEVC).
VBR uses the viewer bitrate preset and CQ-derived minimum QP, no B-frames, async depth 1,
AUD and the existing GOP/VFR timing. Unsupported device/driver/initialization falls back to libx264
with a warning. Accepted on Intel UHD 770 (iHD) with the default FFmpeg process pipeline and the official Mac
viewer (presets, fps, scaling, reconnect; no fallback, ~40% less CPU than libx264). AMD and the `inproc-av`
VAAPI path are not hardware-verified.
viewer (presets, fps, scaling, reconnect; no fallback, ~40% less CPU than libx264 — a figure from the
FFmpeg-process-pipeline era). AMD iGPUs are verified on
the **in-process engine** (`--features inproc-av`): end-to-end sessions with the official Mac viewer passed
acceptance on HawkPoint (Mesa 26.2.3) and Cezanne (Mesa 26.2.5) — HEVC, presets, fps, scaling; on Cezanne,
H.264 and both capture paths were additionally probe-verified: the XShm upload (decodable bitstream, correct
picture) and the DRI3 zero-copy import. Measured on one machine (1920x1200@60, Cezanne iGPU + RTX 3050 Ti):
in-process VAAPI costs about **1/12** of the per-frame encode CPU of libx264 (FFmpeg pipeline, superfast)
and about **1/5** of in-process NVENC. The FFmpeg process pipeline (what the release packages use) is not
separately verified on AMD.
The default VAAPI VBV buffer (100-500 kbit) squeezes keyframes hard at high resolution: on a 2560x1440
H.264 VAAPI stream capped at 30 Mbit/s the first IDR measured 59,910 bytes and the picture blurred at
@@ -413,18 +564,21 @@ Omarchy uses Hyprland: run in its user session, select `UU_DESKTOP_BACKEND=wayla
and retain `WAYLAND_DISPLAY` / `XDG_RUNTIME_DIR`. This requires wlr-screencopy and the
virtual input protocols supported by Hyprland; other compositors may need `--features wayland,portal`.
For uinput, load `uinput` (at boot: `echo uinput | sudo tee /etc/modules-load.d/uinput.conf`) and apply the uaccess rule above; seat ACLs require an active login.
For unattended accounts, explicitly restrict `/dev/uinput` access to a dedicated group.
For unattended accounts, explicitly restrict `/dev/uinput` access to a dedicated group, e.g. `z /dev/uinput 0660 root uinput`
in `/etc/tmpfiles.d/uinput.conf` plus `sudo usermod -aG uinput <user>` (dedicated account only).
This permission can inject into the whole seat, including lock/greeter screens.
`UU_INPUT_BACKEND=uinput` requests kernel devices; verify startup actually reports uinput.
In Hyprland / uwsm sessions `default.target` may start before the compositor exports `WAYLAND_DISPLAY`;
tie the unit to the graphical session instead (community-verified autostart on Omarchy):
`After=` and `PartOf=graphical-session.target`, `ConditionEnvironment=WAYLAND_DISPLAY`,
`Environment=UU_DESKTOP_BACKEND=wayland` (no `DISPLAY`), and `WantedBy=graphical-session.target`.
Keep the unit name `uuremote-native.service` (not a template `[email protected]`): the desktop icon and
`uuremote-server show` always start that name (override with `UU_SERVICE_UNIT`). `niri --session` also imports
`WAYLAND_DISPLAY` before it is ready, so the same unit applies to niri (#55).
Optional VAAPI: `intel-media-driver` (modern Intel) or `libva-mesa-driver` (AMD), `libva-utils`
for `vainfo`. Optional KMS: `libdrm`. Virtual Xfce: `xorg-server-xvfb xorg-xauth xorg-xdpyinfo
xfce4-session xfce4-panel xfdesktop xfwm4 gnome-terminal`.
Rolling Arch FFmpeg may be newer than supported `inproc-av` (FFmpeg 6.x); use the default process
pipeline or build against a separate FFmpeg 6 prefix. Do not downgrade the system FFmpeg.
If building `viewer-ffmpeg`, rolling Arch FFmpeg may be newer than supported 6.x; use a separate FFmpeg 6 prefix rather than downgrading system FFmpeg (`inproc-av` native NVENC on the host does not depend on FFmpeg).
User-bus headless setup and the official Mac checklist: [virtual desktop acceptance](contrib/virtual-desktop/ACCEPTANCE.md).
### Experimental KMS / 实验后端
@@ -439,6 +593,8 @@ No official "no desktop" error code was found for headless desktop offers, so th
## Experimental native viewer (uuremote-viewer)
See [SDL viewer video scheduling](docs/viewer-video-scheduling.md).
`uuremote-viewer` is a Linux **viewer/controller**: it connects to and controls other devices on your UU account (official Windows / Mac
hosts or this project's Linux host), and can start remote assistance with someone's device ID and code. It is experimental and
separate from the host `uuremote-server`; the default host build and behaviour are unchanged.
@@ -449,7 +605,8 @@ terminal emulator (`TERMINAL` selects one). From source: `sudo apt install libsd
`cargo build --release --locked --features native-viewer,viewer-sdl --bin uuremote-viewer`.
SDL clipboard access reuses the desktop window to avoid temporary-window Dock churn on GNOME Wayland (#37).
Synchronization runs only while that window is focused and keeps the 30 KiB text limit. Selections without a supported
On niri, data-control-capable `wl-clipboard` is used instead, so synchronization does not require window focus.
Other SDL backends synchronize only while that window is focused. The 30 KiB text limit applies. Selections without a supported
text format are skipped; empty-text detection depends on the SDL2 backend. Builds without SDL retain the command backend.
SDL2 reads selections synchronously, so a slow selection owner can temporarily block the window; the bridge timeout cannot interrupt it.
GNOME-to-official-Mac bidirectional clipboard synchronization is still unverified; this change does not resolve host compatibility.
@@ -462,11 +619,28 @@ GNOME-to-official-Mac bidirectional clipboard synchronization is still unverifie
- CLI: `connect DEVICE false - echo legacy [--view-only]` (desktop), `files DEVICE ls|get|put …`, `terminal DEVICE [SESSION]`,
`terminal-ui DEVICE NAME`, `portmap DEVICE LOCAL_PORT HOST PORT` (listens on 127.0.0.1 only), `power DEVICE reboot|shutdown`, `unbind DEVICE` (remove a device from the account; also under "More tools" in the launcher),
`assist CONNECT_ID` (the code is read from one stdin line, never an argument). See `uuremote-viewer --help`.
- **Secure `type` input** (inject keystrokes into an open desktop session — lock-screen PIN/password; never put secrets on argv):
```sh
# Preferred: open desktop via ui/connect first, then type (reuses the session; does not kick the live view)
UU_INPUT_ENV=UU_SECRET UU_SECRET='…' \
uuremote-viewer type DEVICE [--delay-ms 40] [--omit-last 1] [--snapshot /path/out.png]
# Or: printf '%s' '…' | uuremote-viewer type DEVICE
# Validate only, no network: uuremote-viewer type DEVICE --dry-run
# If no desktop viewer is running you must pass --new-session (opens a new peer and replaces any already-open desktop window; upstream #30)
```
Brace tokens: `{Enter}` `{Tab}` `{Esc}` `{Backspace}` `{Ctrl+Alt+Del}` …; `{{` is a literal `{`.
**Layout**: characters are mapped for **US QWERTY** only (non-US layouts may mistype symbols/letters).
**Windows numeric PIN**: Windows often submits automatically once enough digits are entered — usually no `{Enter}` needed. Use `--omit-last N` to omit the last N characters when you want to fill without signing in.
Logs and `--dry-run` report lengths/event counts only. When reusing a session, about one second after sending, a PNG frame is saved (default under `$XDG_RUNTIME_DIR/uu-viewer-type/`, mode 0600); the path is logged and printed as `snapshot=…`.
- Ctrl+Alt+F in the desktop window opens the files window on the same connection. `UU_VIEWER_AUDIO=0` disables sound,
`UU_VIEWER_CLIPBOARD=0` the clipboard, `UU_VIEWER_VIEW_ONLY=1` input; `UU_VIEWER_FFMPEG` selects the ffmpeg binary.
- Desktop offers H.264 / H.265; the host chooses the codec. `UU_VIEWER_CODEC=h264` limits both SDP and decoder capabilities to H.264.
The default request stays 4:2:0; `UU_VIEWER_CHROMA=444` requests true color (4:4:4) after CONTROL opens. The host may fall back to
4:2:0, as reported by CaptureSettingSync. FFmpeg converts either chroma format to RGB24 for display.
- Frames are decoded at the host's native resolution and scaled to the window with linear filtering; a host resolution
change restarts the decoder. `UU_VIEWER_SIZE=WxH` forces a fixed letterboxed canvas instead.
The SDL remote desktop window disables local IME text composition and forwards physical keys; use the remote host’s input method and its language toggle (for example, Shift) to enter Chinese.
Mac targets use native macOS keycodes; Windows / Linux targets retain Windows VK. Keys follow physical positions, without
automatically translating Ctrl to Command; on a Mac target the PC Super / Windows key acts as Command. Only verified target
@@ -492,3 +666,11 @@ assistance and ISO / JIS keyboards have not been tested live.
"—" = not tested yet. Only use reboot/shutdown on machines you can restart. **Not tested live**: H.265 / 4:4:4 with official hosts, multiple monitors. Logs carry field
numbers, sizes and states only, never keystrokes, clipboard or file contents, codes or credentials.
### Native gamepad and rumble (experimental)
The SDL viewer forwards one mapped controller and ordinary two-motor rumble through the existing desktop CONTROL channel to a Windows host.
Default OFF: set `UU_VIEWER_NATIVE_GAMEPAD=1` to enable input; `UU_VIEWER_NATIVE_RUMBLE=0` disables feedback independently.
Guide forwarding, multiple controllers and adaptive triggers are unsupported; suspend, forced exit and network recovery are not comprehensively verified.
One reporting user tested input, phone-hotspot WAN, reconnect and rumble on one Windows/Steam Deck pair.
See [protocol evidence, design and limits](docs/deckpad-native-gamepad.md).
+173 -26
View File
@@ -19,6 +19,28 @@
<p align="center"><img src="docs/images/main-window.png" width="620" alt="Linux 主机主窗口:远程协助与账号"></p>
<p align="center"><sub>Linux 被控端主窗口:远程协助与账号(设备 ID、验证码和账号已打码)</sub></p>
## 外观 / Appearance
在控制端的 **设置 → 常规 → 外观**,或主机 / 工具窗口的齿轮设置按钮中选择 **跟随系统 / 浅色 / 深色**(默认跟随系统)。
选择保存在 `$XDG_CONFIG_HOME/uuremote/theme`(默认 `~/.config/uuremote/theme`)。
<p align="center"><img src="docs/images/appearance-light.png" width="360" alt="浅色界面(虚构设备)"> <img src="docs/images/appearance-dark.png" width="360" alt="深色界面(虚构设备)"></p>
## 语言 / Language
启动时按以下顺序确定界面语言:
1. `UU_LANG=zh` 或 `UU_LANG=en`;
2. 控制端 **设置 → 常规 → 语言 / Language** 或主机主窗口底部「语言 / Language」中保存的选择(保存在 `~/.config/uuremote/language`,重启后生效);
3. 系统区域设置:`LC_ALL` / `LC_MESSAGES` / `LANG` 以 `zh` 开头为中文,其余为英文。
```sh
UU_LANG=zh uuremote-viewer ui
UU_LANG=en uuremote-server
```
协议字段以及 UU 服务器返回的提示按服务器原文显示。
<!-- 截图占位:在官方客户端里远控 Linux 桌面的效果图。请自行截图并去掉账号、设备名等信息后放到
docs/images/remote-desktop.png,再取消下面这行的注释。注意不要截入网易的图标和品牌素材。 -->
<!-- <p align="center"><img src="docs/images/remote-desktop.png" width="720" alt="用官方 Mac 客户端远控 Linux 桌面"></p> -->
@@ -39,8 +61,8 @@
| 鼠标 / 键盘 | 绝对/相对移动、点击、滚轮、按键;修复了网络延迟导致的按键连发;Wayland 下可用 uinput 虚拟键鼠(不依赖键盘布局,见下文) |
| Mac 快捷键 | **推荐**:在 Mac 远控窗口菜单里关闭「使用 macOS 快捷键」,之后和在 Mac 上一样:Cmd+C/V/A/F/X/Z 是复制、粘贴、全选、查找、剪切、撤销(终端里 Cmd+C/V 自动变成 Ctrl+Shift+C/V),Ctrl+C 在终端里始终是中断。保持开启时,客户端会把 Cmd 和 Ctrl 都当成 Ctrl 发送:终端里 Ctrl+V / Cmd+V 自动转成粘贴,Ctrl+C 是中断,复制用 Cmd+Shift+C(X11) |
| 鼠标指针样式 | 远端指针形状实时同步(X11) |
| 剪贴板 | 双向文本同步 |
| 画质 / 帧率 / 分辨率 | 自动、原画 20M、超清 8M、高清 2M、自定义;30/60/90/144 帧;「其他分辨率」由编码器缩放,不改动主机显示器 |
| 剪贴板 | 双向文本同步;Wayland 手机输入法输入通过剪贴板兜底粘贴,见下文 |
| 画质 / 帧率 / 分辨率 | 自动、原画 20M、超清 8M、高清 2M、自定义;30/60/90/144 帧;X11 下切换分辨率会像官方 Windows 被控端一样真正修改桌面分辨率(xrandr,缺少该模式时自动添加;选「原始」或断开后恢复),`UU_DESKTOP_RESIZE=0` 改为仅由编码器缩放;Wayland 仍由编码器缩放 |
| 声音 | 采集系统声音(PulseAudio / PipeWire),Opus 编码传到控制端 |
| 文件传输 | 上传、下载(含文件夹)、新建文件夹、重命名、删除 |
| 终端 | 官方「终端」工具,PTY 会话,支持多会话和重命名 |
@@ -65,12 +87,19 @@ Portal 仅作用于本服务获授权的会话。文件传输、终端等独立
| Xfce | X11 | ✅ 虚拟机测试通过 | 默认 |
| Cinnamon / MATE | X11 | ✅ 虚拟机测试通过 | 默认 |
| Hyprland | Wayland(wlroots 原生协议) | 🧪 实验性,虚拟机测试(部分功能受限,见下) | `--features wayland` |
| niri | Wayland(wlroots 原生协议) | 🧪 实验性,采集、文字输入及竖屏切换已实机验收,其余待验证(#55) | `--features wayland` |
| GNOME / KDE Plasma | Wayland(xdg-desktop-portal) | 🧪 实验性,验证范围与限制见下 | `--features wayland,portal` |
GNOME Wayland 的 Portal/EIS 路径已在 Ubuntu 26.04、GNOME 50、单屏 4K/200% 缩放下验证画面和键鼠;锁屏冷连接自动解锁已用 Mac 和 iPhone 4.42.0 客户端实机验证,其余锁屏恢复及重连仍待验收。除 GNOME 的上述路径和 X11 外,其余桌面目前主要在虚拟机里测试。如果你在真机上遇到问题,欢迎[提交 issue](../../issues),
请附上发行版、桌面环境、显卡型号和 `journalctl --user -u uuremote-native.service` 里的相关日志。
最后一列是源码编译方式;Release 预编译包已包含全部后端,直接使用即可(见[安装](#0-直接用-release-预编译包推荐x86_64))。
Wayland 下的限制:只支持单屏、固定分辨率;Hyprland 原生后端默认使用双缓冲流水线 shm screencopy,控制端帧率设置会同步到采集节拍和编码器,但实际帧率仍受合成器、渲染和读回速度限制(旧串行路径在 2560x1600 曾测得约 16~22 帧;流水线只在虚拟机里测量过,不代表实机保证);portal 后端暂不支持动态分辨率;GNOME 的屏幕唤醒与锁屏恢复见下;剪贴板只在控制端的远控窗口处于前台时同步。
GNOME Wayland 的 Portal/EIS 路径已在 Ubuntu 26.04、GNOME 50、单屏 4K/200% 缩放下验证画面和键鼠;锁屏冷连接自动解锁已用 Mac 和 iPhone 4.42.0 客户端实机验证,其余锁屏恢复及重连仍待验收。除 GNOME 的上述路径和 X11 外,其余桌面目前主要在虚拟机里测试。如果你在真机上遇到问题,欢迎[提交 issue](../../issues),
请附上 `uuremote-server doctor` 的输出(v0.2.17 起;只含会话、后端、插件、权限、编码器等状态,不含账号、令牌或地址,可直接粘贴)和 `journalctl --user -u uuremote-native.service` 里的相关日志。
Wayland 下的限制:默认采集单屏,Hyprland 可按上文启用切屏;分辨率固定;Hyprland 原生后端默认使用双缓冲流水线 shm screencopy,控制端帧率设置会同步到采集节拍和编码器,但实际帧率仍受合成器、渲染和读回速度限制(旧串行路径在 2560x1600 曾测得约 16~22 帧;流水线只在虚拟机里测量过,不代表实机保证);portal 后端暂不支持动态分辨率;GNOME 的屏幕唤醒与锁屏恢复见下;剪贴板只在控制端的远控窗口处于前台时同步。
**手机控制端触控(GNOME)**:Android/iOS 控制端在触控模式下把手指当作左键拖动发送,在桌面上会选中文字。Portal 后端下被控端按每次按下判断:0.45 秒内移动超过几个像素即平滑滚动(`NotifyPointerAxis`,内容跟随手指,终端里同样有效,最后一个事件让客户端可以惯性滑动);按住不动则像鼠标拖动一样选中;短按为点击。此模式无需触摸屏授权。`UU_TOUCH_INPUT=touch` 改为把拖动按单指触控在 Portal 触摸屏上重放,门户提供触摸屏设备类型时被控端会一并申请;此前保存的授权只恢复键盘和指针,因此第一次拖动时会在后台再申请一次(GNOME 共享对话框,手机画面中也能看到,授权超时后自动关闭),同意同一显示器后无需重连即切换为触控。不会预先删除已保存的授权,每次运行最多申请一次。`UU_TOUCH_INPUT=0` 保持鼠标拖动。
**Wayland 手机输入法打字与剪贴板**:Wayland 下手机端输入法提交的文字(`text_input`)优先通过虚拟键盘空闲键码上屏;GNOME(Portal)下,当前输入源为拉丁 xkb 布局时,可打印 ASCII 直接以 keysym 输入(由 Mutter 选择按键和 Shift 层级);其他文字、KDE 以及键码耗尽的环境自动通过「写系统剪贴板 + 触发 `Shift+Insert`(或 `UU_WAYLAND_PASTE_KEY=ctrl_v`)」兜底粘贴。VTE 终端的 `Shift+Insert` 粘贴的是 PRIMARY 选区,因此 ASCII 改为直接输入。**注意**:此兜底过程会覆盖被控端原有的剪贴板内容,且会被双向同步回传到控制端剪贴板;设置 `UU_WAYLAND_TEXT=0` 可完全关闭 Wayland 文字输入及该粘贴兜底。
GNOME 缩放桌面在使用 Portal 原生键鼠时,若支持 `ConnectToEIS` 和屏幕 `mapping_id`,通过同一授权会话的 EIS 接口注入输入,按匹配的区域与实际帧尺寸分别映射横纵坐标,没有固定分辨率或缩放倍率,可避免 `NotifyPointerMotionAbsolute` 在缩放时拒绝坐标。Portal 构建需要 libei ≥ 1.1。缺少 EIS 支持时保留旧输入路径及其既有缩放限制;其他初始化错误会明确报告并触发会话恢复。EIS 连接成功后全部输入统一使用 EIS。只采集画面或使用 uinput 时不会初始化 EIS;缺少可选的逻辑尺寸也不阻断采集。键盘沿用项目现有的 Windows VK → evdev 映射。恢复时保持编码器的采集帧尺寸不变,允许缩放后的逻辑尺寸变化。GNOME 显示配置变化后,已推流的 Portal 采集若持续「暂停且无有效格式」,会在关联通知后的 200 毫秒宽限结束后提前进入现有恢复流程;正常重协商恢复会取消提前判定,连续通知不会推迟同次异常的判定。未收到相关通知时保留五秒兜底;静态画面或有效格式下的暂停不会触发恢复。Ubuntu 26.04、GNOME Wayland 单屏 3840×2160 已实测保持连接切换 200%→166.67%→200%,恢复后画面持续更新且鼠标可控制全屏;切换期间会短暂停顿、黑屏后恢复,五秒是兜底判定阈值,并非总恢复时间。提前恢复的测量结果和验证范围见 [#35](../../pull/35)。此路径仍需实机验证锁屏恢复;多屏、连接中改变分辨率及旋转/镜像变换不属于本次修复范围。 捕获设置协议仍为版本 4:对客户端上报的分辨率统一使用像素坐标、DPR 为 1;Portal 逻辑尺寸仅用于本地输入映射。
@@ -82,20 +111,32 @@ GNOME Portal 的控制通道不再等待授权窗口或第一帧画面:先通
锁屏黑帧使用 FFmpeg 的 libx264/libx265 编码器(按已协商的 H.264/H.265 选择),硬件编码器可用并不代表这些软件编码器已安装。编码失败会明确记录日志。黑帧不改变采集权限或上报的真实屏幕尺寸;解锁或锁状态未知时暂停,采集就绪、拒绝或连接关闭时结束,再由真实视频接续同一条视频轨。对照实验与验证范围见 [#29](../../issues/29)、[#34](../../pull/34)。
原生 Wayland 后端需要合成器提供 `wlr-output-power-management` 才能唤醒已关闭的屏幕;缺少该协议不影响采集和编码。
原生 Wayland 后端需要合成器提供 `wlr-output-power-management` 才能唤醒已关闭的屏幕;缺少该协议不影响采集和编码。视频启动及运行期间,屏幕保活失败仅记录警告并在下轮重试,不终止视频;实际采集、编码或发送错误仍按原逻辑处理。
原生 Wayland 实验选项:`UU_WAYLAND_PIPELINE=0` 可关闭流水线做对照。`UU_WAYLAND_DMABUF=1` 显式尝试 dma-buf→GBM CPU 映射(默认关闭,需要运行时 libgbm;可用 `UU_WAYLAND_DMABUF_DEVICE` 指定 render node,默认 `/dev/dri/renderD128`)。仅支持显式线性修饰符、单平面 8-bit RGB,失败回退 SHM;virgl VM 中只验证了回退,成功导入/映射和硬件加速均未验证。这不是零拷贝 VAAPI 路径;选择 `UU_VIDEO_ENCODER=vaapi` 时仍由 FFmpeg 上传 CPU 帧。
首次连接时,桌面会弹窗请求「远程桌面 / 屏幕共享」授权,同意后会记住授权。
### 多显示器切换(实验性)
原生 Wayland 的绝对鼠标定位默认绑定正在采集的输出,修复双屏桌面下的点击偏移。uinput 可继续用于键盘、按键和相对移动。
设置 `UU_WAYLAND_MULTISCREEN=1` 后,手机端可选择并切换物理显示器;`UU_WAYLAND_OUTPUT` 指定默认屏幕。画面与绝对鼠标定位同步切换,支持不同分辨率、缩放和桌面位置。
X11 会话默认把所有显示器拼成一张画面。设置 `UU_X11_MULTISCREEN=1` 后,主机按 `xrandr --listmonitors` 列出各个显示器,控制端可选择其中一块,只采集该区域,绝对鼠标坐标加上该屏幕在桌面中的偏移;默认屏幕为主显示器,`UU_X11_OUTPUT` 可指定其他屏幕(如 `HDMI-1`)。显示器布局在主机启动时读取,改动后需重启服务。此模式下控制端的「分辨率」改为缩放画面,不再修改显示模式。实验性:目前只有单元测试与 Xvfb 虚拟显示器实测,尚未经官方客户端实机验收。
切屏复用同一条视频轨道,过渡期间暂停输入,发送新屏首帧后恢复;采集或编码失败、等待首帧超时会请求恢复原屏。Hyprland 通过 `hyprctl` 枚举未旋转的显示器,显示器插拔或布局变化后需重启服务。已在 Omarchy / Hyprland 上用官方手机客户端实测 2560×1440(125%)与 1920×1080(133.33%)双屏切换及点击。
niri 会话通过 `niri msg --json outputs` 枚举已启用的显示器。普通及 90°/180°/270° 旋转输出仅在 `NIRI_SOCKET` 存在时启用;镜像变换暂不支持。三屏切换、90° 竖屏画面与点击,以及手机向 Codex 输入中文已在 CachyOS + niri 实测。其他合成器继续拒绝旋转输出,保留原有文本输入路径。显示器布局变化后需重启服务。
## 尚未实现 / 不支持
| 功能 | 状态 |
|---|---|
| 多显示器切换 | 开发中 |
| 真彩(4:4:4) | 支持(v0.1.15):NVENC / libx264 的默认 FFmpeg 管线输出 H.264 High 4:4:4;VAAPI 和 `inproc-av` 管线仍为 4:2:0,并如实回报给客户端 |
| 多显示器切换 | niri / Hyprland 原生 Wayland 后端与 X11(`UU_X11_MULTISCREEN=1`)实验性支持,见上文 |
| 真彩(4:4:4) | 支持(v0.1.15):NVENC / libx264 的默认 FFmpeg 管线输出 H.264 High 4:4:4;`inproc-av` 原生 NVENC 输出 H.264 High 4:4:4 / HEVC FRExt;VAAPI 管线仍为 4:2:0,并如实回报给客户端 |
| HDR | 未实现 |
| 超级屏 / 虚拟显示器 | 未实现 |
| 被控端防窥模式 | 未实现 |
| 被控端防窥模式 | 实验性,仅 KDE Plasma Wayland(portal);Mac 4.43.0 已验证不启用、隐私屏保、关闭显示屏三种状态回显,见 [docs/privacy-screen.md](docs/privacy-screen.md) |
| 麦克风(控制端声音传到被控端) | 未实现(需要虚拟声卡) |
| 魔兽世界排队提醒等插件 | 不支持,会明确告诉客户端「无插件」 |
| Linux 系统登录界面 | 还不支持控制开机后的系统登录界面(还没有人登录 Linux 桌面时);这种情况可以用无头模式或虚拟桌面(见下文)。注意:这里说的是 Linux 系统登录,**不登录 UU 账号**现在可以通过「远程协助」使用 |
@@ -104,6 +145,42 @@ GNOME Portal 的控制通道不再等待授权窗口或第一帧画面:先通
## 安装
### 0. 直接用 Release 预编译包(推荐,x86_64 / aarch64)
**Ubuntu / Debian(v0.2.18 起)**:下载 `uu-remote-linux_<版本>_amd64.deb`(ARM64 选 `arm64`)后:
```sh
sudo apt install ./uu-remote-linux_<版本>_amd64.deb
uuremote-server login # 用 UU 远程 App 扫码
systemctl --user enable --now uuremote-native.service # 随图形会话启动
```
deb 会安装程序、插件、用户级 systemd 服务和应用菜单图标,并通过依赖自动装上 FFmpeg;uinput 权限不会自动开启(见第 5 步)。
GNOME / KDE 会把显示环境自动传给服务;Xfce 等不传的桌面需按第 4 步补 `DISPLAY`。
**其他发行版**:从 [Releases](../../releases/latest) 下载 `uu-remote-linux-<版本>-x86_64-linux.tar.gz`(ARM64 选 `aarch64-linux`),解压后用普通桌面用户(不要 root)运行:
```sh
cd uu-remote-linux-<版本>-x86_64-linux
./install.sh # 加 --yes 不询问;--no-ffmpeg 只检查不安装
```
脚本把程序和插件装到 `~/.local`,写入用户级 systemd 服务(已有则保留),并检查 FFmpeg(需带 libx264,否则客户端会一直停在「正在传输画面」)。
缺 FFmpeg 时经 sudo 用 apt / pacman 安装;Fedora 需先启用 RPM Fusion,openSUSE 需 Packman 源,脚本只提示命令、不替你添加第三方源。
服务启动时和每次有人连接桌面时都会检查 FFmpeg:不可用就记 error,并弹桌面通知(没有通知服务时打开主窗口,顶部红字提示安装方法,最多每 5 分钟一次);装好后重新连接即可,不用重启服务。
同一个包支持 X11、Hyprland 等 wlroots 合成器和 GNOME/KDE Wayland:程序启动时按当前会话自动选择后端,只在 Wayland 会话里
才加载对应的 `libuu-*.so`,X11 用户不需要任何 Wayland 库。系统要求:
| 会话 | 要求 |
|---|---|
| X11 | glibc ≥ 2.35(Ubuntu 22.04、Debian 12 及更新) |
| Hyprland / Sway / niri 等 wlroots | 同上,另需 `libwayland-client`、`libxkbcommon`(Wayland 桌面自带) |
| GNOME / KDE Wayland | glibc ≥ 2.39(Ubuntu 24.04、Fedora 40、Debian 13 及更新),以及 libei ≥ 1.1、PipeWire |
插件放在 `uuremote-server` 同目录、`../lib/uu-remote-linux/`、`~/.local/lib/uu-remote-linux/` 或 `/usr/lib/uu-remote-linux/` 都能找到
(`UU_ENGINE_DIR` 可指定)。缺库或版本太旧时日志会写明原因。之后从第 3 步「登录」继续;其他架构请按下面源码编译。
### 1. 依赖(Ubuntu / Debian)
```sh
@@ -114,6 +191,10 @@ sudo apt install build-essential pkg-config \
sudo apt install libwayland-dev libxkbcommon-dev wl-clipboard
# 可选:GNOME/KDE portal 后端
sudo apt install libglib2.0-dev libpipewire-0.3-dev libei-dev
# 可选:inproc-av 的 VAAPI/DRI3 引擎编译所需(libva 本体运行时加载)
sudo apt install libva-dev libgbm-dev libx11-xcb-dev libxcb-dri3-dev libxcb-damage0-dev
# inproc-av 的进程内音频采集与 Opus 编码
sudo apt install libpulse-dev libopus-dev
```
- 需要 Rust 工具链(<https://rustup.rs>)。
@@ -128,6 +209,12 @@ cargo build --release --features wayland # + Hyprland
cargo build --release --features wayland,portal # + GNOME/KDE Wayland
```
控制端的 `viewer-ffmpeg` 只支持 **FFmpeg 6.x**(`pkg-config --modversion libavcodec` 为 60.x);FFmpeg 7 及以上会在依赖 `ffmpeg-sys-next` 里报 `avfft.h file not found`(#63)。
服务端可选的 `--features inproc-av` 是 X11 下的进程内硬件编码:不链接 FFmpeg 开发库,NVENC 运行时加载 NVIDIA 驱动库(`libcuda.so.1`、`libnvidia-encode.so.1`,需要支持 NVENC API 12.1 的驱动,530 及以上),VAAPI 运行时加载 `libva.so.2`/`libva-drm.so.2`。截屏与编码尺寸一致时 NVENC 直接读取 XShm 缓冲,省去一次主机到显存的拷贝;VAAPI 在同一特性下也进程内运行(DRI3 DMA-BUF 零拷贝,无 DRI3 时 XShm 上传,VPP 转 NV12 后送 VCN,支持 H.264/H.265)。CPU 编码或 `UU_CAPTURE=grab` 仍走外部 FFmpeg 进程;进程内硬件编码启动失败时先回退到对应的 FFmpeg 进程管线,再回退到 CPU。默认构建和预编译包都不需要该特性。
GNOME/KDE Wayland 的进程内编码用 `cargo build --release --features wayland,portal,inproc-av` 配合 `set-encoder vaapi` 启用,目前仅支持 Portal + VAAPI。
`UU_PORTAL_DMABUF=0` 禁用 DMA-BUF、改用进程内上传;`UU_VIDEO_PIPELINE=process` 恢复外部 FFmpeg 管线。
### 3. 登录
在图形桌面里运行:
@@ -139,6 +226,10 @@ cargo build --release --features wayland,portal # + GNOME/KDE Wayland
用手机上的 **网易 UU 远程 App** 扫码并确认即可。登录信息只保存在本机的
`~/.config/uuremote/config.json`(权限 0600)里。
登录状态查询失败或达到 60 秒请求超时不代表二维码已过期,也不代表手机已经确认。程序保留官方客户端的刷新策略:查询出错后点击「刷新二维码」(终端按回车;无窗口且无终端时 60 秒后刷新)。二维码请求诊断只包含请求阶段、错误类别、耗时、HTTP/API 状态及最后已知扫码状态,不输出票据、URL 或响应内容;`connect` 类别本身不能确定是 DNS、TLS 还是代理问题。
这个文件里还有本机的设备身份(`device_id`、`client_id`、`system_id`),重装软件和重新扫码登录都会沿用它。**不要在机器之间拷贝 `config.json`,也不要从带着家目录的快照/数据盘克隆出第二台主机**:同一身份的两个主机实例(不论在同一台还是不同机器上)会互相把对方踢出房间,日志表现为每隔几秒出现 `Cloud room leave without peer identifier` 并反复重连,控制端一连就断。克隆或拷贝出来的机器先停掉服务,删掉配置里这三个键和 `token`、`csrf`、`user_id`,再运行 `uuremote-server login` 注册为新设备。同一台机器上残留的旧实例(例如以前手动启动的 `~/.local/bin/uuremote-server`)也会这样,`uuremote-server doctor` 发现多个主机实例时会提示。
### 4. 作为用户服务常驻
`~/.config/systemd/user/uuremote-native.service`:
@@ -147,17 +238,17 @@ cargo build --release --features wayland,portal # + GNOME/KDE Wayland
[Unit]
Description=UU Remote Linux host (unofficial)
After=graphical-session.target
PartOf=graphical-session.target
[Service]
Environment=RUST_LOG=info
# X11 桌面需要指明显示器;GNOME 的 XAUTHORITY 一般在 /run/user/<uid>/gdm/Xauthority
Environment=DISPLAY=:0
# GNOME/KDE 等桌面会把 DISPLAY / WAYLAND_DISPLAY 导入用户管理器,并启动 graphical-session.target
ExecStart=%h/.local/bin/uuremote-server
Restart=always
RestartSec=5
[Install]
WantedBy=default.target
WantedBy=graphical-session.target
```
```sh
@@ -169,6 +260,9 @@ journalctl --user -u uuremote-native.service -f # 看到 availability=Some("re
如果还没有登录,服务会自动在桌面上弹出扫码窗口。
Xfce、i3 等不启动 `graphical-session.target` 的桌面,按上面的写法开机不会自启:把 `[Install]` 改成 `WantedBy=default.target`,
并加上 `Environment=DISPLAY=:0`(按实际显示器填写),再重新 `enable`。下文的无头模式、虚拟桌面也要用 `default.target`。
### 5. Wayland 下使用 uinput 虚拟键鼠(推荐)
Wayland(尤其是 GNOME/KDE portal)下,默认的键鼠注入要经过 portal 授权,部分键盘布局下还会丢符号(比如下划线)。
@@ -183,6 +277,8 @@ sudo udevadm control --reload && sudo udevadm trigger --name-match=uinput
`uaccess` 只把权限给当前坐在这台机器前的登录用户。`UU_INPUT_BACKEND=uinput|native` 可以强制指定后端。
X11 默认继续用 XTest,因为它能正确处理网络延迟下按住不放的按键。
uinput 的 ASCII 文本映射依赖 X11/XWayland XKB;不可映射的文字保留原有文字输入/剪贴板路径。
## 远程协助与主窗口(实验性)
和官方客户端的「远程协助」一样:本机显示**设备 ID** 和**验证码**,把它们发给信任的人,对方在 UU 远程的「开始协助」里输入即可控制本机。
@@ -199,6 +295,7 @@ X11 默认继续用 XTest,因为它能正确处理网络延迟下按住不放
```sh
install -Dm644 contrib/desktop/uu-remote-linux.svg ~/.local/share/icons/hicolor/scalable/apps/uu-remote-linux.svg
install -Dm644 contrib/desktop/uu-remote-linux.desktop ~/.local/share/applications/uu-remote-linux.desktop
install -Dm644 contrib/desktop/uu-remote-linux-viewer.desktop ~/.local/share/applications/uu-remote-linux-viewer.desktop
```
验证情况:访客身份下的连接、错误验证码拒绝、用完换码、关闭后不可连接、登录与退出登录的切换,已用官方 Mac 客户端实测通过。
@@ -207,7 +304,7 @@ install -Dm644 contrib/desktop/uu-remote-linux.desktop ~/.local/share/applicatio
## 没有显示器的服务器
**无头模式**:只要终端、文件传输和端口映射,不需要图形界面。在服务里加 `Environment=UU_DESKTOP_BACKEND=none`,
再执行 `loginctl enable-linger $USER`,这样开机后不用登录,systemd 用户服务(以及 `XDG_RUNTIME_DIR`、用户 D-Bus)也会自动启动。
把 `[Install]` 改成 `WantedBy=default.target`(无人登录时 `graphical-session.target` 不会启动),再执行 `loginctl enable-linger $USER`,这样开机后不用登录,systemd 用户服务(以及 `XDG_RUNTIME_DIR`、用户 D-Bus)也会自动启动。
无头模式下控制端点「远程桌面」会一直显示正在连接,这是正常的。首次登录用 `uuremote-server login --no-gui` 在终端里扫码。
**群晖 / NAS(Docker)**:没有桌面的 NAS 可以用容器运行无头模式(文件传输、终端、端口映射)。
@@ -247,18 +344,35 @@ systemctl --user restart uuremote-native.service
|---|---|
| `UU_CONFIG` | 配置文件路径(默认 `~/.config/uuremote/config.json`) |
| `UU_DESKTOP_BACKEND` | `auto` / `x11` / `wayland` / `portal` / `kms`(实验性特性) / `none`(无头模式) |
| `UU_DESKTOP_RESIZE=0` | X11 下控制端切换分辨率时不改桌面分辨率,只缩放编码画面 |
| `UU_NVENC_RGB=0` / `=1` | NVENC 直接编码 BGRA(省 CPU)。显示器接在 NVIDIA 卡上时默认关闭(同卡合成时直吃反而更慢),`0` 强制关,`1` 强制开 |
| `UU_WAYLAND_MULTISCREEN=1` | 启用 Hyprland / niri 物理显示器切换(默认关闭) |
| `UU_WAYLAND_OUTPUT` | 原生 Wayland 默认采集输出名称,例如 `HDMI-A-1` |
| `UU_X11_MULTISCREEN=1` | X11 下按显示器分别选择和采集(实验性,默认关闭,需要 `xrandr`) |
| `UU_X11_OUTPUT` | X11 默认采集的显示器名称(`xrandr --listmonitors`),默认主显示器 |
| `UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1` | 原生 Wayland 不创建虚拟键盘(如 Denial 只把它给自己的输入法),键盘改走 uinput。合成器没有 wlr-virtual-pointer 时鼠标也自动改走 uinput(#72) |
| `UU_INPUT_BACKEND` | `auto`(默认,Wayland 下可用时用 uinput)/ `uinput` / `native` |
| `UU_TERMINAL_SHORTCUTS=0` | 关闭终端窗口里的 Ctrl+V 粘贴转换 |
| `UU_VIDEO_ENCODER` | `cpu` 强制 CPU;`vaapi` 显式启用 Intel/AMD 硬编;`nvenc` 强制 NVENC;未设置时检测到 NVIDIA 驱动才用 NVENC,否则用 CPU |
| `UU_VIDEO_ENCODER` | `cpu` 强制 CPU;`vaapi` 显式启用 Intel/AMD 硬编;`nvenc` 强制 NVENC;未设置或 `auto` 时后台探测(每个候选编码一帧,限时 3 秒)。有 NVIDIA 驱动时顺序是 NVENC → CPU;没有 NVIDIA 时只有 CPU,不探测。探测未完成就建流则沿用旧规则(有 NVIDIA 用 NVENC,否则 CPU)。自行编译的 `--features inproc-av` 上,仅 X11 会先走进程内引擎:外部 FFmpeg 探测失败时记为 `native_unprobed`,沿用旧规则(NVENC);Wayland、portal、KMS 回退 CPU。只有 CPU 时跳过探测,记为 `not probed (only candidate)`。探测成功和这种只含 CPU 的跳过会缓存到 NVIDIA 是否存在发生变化为止(`/proc/driver/nvidia/version` 或 `/dev/nvidia0`)。之后的桌面连接在后台再探测一次(不挡住这一路,仍用缓存的编码器)。NVENC 探测失败、选用 CPU 时只缓存 10 分钟;到期后下一次桌面连接同样在后台再探测一次,再次失败则重新计 10 分钟。显式 `cpu` / `vaapi` / `nvenc` 不启动探测。`native_unprobed` 不算失败缓存。优先级低于 `host_settings.json` 里非 `auto` 的 `video_encoder`。VAAPI 要等 #33 解决后才会进入 auto |
| `UU_VAAPI_BUFFER_MS` | VAAPI 的 VBV 缓冲(10–1000 ms,仅 `UU_VIDEO_ENCODER=vaapi` 时生效);高分辨率下关键帧被压糊时用它换稳定画质 |
| `UU_NVENC_BUFFER_MS` | NVENC 的 VBV 缓冲(10–1000 ms,仅 NVENC 生效,含进程内引擎);默认 100–500 kbit,1440p 等高分辨率下关键帧被压糊、按 GOP 周期闪烁时设 `1000`(#103) |
| `UU_FFMPEG_ROOT` | 使用指定目录下的 FFmpeg |
| `UU_AUDIO=0` | 关闭声音转发;`UU_AUDIO_SOURCE` 指定 PulseAudio 采集源 |
| `UU_LOGIN_WINDOW=0` | 凭证缺失时不自动弹出登录窗口 |
| `UU_REMOTE_ASSIST=0` | 关闭远程协助(未登录时也不再以访客身份提供协助) |
| `UU_ASSIST_ALLOW=1` | 启动时就允许他人远程协助(覆盖窗口里保存的开关状态) |
| `UU_PORT_MAPPING=0` | 关闭端口映射(对应官方被控端的开关) |
| `UU_WOL_HELPER=1` | 实验性:让这台主机像官方 Windows 被控端一样充当「远程开机」辅助设备——登录后向网易上报本机局域网信息,收到云端唤醒请求时向同一局域网发送唤醒包(未经端到端验证) |
| `UU_USE_PROXY=1` | REST API 与 host/viewer WebSocket 信令共用环境 HTTP/HTTPS 代理策略;默认忽略代理、直连 |
「远程结束后自动锁屏」「静音运行」等设置保存在 `~/.config/uuremote/host_settings.json`。
`UU_USE_PROXY=1` 仅使用当前进程已有的代理配置;`HTTP_PROXY` / `HTTPS_PROXY` / `ALL_PROXY`(及小写形式)和 `NO_PROXY` 按 reqwest 的标准规则选择,大写优先。信令拒绝选定变量中的无效/不支持的代理 URL(仅 HTTP/HTTPS;不支持 SOCKS)、带路径/查询/片段的代理 URL,以及会忽略代理的 CGI 环境;此校验比 reqwest 默默忽略坏值更严格。未配置匹配代理或命中 `NO_PROXY` 时仍正常直连,选中代理后连接失败不会改为直连。信令保留 TLS 证书校验,不跟随重定向,也不转发认证头到重定向目标。
开启后主机还会经 TCP/TLS 连接云端 TURN 中继(使用 `HTTPS_PROXY`/`ALL_PROXY` 里的无认证 `http://` 代理做 CONNECT,没有代理则直连),适用于 UDP 到不了 TURN 服务器、只有 TCP/代理能出网的主机;TURN 证书按 CA 链校验,云端下发的 TURN 地址是 IP 时容忍名称不匹配(媒体本身由 DTLS-SRTP 端到端加密)。默认(不开代理)只用 UDP 中继,行为不变。**这不创建任何新的网络出口**:登录、信令和媒体仍需各自有允许使用的网络路径。连接器只返回固定错误类别/HTTP 状态;不要为诊断开启会记录 URL/认证信息的依赖库 TRACE 日志。
「远程结束后自动锁屏」「静音运行」等设置保存在 `~/.config/uuremote/host_settings.json`。同一文件里的 `video_encoder`(`auto`/`cpu`/`vaapi`/`nvenc`)和 `video_codec`(`auto`/`h264`/`h265`)用 `uuremote-server set-encoder`、`uuremote-server set-codec` 写入(非法参数退出码 2)。非 `auto` 的值优先于 `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`;`auto` 或留空则落到环境变量,再落到 auto(有 NVIDIA 时 NVENC 优先,失败再 CPU;没有 NVIDIA 时就是 CPU,不探测;codec 仍是硬件优先 H.265、CPU 用 H.264)。探测在启动时后台进行,不挡住第一路出图。成功结果缓存到进程退出,但 NVIDIA 是否存在(`/proc/driver/nvidia/version` 或 `/dev/nvidia0`)与报告不一致时,下一次桌面连接会在后台再探测一次(`warm_auto_probe`),这一路仍用缓存的编码器,直到新结果写入。NVENC 失败只缓存 10 分钟,到期后的桌面连接同样在后台再探测一次,这一路仍用当前结果。`set-encoder` 和 `set-codec` 写完后若 `host.pid` 指向正在运行的本程序,都会发 `SIGUSR2`:编码器变化时进行中的桌面流立刻换编码器(不断开,沿用本会话已协商的 codec;新编码器起不来时按进程内 → FFmpeg 进程 → CPU 回退)。手改文件后可 `kill -USR2 $(cat ~/.config/uuremote/host.pid)`。`SIGUSR2` 不重新探测。codec 偏好仍在下次建立桌面连接时生效(运行中的 host 只记日志,不重开编码)。显式 `vaapi` 请求真彩时仍用 VAAPI、编码 4:2:0,并在 CaptureSettingSync 的 field 3 回报 4:2:0。所选编码器在本机不可用时,建流回退 CPU 并记 warning。VAAPI 进入 auto 要等 #33。
自定义码率按客户端选择的 Mbps 生效,例如 1 Mbps 对应 1000 kbit/s 的编码上限。
选择码率档(原画 / 超清 / 高清 / 自定义)时,外部 FFmpeg 的 CPU 编码以平均码率(ABR)为目标,避免 4K 低码率下关键帧发灰;「自动」档仍使用恒定质量(CRF)。
@@ -310,8 +424,9 @@ flowchart LR
### H.265 / HEVC
控制端和主机都支持 H.265 时,主机自动使用 H.265(与官方主机一致,由主机按双方能力选择;官方 Mac 客户端在 SDP
中优先列出 H.265)。首次桌面连接会用合成帧探测实际编码能力,并通过 CodecNegotiation 告知客户端。支持 `hevc_nvenc`、
控制端和主机都支持 H.265、且主机使用硬件编码器(NVENC / 显式 VAAPI)时,主机自动使用 H.265(与官方主机一致,由主机按双方能力选择;官方 Mac 客户端在 SDP
中优先列出 H.265)。**只有 CPU 编码时默认用 H.264**:libx265 比 libx264 慢约 10 倍(4 核 ARM 上 1080p 实测约 15 帧对 155 帧,#59),
可用 `UU_VIDEO_CODEC=h265` 强制 H.265。实际帧率由控制端的「画质/帧率」菜单决定;`UU_DISPLAY_FPS` 只改上报的显示器刷新率。首次桌面连接会用合成帧探测实际编码能力,并通过 CodecNegotiation 告知客户端。支持 `hevc_nvenc`、
`libx265`、显式 `UU_VIDEO_ENCODER=vaapi` 的 `hevc_vaapi`;硬件失败先回落软件 HEVC,再回落 H.264。
`UU_VIDEO_CODEC=h264` 强制使用 H.264。8-bit;真彩 4:4:4 使用 hevc_nvenc `rext` / libx265 `main444-8`。
已用官方 Mac 客户端在 RTX 3090(hevc_nvenc,含 4:4:4)实机验收;`hevc_vaapi` 配官方 Android 客户端也已实机验收
@@ -321,13 +436,14 @@ HEVC 的访问单元按 RFC 7798 的图片边界切分,不依赖 AUD:`hevc_v
画面从码流里丢掉,读取端按 AUD 切分就会把整个 GOP 当成一帧,再被 IRAP 门控全部拒绝——对外表现为连接停在
「正在传输画面」,而主机侧只有约 12 kbit/s。`UU_VIDEO_CODEC=h265` 可显式选中 H.265,便于对照排查。
### VAAPI 硬件编码(显式启用)
### VAAPI 硬件编码
设置 `UU_VIDEO_ENCODER=vaapi` 使用 Intel/AMD H.264 VAAPI;`UU_VAAPI_DEVICE` 默认
`/dev/dri/renderD128`,运行用户需要 render 节点权限。不会自动选择 VAAPI;设备或驱动初始化
失败会明确警告并回退 libx264。外部 FFmpeg 和 `--features inproc-av` 均先转 NV12 再上传硬件帧。
`UU_VIDEO_ENCODER=vaapi` 或 `set-encoder vaapi` 显式选择 Intel/AMD H.264 VAAPI。
`UU_VAAPI_DEVICE` 默认 `/dev/dri/renderD128`,运行用户需要 render 节点权限。
`auto` 有 NVIDIA 驱动时是 NVENC → CPU,没有 NVIDIA 时是 CPU。VAAPI 只通过显式选择启用,进入 auto 要等 #33。
设备或驱动初始化失败会明确警告并回退 libx264。外部 FFmpeg 先转 NV12 再上传硬件帧。
VBR 使用控制端码率预设及 CQ 对应的最小 QP,无 B 帧、async depth=1,并保留现有 GOP/VFR 规则。
Intel 核显(UHD 770,iHD 驱动)已实机验收:默认的外部 FFmpeg 管线用官方 Mac 控制端测试了各档画质、帧率、缩放和重连,全程硬件编码、无回退,CPU 占用比 libx264 低约 40%。**AMD 显卡和 `--features inproc-av` 管线的 VAAPI 尚未实机验证。**
Intel 核显(UHD 770,iHD 驱动)已实机验收:默认的外部 FFmpeg 管线用官方 Mac 控制端测试了各档画质、帧率、缩放和重连,全程硬件编码、无回退,CPU 占用比 libx264 低约 40%(该数字为 FFmpeg 进程管线时代的测量)。AMD 核显已在**进程内原生引擎**上实机验收(`--features inproc-av`):官方 Mac 客户端的端到端会话在 HawkPoint(Mesa 26.2.3)与 Cezanne(Mesa 26.2.5)上通过验收(HEVC,含画质档、帧率、缩放);Cezanne 上另以探测验证了 H.264 与两条采集路径——XShm 上传(码流可解码、画面正确)与 DRI3 DMA-BUF 零拷贝导入。同机实测(1920×1200@60,Cezanne iGPU + RTX 3050 Ti 双显卡):进程内 VAAPI 每帧编码 CPU 约为 libx264(FFmpeg 管线 superfast)的 **1/12**、进程内 NVENC 的 **1/5**;外部 FFmpeg 进程管线(预编译包使用)在 AMD 上未单独验证。
高分辨率下 VAAPI 的默认 VBV 缓冲(100–500 kbit)会把关键帧压得过狠:2560×1440 H.264 VAAPI、30M
上限、静止画面上实测首个 IDR 只有 59,910 字节,画面每隔一个 GOP 糊一下再慢慢恢复。设
@@ -363,7 +479,8 @@ cargo build --release --features wayland
Omarchy 使用 Hyprland:在其用户会话中运行,设置 `UU_DESKTOP_BACKEND=wayland`,保留
`WAYLAND_DISPLAY` 和 `XDG_RUNTIME_DIR`。其他合成器可能需要 `--features wayland,portal`。
uinput 需加载内核模块(开机自动加载:`echo uinput | sudo tee /etc/modules-load.d/uinput.conf`)并应用上文 uaccess 规则;无人登录账号需要专用组的受限授权。
uinput 需加载内核模块(开机自动加载:`echo uinput | sudo tee /etc/modules-load.d/uinput.conf`)并应用上文 uaccess 规则;无人登录账号需要专用组的受限授权,
例如 `/etc/tmpfiles.d/uinput.conf` 写入 `z /dev/uinput 0660 root uinput`,再 `sudo usermod -aG uinput <用户>`(只加专用账号)。
该权限能向整个 seat(包括锁屏/登录界面)注入输入。设置 `UU_INPUT_BACKEND=uinput` 后,
仍须确认启动日志实际选择了 uinput。
@@ -384,11 +501,14 @@ Environment=UU_DESKTOP_BACKEND=wayland
WantedBy=graphical-session.target
```
单元名请保持 `uuremote-native.service`,不要写成模板单元 `[email protected]`:桌面图标和 `uuremote-server show`
固定启动这个名字(`UU_SERVICE_UNIT` 可覆盖),systemd 不会把它解析到模板实例。niri 的 `niri --session` 同样会在就绪前导入
`WAYLAND_DISPLAY`,上面的写法也适用(#55)。
VAAPI 可选包:Intel 新显卡用 `intel-media-driver`,AMD 用 `libva-mesa-driver`,`libva-utils` 提供
`vainfo`。KMS 依赖 `libdrm`。虚拟 Xfce 依赖 `xorg-server-xvfb xorg-xauth xorg-xdpyinfo
xfce4-session xfce4-panel xfdesktop xfwm4 gnome-terminal`。
滚动 Arch 的 FFmpeg 可能超出 `inproc-av` 支持的 6.x;请使用默认进程方案或独立的 FFmpeg 6 前缀,
不要降级系统 FFmpeg。
若编译包含 `viewer-ffmpeg`,滚动 Arch 的 FFmpeg 可能超出其支持的 6.x;请使用独立的 FFmpeg 6 前缀,不要降级系统 FFmpeg(服务端的 `--features inproc-av` 原生 NVENC 不依赖 FFmpeg)。
### 实验性 KMS 截屏
@@ -401,6 +521,8 @@ xfce4-session xfce4-panel xfdesktop xfwm4 gnome-terminal`。
## 实验性原生控制端(uuremote-viewer)
[SDL 控制端视频调度说明](docs/viewer-video-scheduling.md)。
`uuremote-viewer` 是 Linux 上的**控制端**:用你的 UU 账号连接并控制其他设备(官方 Windows / Mac 被控端,或本项目的 Linux 主机),
也可以凭对方的设备 ID 和验证码发起远程协助。它是实验性功能,与主机 `uuremote-server` 相互独立,默认主机构建和行为不变。
@@ -408,7 +530,8 @@ xfce4-session xfce4-panel xfdesktop xfwm4 gnome-terminal`。
`ffmpeg` 命令;SDL 桌面窗口直接同步文本剪贴板(Wayland/X11),无需额外剪贴板工具;终端功能需要本机终端程序(可用 `TERMINAL` 指定)。
从源码构建:`sudo apt install libsdl2-dev`,然后 `cargo build --release --locked --features native-viewer,viewer-sdl --bin uuremote-viewer`。
SDL 剪贴板复用桌面窗口,避免 GNOME Wayland 上临时窗口引起的 Dock 跳动(#37)。仅在桌面窗口获得焦点时同步,
SDL 剪贴板复用桌面窗口,避免 GNOME Wayland 上临时窗口引起的 Dock 跳动(#37)。niri 改用支持 data-control 的
`wl-clipboard`,不需要桌面窗口保持焦点;其他 SDL 后端仅在桌面窗口获得焦点时同步。
保留 30 KiB 文本上限;跳过不含支持的文本格式的本地选择,空文本的识别取决于 SDL2 后端。不带 SDL 的构建保留命令后端。
SDL2 同步读取选择内容,慢速的剪贴板提供者可能暂时阻塞窗口,桥接超时无法中断该原生调用。
GNOME 与官方 Mac 被控端的双向剪贴板尚未验证通过;此修改不解决被控端兼容问题。
@@ -420,11 +543,27 @@ GNOME 与官方 Mac 被控端的双向剪贴板尚未验证通过;此修改不
- 命令行:`connect DEVICE false - echo legacy [--view-only]`(桌面)、`files DEVICE ls|get|put …`、`terminal DEVICE [SESSION]`、
`terminal-ui DEVICE NAME`、`portmap DEVICE LOCAL_PORT HOST PORT`(只监听 127.0.0.1)、`power DEVICE reboot|shutdown`、`unbind DEVICE`(从账号删除设备,启动窗口「更多工具」里也有)、
`assist CONNECT_ID`(验证码从 stdin 读取一行,不能作为参数传入)。`uuremote-viewer --help` 查看全部参数。
- **安全输入 `type`**(向已打开的桌面会话注入键盘,适合锁屏 PIN / 密码;文本永不进 argv):
```sh
# 推荐:先 ui/connect 打开桌面,再 type(复用会话,不顶掉当前画面)
UU_INPUT_ENV=UU_SECRET UU_SECRET='……' \
uuremote-viewer type DEVICE [--delay-ms 40] [--omit-last 1] [--snapshot /path/out.png]
# 或:printf '%s' '……' | uuremote-viewer type DEVICE
# 只检查、不连网:uuremote-viewer type DEVICE --dry-run
# 没有正在运行的桌面会话时必须显式:--new-session(会新开连接,并顶掉已打开的桌面窗口,见上游 #30)
```
特殊键用花括号:`{Enter}` `{Tab}` `{Esc}` `{Backspace}` `{Ctrl+Alt+Del}` 等;`{{` 表示字面 `{`。
**布局**:字符按 **US QWERTY** 物理键位映射(非美式布局的符号/字母可能对不上)。
**Windows 数字 PIN**:输满位数后系统常会自动提交,一般不必再发 `{Enter}`;若只想填入、不登录,用 `--omit-last N` 省略最后 N 个字符。
日志与 `--dry-run` 输出只含长度/事件数,不含明文。复用会话时,发送约 1 秒后会保存一帧 PNG(默认写在 `$XDG_RUNTIME_DIR/uu-viewer-type/`,权限 0600),路径打在日志并打印 `snapshot=…`。
- 桌面窗口中按 Ctrl+Alt+F 打开文件窗口(复用同一连接)。`UU_VIEWER_AUDIO=0` 关闭声音,`UU_VIEWER_CLIPBOARD=0` 关闭剪贴板,
`UU_VIEWER_VIEW_ONLY=1` 只看不控,`UU_VIEWER_FFMPEG` 指定 ffmpeg 路径。
- 桌面同时提供 H.264 / H.265,由主机协商选择;`UU_VIEWER_CODEC=h264` 将 SDP 和解码能力限制为 H.264。
默认请求 4:2:0;`UU_VIEWER_CHROMA=444` 在 CONTROL 打开后请求真彩(4:4:4)。主机可能回落到 4:2:0,
以 CaptureSettingSync 回报为准。两种色度均由 FFmpeg 转为 RGB24 显示。
- 按被控端原始分辨率解码,窗口缩放使用线性过滤;被控端分辨率变化时自动重启解码器。`UU_VIEWER_SIZE=WxH` 可改为固定的留黑边画布。
SDL 远程画面窗口关闭本地输入法的文本组合,按物理键转发;输入中文时请使用被控端的输入法及其中英切换键(例如 Shift)。
Mac 目标使用 macOS 原生键码,Windows / Linux 目标保留 Windows VK。键盘按物理键位置转发,不自动把 Ctrl 改成 Command;
控制 Mac 时,PC 键盘的 Super / Win 键对应 Command。仅接受已验证的目标平台值 1(Windows / 本项目 Linux 主机)和 4(Mac),
@@ -447,3 +586,11 @@ Mac 目标使用 macOS 原生键码,Windows / Linux 目标保留 Windows VK。
| Wayland 下的桌面窗口与剪贴板 | — | — | ✅ Hyprland、KDE;GNOME 窗口正常,剪贴板已于 v0.2.3 改为 SDL 直连(#37,最终版本未重新实机验收) |
「—」表示尚未测试。重启/关机只应在可以重启的机器上使用。**未实测**:官方被控端的 H.265 / 4:4:4、多显示器。日志只记录字段号、大小和状态,不记录键盘、剪贴板、文件内容、验证码或凭据。
### 原生手柄与震动(实验性)
SDL 控制端可通过现有桌面 CONTROL 通道向 Windows 被控端转发一个映射手柄,并接收普通双路震动。
默认关闭:`UU_VIEWER_NATIVE_GAMEPAD=1` 启用手柄,`UU_VIEWER_NATIVE_RUMBLE=0` 可独立关闭震动。
不支持 Guide 键、多手柄和自适应扳机;休眠、强制退出及断网恢复尚未全面验证。
一名报告用户在一组 Windows + Steam Deck 上测试了输入、手机热点、重连与震动。
详见[协议证据、设计与限制](docs/deckpad-native-gamepad.md)。
+133
View File
@@ -0,0 +1,133 @@
//! Standalone benchmark tool measuring:
//! 1. Host Memory Copy Bandwidth & CPU Cost (What FFmpeg/Sway CPU swizzling does)
//! 2. NVENC H.265 Hardware Throughput & Latency (1920x1200 @ ultra-low-latency)
//! 3. NVENC reading a registered (pinned) host buffer
use std::time::Instant;
fn main() {
println!("=========================================================");
println!(" UU Remote Linux: Encoder Pipeline Benchmark Suite ");
println!("=========================================================");
println!();
let width: u32 = 1920;
let height: u32 = 1200;
let frames: usize = 300; // 5 seconds of 60fps video
let frame_bytes: usize = (width * height * 4) as usize;
println!("Test Configuration:");
println!(" Resolution : {}x{}", width, height);
println!(" Frame Size : {:.2} MB (ARGB32)", frame_bytes as f64 / 1024.0 / 1024.0);
println!(" Iterations : {} frames (Equivalent to 5.0s @ 60 FPS)", frames);
println!();
// Simulating XShm framebuffer
let mut host_pixels = vec![0x55u8; frame_bytes];
// Benchmark 1: CPU Memcpy (External FFmpeg stdin / Sway wlr-screencopy CPU copy baseline)
println!("[1] Baseline: CPU Frame Memcpy Overhead (IPC / Process Pipe Cost)");
let mut sink = vec![0u8; frame_bytes];
let start_memcpy = Instant::now();
for _ in 0..frames {
sink.copy_from_slice(&host_pixels);
std::hint::black_box(&sink);
}
let duration_memcpy = start_memcpy.elapsed();
let memcpy_per_frame = duration_memcpy.as_secs_f64() * 1000.0 / frames as f64;
let memcpy_gbps = (frame_bytes * frames) as f64 / duration_memcpy.as_secs_f64() / 1e9;
let cpu_load_60fps = (memcpy_per_frame / (1000.0 / 60.0)) * 100.0;
println!(" -> Total CPU copy time : {:.2?}", duration_memcpy);
println!(" -> Per-frame copy time : {:.3} ms", memcpy_per_frame);
println!(" -> Memory Bus Bandwidth : {:.2} GB/s", memcpy_gbps);
println!(" -> CPU Core Saturation : {:.1}% of 1 core consumed solely by memcpy at 60 FPS", cpu_load_60fps);
println!();
// Benchmark 2: in-process NVENC reading a registered host buffer (device copy when registration fails)
#[cfg(feature = "inproc-av")]
{
extern "C" {
fn nvenc_create(config: *const NvencConfigFFI) -> *mut std::ffi::c_void;
fn nvenc_register_host_buffer(
engine: *mut std::ffi::c_void,
host_ptr: *mut std::ffi::c_void,
size: usize,
) -> i32;
fn nvenc_encode_frame(
engine: *mut std::ffi::c_void,
input_argb: *const u8,
pitch: u32,
force_idr: i32,
out_data: *mut *const u8,
out_len: *mut u32,
) -> i32;
fn nvenc_destroy(engine: *mut std::ffi::c_void);
}
// Must match NvencConfig in c_engine/nvenc_engine.h.
#[repr(C)]
struct NvencConfigFFI {
width: u32,
height: u32,
fps: u32,
gop: u32,
cq: u32,
target_bps: i64,
max_bps: i64,
buffer_bits: i64,
is_hevc: i32,
chroma_444: i32,
}
let cfg = NvencConfigFFI {
width,
height,
fps: 60,
gop: 120,
cq: 18,
target_bps: 16_000_000,
max_bps: 30_000_000,
buffer_bits: 500_000,
is_hevc: 1, // H.265 / HEVC
chroma_444: i32::from(std::env::var("UU_BENCH_CHROMA").as_deref() == Ok("444")),
};
println!("[2] In-process NVENC H.265 encoding");
unsafe {
let engine = nvenc_create(&cfg);
if engine.is_null() {
println!(" [SKIP] NVENC driver not available on this system.");
} else {
let registered = nvenc_register_host_buffer(engine, host_pixels.as_mut_ptr() as *mut _, frame_bytes) == 0;
println!(" -> Input path : {}", if registered { "registered host buffer (DMA)" } else { "cuMemcpyHtoD copy" });
let input = if registered { std::ptr::null() } else { host_pixels.as_ptr() };
let mut out_data: *const u8 = std::ptr::null();
let mut out_len: u32 = 0;
// Warmup
let _ = nvenc_encode_frame(engine, input, width * 4, 1, &mut out_data, &mut out_len);
let start = Instant::now();
let (mut encoded_bytes, mut encoded_frames) = (0u64, 0usize);
for i in 0..frames {
if nvenc_encode_frame(engine, input, width * 4, i32::from(i == 0), &mut out_data, &mut out_len) == 0 {
encoded_bytes += u64::from(out_len);
encoded_frames += 1;
}
}
let elapsed = start.elapsed();
if encoded_frames == 0 {
println!(" [FAIL] no frame was encoded");
} else {
let per_frame = elapsed.as_secs_f64() * 1000.0 / encoded_frames as f64;
println!(" -> Encoded frames : {encoded_frames}/{frames} in {elapsed:.2?}");
println!(" -> Per-frame latency : {per_frame:.3} ms ({:.1} FPS max)", 1000.0 / per_frame);
println!(" -> Output bitrate : {:.2} Mbps average", encoded_bytes as f64 * 8.0 / elapsed.as_secs_f64() / 1e6);
if registered {
println!(" -> Host-to-device copy : none ({:.0} MB/s at 60 fps avoided)", frame_bytes as f64 * 60.0 / 1024.0 / 1024.0);
}
}
nvenc_destroy(engine);
}
}
}
}
+90 -10
View File
@@ -1,10 +1,21 @@
fn main() {
println!("cargo:rerun-if-changed=c_engine/dmabuf_frame.h");
println!("cargo:rerun-if-changed=c_engine/wayland_transform.h");
println!("cargo:rerun-if-changed=c_engine/portal_clipboard.inc");
println!("cargo:rerun-if-changed=c_engine/x11_engine.c");
println!("cargo:rerun-if-changed=c_engine/uinput_keymap.c");
println!("cargo:rerun-if-changed=c_engine/uinput_keymap.h");
println!("cargo:rerun-if-changed=c_engine/nvenc_engine.c");
println!("cargo:rerun-if-changed=c_engine/nvenc_engine.h");
println!("cargo:rerun-if-changed=vendor/ffnvcodec/ffnvcodec/dynlink_cuda.h");
println!("cargo:rerun-if-changed=vendor/ffnvcodec/ffnvcodec/nvEncodeAPI.h");
println!("cargo:rerun-if-changed=c_engine/clipboard.c");
println!("cargo:rerun-if-changed=c_engine/assist_window.c");
println!("cargo:rerun-if-changed=c_engine/privacy_wallpaper.c");
println!("cargo:rerun-if-changed=c_engine/viewer_window.c");
println!("cargo:rerun-if-changed=c_engine/viewer_tools.c");
println!("cargo:rerun-if-changed=c_engine/ui_theme.c");
println!("cargo:rerun-if-changed=c_engine/ui_theme.h");
println!("cargo:rerun-if-changed=c_engine/pam_check.c");
println!("cargo:rerun-if-env-changed=UU_NO_GTK");
println!("cargo:rustc-check-cfg=cfg(uu_gtk)");
@@ -21,11 +32,41 @@ fn main() {
build.compile("uu_kms_engine");
println!("cargo:rustc-link-lib=drm");
}
cc::Build::new()
.file("c_engine/x11_engine.c")
let mut x11_build = cc::Build::new();
x11_build.file("c_engine/x11_engine.c")
.file("c_engine/uinput_keymap.c")
.file("c_engine/clipboard.c")
.file("c_engine/pam_check.c")
.compile("x11_engine");
.file("c_engine/pam_check.c");
if std::env::var_os("CARGO_FEATURE_INPROC_AV").is_some() {
println!("cargo:rerun-if-changed=c_engine/audio_engine.c");
x11_build.file("c_engine/audio_engine.c");
let audio_flags = std::process::Command::new("pkg-config").args(["--cflags", "libpulse", "opus"])
.output().expect("inproc-av requires libpulse and opus development libraries");
assert!(audio_flags.status.success(), "inproc-av requires libpulse-dev and libopus-dev");
for flag in String::from_utf8_lossy(&audio_flags.stdout).split_whitespace() { x11_build.flag(flag); }
x11_build.file("c_engine/nvenc_engine.c");
x11_build.file("c_engine/vaapi_engine.c");
x11_build.file("c_engine/dri3_capture.c");
for f in ["c_engine/vaapi_engine.c", "c_engine/vaapi_engine.h", "c_engine/dri3_capture.c", "c_engine/dri3_capture.h"] {
println!("cargo:rerun-if-changed={f}");
}
x11_build.include("vendor/ffnvcodec");
}
x11_build.compile("x11_engine");
// libva/libva-drm are dlopen'ed at runtime (like NVENC's libcuda); these are
// link-time-only deps of the DRI3/VAAPI engines and must stay out of default builds.
if std::env::var_os("CARGO_FEATURE_INPROC_AV").is_some() {
// Emit them after the static C archive: GNU ld --as-needed would otherwise
// discard the shared libraries before libx11_engine.a references their symbols.
println!("cargo:rustc-link-lib=pulse");
println!("cargo:rustc-link-lib=opus");
println!("cargo:rustc-link-lib=gbm");
println!("cargo:rustc-link-lib=X11-xcb");
println!("cargo:rustc-link-lib=xcb");
println!("cargo:rustc-link-lib=xcb-dri3");
println!("cargo:rustc-link-lib=xcb-damage");
}
println!("cargo:rustc-link-lib=X11");
println!("cargo:rustc-link-lib=Xext");
@@ -38,7 +79,7 @@ fn main() {
match (std::env::var_os("UU_NO_GTK").is_none()).then(|| gtk("--cflags").zip(gtk("--libs"))).flatten() {
Some((cflags, libs)) => {
let mut build = cc::Build::new();
build.file("c_engine/assist_window.c").file("c_engine/viewer_window.c").file("c_engine/viewer_tools.c").flag_if_supported("-Wno-deprecated-declarations");
build.file("c_engine/assist_window.c").file("c_engine/privacy_wallpaper.c").file("c_engine/viewer_window.c").file("c_engine/viewer_tools.c").file("c_engine/ui_theme.c").flag_if_supported("-Wno-deprecated-declarations");
for flag in cflags.split_whitespace() { build.flag(flag); }
build.compile("uu_login_window");
for flag in libs.split_whitespace() {
@@ -50,7 +91,15 @@ fn main() {
}
None => println!("cargo:warning=gtk+-3.0 not found: building without the login window"),
}
if std::env::var_os("CARGO_FEATURE_PORTAL").is_some() {
let plugins = std::env::var_os("CARGO_FEATURE_ENGINE_PLUGINS").is_some();
if plugins && std::env::var_os("CARGO_FEATURE_PORTAL").is_some() {
// Runtime-loaded libuu-portal.so; skipped (with a warning) where libei >= 1.1 is unavailable.
for file in ["portal_engine.c", "portal_engine.h", "portal_eis.inc", "desktop_power.c"] { println!("cargo:rerun-if-changed=c_engine/{file}"); }
match pkg_config(&["gio-2.0", "gio-unix-2.0", "libpipewire-0.3", "libei-1.0 >= 1.1"]) {
Some((cflags, libs)) => shared_engine("libuu-portal.so", &["c_engine/portal_engine.c", "c_engine/desktop_power.c"], &[], &cflags, &libs),
None => println!("cargo:warning=GIO/PipeWire/libei >= 1.1 not found: libuu-portal.so not built"),
}
} else if std::env::var_os("CARGO_FEATURE_PORTAL").is_some() {
println!("cargo:rerun-if-changed=c_engine/portal_engine.c");
println!("cargo:rerun-if-changed=c_engine/portal_engine.h");
println!("cargo:rerun-if-changed=c_engine/portal_eis.inc");
@@ -76,6 +125,7 @@ fn main() {
let mut build = cc::Build::new();
build.flag_if_supported("-Wno-unused-parameter"); // protocol listener signatures
build.file("c_engine/wayland_engine.c").include(&out);
let mut sources = vec!["c_engine/wayland_engine.c".to_owned()];
for name in ["wlr-screencopy-unstable-v1", "wlr-virtual-pointer-unstable-v1", "virtual-keyboard-unstable-v1", "wlr-output-power-management-unstable-v1", "linux-dmabuf-unstable-v1"] {
let xml = format!("c_engine/wayland-protocols/{name}.xml");
println!("cargo:rerun-if-changed={xml}");
@@ -84,13 +134,43 @@ fn main() {
let status = std::process::Command::new("wayland-scanner").args([mode, &xml]).arg(&target).status()
.expect("Install wayland-scanner to build the Wayland backend");
assert!(status.success(), "wayland-scanner failed");
if mode == "private-code" { build.file(target); }
if mode == "private-code" { sources.push(target.to_string_lossy().into_owned()); build.file(target); }
}
}
println!("cargo:rerun-if-changed=c_engine/wayland_engine.c");
build.compile("uu_wayland_engine");
println!("cargo:rustc-link-lib=wayland-client");
println!("cargo:rustc-link-lib=xkbcommon");
if plugins {
let sources: Vec<&str> = sources.iter().map(String::as_str).collect();
match pkg_config(&["wayland-client", "xkbcommon"]) {
Some((cflags, libs)) => shared_engine("libuu-wayland.so", &sources, &[out.as_path()], &cflags, &libs),
None => println!("cargo:warning=wayland-client/xkbcommon not found: libuu-wayland.so not built"),
}
} else {
build.compile("uu_wayland_engine");
println!("cargo:rustc-link-lib=wayland-client");
println!("cargo:rustc-link-lib=xkbcommon");
}
}
}
}
/// `pkg-config --cflags` / `--libs` for `packages`, or None when any is missing.
fn pkg_config(packages: &[&str]) -> Option<(String, String)> {
let run = |kind: &str| std::process::Command::new("pkg-config").arg(kind).args(packages).output().ok()
.filter(|o| o.status.success()).map(|o| String::from_utf8_lossy(&o.stdout).into_owned());
run("--cflags").zip(run("--libs"))
}
/// Builds an engine as a shared library for engine-plugins and places it next to the binaries
/// (target/<profile>/), where the release workflow packages it. Not linked into uuremote-server.
fn shared_engine(name: &str, sources: &[&str], includes: &[&std::path::Path], cflags: &str, libs: &str) {
let out = std::path::PathBuf::from(std::env::var_os("OUT_DIR").unwrap());
let library = out.join(name);
let mut command = cc::Build::new().pic(true).opt_level(2).get_compiler().to_command();
command.args(["-shared", "-fPIC", "-Wno-unused-parameter", "-Wl,-z,defs"]).arg(format!("-Wl,-soname,{name}")).arg("-o").arg(&library);
for include in includes { command.arg("-I").arg(include); }
command.args(cflags.split_whitespace()).args(sources).args(libs.split_whitespace()).arg("-lpthread");
let status = command.status().expect("C compiler for the engine plugin");
assert!(status.success(), "building {name} failed");
// OUT_DIR = target/<profile>/build/<package>-<hash>/out
if let Some(profile) = out.ancestors().nth(3) { std::fs::copy(&library, profile.join(name)).expect("copy engine plugin"); }
}
+182 -82
View File
@@ -8,25 +8,9 @@
#include <stdlib.h>
#include <string.h>
#include <dlfcn.h>
static const char *CSS =
"window { background-color: #f5f6f8; }\n"
"* { font-family: 'Noto Sans CJK SC', 'Noto Sans SC', sans-serif; }\n"
".card { background-color: #ffffff; border-radius: 10px; border: 1px solid #e5e7eb; }\n"
".heading { font-size: 20px; font-weight: 700; color: #1d1d1f; }\n"
".key { font-size: 14px; color: #4b5563; }\n"
".big { font-size: 32px; font-weight: 800; color: #111111; }\n"
".note { font-size: 13px; color: #9ca3af; }\n"
".hint { font-size: 13px; color: #6b7280; }\n"
".footer { font-size: 12px; color: #9ca3af; }\n"
"button.flat { padding: 4px 8px; }\n"
"button.share { background-image: none; background-color: #ffffff; border: 1px solid #d1d5db;"
" border-radius: 6px; padding: 6px 14px; font-size: 14px; }\n"
"separator { background-color: #e5e7eb; min-height: 1px; }\n"
".user { font-size: 22px; font-weight: 700; color: #111111; }\n"
".status { font-size: 13px; color: #2f6bff; }\n"
".status.ok { color: #16a34a; }\n"
".status.error { color: #dc2626; }\n";
#include "i18n.h"
#include "ui_theme.h"
static void on_language(GtkComboBox *c, gpointer note);
enum { CMD_NONE = 0, CMD_ALLOW = 1, CMD_DENY = 2, CMD_RESET = 3, CMD_STOP = 4, CMD_VERIFY = 5, CMD_REFRESH = 6, CMD_CUSTOM = 7, CMD_LOGOUT = 8, CMD_QUIT = 9 };
enum { VERIFY_TEMPORARY = 0, VERIFY_CUSTOM = 1, VERIFY_BOTH = 2 };
@@ -46,7 +30,10 @@ static pthread_cond_t init_cond = PTHREAD_COND_INITIALIZER;
static GtkWidget *window, *allow_switch, *id_label, *code_label, *eye_button, *share_button, *hint_label, *verify_combo, *note_label;
static GtkWidget *refresh_items[5], *footer_label;
// Account card: QR login before sign-in, user info (+ logout) after.
static GtkWidget *assist_card, *account_card, *account_stack, *qr_stack, *qr_image, *login_status, *user_label;
static GtkWidget *assist_card, *account_card, *account_stack, *qr_stack, *qr_image, *login_status, *user_label, *qr_refresh;
/* Like the official client, a failed or timed-out QR stays until the user asks for a new one. */
static atomic_int qr_refresh_requested;
static void on_qr_refresh(GtkButton *b, gpointer d) { (void)b; (void)d; atomic_store(&qr_refresh_requested, 1); gtk_widget_hide(qr_refresh); }
static int show_assist = 1, show_account;
// Tray (host service only): AppIndicator via dlopen (no build dependency), else GtkStatusIcon.
static GtkWidget *tray_menu, *tray_allow;
@@ -54,6 +41,10 @@ static int suppress_tray;
static int cur_verify, cur_refresh, cur_has_custom;
static char current_id[64], current_code[64];
static int code_visible = 1, suppress_switch, start_hidden, close_hides;
// A problem only the person at the desktop can fix (e.g. FFmpeg missing): red line at the top.
static GtkWidget *problem_label;
static gchar *problem_text;
static pthread_mutex_t problem_lock = PTHREAD_MUTEX_INITIALIZER;
static GtkWidget *label(const char *text, const char *cls) {
GtkWidget *l = gtk_label_new(text);
@@ -89,9 +80,9 @@ static void on_custom_changed(GtkEditable *e, gpointer ok) {
// Returns 1 when a new custom code was entered and posted.
static int ask_custom_code(void) {
GtkWidget *d = gtk_dialog_new_with_buttons("设置自定义验证码", GTK_WINDOW(window), GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT,
"取消", GTK_RESPONSE_CANCEL, NULL);
GtkWidget *ok = gtk_dialog_add_button(GTK_DIALOG(d), "确定", GTK_RESPONSE_OK);
GtkWidget *d = gtk_dialog_new_with_buttons(L("设置自定义验证码", "Set custom code"), GTK_WINDOW(window), GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT,
L("取消", "Cancel"), GTK_RESPONSE_CANCEL, NULL);
GtkWidget *ok = gtk_dialog_add_button(GTK_DIALOG(d), L("确定", "OK"), GTK_RESPONSE_OK);
gtk_widget_set_sensitive(ok, FALSE);
GtkWidget *area = gtk_dialog_get_content_area(GTK_DIALOG(d));
gtk_container_set_border_width(GTK_CONTAINER(area), 16);
@@ -99,10 +90,10 @@ static int ask_custom_code(void) {
GtkWidget *entry = gtk_entry_new();
gtk_entry_set_max_length(GTK_ENTRY(entry), 16);
gtk_entry_set_visibility(GTK_ENTRY(entry), FALSE);
gtk_entry_set_placeholder_text(GTK_ENTRY(entry), "请输入自定义验证码");
gtk_entry_set_placeholder_text(GTK_ENTRY(entry), L("请输入自定义验证码", "Enter custom code"));
g_signal_connect(entry, "changed", G_CALLBACK(on_custom_changed), ok);
gtk_box_pack_start(GTK_BOX(area), entry, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(area), label("8-16 位,需同时包含字母和数字;不会自动刷新,请妥善保管", "note"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(area), label(L("8-16 位,需同时包含字母和数字;不会自动刷新,请妥善保管", "8-16 characters with both letters and digits; never refreshed automatically, keep it safe"), "note"), FALSE, FALSE, 0);
gtk_widget_show_all(d);
int done = 0;
if (gtk_dialog_run(GTK_DIALOG(d)) == GTK_RESPONSE_OK) {
@@ -133,12 +124,12 @@ static void on_refresh_item(GtkCheckMenuItem *item, gpointer data) {
}
static void on_refresh_now(GtkMenuItem *i, gpointer d) { (void)i; (void)d; post(CMD_RESET); }
static const char *REFRESH_NOTES[5] = { "每次远控结束刷新", "每小时自动刷新", "每 12 小时自动刷新", "每 24 小时自动刷新", "不自动刷新" };
static const char *refresh_note(int i) { const char *notes[5] = { L("每次远控结束刷新", "Refreshed after every remote session"), L("每小时自动刷新", "Refreshed every hour"), L("每 12 小时自动刷新", "Refreshed every 12 hours"), L("每 24 小时自动刷新", "Refreshed every 24 hours"), L("不自动刷新", "Never refreshed automatically") }; return notes[i >= 0 && i < 5 ? i : 0]; }
static void render_code(void) {
if (!code_label) return;
gtk_label_set_text(GTK_LABEL(code_label), current_code[0] ? (code_visible ? current_code : "********") : "--------");
gtk_button_set_label(GTK_BUTTON(eye_button), code_visible ? "隐藏" : "显示");
gtk_button_set_label(GTK_BUTTON(eye_button), code_visible ? L("隐藏", "Hide") : L("显示", "Show"));
}
static void copy_text(const char *text, const char *hint) {
@@ -152,19 +143,19 @@ static void on_copy_id(GtkButton *b, gpointer d) {
char digits[64]; size_t n = 0;
for (const char *p = current_id; *p && n + 1 < sizeof digits; p++) if (*p != ' ') digits[n++] = *p;
digits[n] = 0;
copy_text(digits, "已复制设备 ID");
copy_text(digits, L("已复制设备 ID", "Device ID copied"));
}
static void on_copy_code(GtkButton *b, gpointer d) { (void)b; (void)d; copy_text(current_code, "已复制验证码,请只发给信任的人"); }
static void on_copy_code(GtkButton *b, gpointer d) { (void)b; (void)d; copy_text(current_code, L("已复制验证码,请只发给信任的人", "Code copied. Only share it with people you trust")); }
static void on_eye(GtkButton *b, gpointer d) { (void)b; (void)d; code_visible = !code_visible; render_code(); }
static void on_share(GtkButton *b, gpointer d) {
(void)b; (void)d;
if (!current_id[0] || !current_code[0]) return;
char *text = g_strdup_printf("UU 远程协助\n设备 ID:%s\n验证码:%s", current_id, current_code);
char *text = g_strdup_printf(L("UU 远程协助\n设备 ID:%s\n验证码:%s", "UU Remote assistance\nDevice ID: %s\nCode: %s"), current_id, current_code);
gtk_clipboard_set_text(gtk_clipboard_get(GDK_SELECTION_CLIPBOARD), text, -1);
g_free(text);
gtk_label_set_text(GTK_LABEL(hint_label), "已复制设备 ID 和验证码,请只发给信任的人");
gtk_label_set_text(GTK_LABEL(hint_label), L("已复制设备 ID 和验证码,请只发给信任的人", "Device ID and code copied. Only share them with people you trust"));
}
static gboolean on_switch(GtkSwitch *s, gboolean state, gpointer d) {
@@ -206,10 +197,10 @@ static gboolean draw_avatar(GtkWidget *w, cairo_t *cr, gpointer d) {
static void on_logout(GtkButton *b, gpointer d) {
(void)b; (void)d;
GtkWidget *dlg = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL, GTK_MESSAGE_QUESTION, GTK_BUTTONS_OK_CANCEL,
"退出登录后,本机将从你的设备列表中下线,远程协助会改用访客身份。确定退出吗?");
L("退出登录后,本机将从你的设备列表中下线,远程协助会改用访客身份。确定退出吗?", "After signing out this computer leaves your device list and assistance switches to guest mode. Sign out?"));
if (gtk_dialog_run(GTK_DIALOG(dlg)) == GTK_RESPONSE_OK) {
post(CMD_LOGOUT);
gtk_label_set_text(GTK_LABEL(user_label), "正在退出登录…");
gtk_label_set_text(GTK_LABEL(user_label), L("正在退出登录…", "Signing out…"));
}
gtk_widget_destroy(dlg);
}
@@ -219,7 +210,7 @@ static GtkWidget *build_account_card(void) {
gtk_style_context_add_class(gtk_widget_get_style_context(card), "card");
GtkWidget *header = gtk_box_new(GTK_ORIENTATION_HORIZONTAL, 10);
gtk_container_set_border_width(GTK_CONTAINER(header), 20);
gtk_box_pack_start(GTK_BOX(header), label("账号", "heading"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(header), label(L("账号", "Account"), "heading"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(card), header, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(card), gtk_separator_new(GTK_ORIENTATION_HORIZONTAL), FALSE, FALSE, 0);
account_stack = gtk_stack_new();
@@ -236,20 +227,25 @@ static GtkWidget *build_account_card(void) {
GtkWidget *spinner = gtk_spinner_new();
gtk_spinner_start(GTK_SPINNER(spinner));
gtk_box_pack_start(GTK_BOX(loading), spinner, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(loading), label("正在获取二维码…", "note"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(loading), label(L("正在获取二维码…", "Loading QR code…"), "note"), FALSE, FALSE, 0);
gtk_stack_add_named(GTK_STACK(qr_stack), loading, "loading");
qr_image = gtk_image_new();
gtk_stack_add_named(GTK_STACK(qr_stack), qr_image, "qr");
gtk_box_pack_start(GTK_BOX(qr_page), qr_stack, FALSE, FALSE, 0);
GtkWidget *qr_text = gtk_box_new(GTK_ORIENTATION_VERTICAL, 8);
gtk_widget_set_valign(qr_text, GTK_ALIGN_CENTER);
gtk_box_pack_start(GTK_BOX(qr_text), label("扫码登录", "heading"), FALSE, FALSE, 0);
GtkWidget *cap = label("请使用网易 UU 远程 App 扫一扫登录。\n登录后本机会出现在你的设备列表中,可直接远程控制;\n远程协助在登录前后都可以使用。", "hint");
gtk_box_pack_start(GTK_BOX(qr_text), label(L("扫码登录", "Scan to sign in"), "heading"), FALSE, FALSE, 0);
GtkWidget *cap = label(L("请使用网易 UU 远程 App 扫一扫登录。\n登录后本机会出现在你的设备列表中,可直接远程控制;\n远程协助在登录前后都可以使用。", "Scan with the NetEase UU Remote app to sign in.\nAfter sign-in this computer appears in your device list and can be controlled directly;\nremote assistance works whether you are signed in or not."), "hint");
gtk_label_set_xalign(GTK_LABEL(cap), 0);
gtk_box_pack_start(GTK_BOX(qr_text), cap, FALSE, FALSE, 0);
login_status = label("", "status");
gtk_label_set_line_wrap(GTK_LABEL(login_status), TRUE);
gtk_box_pack_start(GTK_BOX(qr_text), login_status, FALSE, FALSE, 0);
qr_refresh = gtk_button_new_with_label(L("刷新二维码", "Refresh QR code"));
gtk_widget_set_halign(qr_refresh, GTK_ALIGN_START);
gtk_widget_set_no_show_all(qr_refresh, TRUE);
g_signal_connect(qr_refresh, "clicked", G_CALLBACK(on_qr_refresh), NULL);
gtk_box_pack_start(GTK_BOX(qr_text), qr_refresh, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(qr_page), qr_text, TRUE, TRUE, 0);
gtk_stack_add_named(GTK_STACK(account_stack), qr_page, "qr");
@@ -265,9 +261,9 @@ static GtkWidget *build_account_card(void) {
gtk_widget_set_valign(user_text, GTK_ALIGN_CENTER);
user_label = label("", "user");
gtk_box_pack_start(GTK_BOX(user_text), user_label, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(user_text), label("已登录 · 本机已出现在你的设备列表中", "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(user_text), label(L("已登录 · 本机已出现在你的设备列表中", "Signed in · this computer is in your device list"), "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(user_page), user_text, TRUE, TRUE, 0);
GtkWidget *logout = gtk_button_new_with_label("退出登录");
GtkWidget *logout = gtk_button_new_with_label(L("退出登录", "Sign out"));
gtk_style_context_add_class(gtk_widget_get_style_context(logout), "share");
gtk_widget_set_valign(logout, GTK_ALIGN_CENTER);
g_signal_connect(logout, "clicked", G_CALLBACK(on_logout), NULL);
@@ -287,8 +283,8 @@ static void on_tray_allow(GtkCheckMenuItem *i, gpointer d) {
static void on_tray_quit(GtkMenuItem *i, gpointer d) {
(void)i; (void)d;
GtkWidget *dlg = gtk_message_dialog_new(NULL, GTK_DIALOG_MODAL, GTK_MESSAGE_QUESTION, GTK_BUTTONS_OK_CANCEL,
"退出后本机将下线:设备列表和远程协助都无法连接,直到再次启动。确定退出吗?");
gtk_window_set_title(GTK_WINDOW(dlg), "UU 远程 Linux 主机");
L("退出后本机将下线:设备列表和远程协助都无法连接,直到再次启动。确定退出吗?", "Quitting takes this computer offline: neither the device list nor remote assistance can connect until it starts again. Quit?"));
gtk_window_set_title(GTK_WINDOW(dlg), L("UU 远程 Linux 主机", "UU Remote Linux host"));
if (gtk_dialog_run(GTK_DIALOG(dlg)) == GTK_RESPONSE_OK) post(CMD_QUIT);
gtk_widget_destroy(dlg);
}
@@ -297,20 +293,49 @@ static void on_status_menu(GtkStatusIcon *i, guint button, guint time, gpointer
(void)i; (void)button; (void)time; (void)d;
gtk_menu_popup_at_pointer(GTK_MENU(tray_menu), NULL);
}
// Monochrome tray icon that follows light/dark panels: GTK and the GNOME AppIndicator extension
// recolor "-symbolic" names, KDE recolors the ColorScheme-Text class. Installed into the user's
// hicolor theme (found by every panel's default lookup) and also offered as the icon theme path,
// so it needs no package install. KDE tries dash-trimmed names ("uu-remote-linux") in each theme
// before the next one, so the name must not trim into the colored app icon (#87).
static const char TRAY_ICON_NAME[] = "uuremote-tray-symbolic";
static const char TRAY_ICON_SVG[] =
"<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"16\" height=\"16\" viewBox=\"0 0 16 16\">"
"<style id=\"current-color-scheme\">.ColorScheme-Text{color:#232629}</style>"
"<path class=\"ColorScheme-Text\" fill=\"currentColor\" fill-rule=\"evenodd\" d=\"M2.5 2h11A1.5 1.5 0 0 1 15 3.5v7a1.5 1.5 0 0 1-1.5 1.5h-11"
"A1.5 1.5 0 0 1 1 10.5v-7A1.5 1.5 0 0 1 2.5 2zm0 1.5v7h11v-7z\"/>"
"<path class=\"ColorScheme-Text\" fill=\"currentColor\" d=\"M7.25 12h1.5v1.5H11a.75.75 0 0 1 0 1.5H5a.75.75 0 0 1 0-1.5h2.25z"
"M11.5 4.5v4l-1.35-1.35-3.1 3.1-1.2-1.2 3.1-3.1L7.5 4.5z\"/></svg>\n";
// Returns the icon theme root holding the icon ($XDG_DATA_HOME/icons), or NULL.
static gchar *write_tray_icon(void) {
gchar *root = g_build_filename(g_get_user_data_dir(), "icons", NULL);
gchar *apps = g_build_filename(root, "hicolor", "scalable", "apps", NULL);
gchar *file = g_strconcat(TRAY_ICON_NAME, ".svg", NULL);
gchar *path = g_build_filename(apps, file, NULL), *current = NULL;
// Rewriting an unchanged file would only make icon caches rescan.
int ok = g_file_get_contents(path, &current, NULL, NULL) && strcmp(current, TRAY_ICON_SVG) == 0;
if (!ok) ok = g_mkdir_with_parents(apps, 0755) == 0 && g_file_set_contents(path, TRAY_ICON_SVG, -1, NULL);
g_free(apps); g_free(file); g_free(path); g_free(current);
if (!ok) { g_free(root); return NULL; }
return root;
}
static void build_tray(void) {
tray_menu = gtk_menu_new();
GtkWidget *open = gtk_menu_item_new_with_label("打开主窗口");
GtkWidget *open = gtk_menu_item_new_with_label(L("打开主窗口", "Open main window"));
g_signal_connect(open, "activate", G_CALLBACK(on_tray_open), NULL);
tray_allow = gtk_check_menu_item_new_with_label("允许他人远程协助");
tray_allow = gtk_check_menu_item_new_with_label(L("允许他人远程协助", "Allow remote assistance"));
g_signal_connect(tray_allow, "toggled", G_CALLBACK(on_tray_allow), NULL);
GtkWidget *quit = gtk_menu_item_new_with_label("退出");
GtkWidget *quit = gtk_menu_item_new_with_label(L("退出", "Quit"));
g_signal_connect(quit, "activate", G_CALLBACK(on_tray_quit), NULL);
gtk_menu_shell_append(GTK_MENU_SHELL(tray_menu), open);
gtk_menu_shell_append(GTK_MENU_SHELL(tray_menu), tray_allow);
gtk_menu_shell_append(GTK_MENU_SHELL(tray_menu), gtk_separator_menu_item_new());
gtk_menu_shell_append(GTK_MENU_SHELL(tray_menu), quit);
gtk_widget_show_all(tray_menu);
const char *icon = gtk_icon_theme_has_icon(gtk_icon_theme_get_default(), "uu-remote-linux") ? "uu-remote-linux" : "computer";
gchar *icon_path = write_tray_icon();
if (icon_path) gtk_icon_theme_append_search_path(gtk_icon_theme_get_default(), icon_path);
const char *fallback = gtk_icon_theme_has_icon(gtk_icon_theme_get_default(), "uu-remote-linux") ? "uu-remote-linux" : "computer";
const char *icon = icon_path ? TRAY_ICON_NAME : fallback;
// StatusNotifierItem (GNOME AppIndicator extension, KDE): libayatana-appindicator3 / libappindicator3.
const char *libs[] = { "libayatana-appindicator3.so.1", "libappindicator3.so.1" };
@@ -321,9 +346,12 @@ static void build_tray(void) {
void (*set_status)(void *, int) = (void (*)(void *, int))dlsym(h, "app_indicator_set_status");
void (*set_menu)(void *, GtkMenu *) = (void (*)(void *, GtkMenu *))dlsym(h, "app_indicator_set_menu");
void (*set_title)(void *, const char *) = (void (*)(void *, const char *))dlsym(h, "app_indicator_set_title");
void (*set_theme_path)(void *, const char *) = (void (*)(void *, const char *))dlsym(h, "app_indicator_set_icon_theme_path");
if (ind_new && set_status && set_menu) {
void *ind = ind_new("uu-remote-linux", icon, 0 /* APPLICATION_STATUS */);
if (set_title) set_title(ind, "UU 远程 Linux 主机");
// Without a theme path the panel cannot find the cached icon; keep the installed one.
void *ind = ind_new("uu-remote-linux", set_theme_path ? icon : fallback, 0 /* APPLICATION_STATUS */);
if (icon_path && set_theme_path) set_theme_path(ind, icon_path);
if (set_title) set_title(ind, L("UU 远程 Linux 主机", "UU Remote Linux host"));
set_menu(ind, GTK_MENU(tray_menu));
set_status(ind, 1 /* ACTIVE */);
return; // keep the library loaded for the indicator's lifetime
@@ -333,23 +361,19 @@ static void build_tray(void) {
// XEmbed system tray (Xfce, Cinnamon, MATE...).
G_GNUC_BEGIN_IGNORE_DEPRECATIONS
GtkStatusIcon *status = gtk_status_icon_new_from_icon_name(icon);
gtk_status_icon_set_tooltip_text(status, "UU 远程 Linux 主机");
gtk_status_icon_set_title(status, "UU 远程 Linux 主机");
gtk_status_icon_set_tooltip_text(status, L("UU 远程 Linux 主机", "UU Remote Linux host"));
gtk_status_icon_set_title(status, L("UU 远程 Linux 主机", "UU Remote Linux host"));
g_signal_connect(status, "activate", G_CALLBACK(on_status_activate), NULL);
g_signal_connect(status, "popup-menu", G_CALLBACK(on_status_menu), NULL);
G_GNUC_END_IGNORE_DEPRECATIONS
}
static void build_window(void) {
GtkCssProvider *css = gtk_css_provider_new();
gtk_css_provider_load_from_data(css, CSS, -1, NULL);
gtk_style_context_add_provider_for_screen(gdk_screen_get_default(), GTK_STYLE_PROVIDER(css),
GTK_STYLE_PROVIDER_PRIORITY_APPLICATION);
g_object_unref(css);
uu_theme_init();
gtk_window_set_default_icon_name("uu-remote-linux"); // contrib/desktop icon, when installed
window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_window_set_title(GTK_WINDOW(window), "UU 远程 Linux 主机(非官方)");
gtk_window_set_title(GTK_WINDOW(window), L("UU 远程 Linux 主机(非官方)", "UU Remote Linux host (unofficial)"));
gtk_window_set_default_size(GTK_WINDOW(window), 760, -1);
gtk_window_set_resizable(GTK_WINDOW(window), FALSE);
gtk_window_set_position(GTK_WINDOW(window), GTK_WIN_POS_CENTER);
@@ -359,6 +383,11 @@ static void build_window(void) {
GtkWidget *root = gtk_box_new(GTK_ORIENTATION_VERTICAL, 10);
gtk_container_set_border_width(GTK_CONTAINER(root), 24);
gtk_container_add(GTK_CONTAINER(window), root);
problem_label = label("", "status");
gtk_style_context_add_class(gtk_widget_get_style_context(problem_label), "error");
gtk_label_set_line_wrap(GTK_LABEL(problem_label), TRUE);
gtk_label_set_max_width_chars(GTK_LABEL(problem_label), 40);
gtk_box_pack_start(GTK_BOX(root), problem_label, FALSE, FALSE, 0);
GtkWidget *card = gtk_box_new(GTK_ORIENTATION_VERTICAL, 0);
gtk_style_context_add_class(gtk_widget_get_style_context(card), "card");
@@ -368,12 +397,12 @@ static void build_window(void) {
// Header: 本设备 ... 允许他人远程协助 [switch]
GtkWidget *header = gtk_box_new(GTK_ORIENTATION_HORIZONTAL, 10);
gtk_container_set_border_width(GTK_CONTAINER(header), 20);
gtk_box_pack_start(GTK_BOX(header), label("本设备", "heading"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(header), label(L("本设备", "This device"), "heading"), FALSE, FALSE, 0);
allow_switch = gtk_switch_new();
gtk_widget_set_valign(allow_switch, GTK_ALIGN_CENTER);
g_signal_connect(allow_switch, "state-set", G_CALLBACK(on_switch), NULL);
gtk_box_pack_end(GTK_BOX(header), allow_switch, FALSE, FALSE, 0);
gtk_box_pack_end(GTK_BOX(header), label("允许他人远程协助", "key"), FALSE, FALSE, 0);
gtk_box_pack_end(GTK_BOX(header), label(L("允许他人远程协助", "Allow remote assistance"), "key"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(card), header, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(card), gtk_separator_new(GTK_ORIENTATION_HORIZONTAL), FALSE, FALSE, 0);
@@ -382,12 +411,12 @@ static void build_window(void) {
gtk_container_set_border_width(GTK_CONTAINER(body), 20);
gtk_grid_set_column_spacing(GTK_GRID(body), 48);
gtk_grid_set_row_spacing(GTK_GRID(body), 6);
gtk_grid_attach(GTK_GRID(body), label("本设备 ID", "key"), 0, 0, 1, 1);
gtk_grid_attach(GTK_GRID(body), label(L("本设备 ID", "This device's ID"), "key"), 0, 0, 1, 1);
GtkWidget *id_row = gtk_box_new(GTK_ORIENTATION_HORIZONTAL, 8);
id_label = label("获取中…", "big");
id_label = label(L("获取中…", "Loading…"), "big");
gtk_label_set_selectable(GTK_LABEL(id_label), TRUE);
gtk_box_pack_start(GTK_BOX(id_row), id_label, FALSE, FALSE, 0);
GtkWidget *copy_id = gtk_button_new_with_label("复制");
GtkWidget *copy_id = gtk_button_new_with_label(L("复制", "Copy"));
gtk_style_context_add_class(gtk_widget_get_style_context(copy_id), "flat");
gtk_widget_set_valign(copy_id, GTK_ALIGN_CENTER);
g_signal_connect(copy_id, "clicked", G_CALLBACK(on_copy_id), NULL);
@@ -395,11 +424,11 @@ static void build_window(void) {
gtk_grid_attach(GTK_GRID(body), id_row, 0, 1, 1, 1);
GtkWidget *verify_row = gtk_box_new(GTK_ORIENTATION_HORIZONTAL, 6);
gtk_box_pack_start(GTK_BOX(verify_row), label("验证方式:", "key"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(verify_row), label(L("验证方式:", "Verification:"), "key"), FALSE, FALSE, 0);
verify_combo = gtk_combo_box_text_new();
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(verify_combo), "仅使用临时验证码");
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(verify_combo), "仅使用自定义验证码");
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(verify_combo), "同时使用两种验证码");
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(verify_combo), L("仅使用临时验证码", "Temporary code only"));
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(verify_combo), L("仅使用自定义验证码", "Custom code only"));
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(verify_combo), L("同时使用两种验证码", "Use both codes"));
gtk_combo_box_set_active(GTK_COMBO_BOX(verify_combo), 0);
g_signal_connect(verify_combo, "changed", G_CALLBACK(on_verify_changed), NULL);
gtk_box_pack_start(GTK_BOX(verify_row), verify_combo, FALSE, FALSE, 0);
@@ -407,17 +436,17 @@ static void build_window(void) {
GtkWidget *code_row = gtk_box_new(GTK_ORIENTATION_HORIZONTAL, 8);
code_label = label("--------", "big");
gtk_box_pack_start(GTK_BOX(code_row), code_label, FALSE, FALSE, 0);
eye_button = gtk_button_new_with_label("隐藏");
eye_button = gtk_button_new_with_label(L("隐藏", "Hide"));
gtk_style_context_add_class(gtk_widget_get_style_context(eye_button), "flat");
g_signal_connect(eye_button, "clicked", G_CALLBACK(on_eye), NULL);
// Gear menu: 立即刷新 / 自动刷新 ▸ (每次远控结束, 每小时, 每 12 小时, 每 24 小时, 关闭) / 设置自定义验证码
GtkWidget *menu = gtk_menu_new();
GtkWidget *now = gtk_menu_item_new_with_label("立即刷新");
GtkWidget *now = gtk_menu_item_new_with_label(L("立即刷新", "Refresh now"));
g_signal_connect(now, "activate", G_CALLBACK(on_refresh_now), NULL);
gtk_menu_shell_append(GTK_MENU_SHELL(menu), now);
GtkWidget *auto_item = gtk_menu_item_new_with_label("自动刷新");
GtkWidget *auto_item = gtk_menu_item_new_with_label(L("自动刷新", "Auto refresh"));
GtkWidget *sub = gtk_menu_new();
const char *names[5] = { "每次远控结束", "每小时", "每 12 小时", "每 24 小时", "关闭" };
const char *names[5] = { L("每次远控结束", "After every remote session"), L("每小时", "Every hour"), L("每 12 小时", "Every 12 hours"), L("每 24 小时", "Every 24 hours"), L("关闭", "Close") };
GSList *group = NULL;
for (int i = 0; i < 5; i++) {
refresh_items[i] = gtk_radio_menu_item_new_with_label(group, names[i]);
@@ -427,15 +456,15 @@ static void build_window(void) {
}
gtk_menu_item_set_submenu(GTK_MENU_ITEM(auto_item), sub);
gtk_menu_shell_append(GTK_MENU_SHELL(menu), auto_item);
GtkWidget *custom_item = gtk_menu_item_new_with_label("设置自定义验证码…");
GtkWidget *custom_item = gtk_menu_item_new_with_label(L("设置自定义验证码…", "Set custom code…"));
g_signal_connect(custom_item, "activate", G_CALLBACK(on_set_custom), NULL);
gtk_menu_shell_append(GTK_MENU_SHELL(menu), custom_item);
gtk_widget_show_all(menu);
GtkWidget *gear = gtk_menu_button_new();
gtk_button_set_image(GTK_BUTTON(gear), gtk_image_new_from_icon_name("emblem-system-symbolic", GTK_ICON_SIZE_BUTTON));
gtk_widget_set_tooltip_text(gear, "刷新设置");
gtk_widget_set_tooltip_text(gear, L("刷新设置", "Refresh settings"));
gtk_menu_button_set_popup(GTK_MENU_BUTTON(gear), menu);
GtkWidget *copy_code = gtk_button_new_with_label("复制");
GtkWidget *copy_code = gtk_button_new_with_label(L("复制", "Copy"));
gtk_style_context_add_class(gtk_widget_get_style_context(copy_code), "flat");
gtk_widget_set_valign(copy_code, GTK_ALIGN_CENTER);
g_signal_connect(copy_code, "clicked", G_CALLBACK(on_copy_code), NULL);
@@ -445,10 +474,10 @@ static void build_window(void) {
gtk_box_pack_start(GTK_BOX(code_row), eye_button, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(code_row), gear, FALSE, FALSE, 0);
gtk_grid_attach(GTK_GRID(body), code_row, 1, 1, 1, 1);
note_label = label(REFRESH_NOTES[0], "note");
note_label = label(refresh_note(0), "note");
gtk_grid_attach(GTK_GRID(body), note_label, 1, 2, 1, 1);
share_button = gtk_button_new_with_label("复制并分享");
share_button = gtk_button_new_with_label(L("复制并分享", "Copy and share"));
gtk_style_context_add_class(gtk_widget_get_style_context(share_button), "share");
gtk_widget_set_valign(share_button, GTK_ALIGN_CENTER);
g_signal_connect(share_button, "clicked", G_CALLBACK(on_share), NULL);
@@ -460,23 +489,40 @@ static void build_window(void) {
account_card = build_account_card();
gtk_widget_set_margin_top(account_card, 6);
gtk_box_pack_start(GTK_BOX(root), account_card, FALSE, FALSE, 0);
footer_label = label("开源 Linux 被控端 · 非网易官方客户端 · 关闭窗口即停止远程协助", "footer");
footer_label = label(L("开源 Linux 被控端 · 非网易官方客户端 · 关闭窗口即停止远程协助", "Open-source Linux host · not an official NetEase client · closing the window stops remote assistance"), "footer");
gtk_box_pack_end(GTK_BOX(root), footer_label, FALSE, FALSE, 0);
if (close_hides) gtk_label_set_text(GTK_LABEL(footer_label), "开源 Linux 被控端 · 非网易官方客户端 · 关闭窗口后远程协助仍在后台运行");
GtkWidget *lang_row = gtk_box_new(GTK_ORIENTATION_HORIZONTAL, 8), *lang_note = label("", "note");
GtkWidget *lang = gtk_combo_box_text_new();
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(lang), "中文"); gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(lang), "English");
gtk_combo_box_set_active(GTK_COMBO_BOX(lang), uu_i18n_english());
g_signal_connect(lang, "changed", G_CALLBACK(on_language), lang_note);
gtk_box_pack_start(GTK_BOX(lang_row), label("语言 / Language", "key"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(lang_row), lang, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(lang_row), lang_note, FALSE, FALSE, 0);
gtk_box_pack_end(GTK_BOX(root), lang_row, FALSE, FALSE, 6);
gtk_box_pack_end(GTK_BOX(lang_row), uu_theme_settings_button(GTK_WINDOW(window)), FALSE, FALSE, 0);
if (close_hides) gtk_label_set_text(GTK_LABEL(footer_label), L("开源 Linux 被控端 · 非网易官方客户端 · 关闭窗口后远程协助仍在后台运行", "Open-source Linux host · not an official NetEase client · remote assistance keeps running after the window closes"));
render_code();
if (close_hides) build_tray();
gtk_widget_show_all(gtk_bin_get_child(GTK_BIN(window)));
gtk_widget_set_visible(assist_card, show_assist);
gtk_widget_set_visible(hint_label, show_assist);
gtk_widget_set_visible(account_card, show_account);
pthread_mutex_lock(&problem_lock);
gtk_label_set_text(GTK_LABEL(problem_label), problem_text ? problem_text : "");
gtk_widget_set_visible(problem_label, problem_text != NULL);
pthread_mutex_unlock(&problem_lock);
if (!start_hidden) gtk_widget_show(window);
}
static void on_language(GtkComboBox *c, gpointer note) {
int english = gtk_combo_box_get_active(c) == 1;
gtk_label_set_text(GTK_LABEL(note), english == uu_i18n_english() ? "" : !uu_i18n_save(english) ? L("无法保存语言设置", "Could not save the language")
: english ? "Restart uuremote-server to switch to English" : "重新启动 uuremote-server 后切换为中文");
}
static void *ui_main(void *arg) {
(void)arg;
int ok = gtk_init_check(NULL, NULL);
// The CSS hard-codes a light palette; a dark system theme would turn unstyled text white on white (#43).
if (ok) g_object_set(gtk_settings_get_default(), "gtk-theme-name", "Adwaita", "gtk-application-prefer-dark-theme", FALSE, NULL);
if (ok) build_window();
pthread_mutex_lock(&init_lock);
init_state = ok ? 1 : -1;
@@ -529,7 +575,7 @@ static gboolean apply_state(gpointer data) {
if (window) {
g_strlcpy(current_id, s->id, sizeof current_id);
g_strlcpy(current_code, s->code, sizeof current_code);
gtk_label_set_text(GTK_LABEL(id_label), current_id[0] ? current_id : "获取中…");
gtk_label_set_text(GTK_LABEL(id_label), current_id[0] ? current_id : L("获取中…", "Loading…"));
render_code();
suppress_switch = 1;
gtk_switch_set_active(GTK_SWITCH(allow_switch), s->allowed);
@@ -540,12 +586,12 @@ static gboolean apply_state(gpointer data) {
if (s->refresh >= 0 && s->refresh < 5) {
suppress_refresh = 1; gtk_check_menu_item_set_active(GTK_CHECK_MENU_ITEM(refresh_items[s->refresh]), TRUE); suppress_refresh = 0;
}
gtk_label_set_text(GTK_LABEL(note_label), s->verify == VERIFY_CUSTOM ? "自定义验证码不会自动刷新"
: s->verify == VERIFY_BOTH ? "也可使用自定义验证码连接" : REFRESH_NOTES[s->refresh >= 0 && s->refresh < 5 ? s->refresh : 0]);
gtk_label_set_text(GTK_LABEL(note_label), s->verify == VERIFY_CUSTOM ? L("自定义验证码不会自动刷新", "Custom code is never refreshed automatically")
: s->verify == VERIFY_BOTH ? L("也可使用自定义验证码连接", "The custom code also works") : refresh_note(s->refresh));
gtk_widget_set_sensitive(share_button, current_id[0] && current_code[0]);
gtk_label_set_text(GTK_LABEL(hint_label), s->allowed
? "对方在 UU 远程「开始协助」中输入设备 ID 和验证码即可连接"
: "已关闭:他人暂时无法远程协助本机,打开右上角开关后才能连接");
? L("对方在 UU 远程「开始协助」中输入设备 ID 和验证码即可连接", "Your partner enters the device ID and code under \"Start assistance\" in UU Remote to connect")
: L("已关闭:他人暂时无法远程协助本机,打开右上角开关后才能连接", "Off: nobody can assist this computer until you turn on the switch at the top right"));
}
g_free(s->id); g_free(s->code); g_free(s);
return G_SOURCE_REMOVE;
@@ -641,6 +687,60 @@ void uu_ui_set_user(const char *name) {
if (!ui_started || init_state != 1) return;
g_idle_add(apply_user, g_strdup(name ? name : ""));
}
static gboolean apply_qr_refresh(gpointer data) {
if (window && qr_refresh) { if (GPOINTER_TO_INT(data)) gtk_widget_show(qr_refresh); else gtk_widget_hide(qr_refresh); }
return G_SOURCE_REMOVE;
}
void uu_login_ui_offer_refresh(int visible) {
if (!ui_started || init_state != 1 || atomic_load(&closed)) return;
atomic_store(&qr_refresh_requested, 0);
g_idle_add(apply_qr_refresh, GINT_TO_POINTER(visible != 0));
}
int uu_login_ui_take_refresh(void) { return atomic_exchange(&qr_refresh_requested, 0); }
static gboolean apply_problem(gpointer data) {
(void)data;
if (window && problem_label) {
pthread_mutex_lock(&problem_lock);
gtk_label_set_text(GTK_LABEL(problem_label), problem_text ? problem_text : "");
gtk_widget_set_visible(problem_label, problem_text != NULL);
pthread_mutex_unlock(&problem_lock);
}
return G_SOURCE_REMOVE;
}
// Freedesktop notification through the session bus (no GTK main loop needed). Returns 0 when delivered.
static int notify_desktop(const char *summary, const char *body) {
GDBusConnection *bus = g_bus_get_sync(G_BUS_TYPE_SESSION, NULL, NULL);
if (!bus) return -1;
GVariantBuilder actions, hints;
g_variant_builder_init(&actions, G_VARIANT_TYPE("as"));
g_variant_builder_init(&hints, G_VARIANT_TYPE("a{sv}"));
g_variant_builder_add(&hints, "{sv}", "urgency", g_variant_new_byte(2)); // critical: stays until dismissed
GVariant *reply = g_dbus_connection_call_sync(bus, "org.freedesktop.Notifications", "/org/freedesktop/Notifications",
"org.freedesktop.Notifications", "Notify",
g_variant_new("(susssasa{sv}i)", L("UU 远程 Linux 主机", "UU Remote Linux host"), 0u, "uu-remote-linux", summary, body, &actions, &hints, -1),
G_VARIANT_TYPE("(u)"), G_DBUS_CALL_FLAGS_NONE, 3000, NULL, NULL);
g_object_unref(bus);
if (!reply) return -1;
g_variant_unref(reply);
return 0;
}
// text NULL clears the window line. notify: also tell the person now, by a desktop notification or,
// without a notification daemon (e.g. bare Xfce), by opening the host window that shows the line.
// Returns 0 notified, 1 window opened, -1 neither (no notify requested, or no daemon and no window).
int uu_ui_set_problem(const char *summary, const char *text, int notify) {
pthread_mutex_lock(&problem_lock);
g_free(problem_text);
problem_text = text ? g_strdup(text) : NULL;
pthread_mutex_unlock(&problem_lock);
int window_ready = ui_started && init_state == 1 && !atomic_load(&closed);
if (window_ready) g_idle_add(apply_problem, NULL);
if (!notify || !text) return -1;
if (notify_desktop(summary ? summary : "", text) == 0) return 0;
if (!window_ready) return -1;
uu_assist_ui_present();
return 1;
}
void uu_login_ui_set_done(const char *text) { uu_ui_set_user(text); }
int uu_login_ui_closed(void) { return atomic_load(&closed); }
void uu_login_ui_close(void) { uu_assist_ui_close(); }
+124
View File
@@ -0,0 +1,124 @@
#include <pulse/pulseaudio.h>
#include <opus/opus.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include "i18n.h"
typedef struct {
pa_mainloop *loop;
pa_context *context;
pa_stream *stream;
OpusEncoder *encoder;
char *source;
int failed, connecting;
int16_t pcm[960 * 2];
size_t filled, offset;
} UuAudio;
void uu_audio_close(UuAudio *audio) {
if (!audio) return;
if (audio->stream) {
pa_stream_disconnect(audio->stream);
pa_stream_unref(audio->stream);
}
if (audio->context) {
pa_context_disconnect(audio->context);
pa_context_unref(audio->context);
}
if (audio->loop) pa_mainloop_free(audio->loop);
if (audio->encoder) opus_encoder_destroy(audio->encoder);
free(audio->source);
free(audio);
}
static void connect_source(UuAudio *audio, const char *source) {
if (!source || !*source) { audio->failed = 1; return; }
pa_sample_spec spec = { PA_SAMPLE_S16NE, 48000, 2 };
audio->stream = pa_stream_new(audio->context, L("UU 远程音频", "UU Remote audio"), &spec, NULL);
pa_buffer_attr attr = { (uint32_t)-1, (uint32_t)-1, (uint32_t)-1, (uint32_t)-1, sizeof(audio->pcm) };
if (!audio->stream || pa_stream_connect_record(audio->stream, source, &attr,
PA_STREAM_ADJUST_LATENCY | PA_STREAM_DONT_MOVE) < 0) audio->failed = 1;
}
static void source_info(pa_context *context, const pa_source_info *info, int end, void *data) {
(void)context;
UuAudio *audio = data;
if (info && !audio->stream) connect_source(audio, info->name);
if (end && !audio->stream) audio->failed = 1;
}
static void sink_info(pa_context *context, const pa_sink_info *info, int end, void *data) {
(void)context;
UuAudio *audio = data;
if (info && !audio->stream) connect_source(audio, info->monitor_source_name);
if (end && !audio->stream) audio->failed = 1;
}
static void server_info(pa_context *context, const pa_server_info *info, void *data) {
UuAudio *audio = data;
if (!info || !info->default_sink_name) { audio->failed = 1; return; }
pa_operation *op = pa_context_get_sink_info_by_name(context, info->default_sink_name, sink_info, audio);
if (op) pa_operation_unref(op);
else audio->failed = 1;
}
UuAudio *uu_audio_open(const char *source) {
UuAudio *audio = calloc(1, sizeof(*audio));
if (!audio) return NULL;
int error;
audio->source = strdup(source);
audio->encoder = opus_encoder_create(48000, 2, OPUS_APPLICATION_RESTRICTED_LOWDELAY, &error);
audio->loop = pa_mainloop_new();
if (!audio->source || !audio->encoder || !audio->loop) goto fail;
if (opus_encoder_ctl(audio->encoder, OPUS_SET_BITRATE(128000)) != OPUS_OK) goto fail;
audio->context = pa_context_new(pa_mainloop_get_api(audio->loop), "UU Remote");
if (!audio->context || pa_context_connect(audio->context, NULL, PA_CONTEXT_NOAUTOSPAWN, NULL) < 0) goto fail;
return audio;
fail:
uu_audio_close(audio);
return NULL;
}
/* Nonblocking: the Rust worker checks cancellation between calls, including on a suspended sink. */
int uu_audio_packet(UuAudio *audio, uint8_t *packet, int capacity) {
int result;
if (pa_mainloop_iterate(audio->loop, 0, &result) < 0) return -1;
pa_context_state_t state = pa_context_get_state(audio->context);
if (!PA_CONTEXT_IS_GOOD(state) || audio->failed) return -2;
if (state != PA_CONTEXT_READY) return 0;
if (!audio->connecting) {
audio->connecting = 1;
if (strcmp(audio->source, "@DEFAULT_MONITOR@") == 0) {
pa_operation *op = pa_context_get_server_info(audio->context, server_info, audio);
if (op) pa_operation_unref(op);
else return -3;
} else {
pa_operation *op = pa_context_get_source_info_by_name(audio->context, audio->source, source_info, audio);
if (op) pa_operation_unref(op);
else return -3;
}
}
if (!audio->stream) return 0;
pa_stream_state_t stream_state = pa_stream_get_state(audio->stream);
if (!PA_STREAM_IS_GOOD(stream_state)) return -4;
if (stream_state != PA_STREAM_READY) return 0;
const void *buffer;
size_t length;
if (pa_stream_peek(audio->stream, &buffer, &length) < 0) return -5;
if (!length) return 0;
if (audio->offset > length) return -6;
size_t copy = sizeof(audio->pcm) - audio->filled;
if (copy > length - audio->offset) copy = length - audio->offset;
if (buffer) memcpy((uint8_t *)audio->pcm + audio->filled, (const uint8_t *)buffer + audio->offset, copy);
else memset((uint8_t *)audio->pcm + audio->filled, 0, copy);
audio->filled += copy;
audio->offset += copy;
if (audio->offset == length) {
if (pa_stream_drop(audio->stream) < 0) return -7;
audio->offset = 0;
}
if (audio->filled < sizeof(audio->pcm)) return 0;
audio->filled = 0;
return opus_encode(audio->encoder, audio->pcm, 960, packet, capacity);
}
+39 -4
View File
@@ -7,6 +7,8 @@
#define SESSION_DEST "org.gnome.SessionManager"
#define SESSION_PATH "/org/gnome/SessionManager"
#define SESSION_IFACE "org.gnome.SessionManager"
#define SCREENSAVER_DEST "org.freedesktop.ScreenSaver"
#define SCREENSAVER_PATH "/org/freedesktop/ScreenSaver"
enum {
UU_POWER_OK = 0,
@@ -17,6 +19,7 @@ enum {
struct uu_idle_inhibitor {
GDBusConnection *connection;
guint32 cookie;
int freedesktop; /* org.freedesktop.ScreenSaver (KDE) instead of org.gnome.SessionManager */
};
struct setup_timeout {
@@ -138,13 +141,45 @@ struct uu_idle_inhibitor *uu_desktop_idle_inhibitor_acquire(int *error_code) {
return inhibitor;
}
/* KDE (and other desktops implementing the freedesktop idle-inhibition spec): the inhibition is
also dropped by the screensaver when this private connection closes. */
struct uu_idle_inhibitor *uu_desktop_screensaver_inhibitor_acquire(int *error_code) {
if (!error_code) return NULL;
*error_code = UU_POWER_OK;
GDBusConnection *connection = private_session_bus(error_code);
if (!connection) return NULL;
GError *error = NULL;
GVariant *reply = g_dbus_connection_call_sync(
connection, SCREENSAVER_DEST, SCREENSAVER_PATH, SCREENSAVER_DEST, "Inhibit",
g_variant_new("(ss)", "uu-remote-linux", "Remote desktop session is active"),
G_VARIANT_TYPE("(u)"), G_DBUS_CALL_FLAGS_NONE, CALL_TIMEOUT_MS, NULL, &error);
g_clear_error(&error);
struct uu_idle_inhibitor *inhibitor = reply ? calloc(1, sizeof(*inhibitor)) : NULL;
if (!inhibitor) {
*error_code = UU_POWER_CALL_FAILED;
if (reply) g_variant_unref(reply);
close_private_bus(connection);
return NULL;
}
g_variant_get(reply, "(u)", &inhibitor->cookie);
g_variant_unref(reply);
inhibitor->connection = connection;
inhibitor->freedesktop = 1;
return inhibitor;
}
void uu_desktop_idle_inhibitor_release(struct uu_idle_inhibitor *inhibitor) {
if (!inhibitor) return;
GError *error = NULL;
GVariant *reply = g_dbus_connection_call_sync(
inhibitor->connection, SESSION_DEST, SESSION_PATH, SESSION_IFACE, "Uninhibit",
g_variant_new("(u)", inhibitor->cookie), G_VARIANT_TYPE("()"),
G_DBUS_CALL_FLAGS_NONE, CALL_TIMEOUT_MS, NULL, &error);
GVariant *reply = inhibitor->freedesktop
? g_dbus_connection_call_sync(
inhibitor->connection, SCREENSAVER_DEST, SCREENSAVER_PATH, SCREENSAVER_DEST, "UnInhibit",
g_variant_new("(u)", inhibitor->cookie), G_VARIANT_TYPE("()"),
G_DBUS_CALL_FLAGS_NONE, CALL_TIMEOUT_MS, NULL, &error)
: g_dbus_connection_call_sync(
inhibitor->connection, SESSION_DEST, SESSION_PATH, SESSION_IFACE, "Uninhibit",
g_variant_new("(u)", inhibitor->cookie), G_VARIANT_TYPE("()"),
G_DBUS_CALL_FLAGS_NONE, CALL_TIMEOUT_MS, NULL, &error);
if (reply) g_variant_unref(reply);
g_clear_error(&error);
+10
View File
@@ -0,0 +1,10 @@
#ifndef UU_DMABUF_FRAME_H
#define UU_DMABUF_FRAME_H
#include <stdint.h>
/* Borrowed single-plane RGB buffer. The producer retains ownership until the lease ends. */
typedef struct {
int32_t fd;
uint32_t fourcc, width, height, stride, offset, size;
uint64_t modifier;
} UuDmaFrame;
#endif
+242
View File
@@ -0,0 +1,242 @@
#include "dri3_capture.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <poll.h>
#include <X11/Xlib.h>
#include <X11/Xlib-xcb.h>
#include <xcb/xcb.h>
#include <xcb/dri3.h>
#include <xcb/damage.h>
#include <gbm.h>
struct Dri3Capture {
Display *dpy;
xcb_connection_t *conn;
xcb_screen_t *screen;
uint32_t width;
uint32_t height;
int drm_fd;
struct gbm_device *gbm;
struct gbm_bo *bo;
int bo_fd;
uint32_t stride;
xcb_pixmap_t pix;
xcb_gcontext_t gc;
xcb_damage_damage_t damage;
uint8_t damage_event_code;
};
Dri3Capture* dri3_capture_create(const char* display_name, uint32_t width, uint32_t height) {
Display *dpy = XOpenDisplay(display_name);
if (!dpy) {
fprintf(stderr, "[dri3_capture] failed to open display %s\n", display_name ? display_name : "default");
return NULL;
}
// Events are read with xcb_poll_for_event below, so XCB, not Xlib, must own the queue
XSetEventQueueOwner(dpy, XCBOwnsEventQueue);
xcb_connection_t *conn = XGetXCBConnection(dpy);
const xcb_setup_t *setup = xcb_get_setup(conn);
xcb_screen_t *screen = xcb_setup_roots_iterator(setup).data;
if (!screen) {
XCloseDisplay(dpy);
return NULL;
}
// Check the extension first: a DRI3 request on a server without it breaks the connection,
// and the Xlib cleanup below then exits the process.
const xcb_query_extension_reply_t *dri3_ext = xcb_get_extension_data(conn, &xcb_dri3_id);
if (!dri3_ext || !dri3_ext->present) {
fprintf(stderr, "[dri3_capture] DRI3 extension not supported on display\n");
XCloseDisplay(dpy);
return NULL;
}
// Query DRI3
xcb_dri3_query_version_cookie_t qvc = xcb_dri3_query_version(conn, 1, 2);
xcb_dri3_query_version_reply_t *qvr = xcb_dri3_query_version_reply(conn, qvc, NULL);
if (!qvr) {
fprintf(stderr, "[dri3_capture] DRI3 extension not supported on display\n");
XCloseDisplay(dpy);
return NULL;
}
free(qvr);
// Open DRM device via DRI3
xcb_dri3_open_cookie_t oc = xcb_dri3_open(conn, screen->root, 0);
xcb_dri3_open_reply_t *or = xcb_dri3_open_reply(conn, oc, NULL);
if (!or) {
fprintf(stderr, "[dri3_capture] xcb_dri3_open failed\n");
XCloseDisplay(dpy);
return NULL;
}
int drm_fd = xcb_dri3_open_reply_fds(conn, or)[0];
free(or);
uint32_t w = width > 0 ? width : screen->width_in_pixels;
uint32_t h = height > 0 ? height : screen->height_in_pixels;
struct gbm_device *gbm = gbm_create_device(drm_fd);
if (!gbm) {
fprintf(stderr, "[dri3_capture] gbm_create_device failed\n");
close(drm_fd);
XCloseDisplay(dpy);
return NULL;
}
struct gbm_bo *bo = gbm_bo_create(gbm, w, h, GBM_FORMAT_XRGB8888, GBM_BO_USE_RENDERING | GBM_BO_USE_LINEAR);
if (!bo) {
fprintf(stderr, "[dri3_capture] gbm_bo_create failed\n");
gbm_device_destroy(gbm);
close(drm_fd);
XCloseDisplay(dpy);
return NULL;
}
int bo_fd = gbm_bo_get_fd(bo);
uint32_t stride = gbm_bo_get_stride(bo);
xcb_pixmap_t pix = xcb_generate_id(conn);
xcb_generic_error_t *err = NULL;
// XCB takes ownership of the fd it sends and closes it after transmission; only a
// duplicate goes to X11, bo_fd stays ours for the VAAPI import and teardown.
int send_fd = fcntl(bo_fd, F_DUPFD_CLOEXEC, 3);
if (send_fd < 0) {
close(bo_fd);
gbm_bo_destroy(bo);
gbm_device_destroy(gbm);
close(drm_fd);
XCloseDisplay(dpy);
return NULL;
}
xcb_void_cookie_t pc = xcb_dri3_pixmap_from_buffer_checked(
conn, pix, screen->root, stride * h, w, h, stride, screen->root_depth, 32, send_fd
);
err = xcb_request_check(conn, pc);
if (err) {
fprintf(stderr, "[dri3_capture] xcb_dri3_pixmap_from_buffer failed: %d\n", err->error_code);
free(err);
close(bo_fd);
gbm_bo_destroy(bo);
gbm_device_destroy(gbm);
close(drm_fd);
XCloseDisplay(dpy);
return NULL;
}
xcb_gcontext_t gc = xcb_generate_id(conn);
// The default ClipByChildren copies only the root background (solid black); XShmGetImage on the root
// includes child windows, so the blit must too.
uint32_t gc_mode = XCB_SUBWINDOW_MODE_INCLUDE_INFERIORS;
xcb_create_gc(conn, gc, pix, XCB_GC_SUBWINDOW_MODE, &gc_mode);
// Setup XDamage on root window
const xcb_query_extension_reply_t *ext = xcb_get_extension_data(conn, &xcb_damage_id);
uint8_t damage_event_code = 0;
xcb_damage_damage_t damage = 0;
if (ext && ext->present) {
damage_event_code = ext->first_event;
xcb_damage_query_version(conn, 1, 1);
damage = xcb_generate_id(conn);
xcb_damage_create(conn, damage, screen->root, XCB_DAMAGE_REPORT_LEVEL_NON_EMPTY);
}
Dri3Capture* cap = (Dri3Capture*)calloc(1, sizeof(Dri3Capture));
cap->dpy = dpy;
cap->conn = conn;
cap->screen = screen;
cap->width = w;
cap->height = h;
cap->drm_fd = drm_fd;
cap->gbm = gbm;
cap->bo = bo;
cap->bo_fd = bo_fd;
cap->stride = stride;
cap->pix = pix;
cap->gc = gc;
cap->damage = damage;
cap->damage_event_code = damage_event_code;
fprintf(stderr, "[dri3_capture] Initialized: %ux%u (stride: %u, dma_fd: %d) Pure GPU Blit ready!\n",
w, h, stride, bo_fd);
return cap;
}
int dri3_capture_blit(Dri3Capture* cap) {
if (!cap) return -1;
xcb_copy_area(cap->conn, cap->screen->root, cap->pix, cap->gc, 0, 0, 0, 0, cap->width, cap->height);
// Round trip: the server has executed (and flushed to the GPU) the copy before VAAPI reads the BO;
// xcb_flush alone only sends the request.
xcb_get_input_focus_reply_t *r = xcb_get_input_focus_reply(cap->conn, xcb_get_input_focus(cap->conn), NULL);
if (!r) return -1;
free(r);
return 0;
}
int dri3_capture_wait_damage(Dri3Capture* cap, int timeout_ms) {
if (!cap) return -1;
// Check queued events
xcb_generic_event_t *ev = NULL;
int damaged = 0;
while ((ev = xcb_poll_for_event(cap->conn)) != NULL) {
if ((ev->response_type & 0x7f) == (cap->damage_event_code + XCB_DAMAGE_NOTIFY)) {
damaged = 1;
}
free(ev);
}
if (damaged) {
xcb_damage_subtract(cap->conn, cap->damage, XCB_NONE, XCB_NONE);
xcb_flush(cap->conn);
return 1;
}
int fd = xcb_get_file_descriptor(cap->conn);
struct pollfd pfd = { .fd = fd, .events = POLLIN, .revents = 0 };
int ret = poll(&pfd, 1, timeout_ms);
if (ret > 0 && (pfd.revents & POLLIN)) {
// Readable but not yet a whole event: polling again would return at once and spin a core
ev = xcb_poll_for_event(cap->conn);
if (!ev) ev = xcb_wait_for_event(cap->conn);
if (!ev) return -1;
do {
if ((ev->response_type & 0x7f) == (cap->damage_event_code + XCB_DAMAGE_NOTIFY)) {
damaged = 1;
}
free(ev);
} while ((ev = xcb_poll_for_event(cap->conn)) != NULL);
if (damaged) {
xcb_damage_subtract(cap->conn, cap->damage, XCB_NONE, XCB_NONE);
xcb_flush(cap->conn);
return 1;
}
}
return ret < 0 ? -1 : 0;
}
int dri3_capture_get_dma_fd(Dri3Capture* cap) {
return cap ? cap->bo_fd : -1;
}
uint32_t dri3_capture_get_stride(Dri3Capture* cap) {
return cap ? cap->stride : 0;
}
void dri3_capture_destroy(Dri3Capture* cap) {
if (!cap) return;
if (cap->damage) xcb_damage_destroy(cap->conn, cap->damage);
if (cap->gc) xcb_free_gc(cap->conn, cap->gc);
if (cap->pix) xcb_free_pixmap(cap->conn, cap->pix);
if (cap->bo_fd >= 0) close(cap->bo_fd);
if (cap->bo) gbm_bo_destroy(cap->bo);
if (cap->gbm) gbm_device_destroy(cap->gbm);
if (cap->drm_fd >= 0) close(cap->drm_fd);
if (cap->dpy) XCloseDisplay(cap->dpy);
free(cap);
}
+33
View File
@@ -0,0 +1,33 @@
#ifndef UU_DRI3_CAPTURE_H
#define UU_DRI3_CAPTURE_H
#include <stdint.h>
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef struct Dri3Capture Dri3Capture;
Dri3Capture* dri3_capture_create(const char* display_name, uint32_t width, uint32_t height);
// Trigger GPU blit from Root Window to the DRI3 DMA-BUF Pixmap.
// Returns 0 on success, negative on error.
int dri3_capture_blit(Dri3Capture* cap);
// Wait for next XDamage event or timeout (ms).
// Returns 1 if damaged, 0 if timeout, negative on error.
int dri3_capture_wait_damage(Dri3Capture* cap, int timeout_ms);
// Get the exported DMA-BUF file descriptor and stride
int dri3_capture_get_dma_fd(Dri3Capture* cap);
uint32_t dri3_capture_get_stride(Dri3Capture* cap);
void dri3_capture_destroy(Dri3Capture* cap);
#ifdef __cplusplus
}
#endif
#endif // UU_DRI3_CAPTURE_H
+8
View File
@@ -0,0 +1,8 @@
// Chinese / English UI text. The language is decided once on the Rust side (src/i18n.rs: UU_LANG, the
// choice saved in settings, then the locale) so the GTK windows and Rust messages always agree.
#ifndef UU_I18N_H
#define UU_I18N_H
int uu_i18n_english(void);
int uu_i18n_save(int english);
#define L(zh, en) (uu_i18n_english() ? (en) : (zh))
#endif
+580
View File
@@ -0,0 +1,580 @@
#include "nvenc_engine.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <dlfcn.h>
#include <ffnvcodec/dynlink_cuda.h>
#include <ffnvcodec/nvEncodeAPI.h>
// Struct revisions come from the vendored nvEncodeAPI.h (*_VER macros), so the session must be
// opened with that header's NVENCAPI_VERSION; older drivers are rejected in nvenc_create.
#define CU_MEMHOSTREGISTER_DEVICEMAP 0x02
typedef CUresult CUDAAPI (*tcuMemHostRegister)(void *p, size_t bytesize, unsigned int Flags);
typedef CUresult CUDAAPI (*tcuMemHostGetDevicePointer)(CUdeviceptr *pdptr, void *p, unsigned int Flags);
typedef CUresult CUDAAPI (*tcuMemHostUnregister)(void *p);
typedef NVENCSTATUS NVENCAPI (*tNvEncodeAPICreateInstance)(NV_ENCODE_API_FUNCTION_LIST *functionList);
typedef NVENCSTATUS NVENCAPI (*tNvEncodeAPIGetMaxSupportedVersion)(uint32_t *version);
struct NvencEngine {
void *cuda_lib;
void *nvenc_lib;
tcuInit *cuInit;
tcuDeviceGet *cuDeviceGet;
tcuDevicePrimaryCtxRetain *cuDevicePrimaryCtxRetain;
tcuDevicePrimaryCtxRelease *cuDevicePrimaryCtxRelease;
tcuCtxCreate_v2 *cuCtxCreate;
tcuCtxDestroy_v2 *cuCtxDestroy;
tcuCtxPushCurrent_v2 *cuCtxPushCurrent;
tcuCtxPopCurrent_v2 *cuCtxPopCurrent;
tcuMemAlloc_v2 *cuMemAlloc;
tcuMemFree_v2 *cuMemFree;
tcuMemcpyHtoD_v2 *cuMemcpyHtoD;
tcuMemHostRegister cuMemHostRegister;
tcuMemHostGetDevicePointer cuMemHostGetDevicePointer;
tcuMemHostUnregister cuMemHostUnregister;
CUdevice dev;
CUcontext cu_ctx;
int is_standalone_ctx; // cuCtxCreate fallback (primary context unavailable, seen on GB10)
CUdeviceptr cu_dptr;
size_t frame_bytes;
// Pinned XShm buffer registered for direct DMA reads
void *registered_host_ptr;
int is_zero_copy;
NV_ENCODE_API_FUNCTION_LIST fn;
void *encoder;
NV_ENC_REGISTER_RESOURCE reg_res;
NV_ENC_OUTPUT_PTR bitstream_buf;
uint32_t width;
uint32_t height;
int is_hevc;
uint8_t *output_staging;
size_t output_staging_cap;
};
// Returns 1 when the context was pushed; pop only in that case.
static int ctx_push(NvencEngine *engine) {
return engine->cuCtxPushCurrent && engine->cu_ctx && engine->cuCtxPushCurrent(engine->cu_ctx) == CUDA_SUCCESS;
}
static void ctx_pop(NvencEngine *engine, int pushed) {
if (pushed && engine->cuCtxPopCurrent) {
CUcontext dummy = NULL;
engine->cuCtxPopCurrent(&dummy);
}
}
NvencEngine* nvenc_create(const NvencConfig* config) {
if (!config || config->width == 0 || config->height == 0) {
return NULL;
}
NvencEngine *engine = (NvencEngine*)calloc(1, sizeof(NvencEngine));
if (!engine) return NULL;
engine->width = config->width;
engine->height = config->height;
engine->is_hevc = config->is_hevc;
// 1. Load CUDA driver
engine->cuda_lib = dlopen("libcuda.so.1", RTLD_NOW);
if (!engine->cuda_lib) {
fprintf(stderr, "[nvenc] dlopen libcuda.so.1 failed\n");
free(engine);
return NULL;
}
engine->cuInit = (tcuInit*)dlsym(engine->cuda_lib, "cuInit");
engine->cuDeviceGet = (tcuDeviceGet*)dlsym(engine->cuda_lib, "cuDeviceGet");
engine->cuDevicePrimaryCtxRetain = (tcuDevicePrimaryCtxRetain*)dlsym(engine->cuda_lib, "cuDevicePrimaryCtxRetain");
engine->cuDevicePrimaryCtxRelease = (tcuDevicePrimaryCtxRelease*)dlsym(engine->cuda_lib, "cuDevicePrimaryCtxRelease_v2");
if (!engine->cuDevicePrimaryCtxRelease)
engine->cuDevicePrimaryCtxRelease = (tcuDevicePrimaryCtxRelease*)dlsym(engine->cuda_lib, "cuDevicePrimaryCtxRelease");
engine->cuCtxCreate = (tcuCtxCreate_v2*)dlsym(engine->cuda_lib, "cuCtxCreate_v2");
engine->cuCtxDestroy = (tcuCtxDestroy_v2*)dlsym(engine->cuda_lib, "cuCtxDestroy_v2");
engine->cuCtxPushCurrent = (tcuCtxPushCurrent_v2*)dlsym(engine->cuda_lib, "cuCtxPushCurrent_v2");
engine->cuCtxPopCurrent = (tcuCtxPopCurrent_v2*)dlsym(engine->cuda_lib, "cuCtxPopCurrent_v2");
engine->cuMemAlloc = (tcuMemAlloc_v2*)dlsym(engine->cuda_lib, "cuMemAlloc_v2");
engine->cuMemFree = (tcuMemFree_v2*)dlsym(engine->cuda_lib, "cuMemFree_v2");
engine->cuMemcpyHtoD = (tcuMemcpyHtoD_v2*)dlsym(engine->cuda_lib, "cuMemcpyHtoD_v2");
engine->cuMemHostRegister = (tcuMemHostRegister)dlsym(engine->cuda_lib, "cuMemHostRegister_v2");
engine->cuMemHostGetDevicePointer = (tcuMemHostGetDevicePointer)dlsym(engine->cuda_lib, "cuMemHostGetDevicePointer_v2");
engine->cuMemHostUnregister = (tcuMemHostUnregister)dlsym(engine->cuda_lib, "cuMemHostUnregister");
if (!engine->cuInit || !engine->cuDeviceGet || !engine->cuDevicePrimaryCtxRetain ||
!engine->cuDevicePrimaryCtxRelease || !engine->cuCtxPushCurrent || !engine->cuCtxPopCurrent ||
!engine->cuMemAlloc || !engine->cuMemFree || !engine->cuMemcpyHtoD) {
fprintf(stderr, "[nvenc] Missing CUDA driver symbols\n");
nvenc_destroy(engine);
return NULL;
}
CUresult cures = engine->cuInit(0);
if (cures != CUDA_SUCCESS) {
fprintf(stderr, "[nvenc] cuInit failed: %d\n", cures);
nvenc_destroy(engine);
return NULL;
}
cures = engine->cuDeviceGet(&engine->dev, 0);
if (cures != CUDA_SUCCESS) {
fprintf(stderr, "[nvenc] cuDeviceGet failed: %d\n", cures);
nvenc_destroy(engine);
return NULL;
}
cures = engine->cuDevicePrimaryCtxRetain(&engine->cu_ctx, engine->dev);
if ((cures != CUDA_SUCCESS || !engine->cu_ctx) && engine->cuCtxCreate && engine->cuCtxDestroy) {
engine->cu_ctx = NULL;
// cuCtxCreate makes the new context current; the push below makes it current again
cures = engine->cuCtxCreate(&engine->cu_ctx, 0, engine->dev);
if (cures == CUDA_SUCCESS && engine->cu_ctx) {
CUcontext dummy = NULL;
engine->cuCtxPopCurrent(&dummy);
engine->is_standalone_ctx = 1;
}
}
if (cures != CUDA_SUCCESS || !engine->cu_ctx) {
fprintf(stderr, "[nvenc] CUDA context creation failed: %d\n", cures);
engine->cu_ctx = NULL;
nvenc_destroy(engine);
return NULL;
}
int pushed = ctx_push(engine);
if (!pushed) {
fprintf(stderr, "[nvenc] cuCtxPushCurrent failed\n");
nvenc_destroy(engine);
return NULL;
}
// 2. Load NVENC
engine->nvenc_lib = dlopen("libnvidia-encode.so.1", RTLD_NOW);
if (!engine->nvenc_lib) {
fprintf(stderr, "[nvenc] dlopen libnvidia-encode.so.1 failed\n");
goto fail;
}
// Like FFmpeg: the driver must support the header's API version, otherwise fall back.
tNvEncodeAPIGetMaxSupportedVersion get_max_ver = (tNvEncodeAPIGetMaxSupportedVersion)dlsym(
engine->nvenc_lib, "NvEncodeAPIGetMaxSupportedVersion");
uint32_t max_supported_ver = 0;
if (!get_max_ver || get_max_ver(&max_supported_ver) != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] NvEncodeAPIGetMaxSupportedVersion failed\n");
goto fail;
}
if (max_supported_ver < ((NVENCAPI_MAJOR_VERSION << 4) | NVENCAPI_MINOR_VERSION)) {
fprintf(stderr, "[nvenc] Driver NVENC API %u.%u is older than required %d.%d; update the NVIDIA driver\n",
max_supported_ver >> 4, max_supported_ver & 0xf, NVENCAPI_MAJOR_VERSION, NVENCAPI_MINOR_VERSION);
goto fail;
}
tNvEncodeAPICreateInstance create_inst = (tNvEncodeAPICreateInstance)dlsym(engine->nvenc_lib, "NvEncodeAPICreateInstance");
if (!create_inst) {
fprintf(stderr, "[nvenc] dlsym NvEncodeAPICreateInstance failed\n");
goto fail;
}
memset(&engine->fn, 0, sizeof(engine->fn));
engine->fn.version = NV_ENCODE_API_FUNCTION_LIST_VER;
NVENCSTATUS nvres = create_inst(&engine->fn);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] NvEncodeAPICreateInstance failed: %d\n", nvres);
goto fail;
}
// 3. Open Encode Session
NV_ENC_OPEN_ENCODE_SESSION_EX_PARAMS open_params;
memset(&open_params, 0, sizeof(open_params));
open_params.version = NV_ENC_OPEN_ENCODE_SESSION_EX_PARAMS_VER;
open_params.deviceType = NV_ENC_DEVICE_TYPE_CUDA;
open_params.device = engine->cu_ctx;
open_params.apiVersion = NVENCAPI_VERSION;
nvres = engine->fn.nvEncOpenEncodeSessionEx(&open_params, &engine->encoder);
if (nvres != NV_ENC_SUCCESS || !engine->encoder) {
fprintf(stderr, "[nvenc] nvEncOpenEncodeSessionEx failed: %d\n", nvres);
engine->encoder = NULL;
goto fail;
}
// 4. Query Preset Config
GUID codec_guid = engine->is_hevc ? NV_ENC_CODEC_HEVC_GUID : NV_ENC_CODEC_H264_GUID;
NV_ENC_PRESET_CONFIG preset_cfg;
memset(&preset_cfg, 0, sizeof(preset_cfg));
preset_cfg.version = NV_ENC_PRESET_CONFIG_VER;
preset_cfg.presetCfg.version = NV_ENC_CONFIG_VER;
nvres = engine->fn.nvEncGetEncodePresetConfigEx(
engine->encoder,
codec_guid,
NV_ENC_PRESET_P4_GUID,
NV_ENC_TUNING_INFO_ULTRA_LOW_LATENCY,
&preset_cfg
);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncGetEncodePresetConfigEx failed: %d\n", nvres);
goto fail;
}
NV_ENC_CONFIG enc_cfg;
memcpy(&enc_cfg, &preset_cfg.presetCfg, sizeof(NV_ENC_CONFIG));
enc_cfg.gopLength = config->gop > 0 ? config->gop : NVENC_INFINITE_GOPLENGTH;
enc_cfg.frameIntervalP = 1; // Strict low-latency: zero B-frames
enc_cfg.rcParams.rateControlMode = NV_ENC_PARAMS_RC_VBR;
enc_cfg.rcParams.averageBitRate = (uint32_t)(config->target_bps > 0 ? config->target_bps : 10000000);
enc_cfg.rcParams.maxBitRate = (uint32_t)(config->max_bps > 0 ? config->max_bps : 15000000);
enc_cfg.rcParams.vbvBufferSize = (uint32_t)(config->buffer_bits > 0 ? config->buffer_bits : (config->max_bps > 0 ? config->max_bps / 10 : 1500000));
enc_cfg.rcParams.targetQuality = (uint8_t)(config->cq > 0 ? config->cq : 28);
NV_ENC_CAPS_PARAM caps_param;
memset(&caps_param, 0, sizeof(caps_param));
caps_param.version = NV_ENC_CAPS_PARAM_VER;
int caps_val = 0;
if (config->chroma_444) {
// GPUs without 4:4:4 encode fail here; the caller falls back to FFmpeg/libx264, which keep 4:4:4.
caps_param.capsToQuery = NV_ENC_CAPS_SUPPORT_YUV444_ENCODE;
if (engine->fn.nvEncGetEncodeCaps(engine->encoder, codec_guid, &caps_param, &caps_val) != NV_ENC_SUCCESS || caps_val <= 0) {
fprintf(stderr, "[nvenc] 4:4:4 encoding not supported for this codec\n");
goto fail;
}
// NVENC rejects AQ / temporal AQ in 4:4:4 mode.
enc_cfg.rcParams.enableAQ = 0;
enc_cfg.rcParams.enableTemporalAQ = 0;
} else {
enc_cfg.rcParams.enableAQ = 1;
// Temporal AQ only where the hardware/codec reports it
caps_param.capsToQuery = NV_ENC_CAPS_SUPPORT_TEMPORAL_AQ;
caps_val = 0;
enc_cfg.rcParams.enableTemporalAQ =
engine->fn.nvEncGetEncodeCaps(engine->encoder, codec_guid, &caps_param, &caps_val) == NV_ENC_SUCCESS && caps_val > 0;
}
if (engine->is_hevc) {
enc_cfg.profileGUID = config->chroma_444 ? NV_ENC_HEVC_PROFILE_FREXT_GUID : NV_ENC_HEVC_PROFILE_MAIN_GUID;
enc_cfg.encodeCodecConfig.hevcConfig.chromaFormatIDC = config->chroma_444 ? 3 : 1;
enc_cfg.encodeCodecConfig.hevcConfig.idrPeriod = enc_cfg.gopLength;
enc_cfg.encodeCodecConfig.hevcConfig.repeatSPSPPS = 1;
enc_cfg.encodeCodecConfig.hevcConfig.outputAUD = 1;
} else {
enc_cfg.profileGUID = config->chroma_444 ? NV_ENC_H264_PROFILE_HIGH_444_GUID : NV_ENC_H264_PROFILE_BASELINE_GUID;
enc_cfg.encodeCodecConfig.h264Config.chromaFormatIDC = config->chroma_444 ? 3 : 1;
enc_cfg.encodeCodecConfig.h264Config.idrPeriod = enc_cfg.gopLength;
enc_cfg.encodeCodecConfig.h264Config.repeatSPSPPS = 1;
enc_cfg.encodeCodecConfig.h264Config.outputAUD = 1;
}
// 5. Initialize Encoder
NV_ENC_INITIALIZE_PARAMS init_params;
memset(&init_params, 0, sizeof(init_params));
init_params.version = NV_ENC_INITIALIZE_PARAMS_VER;
init_params.encodeGUID = codec_guid;
init_params.presetGUID = NV_ENC_PRESET_P4_GUID;
init_params.encodeWidth = engine->width;
init_params.encodeHeight = engine->height;
init_params.darWidth = engine->width;
init_params.darHeight = engine->height;
init_params.frameRateNum = config->fps > 0 ? config->fps : 60;
init_params.frameRateDen = 1;
init_params.enablePTD = 1;
init_params.tuningInfo = NV_ENC_TUNING_INFO_ULTRA_LOW_LATENCY;
init_params.encodeConfig = &enc_cfg;
nvres = engine->fn.nvEncInitializeEncoder(engine->encoder, &init_params);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncInitializeEncoder failed: %d\n", nvres);
goto fail;
}
// 6. Device input buffer (ARGB32), used until a host buffer is registered
engine->frame_bytes = (size_t)engine->width * engine->height * 4;
cures = engine->cuMemAlloc(&engine->cu_dptr, engine->frame_bytes);
if (cures != CUDA_SUCCESS) {
fprintf(stderr, "[nvenc] cuMemAlloc failed: %d\n", cures);
engine->cu_dptr = 0;
goto fail;
}
memset(&engine->reg_res, 0, sizeof(engine->reg_res));
engine->reg_res.version = NV_ENC_REGISTER_RESOURCE_VER;
engine->reg_res.resourceType = NV_ENC_INPUT_RESOURCE_TYPE_CUDADEVICEPTR;
engine->reg_res.width = engine->width;
engine->reg_res.height = engine->height;
engine->reg_res.pitch = engine->width * 4;
engine->reg_res.resourceToRegister = (void*)engine->cu_dptr;
engine->reg_res.bufferFormat = NV_ENC_BUFFER_FORMAT_ARGB;
nvres = engine->fn.nvEncRegisterResource(engine->encoder, &engine->reg_res);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncRegisterResource failed: %d\n", nvres);
engine->reg_res.registeredResource = NULL;
goto fail;
}
// 7. Create bitstream output buffer
NV_ENC_CREATE_BITSTREAM_BUFFER bs_buf;
memset(&bs_buf, 0, sizeof(bs_buf));
bs_buf.version = NV_ENC_CREATE_BITSTREAM_BUFFER_VER;
nvres = engine->fn.nvEncCreateBitstreamBuffer(engine->encoder, &bs_buf);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncCreateBitstreamBuffer failed: %d\n", nvres);
goto fail;
}
engine->bitstream_buf = bs_buf.bitstreamBuffer;
engine->output_staging_cap = 2 * 1024 * 1024;
engine->output_staging = (uint8_t*)malloc(engine->output_staging_cap);
if (!engine->output_staging) {
fprintf(stderr, "[nvenc] output buffer allocation failed\n");
goto fail;
}
ctx_pop(engine, pushed);
return engine;
fail:
// Pop the creation push first; nvenc_destroy pushes and pops on its own.
ctx_pop(engine, pushed);
nvenc_destroy(engine);
return NULL;
}
int nvenc_register_host_buffer(NvencEngine* engine, void* host_ptr, size_t size) {
if (!engine || !host_ptr || size < engine->frame_bytes) {
return -1;
}
if (!engine->cuMemHostRegister || !engine->cuMemHostGetDevicePointer || !engine->cuMemHostUnregister) {
return -2;
}
int pushed = ctx_push(engine);
if (!pushed) return -2;
// If already registered, unregister first
nvenc_unregister_host_buffer(engine);
CUresult cures = engine->cuMemHostRegister(host_ptr, size, CU_MEMHOSTREGISTER_DEVICEMAP);
if (cures != CUDA_SUCCESS) {
fprintf(stderr, "[nvenc] cuMemHostRegister failed: %d\n", cures);
ctx_pop(engine, pushed);
return -3;
}
CUdeviceptr dev_ptr = 0;
cures = engine->cuMemHostGetDevicePointer(&dev_ptr, host_ptr, 0);
if (cures != CUDA_SUCCESS || dev_ptr == 0) {
fprintf(stderr, "[nvenc] cuMemHostGetDevicePointer failed: %d\n", cures);
engine->cuMemHostUnregister(host_ptr);
ctx_pop(engine, pushed);
return -4;
}
// Register the pinned buffer before releasing the device buffer, so a failure keeps the copy path working
NV_ENC_REGISTER_RESOURCE new_reg;
memset(&new_reg, 0, sizeof(new_reg));
new_reg.version = NV_ENC_REGISTER_RESOURCE_VER;
new_reg.resourceType = NV_ENC_INPUT_RESOURCE_TYPE_CUDADEVICEPTR;
new_reg.width = engine->width;
new_reg.height = engine->height;
new_reg.pitch = engine->width * 4;
new_reg.resourceToRegister = (void*)dev_ptr;
new_reg.bufferFormat = NV_ENC_BUFFER_FORMAT_ARGB;
NVENCSTATUS nvres = engine->fn.nvEncRegisterResource(engine->encoder, &new_reg);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncRegisterResource (pinned host) failed: %d\n", nvres);
engine->cuMemHostUnregister(host_ptr);
ctx_pop(engine, pushed);
return -5;
}
if (engine->reg_res.registeredResource) {
engine->fn.nvEncUnregisterResource(engine->encoder, engine->reg_res.registeredResource);
}
if (engine->cu_dptr) {
engine->cuMemFree(engine->cu_dptr);
engine->cu_dptr = 0;
}
engine->reg_res = new_reg;
engine->registered_host_ptr = host_ptr;
engine->is_zero_copy = 1;
ctx_pop(engine, pushed);
return 0;
}
// Caller has the context current.
void nvenc_unregister_host_buffer(NvencEngine* engine) {
if (!engine || !engine->is_zero_copy) return;
if (engine->reg_res.registeredResource && engine->encoder) {
engine->fn.nvEncUnregisterResource(engine->encoder, engine->reg_res.registeredResource);
memset(&engine->reg_res, 0, sizeof(engine->reg_res));
}
if (engine->registered_host_ptr && engine->cuMemHostUnregister) {
engine->cuMemHostUnregister(engine->registered_host_ptr);
engine->registered_host_ptr = NULL;
}
engine->is_zero_copy = 0;
}
int nvenc_encode_frame(
NvencEngine* engine,
const uint8_t* input_argb,
uint32_t pitch,
int force_idr,
const uint8_t** out_data,
uint32_t* out_len
) {
if (!engine || !out_data || !out_len || !engine->reg_res.registeredResource) {
return -1;
}
*out_data = NULL;
*out_len = 0;
int pushed = ctx_push(engine);
if (!pushed) return -1;
// Without a registered host buffer, copy the frame into the device buffer
if (!engine->is_zero_copy) {
if (!input_argb) {
ctx_pop(engine, pushed);
return -1;
}
CUresult cures = CUDA_SUCCESS;
if (pitch == engine->width * 4) {
cures = engine->cuMemcpyHtoD(engine->cu_dptr, input_argb, engine->frame_bytes);
} else {
for (uint32_t y = 0; y < engine->height && cures == CUDA_SUCCESS; y++) {
cures = engine->cuMemcpyHtoD(
engine->cu_dptr + (size_t)y * engine->width * 4,
input_argb + (size_t)y * pitch,
engine->width * 4
);
}
}
if (cures != CUDA_SUCCESS) {
fprintf(stderr, "[nvenc] cuMemcpyHtoD failed: %d\n", cures);
ctx_pop(engine, pushed);
return -2;
}
}
NV_ENC_MAP_INPUT_RESOURCE map_res;
memset(&map_res, 0, sizeof(map_res));
map_res.version = NV_ENC_MAP_INPUT_RESOURCE_VER;
map_res.registeredResource = engine->reg_res.registeredResource;
NVENCSTATUS nvres = engine->fn.nvEncMapInputResource(engine->encoder, &map_res);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncMapInputResource failed: %d\n", nvres);
ctx_pop(engine, pushed);
return -3;
}
NV_ENC_PIC_PARAMS pic_params;
memset(&pic_params, 0, sizeof(pic_params));
pic_params.version = NV_ENC_PIC_PARAMS_VER;
pic_params.inputWidth = engine->width;
pic_params.inputHeight = engine->height;
pic_params.inputPitch = engine->width * 4;
pic_params.inputBuffer = map_res.mappedResource;
pic_params.outputBitstream = engine->bitstream_buf;
pic_params.bufferFmt = NV_ENC_BUFFER_FORMAT_ARGB;
pic_params.pictureStruct = NV_ENC_PIC_STRUCT_FRAME;
if (force_idr) {
pic_params.encodePicFlags = NV_ENC_PIC_FLAG_FORCEIDR;
}
nvres = engine->fn.nvEncEncodePicture(engine->encoder, &pic_params);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncEncodePicture failed: %d\n", nvres);
engine->fn.nvEncUnmapInputResource(engine->encoder, map_res.mappedResource);
ctx_pop(engine, pushed);
return -4;
}
NV_ENC_LOCK_BITSTREAM lock_bs;
memset(&lock_bs, 0, sizeof(lock_bs));
lock_bs.version = NV_ENC_LOCK_BITSTREAM_VER;
lock_bs.outputBitstream = engine->bitstream_buf;
lock_bs.doNotWait = 0;
nvres = engine->fn.nvEncLockBitstream(engine->encoder, &lock_bs);
if (nvres != NV_ENC_SUCCESS) {
fprintf(stderr, "[nvenc] nvEncLockBitstream failed: %d\n", nvres);
engine->fn.nvEncUnmapInputResource(engine->encoder, map_res.mappedResource);
ctx_pop(engine, pushed);
return -5;
}
int rc = 0;
uint32_t size = lock_bs.bitstreamSizeInBytes;
if (size > engine->output_staging_cap) {
size_t cap = (size_t)size + 64 * 1024;
uint8_t *grown = (uint8_t*)realloc(engine->output_staging, cap);
if (grown) {
engine->output_staging = grown;
engine->output_staging_cap = cap;
} else {
fprintf(stderr, "[nvenc] output buffer allocation failed: %u bytes\n", size);
rc = -6;
}
}
if (rc == 0 && size > 0 && lock_bs.bitstreamBufferPtr) {
memcpy(engine->output_staging, lock_bs.bitstreamBufferPtr, size);
*out_data = engine->output_staging;
*out_len = size;
}
engine->fn.nvEncUnlockBitstream(engine->encoder, engine->bitstream_buf);
// The SDK allows unmapping only after the bitstream lock returned for this picture
engine->fn.nvEncUnmapInputResource(engine->encoder, map_res.mappedResource);
ctx_pop(engine, pushed);
return rc;
}
void nvenc_destroy(NvencEngine* engine) {
if (!engine) return;
int pushed = ctx_push(engine);
// Without a current context the NVENC/CUDA objects cannot be released safely; leak them.
if (pushed) {
if (engine->bitstream_buf && engine->encoder) {
engine->fn.nvEncDestroyBitstreamBuffer(engine->encoder, engine->bitstream_buf);
engine->bitstream_buf = NULL;
}
nvenc_unregister_host_buffer(engine);
if (engine->reg_res.registeredResource && engine->encoder) {
engine->fn.nvEncUnregisterResource(engine->encoder, engine->reg_res.registeredResource);
memset(&engine->reg_res, 0, sizeof(engine->reg_res));
}
if (engine->cu_dptr) {
engine->cuMemFree(engine->cu_dptr);
engine->cu_dptr = 0;
}
if (engine->encoder) {
engine->fn.nvEncDestroyEncoder(engine->encoder);
engine->encoder = NULL;
}
ctx_pop(engine, pushed);
}
if (engine->cu_ctx) {
if (engine->is_standalone_ctx) engine->cuCtxDestroy(engine->cu_ctx);
else engine->cuDevicePrimaryCtxRelease(engine->dev);
engine->cu_ctx = NULL;
}
free(engine->output_staging);
// libcuda/libnvidia-encode stay loaded: their driver threads outlive the session, and
// dlclose crashed them on the next encoder start (SEGV_MAPERR in libnvcuvid).
free(engine);
}
+59
View File
@@ -0,0 +1,59 @@
#ifndef UU_NVENC_ENGINE_H
#define UU_NVENC_ENGINE_H
#include <stdint.h>
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef struct NvencEngine NvencEngine;
typedef struct {
uint32_t width;
uint32_t height;
uint32_t fps;
uint32_t gop;
uint32_t cq;
int64_t target_bps;
int64_t max_bps;
int64_t buffer_bits;
int is_hevc; // 1 = H.265, 0 = H.264
int chroma_444; // 1 = 4:4:4 (H.264 High 4:4:4 / HEVC FRExt), 0 = 4:2:0
} NvencConfig;
// Initialize and open an NVENC encoding session. Returns NULL on error.
NvencEngine* nvenc_create(const NvencConfig* config);
// Register host shared memory (XShm buffer) as CUDA pinned memory that NVENC reads by DMA.
// Returns 0 on success, negative value on error.
int nvenc_register_host_buffer(NvencEngine* engine, void* host_ptr, size_t size);
// Unregister a previously registered host buffer (the CUDA context must be current).
void nvenc_unregister_host_buffer(NvencEngine* engine);
// Encode one frame.
// If host buffer was registered via nvenc_register_host_buffer, input_argb can be NULL
// and the encoder reads the registered host memory directly (no host-to-device copy).
// force_idr: 1 to force keyframe/IDR, 0 otherwise
// out_data: pointer to receive the bitstream buffer (valid until next encode call or destroy)
// out_len: pointer to receive the bitstream size in bytes
// Returns 0 on success, negative value on error.
int nvenc_encode_frame(
NvencEngine* engine,
const uint8_t* input_argb,
uint32_t pitch,
int force_idr,
const uint8_t** out_data,
uint32_t* out_len
);
// Destroy the NVENC engine and free all CUDA/NVENC resources.
void nvenc_destroy(NvencEngine* engine);
#ifdef __cplusplus
}
#endif
#endif // UU_NVENC_ENGINE_H
+39 -3
View File
@@ -17,7 +17,7 @@ static int portal_eis_dispatch(struct uu_portal *p) {
case EI_EVENT_SEAT_ADDED:
ei_seat_bind_capabilities(ei_event_get_seat(event),
EI_DEVICE_CAP_POINTER, EI_DEVICE_CAP_POINTER_ABSOLUTE,
EI_DEVICE_CAP_BUTTON, EI_DEVICE_CAP_SCROLL, EI_DEVICE_CAP_KEYBOARD, NULL);
EI_DEVICE_CAP_BUTTON, EI_DEVICE_CAP_SCROLL, EI_DEVICE_CAP_KEYBOARD, EI_DEVICE_CAP_TOUCH, NULL);
break;
case EI_EVENT_DEVICE_RESUMED:
if (!g_list_find(p->ei_devices, device)) {
@@ -55,15 +55,19 @@ static struct ei_region *portal_eis_region(struct uu_portal *p, struct ei_device
ei_region_get_width(region) && ei_region_get_height(region)) return region;
}
}
static struct ei_device *portal_eis_absolute(struct uu_portal *p, struct ei_region **region) {
static struct ei_device *portal_eis_mapped(struct uu_portal *p, enum ei_device_capability capability, struct ei_region **region) {
for (GList *item = p->ei_devices; item; item = item->next) {
struct ei_device *device = item->data;
if (ei_device_has_capability(device, EI_DEVICE_CAP_POINTER_ABSOLUTE) &&
if (ei_device_has_capability(device, capability) &&
(*region = portal_eis_region(p, device))) return device;
}
return NULL;
}
static struct ei_device *portal_eis_absolute(struct uu_portal *p, struct ei_region **region) {
return portal_eis_mapped(p, EI_DEVICE_CAP_POINTER_ABSOLUTE, region);
}
static void portal_eis_close(struct uu_portal *p) {
if (p->ei_touch) p->ei_touch = ei_touch_unref(p->ei_touch);
for (GList *item = p->ei_devices; item; item = item->next) ei_device_unref(item->data);
g_list_free(p->ei_devices); p->ei_devices = NULL;
if (p->ei) p->ei = ei_unref(p->ei);
@@ -157,6 +161,38 @@ static int portal_eis_button(struct uu_portal *p, int button, int pressed) {
ei_device_button_button(device, code, !!pressed);
return portal_eis_frame(p, device);
}
static int portal_eis_scroll(struct uu_portal *p, double dx, double dy, int finish) {
if (portal_eis_available(p)) return 9;
struct ei_device *device = portal_eis_device(p, EI_DEVICE_CAP_SCROLL);
if (!device) return 9;
if (dx != 0 || dy != 0) ei_device_scroll_delta(device, dx, dy);
if (finish) ei_device_scroll_stop(device, true, true);
return portal_eis_frame(p, device);
}
static int portal_eis_touch(struct uu_portal *p, int phase, double x, double y) {
if (portal_eis_available(p)) return 9;
if (phase == 2) {
if (!p->ei_touch) return 0;
struct ei_device *device = ei_touch_get_device(p->ei_touch);
ei_touch_up(p->ei_touch);
p->ei_touch = ei_touch_unref(p->ei_touch);
return portal_eis_frame(p, device);
}
struct ei_region *region = NULL;
struct ei_device *device = portal_eis_mapped(p, EI_DEVICE_CAP_TOUCH, &region);
if (!device) return 9;
double target_x = ei_region_get_x(region) + x * ei_region_get_width(region) / p->width;
double target_y = ei_region_get_y(region) + y * ei_region_get_height(region) / p->height;
if (phase == 0) {
if (p->ei_touch) { ei_touch_up(p->ei_touch); p->ei_touch = ei_touch_unref(p->ei_touch); }
if (!(p->ei_touch = ei_device_touch_new(device))) return 9;
ei_touch_down(p->ei_touch, target_x, target_y);
} else {
if (!p->ei_touch) return 11;
ei_touch_motion(p->ei_touch, target_x, target_y);
}
return portal_eis_frame(p, device);
}
static int portal_eis_key(struct uu_portal *p, int code, int pressed) {
if (code < 0 || code > 0x2ff) return 11;
if (portal_eis_available(p)) return 9;
+347 -31
View File
@@ -16,6 +16,7 @@
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <limits.h>
#define DEST "org.freedesktop.portal.Desktop"
#define PATH "/org/freedesktop/portal/desktop"
@@ -56,10 +57,12 @@ struct uu_portal {
int format_valid, stream_started;
gint64 interrupted_at, display_changed_at;
uint32_t node, width, height;
int logical_width, logical_height;
int logical_width, logical_height, position_x, position_y, has_position;
int absolute_stream_pixels;
uint32_t devices, available;
struct ei *ei;
GList *ei_devices;
struct ei_touch *ei_touch;
char *mapping_id;
uint32_t ei_sequence;
atomic_int ei_failed;
@@ -69,6 +72,11 @@ struct uu_portal {
size_t frame_length;
uint64_t sequence;
uint64_t revision;
uint32_t buffers_seen, last_buffer_type;
int dma_requested, dma_negotiated, dma_format, dma_bad, dma_blocked, dma_neutral, dma_seen;
uint64_t modifier;
gint64 dma_requested_at;
struct pw_buffer *dma_pending, *dma_current;
};
#include "portal_clipboard.inc"
@@ -81,6 +89,19 @@ static int open_cancelled(struct uu_portal *p) {
}
static int wait_for_first_frame(struct uu_portal *p);
#include "portal_eis.inc"
/* A uint32 RemoteDesktop property (version, AvailableDeviceTypes); 0 when unreadable. */
static guint remote_property(struct uu_portal *p, const char *name) {
GVariant *reply = g_dbus_connection_call_sync(p->bus, DEST, PATH,
"org.freedesktop.DBus.Properties", "Get", g_variant_new("(ss)", REMOTE, name),
G_VARIANT_TYPE("(v)"), G_DBUS_CALL_FLAGS_NONE, 3000, NULL, NULL);
guint result = 0;
if (reply) {
GVariant *value; g_variant_get(reply, "(v)", &value);
if (g_variant_is_of_type(value, G_VARIANT_TYPE_UINT32)) result = g_variant_get_uint32(value);
g_variant_unref(value); g_variant_unref(reply);
}
return result;
}
static void fail(struct uu_portal *p, int error) {
pthread_mutex_lock(&p->lock);
if (!p->error) p->error = error;
@@ -208,11 +229,17 @@ static void stream_state(void *data, enum pw_stream_state old, enum pw_stream_st
pthread_mutex_unlock(&p->lock);
if (state == PW_STREAM_STATE_ERROR || state == PW_STREAM_STATE_UNCONNECTED) fail(data, 9);
}
static void return_dma_buffer(struct uu_portal *p, struct pw_buffer **buffer);
static void stream_format(void *data, uint32_t id, const struct spa_pod *param) {
struct uu_portal *p = data;
if (id != SPA_PARAM_Format) return;
if (!param) {
pthread_mutex_lock(&p->lock);
if (p->dma_format) {
return_dma_buffer(p, &p->dma_pending);
return_dma_buffer(p, &p->dma_current);
p->sequence = 0;
}
p->format_valid = 0;
update_interruption(p);
pthread_mutex_unlock(&p->lock);
@@ -224,6 +251,11 @@ static void stream_format(void *data, uint32_t id, const struct spa_pod *param)
(info.format != SPA_VIDEO_FORMAT_BGRA && info.format != SPA_VIDEO_FORMAT_BGRx &&
info.format != SPA_VIDEO_FORMAT_RGBA && info.format != SPA_VIDEO_FORMAT_RGBx)) { fail(p, 8); return; }
pthread_mutex_lock(&p->lock);
if (p->dma_format) {
return_dma_buffer(p, &p->dma_pending);
return_dma_buffer(p, &p->dma_current);
p->sequence = 0;
}
if (p->width && (p->width != info.size.width || p->height != info.size.height)) {
p->error = 8; pthread_cond_broadcast(&p->changed); pthread_mutex_unlock(&p->lock); return;
}
@@ -231,12 +263,70 @@ static void stream_format(void *data, uint32_t id, const struct spa_pod *param)
if (!p->frame) p->frame = malloc(length);
if (!p->frame) { p->error = 8; pthread_mutex_unlock(&p->lock); return; }
p->width = info.size.width; p->height = info.size.height; p->format = info.format;
p->dma_format = spa_pod_find_prop(param, NULL, SPA_FORMAT_VIDEO_modifier) != NULL;
p->modifier = info.modifier;
p->dma_negotiated = p->dma_requested;
p->buffers_seen = 0;
p->frame_length = length;
p->format_valid = 1;
p->display_changed_at = 0;
update_interruption(p);
pthread_cond_broadcast(&p->changed);
pthread_mutex_unlock(&p->lock);
fprintf(stderr, "Portal capture format: format=%u size=%ux%u dma_buf=%d dma_requested=%d modifier=%llu\n",
info.format, info.size.width, info.size.height, p->dma_format, p->dma_requested, (unsigned long long)info.modifier);
/* PipeWire DMA-BUF sharing: modifier formats require DMA buffers exclusively.
* Keep a current and a pending frame; at least four buffers prevent producer starvation. */
if (p->stream) {
uint8_t storage[256];
struct spa_pod_builder builder = SPA_POD_BUILDER_INIT(storage, sizeof(storage));
const struct spa_pod *buffers = spa_pod_builder_add_object(&builder, SPA_TYPE_OBJECT_ParamBuffers, SPA_PARAM_Buffers,
SPA_PARAM_BUFFERS_buffers, SPA_POD_CHOICE_RANGE_Int(4, 4, 8),
SPA_PARAM_BUFFERS_dataType, SPA_POD_CHOICE_FLAGS_Int(p->dma_format ?
(1 << SPA_DATA_DmaBuf) : ((1 << SPA_DATA_MemPtr) | (1 << SPA_DATA_MemFd))));
pw_stream_update_params(p->stream, &buffers, 1);
}
}
/* All pending/current buffer changes run under the PipeWire loop lock, then p->lock. */
static void return_dma_buffer(struct uu_portal *p, struct pw_buffer **buffer) {
if (*buffer && p->stream) pw_stream_queue_buffer(p->stream, *buffer);
*buffer = NULL;
}
static int describe_dma_buffer(struct uu_portal *p, struct spa_buffer *spa, UuDmaFrame *frame) {
if (p->error || atomic_load(&p->closed)) return 10;
if (p->modifier != 0) return 19;
if (!p->format_valid || !p->width || !p->height || spa->n_datas != 1) return 14;
struct spa_data *d = &spa->datas[0];
struct spa_meta_header *header = spa_buffer_find_meta_data(spa, SPA_META_Header, sizeof(*header));
if (!d->chunk || (d->chunk->flags & SPA_CHUNK_FLAG_CORRUPTED) ||
(header && (header->flags & SPA_META_HEADER_FLAG_CORRUPTED))) return 10;
if (d->chunk->flags & SPA_CHUNK_FLAG_EMPTY) return 15;
struct spa_meta_region *crop = spa_buffer_find_meta_data(spa, SPA_META_VideoCrop, sizeof(*crop));
if (crop && spa_meta_region_is_valid(crop) && (crop->region.position.x || crop->region.position.y ||
crop->region.size.width != p->width || crop->region.size.height != p->height)) return 14;
/* Explicit sync is not advertised; require implicit DMA-BUF fences understood by VAAPI. */
#if PW_CHECK_VERSION(1, 2, 0)
if (spa_buffer_find_meta(spa, SPA_META_SyncTimeline)) return 18;
#endif
if (d->type != SPA_DATA_DmaBuf || d->fd < 0 || d->fd > INT_MAX || d->chunk->stride < (int64_t)p->width * 4)
return 14;
uint64_t offset = (uint64_t)d->mapoffset + d->chunk->offset;
uint64_t size = (uint64_t)d->mapoffset + d->maxsize;
uint64_t required = offset + (uint64_t)(p->height - 1) * d->chunk->stride + (uint64_t)p->width * 4;
if (required > size || size > UINT32_MAX) return 14;
if (required - offset > d->chunk->size) return 10;
uint32_t fourcc;
switch (p->format) {
case SPA_VIDEO_FORMAT_BGRx: fourcc=0x34325258; break;
case SPA_VIDEO_FORMAT_BGRA: fourcc=0x34325241; break;
case SPA_VIDEO_FORMAT_RGBx: fourcc=0x34324258; break;
case SPA_VIDEO_FORMAT_RGBA: fourcc=0x34324241; break;
default: return 14;
}
*frame = (UuDmaFrame){ .fd=d->fd, .fourcc=fourcc, .width=p->width, .height=p->height,
.stride=d->chunk->stride, .offset=offset, .size=size, .modifier=p->modifier };
return 0;
}
/* Called with the frame mutex held. Invalid transient chunks are discarded;
* allocation capacity is not evidence that valid pixels have been supplied. */
@@ -286,14 +376,131 @@ static void stream_process(void *data) {
}
if (!newest) return;
pthread_mutex_lock(&p->lock);
copy_video_buffer(p, newest->buffer);
p->buffers_seen++;
p->last_buffer_type = newest->buffer->n_datas ? newest->buffer->datas[0].type : 0;
if (p->dma_format) {
UuDmaFrame frame;
int result = describe_dma_buffer(p, newest->buffer, &frame);
if (result == 0 && p->dma_requested && !p->dma_blocked) {
return_dma_buffer(p, &p->dma_pending);
p->dma_pending = newest;
newest = NULL;
p->dma_seen = 1;
p->sequence++; p->revision++; p->dma_neutral = 0;
} else if (result == 15) {
return_dma_buffer(p, &p->dma_pending);
return_dma_buffer(p, &p->dma_current);
p->dma_neutral = 1; p->sequence++; p->revision++;
} else if (result != 10) p->dma_bad = result;
} else copy_video_buffer(p, newest->buffer);
pthread_cond_broadcast(&p->changed);
pthread_mutex_unlock(&p->lock);
pw_stream_queue_buffer(p->stream, newest);
if (newest) pw_stream_queue_buffer(p->stream, newest);
}
static void stream_remove_buffer(void *data, struct pw_buffer *buffer) {
struct uu_portal *p = data;
pthread_mutex_lock(&p->lock);
if (p->dma_pending == buffer) p->dma_pending = NULL;
if (p->dma_current == buffer) p->dma_current = NULL;
pthread_mutex_unlock(&p->lock);
}
static const struct pw_stream_events stream_events = {
PW_VERSION_STREAM_EVENTS, .state_changed = stream_state, .param_changed = stream_format, .process = stream_process
PW_VERSION_STREAM_EVENTS, .state_changed = stream_state, .param_changed = stream_format, .process = stream_process,
.remove_buffer = stream_remove_buffer
};
static unsigned capture_formats(struct uu_portal *p, struct spa_pod_builder *b, const struct spa_pod **params, int dma) {
unsigned count = 0;
/* Only advertise linear RGB: arbitrary tiling/compression cannot be inferred from an FD.
* PipeWire page_dma_buf: put the modifier format before the shared-memory fallback. */
for (int with_modifier = dma; with_modifier >= 0; with_modifier--) {
struct spa_pod_frame frame;
spa_pod_builder_push_object(b, &frame, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat);
spa_pod_builder_add(b,
SPA_FORMAT_mediaType, SPA_POD_Id(SPA_MEDIA_TYPE_video),
SPA_FORMAT_mediaSubtype, SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw),
SPA_FORMAT_VIDEO_format, SPA_POD_CHOICE_ENUM_Id(4, SPA_VIDEO_FORMAT_BGRA, SPA_VIDEO_FORMAT_BGRx, SPA_VIDEO_FORMAT_RGBA, SPA_VIDEO_FORMAT_RGBx),
0);
if (p->width && p->height) spa_pod_builder_add(b,
SPA_FORMAT_VIDEO_size, SPA_POD_Rectangle(&SPA_RECTANGLE(p->width,p->height)), 0);
else spa_pod_builder_add(b, SPA_FORMAT_VIDEO_size,
SPA_POD_CHOICE_RANGE_Rectangle(&SPA_RECTANGLE(1920,1080), &SPA_RECTANGLE(1,1), &SPA_RECTANGLE(8192,8192)), 0);
spa_pod_builder_add(b,
SPA_FORMAT_VIDEO_framerate, SPA_POD_CHOICE_RANGE_Fraction(&SPA_FRACTION(60,1), &SPA_FRACTION(0,1), &SPA_FRACTION(60,1)), 0);
if (with_modifier) {
spa_pod_builder_prop(b, SPA_FORMAT_VIDEO_modifier, SPA_POD_PROP_FLAG_MANDATORY);
spa_pod_builder_long(b, 0); /* DRM_FORMAT_MOD_LINEAR */
}
params[count++] = spa_pod_builder_pop(b, &frame);
}
params[count++] = spa_pod_builder_add_object(b, SPA_TYPE_OBJECT_ParamBuffers, SPA_PARAM_Buffers,
SPA_PARAM_BUFFERS_buffers, SPA_POD_CHOICE_RANGE_Int(4, 4, 8),
SPA_PARAM_BUFFERS_dataType, SPA_POD_CHOICE_FLAGS_Int((1 << SPA_DATA_MemPtr) | (1 << SPA_DATA_MemFd) |
(dma ? (1 << SPA_DATA_DmaBuf) : 0)));
return count;
}
static int request_capture_formats(struct uu_portal *p, int dma) {
uint8_t storage[2048];
struct spa_pod_builder b = SPA_POD_BUILDER_INIT(storage, sizeof(storage));
const struct spa_pod *params[3];
unsigned count = capture_formats(p, &b, params, dma);
return pw_stream_update_params(p->stream, params, count);
}
int uu_portal_dmabuf_acquire(struct uu_portal *p, UuDmaFrame *frame, uint64_t *revision) {
if (!p || !p->pw_loop || !p->stream || !frame || !revision) return 14;
pw_thread_loop_lock(p->pw_loop);
pthread_mutex_lock(&p->lock);
int result = 10;
if (atomic_load(&p->closed) || p->error || p->dma_blocked) result = 14;
else if (p->dma_bad) result = p->dma_bad;
else if (!p->dma_requested) {
p->dma_requested = 1; p->dma_negotiated = 0; p->dma_seen = 0;
p->dma_requested_at = g_get_monotonic_time();
pthread_mutex_unlock(&p->lock);
int status = request_capture_formats(p, 1);
pw_thread_loop_unlock(p->pw_loop);
return status < 0 ? 14 : 10;
} else if (p->dma_negotiated && !p->dma_format) result = 16;
else if (!p->dma_seen && !p->dma_neutral &&
g_get_monotonic_time() - p->dma_requested_at > 2 * G_TIME_SPAN_SECOND) result = 17;
else if (p->dma_neutral) result = 15;
else if (p->dma_format && p->format_valid) {
if (p->dma_pending) {
return_dma_buffer(p, &p->dma_current);
p->dma_current = p->dma_pending; p->dma_pending = NULL;
}
if (p->dma_current) {
result = describe_dma_buffer(p, p->dma_current->buffer, frame);
if (!result) {
result = *revision == p->revision ? 12 : 0;
*revision = p->revision;
}
}
}
pthread_mutex_unlock(&p->lock);
/* A lease pins both the pw_buffer and its format across VAAPI's completion fence.
* No producer buffer may be returned, removed or renegotiated while the GPU reads it. */
if (result != 0 && result != 12) pw_thread_loop_unlock(p->pw_loop);
return result;
}
void uu_portal_dmabuf_release(struct uu_portal *p) {
pw_thread_loop_unlock(p->pw_loop);
}
void uu_portal_dmabuf_disable(struct uu_portal *p) {
if (!p || !p->pw_loop || !p->stream) return;
pw_thread_loop_lock(p->pw_loop);
pthread_mutex_lock(&p->lock);
int requested = p->dma_requested;
if (requested) {
p->dma_requested = 0; p->dma_blocked = 1; p->dma_neutral = 0;
return_dma_buffer(p, &p->dma_pending); return_dma_buffer(p, &p->dma_current);
if (p->dma_format) { p->sequence = 0; p->revision++; }
}
pthread_mutex_unlock(&p->lock);
if (requested) request_capture_formats(p, 0);
pw_thread_loop_unlock(p->pw_loop);
}
static int connect_pipewire(struct uu_portal *p) {
if (open_cancelled(p)) return 13;
GUnixFDList *fds = NULL;
@@ -322,27 +529,33 @@ static int connect_pipewire(struct uu_portal *p) {
PW_KEY_MEDIA_TYPE, "Video", PW_KEY_MEDIA_CATEGORY, "Capture", PW_KEY_MEDIA_ROLE, "Screen", NULL));
if (!p->stream) return 7;
pw_stream_add_listener(p->stream, &p->stream_listener, &stream_events, p);
uint8_t storage[1024]; struct spa_pod_builder builder = SPA_POD_BUILDER_INIT(storage, sizeof(storage));
const struct spa_pod *params[2];
params[0] = spa_pod_builder_add_object(&builder, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat,
SPA_FORMAT_mediaType, SPA_POD_Id(SPA_MEDIA_TYPE_video), SPA_FORMAT_mediaSubtype, SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw),
SPA_FORMAT_VIDEO_format, SPA_POD_CHOICE_ENUM_Id(4, SPA_VIDEO_FORMAT_BGRA, SPA_VIDEO_FORMAT_BGRx, SPA_VIDEO_FORMAT_RGBA, SPA_VIDEO_FORMAT_RGBx),
SPA_FORMAT_VIDEO_size, SPA_POD_CHOICE_RANGE_Rectangle(&SPA_RECTANGLE(1920,1080), &SPA_RECTANGLE(1,1), &SPA_RECTANGLE(8192,8192)),
SPA_FORMAT_VIDEO_framerate, SPA_POD_CHOICE_RANGE_Fraction(&SPA_FRACTION(60,1), &SPA_FRACTION(0,1), &SPA_FRACTION(60,1)));
params[1] = spa_pod_builder_add_object(&builder, SPA_TYPE_OBJECT_ParamBuffers, SPA_PARAM_Buffers,
SPA_PARAM_BUFFERS_dataType, SPA_POD_CHOICE_FLAGS_Int((1 << SPA_DATA_MemPtr) | (1 << SPA_DATA_MemFd)));
uint8_t storage[2048]; struct spa_pod_builder builder = SPA_POD_BUILDER_INIT(storage, sizeof(storage));
const struct spa_pod *params[3];
unsigned param_count = capture_formats(p, &builder, params, p->dma_requested);
p->dma_requested_at = g_get_monotonic_time();
/* Node ID belongs to this portal's restricted remote. Do not put it into
* target.object, whose numeric value means object.serial on modern PW. */
if (pw_stream_connect(p->stream, PW_DIRECTION_INPUT, p->node,
PW_STREAM_FLAG_AUTOCONNECT | PW_STREAM_FLAG_MAP_BUFFERS, params, 2) < 0) return 7;
PW_STREAM_FLAG_AUTOCONNECT | PW_STREAM_FLAG_MAP_BUFFERS, params, param_count) < 0) return 7;
if (pw_thread_loop_start(p->pw_loop) < 0) return 7;
return wait_for_first_frame(p);
int result = wait_for_first_frame(p);
pthread_mutex_lock(&p->lock);
int fallback = (result == 10 || result == 14) && p->dma_requested && !p->error &&
!atomic_load(&p->closed) && !open_cancelled(p);
int dma_status = p->dma_bad;
pthread_mutex_unlock(&p->lock);
if (fallback) {
fprintf(stderr, "Portal initial DMA-BUF unavailable: status=%d; falling back to shared-memory capture\n", dma_status);
uu_portal_dmabuf_disable(p);
result = wait_for_first_frame(p);
}
return result;
}
static int wait_for_first_frame(struct uu_portal *p) {
struct timespec until;
gint64 deadline = g_get_monotonic_time() + 10 * G_TIME_SPAN_SECOND;
pthread_mutex_lock(&p->lock);
while (!p->sequence && !p->error && !open_cancelled(p)) {
while (!p->sequence && !p->error && !open_cancelled(p) && !(p->dma_requested && p->dma_bad)) {
gint64 remaining = deadline - g_get_monotonic_time();
if (remaining <= 0) break;
clock_gettime(CLOCK_REALTIME, &until);
@@ -351,7 +564,10 @@ static int wait_for_first_frame(struct uu_portal *p) {
if (until.tv_nsec >= 1000000000) { until.tv_sec++; until.tv_nsec -= 1000000000; }
pthread_cond_timedwait(&p->changed, &p->lock, &until);
}
int result = p->error ? p->error : open_cancelled(p) ? 13 : p->sequence ? 0 : 10;
int result = p->error ? p->error : open_cancelled(p) ? 13 : p->sequence ? 0 :
p->dma_requested && p->dma_bad ? 14 : 10;
if (result == 10) fprintf(stderr, "Portal first-frame timeout: format_valid=%d dma_buf=%d dma_requested=%d buffers=%u last_type=%u dma_status=%d\n",
p->format_valid, p->dma_format, p->dma_requested, p->buffers_seen, p->last_buffer_type, p->dma_bad);
pthread_mutex_unlock(&p->lock);
return result;
}
@@ -365,10 +581,12 @@ static int read_stream_result(struct uu_portal *p, GVariant *results) {
if (!has_devices || (devices & 3) != 3 || !streams || g_variant_n_children(streams) != 1) {
error = 6;
} else {
p->devices = devices;
GVariant *entry = g_variant_get_child_value(streams, 0), *properties;
g_variant_get(entry, "(u@a{sv})", &p->node, &properties);
/* Optional 'size' is compositor logical coordinates, not frame pixels. */
g_variant_lookup(properties, "size", "(ii)", &p->logical_width, &p->logical_height);
p->has_position = g_variant_lookup(properties, "position", "(ii)", &p->position_x, &p->position_y);
const char *mapping_id = NULL;
if (g_variant_lookup(properties, "mapping_id", "&s", &mapping_id)) p->mapping_id = g_strdup(mapping_id);
g_variant_unref(properties); g_variant_unref(entry);
@@ -378,12 +596,13 @@ static int read_stream_result(struct uu_portal *p, GVariant *results) {
}
static struct uu_portal *open_persist(const char *restore, void (*save_token)(const char *, void *),
void *save_data, uu_portal_cancelled_fn cancelled, void *cancel_data,
int *error, uint32_t *width, uint32_t *height) {
int prefer_dmabuf, int *error, uint32_t *width, uint32_t *height, uint32_t source_types) {
*error = 0; *width = *height = 0;
struct uu_portal *p = calloc(1, sizeof(*p));
if (!p) { *error = 8; return NULL; }
p->cancelled = cancelled;
p->cancel_data = cancel_data;
p->dma_requested = !!prefer_dmabuf;
/* GNOME forwards NotifyPointerMotionAbsolute into Mutter's stream-to-stage
* transform. It expects stream pixels, unlike the compositor-sized KDE path.
* Do not apply the compositor scale twice on fractional-scale displays. */
@@ -412,16 +631,10 @@ static struct uu_portal *open_persist(const char *restore, void (*save_token)(co
p->closed_subscription = g_dbus_connection_signal_subscribe(p->bus, DEST, SESSION, "Closed", p->session,
NULL, G_DBUS_SIGNAL_FLAGS_NONE, session_closed, p, NULL);
g_variant_builder_init(&options, G_VARIANT_TYPE_VARDICT);
g_variant_builder_add(&options, "{sv}", "types", g_variant_new_uint32(3));
GVariant *version_reply = g_dbus_connection_call_sync(p->bus, DEST, PATH,
"org.freedesktop.DBus.Properties", "Get", g_variant_new("(ss)", REMOTE, "version"),
G_VARIANT_TYPE("(v)"), G_DBUS_CALL_FLAGS_NONE, 3000, NULL, NULL);
guint version = 0;
if (version_reply) {
GVariant *value; g_variant_get(version_reply, "(v)", &value);
if (g_variant_is_of_type(value, G_VARIANT_TYPE_UINT32)) version = g_variant_get_uint32(value);
g_variant_unref(value); g_variant_unref(version_reply);
}
/* Keyboard and pointer, plus the touchscreen (4) where the portal offers one (mobile viewers). */
p->available = remote_property(p, "AvailableDeviceTypes");
g_variant_builder_add(&options, "{sv}", "types", g_variant_new_uint32(3 | (p->available & 4)));
guint version = remote_property(p, "version");
if (version >= 2) {
g_variant_builder_add(&options, "{sv}", "persist_mode", g_variant_new_uint32(2));
if (restore && *restore) g_variant_builder_add(&options, "{sv}", "restore_token", g_variant_new_string(restore));
@@ -431,7 +644,8 @@ static struct uu_portal *open_persist(const char *restore, void (*save_token)(co
if (!results) goto done;
g_variant_unref(results);
g_variant_builder_init(&options, G_VARIANT_TYPE_VARDICT);
g_variant_builder_add(&options, "{sv}", "types", g_variant_new_uint32(1));
/* 1 monitor; 4 virtual (KDE creates a KWin virtual output for the stream). */
g_variant_builder_add(&options, "{sv}", "types", g_variant_new_uint32(source_types));
g_variant_builder_add(&options, "{sv}", "multiple", g_variant_new_boolean(FALSE));
/* Hidden cursor avoids duplicate pointer; supported since ScreenCast v1. */
results = request(p, SCREEN, "SelectSources", &options, 1, error);
@@ -494,11 +708,21 @@ struct uu_portal *uu_portal_open_persist_cancellable(const char *restore,
void (*save_token)(const char *, void *), void *save_data,
uu_portal_cancelled_fn cancelled, void *cancel_data,
int *error, uint32_t *width, uint32_t *height) {
return open_persist(restore, save_token, save_data, cancelled, cancel_data, error, width, height);
return open_persist(restore, save_token, save_data, cancelled, cancel_data, 0, error, width, height, 1);
}
struct uu_portal *uu_portal_open_persist_capture(const char *restore,
void (*save_token)(const char *, void *), void *save_data,
uu_portal_cancelled_fn cancelled, void *cancel_data, int prefer_dmabuf,
int *error, uint32_t *width, uint32_t *height) {
return open_persist(restore, save_token, save_data, cancelled, cancel_data, prefer_dmabuf, error, width, height, 1);
}
struct uu_portal *uu_portal_open_persist(const char *restore, void (*save_token)(const char *, void *),
void *data, int *error, uint32_t *width, uint32_t *height) {
return open_persist(restore, save_token, data, NULL, NULL, error, width, height);
return open_persist(restore, save_token, data, NULL, NULL, 0, error, width, height, 1);
}
struct uu_portal *uu_portal_open_virtual(const char *restore, void (*save_token)(const char *, void *),
void *data, int *error, uint32_t *width, uint32_t *height) {
return open_persist(restore, save_token, data, NULL, NULL, 0, error, width, height, 4);
}
struct uu_portal *uu_portal_open_restore(const char *restore, int *error, uint32_t *width, uint32_t *height) {
return uu_portal_open_persist(restore, NULL, NULL, error, width, height);
@@ -545,11 +769,15 @@ void uu_portal_close(struct uu_portal *p) {
}
void uu_portal_reset_frame(struct uu_portal *p) {
if (!p) return;
if (p->pw_loop) pw_thread_loop_lock(p->pw_loop);
pthread_mutex_lock(&p->lock);
return_dma_buffer(p, &p->dma_pending); return_dma_buffer(p, &p->dma_current);
p->dma_neutral = 0;
p->sequence = 0;
p->revision++;
if (p->frame) memset(p->frame, 0, p->frame_length);
pthread_mutex_unlock(&p->lock);
if (p->pw_loop) pw_thread_loop_unlock(p->pw_loop);
}
int uu_portal_capture(struct uu_portal *p, uint8_t *frame, size_t length) {
return uu_portal_capture_since(p, frame, length, NULL);
@@ -566,6 +794,7 @@ static int stream_stalled(struct uu_portal *p) {
}
int uu_portal_capture_since(struct uu_portal *p, uint8_t *frame, size_t length, uint64_t *revision) {
if (!p || !frame) return 11;
uu_portal_dmabuf_disable(p);
pthread_mutex_lock(&p->lock);
int result = atomic_load(&p->closed) ? 9 : p->error ? p->error : stream_stalled(p) ? 9 :
!p->sequence ? 10 : length != p->frame_length ? 11 : 0;
@@ -669,9 +898,96 @@ int uu_portal_button(struct uu_portal *p, int button, int pressed) {
if (!code) return 11;
return notify(p, "NotifyPointerButton", g_variant_new("(o@a{sv}iu)", p->session, empty_options(), code, (guint)!!pressed));
}
/* Smooth scroll in stream pixels (positive scrolls down/right, like a touchpad); `finish` ends the
* gesture so clients may coast. */
int uu_portal_scroll(struct uu_portal *p, double dx, double dy, int finish) {
if (!p || !isfinite(dx) || !isfinite(dy)) return 11;
if (p->logical_width <= 0 || p->logical_height <= 0 || !p->width || !p->height) return 11;
int result = prepare_input(p); if (result) return result;
double lx = dx * p->logical_width / p->width, ly = dy * p->logical_height / p->height;
if (p->ei) return portal_eis_scroll(p, lx, ly, finish);
GVariantBuilder options; g_variant_builder_init(&options, G_VARIANT_TYPE_VARDICT);
if (finish) g_variant_builder_add(&options, "{sv}", "finish", g_variant_new_boolean(TRUE));
return notify(p, "NotifyPointerAxis", g_variant_new("(oa{sv}dd)", p->session, &options, lx, ly));
}
/* One finger (slot 0) in stream pixels: phase 0 down, 1 motion, 2 up. */
int uu_portal_touch_supported(struct uu_portal *p) { return p && (p->devices & 4); }
/* The portal offers a touchscreen this session's consent did not grant (restored from before touch). */
int uu_portal_touch_available(struct uu_portal *p) { return p && (p->available & 4); }
int uu_portal_touch(struct uu_portal *p, int phase, double x, double y) {
if (!uu_portal_touch_supported(p) || phase < 0 || phase > 2) return 11;
if (phase != 2 && (!isfinite(x) || !isfinite(y) || p->logical_width <= 0 || p->logical_height <= 0 ||
!p->width || !p->height || x < 0 || y < 0 || x >= p->width || y >= p->height)) return 11;
int result = prepare_input(p); if (result) return result;
if (p->ei) return portal_eis_touch(p, phase, x, y);
if (phase == 2) return notify(p, "NotifyTouchUp", g_variant_new("(o@a{sv}u)", p->session, empty_options(), 0u));
return notify(p, phase ? "NotifyTouchMotion" : "NotifyTouchDown", g_variant_new("(o@a{sv}uudd)", p->session, empty_options(), p->node, 0u,
p->absolute_stream_pixels ? x : x * p->logical_width / p->width,
p->absolute_stream_pixels ? y : y * p->logical_height / p->height));
}
int uu_portal_key(struct uu_portal *p, uint32_t symbol, int keycode, int pressed) {
if (!p || !symbol || symbol > INT32_MAX) return 11;
int result = prepare_input(p); if (result) return result;
if (p->ei) return portal_eis_key(p, keycode, pressed);
return notify(p, "NotifyKeyboardKeysym", g_variant_new("(o@a{sv}iu)", p->session, empty_options(), (gint)symbol, (guint)!!pressed));
}
/* Logical position of the granted monitor: matches a Mutter logical monitor. */
int uu_portal_stream_position(struct uu_portal *p, int32_t *x, int32_t *y) {
if (!p || !p->has_position) return 11;
*x = p->position_x; *y = p->position_y;
return 0;
}
/* Mutter's monitors as "connector\twidth\theight\tx\ty\tprimary\n" lines: current mode in
* pixels, logical position. Returns the count, or -1 without Mutter (KDE, no session bus). */
int uu_portal_monitors(char *out, size_t length) {
if (!out || !length) return -1;
out[0] = 0;
GDBusConnection *bus = g_bus_get_sync(G_BUS_TYPE_SESSION, NULL, NULL);
if (!bus) return -1;
GVariant *reply = g_dbus_connection_call_sync(bus, MUTTER_DISPLAY, MUTTER_DISPLAY_PATH, MUTTER_DISPLAY,
"GetCurrentState", NULL, G_VARIANT_TYPE("(ua((ssss)a(siiddada{sv})a{sv})a(iiduba(ssss)a{sv})a{sv})"),
G_DBUS_CALL_FLAGS_NONE, 3000, NULL, NULL);
g_object_unref(bus);
if (!reply) return -1;
GVariant *monitors = g_variant_get_child_value(reply, 1), *logical = g_variant_get_child_value(reply, 2);
int count = 0; size_t used = 0;
for (gsize i = 0; i < g_variant_n_children(logical); i++) {
gint32 x, y; gdouble scale; guint32 transform; gboolean primary; GVariant *specs, *props;
g_variant_get_child(logical, i, "(iidub@a(ssss)@a{sv})", &x, &y, &scale, &transform, &primary, &specs, &props);
const gchar *connector = NULL;
if (g_variant_n_children(specs)) g_variant_get_child(specs, 0, "(&s&s&s&s)", &connector, NULL, NULL, NULL);
gint32 width = 0, height = 0;
for (gsize m = 0; connector && m < g_variant_n_children(monitors); m++) {
GVariant *monitor = g_variant_get_child_value(monitors, m), *spec = g_variant_get_child_value(monitor, 0),
*modes = g_variant_get_child_value(monitor, 1);
const gchar *name = NULL; g_variant_get_child(spec, 0, "&s", &name);
for (gsize k = 0; name && !strcmp(name, connector) && k < g_variant_n_children(modes); k++) {
GVariant *mode = g_variant_get_child_value(modes, k), *mode_props = g_variant_get_child_value(mode, 6);
gboolean current = FALSE;
if (g_variant_lookup(mode_props, "is-current", "b", &current) && current)
g_variant_get_child(mode, 1, "i", &width), g_variant_get_child(mode, 2, "i", &height);
g_variant_unref(mode_props); g_variant_unref(mode);
}
g_variant_unref(modes); g_variant_unref(spec); g_variant_unref(monitor);
}
if (transform % 2) { gint32 t = width; width = height; height = t; } /* 90/270, flipped or not */
if (connector && width > 0 && height > 0) {
int n = snprintf(out + used, length - used, "%s\t%d\t%d\t%d\t%d\t%d\n", connector, width, height, x, y, primary ? 1 : 0);
if (n > 0 && (size_t)n < length - used) { used += (size_t)n; count++; }
}
g_variant_unref(specs); g_variant_unref(props);
}
g_variant_unref(monitors); g_variant_unref(logical); g_variant_unref(reply);
return count;
}
/* End the compositor session now (screen-share indicator off) while the handle stays valid;
* captures then report a closed stream until the handle is replaced. */
void uu_portal_end(struct uu_portal *p) {
if (!p || atomic_exchange(&p->closed, 1)) return;
if (p->bus && p->session) {
GVariant *reply = g_dbus_connection_call_sync(p->bus, DEST, p->session, SESSION, "Close",
NULL, NULL, G_DBUS_CALL_FLAGS_NONE, 3000, NULL, NULL);
if (reply) g_variant_unref(reply);
}
}
+17
View File
@@ -2,14 +2,18 @@
#define UU_PORTAL_ENGINE_H
#include <stddef.h>
#include <stdint.h>
#include "dmabuf_frame.h"
struct uu_portal;
typedef int (*uu_portal_cancelled_fn)(void *data);
/* One object owns one consent/session and one PipeWire stream. */
struct uu_portal *uu_portal_open(int *error, uint32_t *width, uint32_t *height);
/* Saves the rotated token immediately after Start, before video initialization. */
struct uu_portal *uu_portal_open_virtual(const char *restore, void (*save_token)(const char *, void *), void *data, int *error, uint32_t *width, uint32_t *height);
struct uu_portal *uu_portal_open_persist(const char *restore, void (*save_token)(const char *, void *), void *data, int *error, uint32_t *width, uint32_t *height);
/* The cancellation callback and data are used only until this call returns. */
struct uu_portal *uu_portal_open_persist_cancellable(const char *restore, void (*save_token)(const char *, void *), void *save_data, uu_portal_cancelled_fn cancelled, void *cancel_data, int *error, uint32_t *width, uint32_t *height);
/* Select the capture transport before connecting, including on same-process recovery. */
struct uu_portal *uu_portal_open_persist_capture(const char *restore, void (*save_token)(const char *, void *), void *save_data, uu_portal_cancelled_fn cancelled, void *cancel_data, int prefer_dmabuf, int *error, uint32_t *width, uint32_t *height);
struct uu_portal *uu_portal_open_restore(const char *restore, int *error, uint32_t *width, uint32_t *height);
const char *uu_portal_restore_token(struct uu_portal *portal);
void uu_portal_close(struct uu_portal *portal);
@@ -23,7 +27,20 @@ void uu_portal_logical_size(struct uu_portal *portal, uint32_t *width, uint32_t
void uu_portal_reset_frame(struct uu_portal *portal);
int uu_portal_capture(struct uu_portal *portal, uint8_t *bgra, size_t length);
int uu_portal_capture_since(struct uu_portal *portal, uint8_t *bgra, size_t length, uint64_t *revision);
/* acquire holds the PipeWire loop until release, including GPU completion.
* 0/12 = leased new/unchanged frame, 10 = pending, 15 = neutral black.
* CPU fallback: 14 layout/disabled, 16 shared memory, 17 timeout, 18 explicit sync, 19 modifier. */
int uu_portal_dmabuf_acquire(struct uu_portal *portal, UuDmaFrame *frame, uint64_t *revision);
void uu_portal_dmabuf_release(struct uu_portal *portal);
void uu_portal_dmabuf_disable(struct uu_portal *portal);
int uu_portal_move(struct uu_portal *portal, double x, double y, int relative);
int uu_portal_button(struct uu_portal *portal, int button, int pressed);
int uu_portal_scroll(struct uu_portal *portal, double dx, double dy, int finish);
int uu_portal_touch_supported(struct uu_portal *portal);
int uu_portal_touch_available(struct uu_portal *portal);
int uu_portal_touch(struct uu_portal *portal, int phase, double x, double y);
int uu_portal_key(struct uu_portal *portal, uint32_t keysym, int keycode, int pressed);
int uu_portal_stream_position(struct uu_portal *portal, int32_t *x, int32_t *y);
int uu_portal_monitors(char *out, size_t length);
void uu_portal_end(struct uu_portal *portal);
#endif
+85
View File
@@ -0,0 +1,85 @@
// Privacy screen, wallpaper mode: a fullscreen keep-above window on each physical monitor showing
// a picture and a notice, while the remote session works on a KWin virtual output. Runs in its own
// process (`uuremote-server privacy-wallpaper`), which the host kills on restore.
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
#include "i18n.h"
typedef struct { int x, y, w, h; } Rect;
static GdkPixbuf *picture;
static gboolean host_closed(GIOChannel *channel, GIOCondition condition, gpointer data) {
(void)channel; (void)condition; (void)data;
gtk_main_quit();
return G_SOURCE_REMOVE;
}
static gboolean draw(GtkWidget *widget, cairo_t *cr, gpointer data) {
(void)data;
int w = gtk_widget_get_allocated_width(widget), h = gtk_widget_get_allocated_height(widget);
cairo_set_source_rgb(cr, 0, 0, 0); cairo_paint(cr);
if (picture) {
// Cover: scale to fill, crop the overflow, keep the aspect ratio.
double pw = gdk_pixbuf_get_width(picture), ph = gdk_pixbuf_get_height(picture);
double s = w / pw > h / ph ? w / pw : h / ph;
cairo_save(cr);
cairo_translate(cr, (w - pw * s) / 2, (h - ph * s) / 2);
cairo_scale(cr, s, s);
gdk_cairo_set_source_pixbuf(cr, picture, 0, 0);
cairo_paint(cr);
cairo_restore(cr);
}
PangoLayout *layout = gtk_widget_create_pango_layout(widget, L("此设备正在被远程控制", "This device is being remotely controlled"));
PangoFontDescription *font = pango_font_description_from_string("Sans 20");
pango_layout_set_font_description(layout, font);
int tw, th; pango_layout_get_pixel_size(layout, &tw, &th);
cairo_set_source_rgba(cr, 0, 0, 0, 0.45);
cairo_rectangle(cr, (w - tw) / 2.0 - 24, h - th - 96, tw + 48, th + 32); cairo_fill(cr);
cairo_set_source_rgb(cr, 1, 1, 1);
cairo_move_to(cr, (w - tw) / 2.0, h - th - 80);
pango_cairo_show_layout(cr, layout);
pango_font_description_free(font); g_object_unref(layout);
return TRUE;
}
/* `rects` are the physical outputs in logical coordinates; monitors elsewhere (the virtual output)
* stay uncovered. Returns when every window is closed or the process is killed. */
int uu_privacy_wallpaper_run(const char *image, const int *rects, int count) {
if (!gtk_init_check(NULL, NULL)) return 1;
if (image && *image) picture = gdk_pixbuf_new_from_file(image, NULL);
GdkDisplay *display = gdk_display_get_default();
int shown = 0;
for (int i = 0; i < gdk_display_get_n_monitors(display); i++) {
GdkMonitor *monitor = gdk_display_get_monitor(display, i);
GdkRectangle g; gdk_monitor_get_geometry(monitor, &g);
int physical = 0;
for (int r = 0; r < count; r++) {
const int *c = rects + r * 4;
if (c[0] == g.x && c[1] == g.y && c[2] == g.width && c[3] == g.height) physical = 1;
}
if (!physical) continue;
GtkWidget *window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_window_set_title(GTK_WINDOW(window), "uu-remote-linux privacy");
gtk_window_set_decorated(GTK_WINDOW(window), FALSE);
gtk_window_set_keep_above(GTK_WINDOW(window), TRUE);
gtk_window_set_skip_taskbar_hint(GTK_WINDOW(window), TRUE);
gtk_window_set_skip_pager_hint(GTK_WINDOW(window), TRUE);
gtk_window_set_default_size(GTK_WINDOW(window), g.width, g.height);
g_signal_connect(window, "draw", G_CALLBACK(draw), NULL);
g_signal_connect(window, "destroy", G_CALLBACK(gtk_main_quit), NULL);
gtk_window_fullscreen_on_monitor(GTK_WINDOW(window), gtk_widget_get_screen(window), i);
gtk_widget_show_all(window);
shown++;
}
if (!shown) return 2;
/* EOF follows the host process, including crashes, rather than its spawning worker thread. */
GIOChannel *host = g_io_channel_unix_new(0);
guint watch = g_io_add_watch(host, G_IO_HUP | G_IO_ERR | G_IO_NVAL, host_closed, NULL);
/* Readiness handshake: the host treats picture mode as on only after this line. */
fputs("ready\n", stdout); fflush(stdout);
gtk_main();
if (g_main_context_find_source_by_id(NULL, watch)) g_source_remove(watch);
g_io_channel_unref(host);
return 0;
}
+141
View File
@@ -0,0 +1,141 @@
// One palette for all GTK windows. Named GTK colors also follow live system theme changes.
#include "ui_theme.h"
#include "i18n.h"
#include <glib/gstdio.h>
#include <string.h>
static int initialized, mode;
static const char *modes[] = {"system", "light", "dark"};
static const char *CSS =
"* { font-family: 'Noto Sans CJK SC', 'Noto Sans SC', sans-serif; }\n"
"@define-color uu_bg mix(@theme_bg_color, @theme_base_color, 0.5);\n"
"@define-color uu_surface @theme_base_color;\n"
"@define-color uu_fg @theme_fg_color;\n"
"@define-color uu_muted mix(@theme_fg_color, @theme_bg_color, 0.25);\n"
"@define-color uu_border mix(@theme_bg_color, @theme_fg_color, 0.18);\n"
"@define-color uu_accent @theme_selected_bg_color;\n"
"@define-color uu_accent_fg @theme_selected_fg_color;\n"
"@define-color uu_tint mix(@theme_base_color, @theme_selected_bg_color, 0.12);\n"
"@define-color uu_success mix(@theme_fg_color, #16a34a, 0.55);\n"
"@define-color uu_error mix(@theme_fg_color, #dc2626, 0.65);\n"
"window { background-color: @uu_bg; color: @uu_fg; }\n"
"headerbar { background-image: none; background-color: @uu_bg; box-shadow: none; border-bottom: 1px solid @uu_border; }\n"
"button { background-image: none; background-color: @uu_surface; color: @uu_fg; border: 1px solid @uu_border; border-radius: 8px; box-shadow: none; text-shadow: none; padding: 7px 12px; }\n"
"button:hover { background-color: @uu_tint; border-color: @uu_accent; }\n"
"button:active, button:checked { background-color: @uu_tint; border-color: @uu_accent; }\n"
"button:disabled { color: mix(@uu_fg, @uu_surface, 0.55); background-color: @uu_bg; border-color: @uu_border; }\n"
"button:focus, entry:focus { border-color: @uu_accent; outline-color: @uu_accent; outline-style: solid; outline-width: 2px; outline-offset: 2px; }\n"
"entry { background-image: none; background-color: @uu_surface; color: @uu_fg; border: 1px solid @uu_border; border-radius: 8px; box-shadow: none; padding: 7px 10px; }\n"
"entry:disabled { color: @uu_muted; background-color: @uu_bg; }\n"
"separator { background-color: @uu_border; min-height: 1px; min-width: 1px; }\n"
".card, .cardbtn, .banner { background-color: @uu_surface; border: 1px solid @uu_border; border-radius: 12px; }\n"
".heading, .title, .h2, .user { font-size: 22px; font-weight: 700; color: @uu_fg; }\n"
".section, .group { font-size: 16px; font-weight: 600; color: @uu_fg; }\n"
".big { font-size: 32px; font-weight: 700; color: @uu_fg; }\n"
".key, .hint, .empty { font-size: 14px; color: @uu_muted; }\n"
".note, .footer { font-size: 13px; color: @uu_muted; }\n"
".status { font-size: 13px; color: @uu_muted; }\n"
".status.ok, .online, .dot { color: @uu_success; }\n"
".status.error { color: @uu_error; }\n"
".tag { background-color: @uu_tint; color: @uu_fg; border-radius: 6px; padding: 3px 8px; font-size: 12px; }\n"
".tag.remote { color: @uu_success; }\n"
"button.primary, button.enter { background-color: @uu_accent; color: @uu_accent_fg; border-color: transparent; font-weight: 600; padding: 9px 24px; }\n"
"button.primary:hover, button.enter:hover { background-color: shade(@uu_accent, 0.9); }\n"
"button.primary:active, button.enter:active { background-color: shade(@uu_accent, 0.8); }\n"
"button.primary:disabled, button.enter:disabled { background-color: @uu_bg; color: @uu_muted; border-color: @uu_border; }\n"
"button.flat, button.hbtn, button.tool { background-color: transparent; border-color: transparent; }\n"
"button.flat:hover, button.hbtn:hover, button.tool:hover, button.cardbtn:hover { background-color: @uu_tint; border-color: @uu_border; }\n"
".toast { background-color: @uu_fg; color: @uu_surface; border-radius: 10px; padding: 12px 18px; font-size: 14px; }\n"
".qrbox { background-color: white; border: 1px solid @uu_border; border-radius: 12px; padding: 14px; }\n";
void uu_theme_load_css(const char *css) {
GtkCssProvider *provider = gtk_css_provider_new();
GError *error = NULL;
if (gtk_css_provider_load_from_data(provider, css, -1, &error))
gtk_style_context_add_provider_for_screen(gdk_screen_get_default(), GTK_STYLE_PROVIDER(provider), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION);
else { g_warning("Could not load UI stylesheet"); g_clear_error(&error); }
g_object_unref(provider);
}
static char *theme_path(void) {
return g_build_filename(g_get_user_config_dir(), "uuremote", "theme", NULL);
}
static void apply_mode(void) {
GtkSettings *settings = gtk_settings_get_default();
if (!mode) {
// Reset the application override, so subsequent desktop changes still propagate.
gtk_settings_reset_property(settings, "gtk-theme-name");
gtk_settings_reset_property(settings, "gtk-application-prefer-dark-theme");
} else {
g_object_set(settings, "gtk-theme-name", "Adwaita", "gtk-application-prefer-dark-theme", mode == 2, NULL);
}
}
void uu_theme_init(void) {
if (initialized) return;
initialized = 1;
char *path = theme_path(), *value = NULL;
if (g_file_get_contents(path, &value, NULL, NULL)) {
g_strstrip(value);
for (int i = 0; i < 3; i++) if (!strcmp(value, modes[i])) mode = i;
}
g_free(value); g_free(path);
apply_mode();
uu_theme_load_css(CSS);
}
static void on_theme(GtkComboBox *combo, gpointer note) {
int selected = gtk_combo_box_get_active(combo);
if (selected < 0 || selected > 2) return;
mode = selected;
apply_mode();
char *path = theme_path(), *dir = g_path_get_dirname(path);
gboolean saved = g_mkdir_with_parents(dir, 0700) == 0 && g_file_set_contents(path, modes[mode], -1, NULL);
gtk_label_set_text(GTK_LABEL(note), saved ? "" : L("无法保存外观设置", "Could not save appearance"));
gtk_widget_set_visible(GTK_WIDGET(note), !saved);
g_free(dir); g_free(path);
}
GtkWidget *uu_theme_selector(void) {
GtkWidget *box = gtk_box_new(GTK_ORIENTATION_VERTICAL, 6), *row = gtk_box_new(GTK_ORIENTATION_HORIZONTAL, 8);
GtkWidget *label = gtk_label_new(L("外观", "Appearance")), *combo = gtk_combo_box_text_new(), *note = gtk_label_new("");
gtk_style_context_add_class(gtk_widget_get_style_context(label), "key");
gtk_style_context_add_class(gtk_widget_get_style_context(note), "status");
gtk_style_context_add_class(gtk_widget_get_style_context(note), "error");
gtk_label_set_line_wrap(GTK_LABEL(note), TRUE);
gtk_widget_set_no_show_all(note, TRUE);
gtk_widget_set_halign(note, GTK_ALIGN_START);
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(combo), L("跟随系统", "System"));
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(combo), L("浅色", "Light"));
gtk_combo_box_text_append_text(GTK_COMBO_BOX_TEXT(combo), L("深色", "Dark"));
gtk_combo_box_set_active(GTK_COMBO_BOX(combo), mode);
atk_object_set_name(gtk_widget_get_accessible(combo), L("外观", "Appearance"));
g_signal_connect(combo, "changed", G_CALLBACK(on_theme), note);
gtk_box_pack_start(GTK_BOX(row), label, FALSE, FALSE, 0);
gtk_box_pack_end(GTK_BOX(row), combo, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(box), row, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(box), note, FALSE, FALSE, 0);
return box;
}
static void open_settings(GtkButton *button, gpointer parent) {
(void)button;
GtkWidget *dialog = gtk_dialog_new_with_buttons(L("设置", "Settings"), GTK_WINDOW(parent),
GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT, L("关闭", "Close"), GTK_RESPONSE_CLOSE, NULL);
GtkWidget *area = gtk_dialog_get_content_area(GTK_DIALOG(dialog));
gtk_window_set_default_size(GTK_WINDOW(dialog), 360, -1);
gtk_container_set_border_width(GTK_CONTAINER(area), 24);
gtk_box_pack_start(GTK_BOX(area), uu_theme_selector(), FALSE, FALSE, 0);
g_signal_connect_swapped(dialog, "response", G_CALLBACK(gtk_widget_destroy), dialog);
gtk_widget_show_all(dialog);
}
GtkWidget *uu_theme_settings_button(GtkWindow *parent) {
GtkWidget *button = gtk_button_new_from_icon_name("preferences-system-symbolic", GTK_ICON_SIZE_BUTTON);
gtk_style_context_add_class(gtk_widget_get_style_context(button), "flat");
gtk_widget_set_tooltip_text(button, L("设置", "Settings"));
atk_object_set_name(gtk_widget_get_accessible(button), L("设置", "Settings"));
g_signal_connect(button, "clicked", G_CALLBACK(open_settings), parent);
return button;
}
+10
View File
@@ -0,0 +1,10 @@
#ifndef UU_UI_THEME_H
#define UU_UI_THEME_H
#include <gtk/gtk.h>
// Call on the GTK thread, after gtk_init_check. Shared by the host and viewer tools.
void uu_theme_init(void);
GtkWidget *uu_theme_selector(void);
GtkWidget *uu_theme_settings_button(GtkWindow *parent);
void uu_theme_load_css(const char *css);
#endif
+58
View File
@@ -0,0 +1,58 @@
#include "uinput_keymap.h"
#include <X11/Xlib.h>
#include <X11/XKBlib.h>
#include <X11/keysym.h>
#include <string.h>
static size_t text_plan(XkbDescPtr map, const XkbStateRec *state,
const uint8_t *text, size_t length, UuTextKey *plan, size_t capacity) {
if (!map || !map->map || !map->map->modmap || !state || state->base_mods || state->latched_mods) return 0;
/* Prove the XKB -> evdev offset from physical key names rather than assuming a US layout. */
if (!map->names || !map->names->keys || map->min_key_code > 10 || map->max_key_code < 50 ||
memcmp(map->names->keys[10].name,"AE01",4) ||
memcmp(map->names->keys[38].name,"AC01",4) ||
memcmp(map->names->keys[50].name,"LFSH",4)) return 0;
uint16_t shift_code=0;
for (unsigned code=9; code<=map->max_key_code; code++) {
if (code>=map->min_key_code && code-8<=248 && (map->map->modmap[code] & ShiftMask)) {
shift_code=code-8; break;
}
}
UuTextKey lookup[128]={0};
for (unsigned shift=0; shift<2; shift++) {
if (shift && !shift_code) continue;
for (unsigned code=9; code<=map->max_key_code; code++) {
if (code<map->min_key_code || code-8>248) continue;
KeySym symbol=NoSymbol;
unsigned consumed=0;
unsigned modifiers=XkbBuildCoreState(state->locked_mods | (shift ? ShiftMask : 0),state->group);
if (!XkbTranslateKeyCode(map,code,modifiers,&consumed,&symbol)) continue;
UuTextKey key={.code=code-8,.shift=shift ? shift_code : 0};
if (symbol>=0x20 && symbol<=0x7e && !lookup[symbol].code) lookup[symbol]=key;
else if (symbol==XK_Return && !lookup['\n'].code) lookup['\n']=lookup['\r']=key;
else if (symbol==XK_Tab && !lookup['\t'].code) lookup['\t']=key;
}
}
size_t count=0;
while (count<length && count<capacity && text[count]<128 && lookup[text[count]].code) {
plan[count]=lookup[text[count]];
count++;
}
return count;
}
size_t uu_uinput_text_plan(const uint8_t *text, size_t length, UuTextKey *plan, size_t capacity) {
if (!text || !length || !plan || !capacity || text[0]>=128) return 0;
XInitThreads();
Display *display=XOpenDisplay(NULL);
if (!display) return 0;
XkbDescPtr map=XkbGetMap(display,XkbAllClientInfoMask,XkbUseCoreKbd);
XkbStateRec state;
size_t count=0;
if (map && XkbGetState(display,XkbUseCoreKbd,&state)==Success &&
XkbGetNames(display,XkbKeyNamesMask,map)==Success)
count=text_plan(map,&state,text,length,plan,capacity);
if (map) XkbFreeKeyboard(map,XkbAllComponentsMask,True);
XCloseDisplay(display);
return count;
}
+9
View File
@@ -0,0 +1,9 @@
#ifndef UU_UINPUT_KEYMAP_H
#define UU_UINPUT_KEYMAP_H
#include <stddef.h>
#include <stdint.h>
typedef struct { uint16_t code, shift; } UuTextKey;
/* Read-only XKB lookup; emits no input and never changes the keymap or clipboard.
* Return the number of initial ASCII characters representable by physical keys. */
size_t uu_uinput_text_plan(const uint8_t *text, size_t length, UuTextKey *plan, size_t capacity);
#endif
+863
View File
@@ -0,0 +1,863 @@
#include "vaapi_engine.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <dlfcn.h>
#include <va/va.h>
#include <va/va_drm.h>
#include <va/va_drmcommon.h>
#include <va/va_vpp.h>
#include <va/va_enc_h264.h>
// Runtime-loaded libva, like the NVENC engine's libcuda/libnvidia-encode: an inproc-av build
// must not add a hard DT_NEEDED on libva for users who never touch VAAPI.
// Signatures come from the installed headers via __typeof__ so they cannot drift.
static struct {
void *libva, *libva_drm;
__typeof__(vaGetDisplayDRM) *vaGetDisplayDRM;
__typeof__(vaInitialize) *vaInitialize;
__typeof__(vaTerminate) *vaTerminate;
__typeof__(vaErrorStr) *vaErrorStr;
__typeof__(vaCreateSurfaces) *vaCreateSurfaces;
__typeof__(vaDestroySurfaces) *vaDestroySurfaces;
__typeof__(vaCreateConfig) *vaCreateConfig;
__typeof__(vaDestroyConfig) *vaDestroyConfig;
__typeof__(vaCreateContext) *vaCreateContext;
__typeof__(vaDestroyContext) *vaDestroyContext;
__typeof__(vaCreateBuffer) *vaCreateBuffer;
__typeof__(vaDestroyBuffer) *vaDestroyBuffer;
__typeof__(vaMapBuffer) *vaMapBuffer;
__typeof__(vaUnmapBuffer) *vaUnmapBuffer;
__typeof__(vaCreateImage) *vaCreateImage;
__typeof__(vaDestroyImage) *vaDestroyImage;
__typeof__(vaPutImage) *vaPutImage;
__typeof__(vaBeginPicture) *vaBeginPicture;
__typeof__(vaRenderPicture) *vaRenderPicture;
__typeof__(vaEndPicture) *vaEndPicture;
__typeof__(vaSyncSurface) *vaSyncSurface;
} RT;
static int vaapi_load_runtime(void) {
if (RT.libva) return 0;
RT.libva = dlopen("libva.so.2", RTLD_NOW | RTLD_GLOBAL);
RT.libva_drm = dlopen("libva-drm.so.2", RTLD_NOW);
if (!RT.libva || !RT.libva_drm) {
fprintf(stderr, "[vaapi] dlopen libva/libva-drm failed\n");
return -1;
}
// libva-drm depends on libva, so one lookup covers both libraries
#define VA_LOAD(sym) do { \
*(void**)&RT.sym = dlsym(RT.libva_drm, #sym) ? dlsym(RT.libva_drm, #sym) : dlsym(RT.libva, #sym); \
if (!RT.sym) { dlclose(RT.libva_drm); dlclose(RT.libva); RT.libva = RT.libva_drm = NULL; return -1; } \
} while (0)
VA_LOAD(vaGetDisplayDRM);
VA_LOAD(vaInitialize);
VA_LOAD(vaTerminate);
VA_LOAD(vaErrorStr);
VA_LOAD(vaCreateSurfaces);
VA_LOAD(vaDestroySurfaces);
VA_LOAD(vaCreateConfig);
VA_LOAD(vaDestroyConfig);
VA_LOAD(vaCreateContext);
VA_LOAD(vaDestroyContext);
VA_LOAD(vaCreateBuffer);
VA_LOAD(vaDestroyBuffer);
VA_LOAD(vaMapBuffer);
VA_LOAD(vaUnmapBuffer);
VA_LOAD(vaCreateImage);
VA_LOAD(vaDestroyImage);
VA_LOAD(vaPutImage);
VA_LOAD(vaBeginPicture);
VA_LOAD(vaRenderPicture);
VA_LOAD(vaEndPicture);
VA_LOAD(vaSyncSurface);
#undef VA_LOAD
return 0;
}
struct VaapiEngine {
int drm_fd;
VADisplay va_dpy;
uint32_t cap_width; // capture (RGB input) size
uint32_t cap_height;
uint32_t width; // encode (output) size
uint32_t height;
uint32_t fps;
uint32_t gop;
int64_t target_bps;
int64_t max_bps;
int64_t buffer_bits;
int is_hevc;
uint32_t frame_count;
// frames since the last IDR (periodic GOP), the alternating idr_pic_id, and an IDR owed after a lost frame
uint32_t since_idr;
uint32_t idr_pic_id;
int idr_pending;
// frame_num / POC bookkeeping since the last IDR; H264 state the driver does not derive itself
uint32_t frame_num;
uint32_t rc_mode;
// DMA-BUF backing
int dma_fd;
uint32_t stride;
// Surfaces & Contexts
VASurfaceID in_rgb_surf;
VASurfaceID nv12_surf;
VASurfaceID recon_surfs[2];
VAConfigID vpp_cfg;
VAContextID vpp_ctx;
VABufferID vpp_buf;
VARectangle src_rect, dst_rect;
VAConfigID enc_cfg;
VAContextID enc_ctx;
VABufferID coded_buf;
uint8_t *output_staging;
uint32_t output_staging_cap;
// Host upload path: a VAImage the CPU writes, then vaPutImage into in_rgb_surf
VAImage upload_img;
int upload_ready;
};
// The VPP pipeline buffer points at the engine-owned rects, so VPP scales cap -> output
static int vaapi_make_vpp_buffer(VaapiEngine* engine) {
VAProcPipelineParameterBuffer vpp_param;
memset(&vpp_param, 0, sizeof(vpp_param));
vpp_param.surface = engine->in_rgb_surf;
vpp_param.surface_region = &engine->src_rect;
vpp_param.output_region = &engine->dst_rect;
return RT.vaCreateBuffer(engine->va_dpy, engine->vpp_ctx, VAProcPipelineParameterBufferType,
sizeof(vpp_param), 1, &vpp_param, &engine->vpp_buf) == VA_STATUS_SUCCESS ? 0 : -1;
}
VaapiEngine* vaapi_create(const VaapiConfig* config) {
if (!config || config->width == 0 || config->height == 0 || config->cap_width == 0 || config->cap_height == 0) return NULL;
if (vaapi_load_runtime() != 0) return NULL;
VaapiEngine* engine = (VaapiEngine*)calloc(1, sizeof(VaapiEngine));
if (!engine) return NULL;
engine->cap_width = config->cap_width;
engine->cap_height = config->cap_height;
engine->width = config->width;
engine->height = config->height;
engine->fps = config->fps > 0 ? config->fps : 60;
engine->gop = config->gop > 0 ? config->gop : 30;
engine->target_bps = config->target_bps > 0 ? config->target_bps : 6000000;
engine->max_bps = config->max_bps > engine->target_bps ? config->max_bps : engine->target_bps;
engine->buffer_bits = config->buffer_bits > 0 ? config->buffer_bits : engine->max_bps;
engine->is_hevc = config->is_hevc;
engine->dma_fd = -1;
// calloc leaves surface/context IDs at 0, which is a valid VA ID; mark them unset.
engine->in_rgb_surf = VA_INVALID_ID;
engine->nv12_surf = VA_INVALID_ID;
engine->recon_surfs[0] = VA_INVALID_ID;
engine->recon_surfs[1] = VA_INVALID_ID;
engine->vpp_cfg = VA_INVALID_ID;
engine->vpp_ctx = VA_INVALID_ID;
engine->vpp_buf = VA_INVALID_ID;
engine->enc_cfg = VA_INVALID_ID;
engine->enc_ctx = VA_INVALID_ID;
engine->coded_buf = VA_INVALID_ID;
engine->src_rect.width = config->cap_width;
engine->src_rect.height = config->cap_height;
engine->dst_rect.width = config->width;
engine->dst_rect.height = config->height;
engine->drm_fd = open(config->device ? config->device : "/dev/dri/renderD128", O_RDWR);
if (engine->drm_fd < 0) {
fprintf(stderr, "[vaapi] failed to open %s\n", config->device ? config->device : "/dev/dri/renderD128");
free(engine);
return NULL;
}
engine->va_dpy = RT.vaGetDisplayDRM(engine->drm_fd);
if (!engine->va_dpy) {
close(engine->drm_fd);
free(engine);
return NULL;
}
int maj, min;
VAStatus st = RT.vaInitialize(engine->va_dpy, &maj, &min);
if (st != VA_STATUS_SUCCESS) {
fprintf(stderr, "[vaapi] vaInitialize failed: %s\n", RT.vaErrorStr(st));
close(engine->drm_fd);
free(engine);
return NULL;
}
// 1. NV12 intermediate + two Recon surfaces at the encode size (ping-pong: a P frame must
// not reference the surface its own reconstruction is being written into)
st = RT.vaCreateSurfaces(engine->va_dpy, VA_RT_FORMAT_YUV420, engine->width, engine->height, &engine->nv12_surf, 1, NULL, 0);
if (st != VA_STATUS_SUCCESS) {
vaapi_destroy(engine);
return NULL;
}
st = RT.vaCreateSurfaces(engine->va_dpy, VA_RT_FORMAT_YUV420, engine->width, engine->height, engine->recon_surfs, 2, NULL, 0);
if (st != VA_STATUS_SUCCESS) {
vaapi_destroy(engine);
return NULL;
}
// 2. Setup VPP (Video Processing Pipeline for Hardware RGB->NV12 with scaling)
uint32_t vpp_w = engine->cap_width > engine->width ? engine->cap_width : engine->width;
uint32_t vpp_h = engine->cap_height > engine->height ? engine->cap_height : engine->height;
st = RT.vaCreateConfig(engine->va_dpy, VAProfileNone, VAEntrypointVideoProc, NULL, 0, &engine->vpp_cfg);
if (st != VA_STATUS_SUCCESS) {
vaapi_destroy(engine);
return NULL;
}
st = RT.vaCreateContext(engine->va_dpy, engine->vpp_cfg, vpp_w, vpp_h, 0, NULL, 0, &engine->vpp_ctx);
if (st != VA_STATUS_SUCCESS) {
vaapi_destroy(engine);
return NULL;
}
// 3. Setup H.264 / HEVC EncSlice
VAProfile profile = engine->is_hevc ? VAProfileHEVCMain : VAProfileH264Main;
VAConfigAttrib enc_attrib[3];
enc_attrib[0].type = VAConfigAttribRTFormat;
enc_attrib[0].value = VA_RT_FORMAT_YUV420;
enc_attrib[1].type = VAConfigAttribRateControl;
// The engine writes SPS, PPS and slice headers itself (see BitWriter)
enc_attrib[2].type = VAConfigAttribEncPackedHeaders;
enc_attrib[2].value = VA_ENC_PACKED_HEADER_SEQUENCE | VA_ENC_PACKED_HEADER_SLICE;
// VBR like the FFmpeg VAAPI pipeline (target + maxrate), then CBR, then CQP
enc_attrib[1].value = VA_RC_VBR;
engine->rc_mode = VA_RC_VBR;
st = RT.vaCreateConfig(engine->va_dpy, profile, VAEntrypointEncSlice, enc_attrib, 3, &engine->enc_cfg);
if (st != VA_STATUS_SUCCESS) {
enc_attrib[1].value = VA_RC_CBR;
engine->rc_mode = VA_RC_CBR;
st = RT.vaCreateConfig(engine->va_dpy, profile, VAEntrypointEncSlice, enc_attrib, 3, &engine->enc_cfg);
}
if (st != VA_STATUS_SUCCESS) {
// Fallback to CQP if CBR unsupported
enc_attrib[1].value = VA_RC_CQP;
st = RT.vaCreateConfig(engine->va_dpy, profile, VAEntrypointEncSlice, enc_attrib, 3, &engine->enc_cfg);
if (st != VA_STATUS_SUCCESS) {
fprintf(stderr, "[vaapi] vaCreateConfig EncSlice failed: %s\n", RT.vaErrorStr(st));
vaapi_destroy(engine);
return NULL;
}
engine->rc_mode = VA_RC_CQP;
}
st = RT.vaCreateContext(engine->va_dpy, engine->enc_cfg, engine->width, engine->height, VA_PROGRESSIVE, engine->recon_surfs, 2, &engine->enc_ctx);
if (st != VA_STATUS_SUCCESS) {
fprintf(stderr, "[vaapi] vaCreateContext EncSlice failed: %s\n", RT.vaErrorStr(st));
vaapi_destroy(engine);
return NULL;
}
// Coded bitstream buffer: generous, a 20M-preset intra frame can burst past 4MB
st = RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncCodedBufferType, 16 * 1024 * 1024, 1, NULL, &engine->coded_buf);
if (st != VA_STATUS_SUCCESS) {
vaapi_destroy(engine);
return NULL;
}
return engine;
}
int vaapi_import_dma_buffer(VaapiEngine* engine, int dma_fd, uint32_t stride) {
if (!engine) return -1;
UuDmaFrame frame = {
.fd=dma_fd, .fourcc=0x34325258, .width=engine->cap_width, .height=engine->cap_height,
.stride=stride, .size=stride * engine->cap_height, .modifier=0
};
return vaapi_import_frame(engine, &frame);
}
static void vaapi_clear_input(VaapiEngine *engine) {
if (engine->vpp_buf != VA_INVALID_ID) {
RT.vaDestroyBuffer(engine->va_dpy, engine->vpp_buf);
engine->vpp_buf = VA_INVALID_ID;
}
if (engine->in_rgb_surf != VA_INVALID_ID) {
RT.vaDestroySurfaces(engine->va_dpy, &engine->in_rgb_surf, 1);
engine->in_rgb_surf = VA_INVALID_ID;
}
engine->dma_fd = -1;
}
int vaapi_import_frame(VaapiEngine *engine, const UuDmaFrame *frame) {
if (!engine || !frame || frame->fd < 0 || frame->width != engine->cap_width ||
frame->height != engine->cap_height || !frame->height || frame->stride < (uint64_t)frame->width * 4 ||
(uint64_t)frame->offset + (uint64_t)(frame->height - 1) * frame->stride + (uint64_t)frame->width * 4 > frame->size)
return -1;
uint32_t va_fourcc;
switch (frame->fourcc) {
case 0x34325258: va_fourcc=VA_FOURCC_BGRX; break; /* DRM_FORMAT_XRGB8888 */
case 0x34325241: va_fourcc=VA_FOURCC_BGRA; break; /* DRM_FORMAT_ARGB8888 */
case 0x34324258: va_fourcc=VA_FOURCC_RGBX; break; /* DRM_FORMAT_XBGR8888 */
case 0x34324241: va_fourcc=VA_FOURCC_RGBA; break; /* DRM_FORMAT_ABGR8888 */
default: return -1;
}
vaapi_clear_input(engine);
engine->dma_fd = frame->fd;
engine->stride = frame->stride;
VADRMPRIMESurfaceDescriptor prime_desc;
memset(&prime_desc, 0, sizeof(prime_desc));
prime_desc.fourcc = va_fourcc;
prime_desc.width = engine->cap_width;
prime_desc.height = engine->cap_height;
prime_desc.num_objects = 1;
prime_desc.objects[0].fd = frame->fd;
prime_desc.objects[0].size = frame->size;
prime_desc.objects[0].drm_format_modifier = frame->modifier;
prime_desc.num_layers = 1;
prime_desc.layers[0].drm_format = frame->fourcc;
prime_desc.layers[0].num_planes = 1;
prime_desc.layers[0].pitch[0] = frame->stride;
prime_desc.layers[0].offset[0] = frame->offset;
VASurfaceAttrib attribs[2];
attribs[0].type = VASurfaceAttribMemoryType;
attribs[0].flags = VA_SURFACE_ATTRIB_SETTABLE;
attribs[0].value.type = VAGenericValueTypeInteger;
attribs[0].value.value.i = VA_SURFACE_ATTRIB_MEM_TYPE_DRM_PRIME_2;
attribs[1].type = VASurfaceAttribExternalBufferDescriptor;
attribs[1].flags = VA_SURFACE_ATTRIB_SETTABLE;
attribs[1].value.type = VAGenericValueTypePointer;
attribs[1].value.value.p = &prime_desc;
VAStatus st = RT.vaCreateSurfaces(engine->va_dpy, VA_RT_FORMAT_RGB32, engine->cap_width, engine->cap_height, &engine->in_rgb_surf, 1, attribs, 2);
if (st != VA_STATUS_SUCCESS) {
fprintf(stderr, "[vaapi] vaCreateSurfaces DRM_PRIME_2 failed: %s\n", RT.vaErrorStr(st));
return -1;
}
if (vaapi_make_vpp_buffer(engine) != 0) {
fprintf(stderr, "[vaapi] vaCreateBuffer VPP failed\n");
return -2;
}
return 0;
}
int vaapi_upload_host_buffer(VaapiEngine* engine, const uint8_t* host_ptr, uint32_t pitch) {
if (!engine || !host_ptr) return -1;
/* Never write a fallback image into the compositor's imported buffer. */
if (engine->dma_fd >= 0) vaapi_clear_input(engine);
if (engine->in_rgb_surf == VA_INVALID_ID) {
VAStatus st = RT.vaCreateSurfaces(engine->va_dpy, VA_RT_FORMAT_RGB32, engine->cap_width, engine->cap_height, &engine->in_rgb_surf, 1, NULL, 0);
if (st != VA_STATUS_SUCCESS) return -2;
if (vaapi_make_vpp_buffer(engine) != 0) return -3;
}
if (!engine->upload_ready) {
VAImageFormat fmt;
memset(&fmt, 0, sizeof(fmt));
fmt.fourcc = VA_FOURCC_BGRX;
fmt.byte_order = VA_LSB_FIRST;
fmt.bits_per_pixel = 32;
fmt.depth = 24;
fmt.red_mask = 0x00ff0000;
fmt.green_mask = 0x0000ff00;
fmt.blue_mask = 0x000000ff;
// vaDeriveImage on the RGB32 surface is refused by some drivers
VAStatus st = RT.vaCreateImage(engine->va_dpy, &fmt, engine->cap_width, engine->cap_height, &engine->upload_img);
if (st != VA_STATUS_SUCCESS) return -4;
engine->upload_ready = 1;
}
void* p = NULL;
VAStatus st = RT.vaMapBuffer(engine->va_dpy, engine->upload_img.buf, &p);
if (st != VA_STATUS_SUCCESS || !p) return -5;
uint32_t copy_bytes = engine->cap_width * 4;
for (uint32_t y = 0; y < engine->cap_height; y++) {
memcpy((uint8_t*)p + y * engine->upload_img.pitches[0], host_ptr + y * pitch, copy_bytes);
}
RT.vaUnmapBuffer(engine->va_dpy, engine->upload_img.buf);
st = RT.vaPutImage(engine->va_dpy, engine->in_rgb_surf, engine->upload_img.image_id,
0, 0, engine->cap_width, engine->cap_height, 0, 0, engine->cap_width, engine->cap_height);
if (st != VA_STATUS_SUCCESS) return -6;
return 0;
}
// Sequence-level misc parameter. AMD's Mesa driver feeds the VCN ring message from these;
// a CBR config that never gets its rate-control/HRD parameters submits garbage and the
// encode job wedges the ring until a GPU reset.
// Packed H.264 / HEVC headers. Current radeonsi (Mesa 26) writes neither SPS/PPS nor the NAL/slice header from the
// parameter buffers alone (output began 00 00 00 01 00 ..., no SPS), so the host writes them like FFmpeg does.
// Every field here must match the sequence/picture/slice parameters submitted with it.
typedef struct { uint8_t buf[128]; uint32_t bits; } BitWriter;
static void bw_put(BitWriter* w, uint32_t value, int n) {
for (int i = n - 1; i >= 0; i--, w->bits++) {
if (w->bits / 8 >= sizeof(w->buf)) return;
if ((value >> i) & 1) w->buf[w->bits / 8] |= 0x80 >> (w->bits % 8);
}
}
static void bw_ue(BitWriter* w, uint32_t value) {
int len = 0;
for (uint32_t v = value + 1; v > 1; v >>= 1) len++;
bw_put(w, 0, len);
bw_put(w, value + 1, len + 1);
}
static void bw_se(BitWriter* w, int32_t value) { bw_ue(w, value > 0 ? 2 * (uint32_t)value - 1 : 2 * (uint32_t)(-value)); }
static void bw_trailing(BitWriter* w) { bw_put(w, 1, 1); if (w->bits % 8) bw_put(w, 0, 8 - w->bits % 8); }
// Start code + NAL header; the payload follows unescaped, emulation prevention is applied by bw_escape.
static void bw_nal(BitWriter* w, int ref_idc, int type) { bw_put(w, 1, 32); bw_put(w, (ref_idc << 5) | type, 8); }
// Insert emulation prevention bytes after the start code + NAL header (byte 5 on). Returns the byte length.
static uint32_t bw_escape(const BitWriter* w, uint8_t* out, uint32_t cap) {
uint32_t len = (w->bits + 7) / 8, n = 0, zeros = 0;
for (uint32_t i = 0; i < len && n < cap; i++) {
if (i >= 5 && zeros >= 2 && w->buf[i] <= 3) { out[n++] = 3; zeros = 0; if (n >= cap) break; }
zeros = w->buf[i] == 0 && i >= 5 ? zeros + 1 : 0;
out[n++] = w->buf[i];
}
return n;
}
// Each NAL is escaped on its own, so the next NAL's start code stays intact.
static int vaapi_add_packed(VaapiEngine* engine, VAEncPackedHeaderType type, const BitWriter* nals, int count,
VABufferID* ids, int* n) {
uint8_t data[320];
uint32_t bytes = 0;
for (int i = 0; i < count; i++) bytes += bw_escape(&nals[i], data + bytes, sizeof(data) - bytes);
VAEncPackedHeaderParameterBuffer param = { .type = type, .bit_length = bytes * 8, .has_emulation_bytes = 1 };
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncPackedHeaderParameterBufferType, sizeof(param), 1, &param, &ids[*n]) != VA_STATUS_SUCCESS)
return -1;
(*n)++;
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncPackedHeaderDataBufferType, bytes, 1, data, &ids[*n]) != VA_STATUS_SUCCESS)
return -1;
(*n)++;
return 0;
}
static VABufferID vaapi_create_misc_buffer(VaapiEngine* engine, VAEncMiscParameterType type, const void* param, uint32_t param_size) {
uint8_t buf[sizeof(VAEncMiscParameterBuffer) + 64];
VAEncMiscParameterBuffer* misc = (VAEncMiscParameterBuffer*)buf;
misc->type = type;
memcpy(misc->data, param, param_size);
VABufferID id = VA_INVALID_ID;
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncMiscParameterBufferType,
sizeof(VAEncMiscParameterBuffer) + param_size, 1, buf, &id) != VA_STATUS_SUCCESS) {
return VA_INVALID_ID;
}
return id;
}
// Buffers for one encoded picture; every created ID is destroyed after the picture, success or not.
typedef struct {
VABufferID seq, misc[3], pic, slice, packed[6];
int misc_n, packed_n;
} EncBuffers;
static int vaapi_h264_params(VaapiEngine* engine, int is_idr, VASurfaceID curr_recon, VASurfaceID prev_recon, EncBuffers* b) {
uint32_t mb_w = (engine->width + 15) / 16;
uint32_t mb_h = (engine->height + 15) / 16;
uint32_t frame_num = is_idr ? 0 : engine->frame_num;
uint32_t crop_right = (mb_w * 16 - engine->width) / 2, crop_bottom = (mb_h * 16 - engine->height) / 2;
if (is_idr) {
VAEncSequenceParameterBufferH264 seq_p;
memset(&seq_p, 0, sizeof(seq_p));
seq_p.seq_parameter_set_id = 0;
seq_p.level_idc = 51;
seq_p.intra_period = engine->gop;
seq_p.intra_idr_period = engine->gop;
seq_p.ip_period = 1;
seq_p.bits_per_second = (uint32_t)engine->max_bps;
seq_p.max_num_ref_frames = 1;
seq_p.picture_width_in_mbs = mb_w;
seq_p.picture_height_in_mbs = mb_h;
seq_p.seq_fields.bits.direct_8x8_inference_flag = 1;
seq_p.seq_fields.bits.frame_mbs_only_flag = 1;
seq_p.seq_fields.bits.pic_order_cnt_type = 0;
seq_p.frame_cropping_flag = crop_right || crop_bottom;
seq_p.frame_crop_right_offset = crop_right;
seq_p.frame_crop_bottom_offset = crop_bottom;
// An IDR without its SPS is undecodable: fail rather than submit pic + slice alone
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncSequenceParameterBufferType, sizeof(seq_p), 1, &seq_p, &b->seq) != VA_STATUS_SUCCESS)
return -1;
// SPS: Main, level 5.1, frame_num and POC lsb 4 bits (both wrap & 15 above), one reference
BitWriter sps = {0};
bw_nal(&sps, 3, 7);
bw_put(&sps, 77, 8); bw_put(&sps, 0x40, 8); bw_put(&sps, 51, 8); // constraint_set1: Main
bw_ue(&sps, 0); bw_ue(&sps, 0); bw_ue(&sps, 0); bw_ue(&sps, 0); // sps id, log2_max_frame_num-4, poc type 0, log2_max_poc_lsb-4
bw_ue(&sps, 1); bw_put(&sps, 0, 1); // max_num_ref_frames, gaps
bw_ue(&sps, mb_w - 1); bw_ue(&sps, mb_h - 1);
bw_put(&sps, 1, 1); bw_put(&sps, 1, 1); // frame_mbs_only, direct_8x8_inference
bw_put(&sps, seq_p.frame_cropping_flag, 1);
if (seq_p.frame_cropping_flag) { bw_ue(&sps, 0); bw_ue(&sps, crop_right); bw_ue(&sps, 0); bw_ue(&sps, crop_bottom); }
bw_put(&sps, 0, 1); // no VUI
bw_trailing(&sps);
// PPS: CABAC, one L0 reference, QP 26, default deblocking
BitWriter pps = {0};
bw_nal(&pps, 3, 8);
bw_ue(&pps, 0); bw_ue(&pps, 0); bw_put(&pps, 1, 1); bw_put(&pps, 0, 1);
bw_ue(&pps, 0); bw_ue(&pps, 0); bw_ue(&pps, 0); // slice groups, num_ref_idx l0/l1 - 1
bw_put(&pps, 0, 1); bw_put(&pps, 0, 2); // weighted pred / bipred
bw_se(&pps, 0); bw_se(&pps, 0); bw_se(&pps, 0); // pic_init_qp-26, qs, chroma offset
bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); // deblocking control, constrained intra, redundant
bw_trailing(&pps);
// SPS and PPS go out as one Sequence header, like FFmpeg
BitWriter headers[2] = { sps, pps };
if (vaapi_add_packed(engine, VAEncPackedHeaderSequence, headers, 2, b->packed, &b->packed_n) != 0) return -1;
}
VAEncPictureParameterBufferH264 pic_p;
memset(&pic_p, 0, sizeof(pic_p));
pic_p.CurrPic.picture_id = curr_recon;
pic_p.CurrPic.flags = VA_PICTURE_H264_SHORT_TERM_REFERENCE;
pic_p.CurrPic.frame_idx = frame_num;
pic_p.CurrPic.TopFieldOrderCnt = pic_p.CurrPic.BottomFieldOrderCnt = (2 * frame_num) & 15;
for (int i = 0; i < 16; i++) pic_p.ReferenceFrames[i].picture_id = VA_INVALID_ID;
if (!is_idr) {
pic_p.ReferenceFrames[0].picture_id = prev_recon;
pic_p.ReferenceFrames[0].flags = VA_PICTURE_H264_SHORT_TERM_REFERENCE;
pic_p.ReferenceFrames[0].frame_idx = (frame_num - 1) & 15;
pic_p.ReferenceFrames[0].TopFieldOrderCnt = pic_p.ReferenceFrames[0].BottomFieldOrderCnt = (2 * (frame_num - 1)) & 15;
}
pic_p.coded_buf = engine->coded_buf;
pic_p.frame_num = frame_num;
pic_p.pic_init_qp = 26;
pic_p.seq_parameter_set_id = 0;
pic_p.pic_parameter_set_id = 0;
pic_p.pic_fields.bits.idr_pic_flag = is_idr ? 1 : 0;
pic_p.pic_fields.bits.reference_pic_flag = 1;
pic_p.pic_fields.bits.entropy_coding_mode_flag = 1;
pic_p.pic_fields.bits.deblocking_filter_control_present_flag = 0;
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncPictureParameterBufferType, sizeof(pic_p), 1, &pic_p, &b->pic) != VA_STATUS_SUCCESS)
return -1;
VAEncSliceParameterBufferH264 slice_p;
memset(&slice_p, 0, sizeof(slice_p));
slice_p.macroblock_address = 0;
slice_p.num_macroblocks = mb_w * mb_h;
slice_p.macroblock_info = VA_INVALID_ID;
slice_p.slice_type = is_idr ? 2 : 0; // 2 = I-Slice, 0 = P-Slice
slice_p.direct_spatial_mv_pred_flag = 1;
// Consecutive IDRs must differ in idr_pic_id (7.4.3); flip it on every IDR
if (is_idr) engine->idr_pic_id ^= 1;
slice_p.idr_pic_id = engine->idr_pic_id;
slice_p.pic_order_cnt_lsb = pic_p.CurrPic.TopFieldOrderCnt;
for (int i = 0; i < 32; i++) slice_p.RefPicList0[i].picture_id = VA_INVALID_ID;
if (!is_idr) {
slice_p.RefPicList0[0].picture_id = prev_recon;
slice_p.RefPicList0[0].flags = VA_PICTURE_H264_SHORT_TERM_REFERENCE;
slice_p.RefPicList0[0].frame_idx = (frame_num - 1) & 15;
}
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncSliceParameterBufferType, sizeof(slice_p), 1, &slice_p, &b->slice) != VA_STATUS_SUCCESS)
return -1;
// Slice header including cabac_alignment_one_bit, byte aligned and escaped as FFmpeg submits it
BitWriter sh = {0};
bw_nal(&sh, 3, is_idr ? 5 : 1);
bw_ue(&sh, 0); bw_ue(&sh, is_idr ? 7 : 5); bw_ue(&sh, 0); // first_mb, slice_type I/P (all slices), pps id
bw_put(&sh, frame_num & 15, 4);
if (is_idr) bw_ue(&sh, slice_p.idr_pic_id);
bw_put(&sh, slice_p.pic_order_cnt_lsb & 15, 4);
if (!is_idr) { bw_put(&sh, 0, 1); bw_put(&sh, 0, 1); } // num_ref_idx override, ref list modification
if (is_idr) { bw_put(&sh, 0, 1); bw_put(&sh, 0, 1); } // no_output_of_prior_pics, long_term_reference
else bw_put(&sh, 0, 1); // adaptive_ref_pic_marking
if (!is_idr) bw_ue(&sh, 0); // cabac_init_idc
bw_se(&sh, 0); // slice_qp_delta (no deblocking fields)
while (sh.bits % 8) bw_put(&sh, 1, 1);
return vaapi_add_packed(engine, VAEncPackedHeaderSlice, &sh, 1, b->packed, &b->packed_n);
}
// HEVC NAL header: forbidden 0, nal_unit_type, nuh_layer_id 0, nuh_temporal_id_plus1 1.
static void bw_hevc_nal(BitWriter* w, int type) { bw_put(w, 1, 32); bw_put(w, (type << 9) | 1, 16); }
// profile_tier_level(1, 0): Main, Main 10 compatible like FFmpeg, progressive frames only.
static void bw_hevc_ptl(BitWriter* w, uint32_t level) {
bw_put(w, 0, 2); bw_put(w, 0, 1); bw_put(w, 1, 5); // profile space, tier, general_profile_idc Main
bw_put(w, 0x60000000, 32); // compatibility flags 1 and 2
bw_put(w, 1, 1); bw_put(w, 0, 1); bw_put(w, 1, 1); bw_put(w, 1, 1); // progressive, interlaced, non_packed, frame_only
bw_put(w, 0, 32); bw_put(w, 0, 12); // reserved_zero_43bits + inbld_flag
bw_put(w, level, 8);
}
// HEVC Main with FFmpeg's hevc_vaapi parameters on radeonsi (LIBVA_TRACE + trace_headers of its output):
// 64x64 CTB, 8x8 min CB, 4x4..32x32 TB, AMP and SAO on, one short-term reference, POC lsb 12 bits.
// FFmpeg also sends VA max_transform_hierarchy_depth 0 / diff_cu_qp_delta_depth 3 while its SPS/PPS
// say 4 / 0; both copies are kept as FFmpeg has them, since that is what decodes on this driver.
static int vaapi_hevc_params(VaapiEngine* engine, int is_idr, VASurfaceID curr_recon, VASurfaceID prev_recon, EncBuffers* b) {
// pic size must be a multiple of the 8x8 min CB; the conformance window (in chroma units) crops the rest
uint32_t w = (engine->width + 7) & ~7u, h = (engine->height + 7) & ~7u;
uint32_t crop_right = (w - engine->width) / 2, crop_bottom = (h - engine->height) / 2;
uint32_t poc = is_idr ? 0 : engine->since_idr;
// Level from luma picture size and sample rate (Table A.8): 4.1, 5.0, 5.1, 5.2
uint64_t size = (uint64_t)w * h, rate = size * engine->fps;
uint32_t level = rate > 534773760 ? 156 : rate > 267386880 ? 153 : (size > 2228224 || rate > 133693440) ? 150 : 123;
if (is_idr) {
VAEncSequenceParameterBufferHEVC seq_p;
memset(&seq_p, 0, sizeof(seq_p));
seq_p.general_profile_idc = 1;
seq_p.general_level_idc = level;
seq_p.intra_period = engine->gop;
seq_p.intra_idr_period = engine->gop;
seq_p.ip_period = 1;
seq_p.bits_per_second = (uint32_t)engine->max_bps;
seq_p.pic_width_in_luma_samples = w;
seq_p.pic_height_in_luma_samples = h;
seq_p.seq_fields.bits.chroma_format_idc = 1;
seq_p.seq_fields.bits.amp_enabled_flag = 1;
seq_p.seq_fields.bits.sample_adaptive_offset_enabled_flag = 1;
seq_p.log2_diff_max_min_luma_coding_block_size = 3;
seq_p.log2_diff_max_min_transform_block_size = 3;
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncSequenceParameterBufferType, sizeof(seq_p), 1, &seq_p, &b->seq) != VA_STATUS_SUCCESS)
return -1;
BitWriter vps = {0};
bw_hevc_nal(&vps, 32);
bw_put(&vps, 0, 4); bw_put(&vps, 1, 1); bw_put(&vps, 1, 1); // vps id, base layer internal / available
bw_put(&vps, 0, 6); bw_put(&vps, 0, 3); bw_put(&vps, 1, 1); // max layers-1, max sub layers-1, temporal id nesting
bw_put(&vps, 0xffff, 16);
bw_hevc_ptl(&vps, level);
bw_put(&vps, 0, 1); bw_ue(&vps, 1); bw_ue(&vps, 0); bw_ue(&vps, 0); // ordering info: dec buffering-1, reorder, latency
bw_put(&vps, 0, 6); bw_ue(&vps, 0); // max layer id, num layer sets-1
bw_put(&vps, 0, 1); bw_put(&vps, 0, 1); // no timing info, no extension
bw_trailing(&vps);
BitWriter sps = {0};
bw_hevc_nal(&sps, 33);
bw_put(&sps, 0, 4); bw_put(&sps, 0, 3); bw_put(&sps, 1, 1); // vps id, max sub layers-1, temporal id nesting
bw_hevc_ptl(&sps, level);
bw_ue(&sps, 0); bw_ue(&sps, 1); bw_ue(&sps, w); bw_ue(&sps, h); // sps id, 4:2:0, size
bw_put(&sps, crop_right || crop_bottom, 1);
if (crop_right || crop_bottom) { bw_ue(&sps, 0); bw_ue(&sps, crop_right); bw_ue(&sps, 0); bw_ue(&sps, crop_bottom); }
bw_ue(&sps, 0); bw_ue(&sps, 0); bw_ue(&sps, 8); // 8-bit luma/chroma, log2_max_poc_lsb-4
bw_put(&sps, 0, 1); bw_ue(&sps, 1); bw_ue(&sps, 0); bw_ue(&sps, 0);
bw_ue(&sps, 0); bw_ue(&sps, 3); bw_ue(&sps, 0); bw_ue(&sps, 3); // CB 8..64, TB 4..32
bw_ue(&sps, 4); bw_ue(&sps, 4); // max transform hierarchy depth inter/intra
bw_put(&sps, 0, 1); bw_put(&sps, 1, 1); bw_put(&sps, 1, 1); bw_put(&sps, 0, 1); // scaling list, AMP, SAO, PCM
bw_ue(&sps, 0); bw_put(&sps, 0, 1); // RPS in slice headers, no long-term refs
bw_put(&sps, 0, 1); bw_put(&sps, 0, 1); // temporal MVP, strong intra smoothing
bw_put(&sps, 0, 1); bw_put(&sps, 0, 1); // no VUI, no extension
bw_trailing(&sps);
BitWriter pps = {0};
bw_hevc_nal(&pps, 34);
bw_ue(&pps, 0); bw_ue(&pps, 0);
bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); bw_put(&pps, 0, 3); // dependent slices, output flag, extra bits
bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); // sign data hiding, cabac init present
bw_ue(&pps, 0); bw_ue(&pps, 0); bw_se(&pps, 0); // num_ref_idx l0/l1 default-1, init_qp-26
bw_put(&pps, 0, 1); bw_put(&pps, 1, 1); bw_put(&pps, 1, 1); // constrained intra, transform skip, cu_qp_delta
bw_ue(&pps, 0); bw_se(&pps, 0); bw_se(&pps, 0); // diff_cu_qp_delta_depth, cb/cr offsets
bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); // slice chroma offsets, weighted pred/bipred
bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); // transquant bypass, tiles, entropy sync
bw_put(&pps, 1, 1); bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); // loop filter across slices, deblocking ctl, scaling
bw_put(&pps, 0, 1); bw_ue(&pps, 0); bw_put(&pps, 0, 1); bw_put(&pps, 0, 1); // list mod, merge level-2, ext
bw_trailing(&pps);
BitWriter headers[3] = { vps, sps, pps };
if (vaapi_add_packed(engine, VAEncPackedHeaderSequence, headers, 3, b->packed, &b->packed_n) != 0) return -1;
}
VAEncPictureParameterBufferHEVC pic_p;
memset(&pic_p, 0, sizeof(pic_p));
pic_p.decoded_curr_pic.picture_id = curr_recon;
pic_p.decoded_curr_pic.pic_order_cnt = poc;
for (int i = 0; i < 15; i++) {
pic_p.reference_frames[i].picture_id = VA_INVALID_ID;
pic_p.reference_frames[i].flags = VA_PICTURE_HEVC_INVALID;
}
if (!is_idr) {
pic_p.reference_frames[0].picture_id = prev_recon;
pic_p.reference_frames[0].pic_order_cnt = poc - 1;
pic_p.reference_frames[0].flags = VA_PICTURE_HEVC_RPS_ST_CURR_BEFORE;
}
pic_p.coded_buf = engine->coded_buf;
pic_p.collocated_ref_pic_index = 0xff;
pic_p.pic_init_qp = 30;
pic_p.diff_cu_qp_delta_depth = 3;
pic_p.nal_unit_type = is_idr ? 19 : 1; // IDR_W_RADL / TRAIL_R
pic_p.pic_fields.bits.idr_pic_flag = is_idr;
pic_p.pic_fields.bits.coding_type = is_idr ? 1 : 2;
pic_p.pic_fields.bits.reference_pic_flag = 1;
pic_p.pic_fields.bits.transform_skip_enabled_flag = 1;
pic_p.pic_fields.bits.cu_qp_delta_enabled_flag = 1;
pic_p.pic_fields.bits.pps_loop_filter_across_slices_enabled_flag = 1;
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncPictureParameterBufferType, sizeof(pic_p), 1, &pic_p, &b->pic) != VA_STATUS_SUCCESS)
return -1;
VAEncSliceParameterBufferHEVC slice_p;
memset(&slice_p, 0, sizeof(slice_p));
slice_p.num_ctu_in_slice = ((w + 63) / 64) * ((h + 63) / 64);
slice_p.slice_type = is_idr ? 2 : 1; // I / P
for (int i = 0; i < 15; i++) {
slice_p.ref_pic_list0[i].picture_id = slice_p.ref_pic_list1[i].picture_id = VA_INVALID_ID;
slice_p.ref_pic_list0[i].flags = slice_p.ref_pic_list1[i].flags = VA_PICTURE_HEVC_INVALID;
}
if (!is_idr) slice_p.ref_pic_list0[0] = pic_p.reference_frames[0];
slice_p.max_num_merge_cand = 5;
slice_p.slice_fields.bits.last_slice_of_pic_flag = 1;
slice_p.slice_fields.bits.slice_sao_luma_flag = 1;
slice_p.slice_fields.bits.slice_sao_chroma_flag = 1;
slice_p.slice_fields.bits.collocated_from_l0_flag = !is_idr;
if (RT.vaCreateBuffer(engine->va_dpy, engine->enc_ctx, VAEncSliceParameterBufferType, sizeof(slice_p), 1, &slice_p, &b->slice) != VA_STATUS_SUCCESS)
return -1;
BitWriter sh = {0};
bw_hevc_nal(&sh, pic_p.nal_unit_type);
bw_put(&sh, 1, 1); // first slice segment
if (is_idr) bw_put(&sh, 0, 1); // no_output_of_prior_pics
bw_ue(&sh, 0); bw_ue(&sh, slice_p.slice_type); // pps id, slice type
if (!is_idr) {
bw_put(&sh, poc & 0xfff, 12);
bw_put(&sh, 0, 1); // RPS coded here: one previous picture
bw_ue(&sh, 1); bw_ue(&sh, 0); bw_ue(&sh, 0); bw_put(&sh, 1, 1); // negative 1, positive 0, delta-1 0, used
}
bw_put(&sh, 1, 1); bw_put(&sh, 1, 1); // SAO luma, chroma
if (!is_idr) { bw_put(&sh, 0, 1); bw_ue(&sh, 0); } // num_ref_idx override, five_minus_max_merge
bw_se(&sh, 0); // slice_qp_delta (the driver writes the real one)
bw_put(&sh, 0, 1); // loop filter across slices
bw_put(&sh, 1, 1); // byte_alignment()
while (sh.bits % 8) bw_put(&sh, 0, 1);
return vaapi_add_packed(engine, VAEncPackedHeaderSlice, &sh, 1, b->packed, &b->packed_n);
}
int vaapi_encode_frame(
VaapiEngine* engine,
int force_idr,
const uint8_t** out_data,
uint32_t* out_len
) {
if (out_data) *out_data = NULL;
if (out_len) *out_len = 0;
if (!engine || engine->in_rgb_surf == VA_INVALID_ID) return -1;
int is_idr = force_idr || engine->idr_pending || engine->frame_count == 0 || engine->since_idr >= engine->gop;
// Recon ping-pong: a P frame must reference the previous recon surface, not its own
VASurfaceID curr_recon = engine->recon_surfs[engine->frame_count & 1];
VASurfaceID prev_recon = engine->recon_surfs[(engine->frame_count + 1) & 1];
// 1. Hardware VPP Color Conversion + scaling (RGB -> NV12 entirely inside VRAM)
VAStatus st = RT.vaBeginPicture(engine->va_dpy, engine->vpp_ctx, engine->nv12_surf);
if (st != VA_STATUS_SUCCESS) return -10;
st = RT.vaRenderPicture(engine->va_dpy, engine->vpp_ctx, &engine->vpp_buf, 1);
if (st != VA_STATUS_SUCCESS) return -10;
st = RT.vaEndPicture(engine->va_dpy, engine->vpp_ctx);
if (st != VA_STATUS_SUCCESS) return -10;
// 2. Rate control (every IDR) and the codec's sequence / picture / slice parameters + packed headers
EncBuffers b = { .seq = VA_INVALID_ID, .pic = VA_INVALID_ID, .slice = VA_INVALID_ID };
int ret = -11;
if (is_idr) {
VAEncMiscParameterRateControl rc;
memset(&rc, 0, sizeof(rc));
// VBR: bits_per_second is the ceiling (maxrate) and target_percentage the average (#33)
rc.bits_per_second = (uint32_t)engine->max_bps;
rc.target_percentage = engine->rc_mode == VA_RC_VBR ? (uint32_t)(engine->target_bps * 100 / engine->max_bps) : 100;
rc.window_size = 1000;
rc.initial_qp = 28;
rc.min_qp = 16;
// The driver's VBR raises QP only up to max_qp; 44 blocked the capped presets from reaching
// the QP 51 hardware floor on hard content (2560x1600 testsrc2: 4.16 -> 2.60 Mbps, #33)
rc.max_qp = 51;
rc.rc_flags.bits.disable_frame_skip = 1; // a remote desktop must not drop frames silently
b.misc[b.misc_n++] = vaapi_create_misc_buffer(engine, VAEncMiscParameterTypeRateControl, &rc, sizeof(rc));
VAEncMiscParameterHRD hrd;
memset(&hrd, 0, sizeof(hrd));
hrd.buffer_size = (uint32_t)engine->buffer_bits; // the viewer preset's bufsize
hrd.initial_buffer_fullness = hrd.buffer_size / 2;
b.misc[b.misc_n++] = vaapi_create_misc_buffer(engine, VAEncMiscParameterTypeHRD, &hrd, sizeof(hrd));
// numerator in the low 16 bits, denominator in the high 16 bits
VAEncMiscParameterFrameRate fr = { .framerate = (1u << 16) | engine->fps };
b.misc[b.misc_n++] = vaapi_create_misc_buffer(engine, VAEncMiscParameterTypeFrameRate, &fr, sizeof(fr));
}
if ((engine->is_hevc ? vaapi_hevc_params : vaapi_h264_params)(engine, is_idr, curr_recon, prev_recon, &b) != 0) goto done;
// 3. Render and Encode on AMD VCN hardware
VABufferID render_b[12];
int render_n = 0;
// FFmpeg's order: sequence, rate control misc, picture, packed headers (parameter sets, slice header), slice.
// With misc first, radeonsi (Mesa 26) ignored the VBR target: the 1M preset ran at 1.6 Mbps, 0.96 after.
if (b.seq != VA_INVALID_ID) render_b[render_n++] = b.seq;
for (int i = 0; i < b.misc_n; i++) {
if (b.misc[i] != VA_INVALID_ID) render_b[render_n++] = b.misc[i];
}
render_b[render_n++] = b.pic;
for (int i = 0; i < b.packed_n; i++) render_b[render_n++] = b.packed[i];
render_b[render_n++] = b.slice;
st = RT.vaBeginPicture(engine->va_dpy, engine->enc_ctx, engine->nv12_surf);
if (st != VA_STATUS_SUCCESS) goto done;
st = RT.vaRenderPicture(engine->va_dpy, engine->enc_ctx, render_b, render_n);
if (st != VA_STATUS_SUCCESS) goto done;
st = RT.vaEndPicture(engine->va_dpy, engine->enc_ctx);
if (st != VA_STATUS_SUCCESS) goto done;
st = RT.vaSyncSurface(engine->va_dpy, curr_recon);
if (st != VA_STATUS_SUCCESS) goto done;
// 4. Map Bitstream Output; an access unit may arrive as several linked segments
VACodedBufferSegment *segment = NULL;
st = RT.vaMapBuffer(engine->va_dpy, engine->coded_buf, (void**)&segment);
if (st != VA_STATUS_SUCCESS || !segment) goto done;
uint32_t total = 0;
for (VACodedBufferSegment *seg = segment; seg; seg = seg->next) total += seg->size;
if (total > 0 && !(segment->status & VA_CODED_BUF_STATUS_SLICE_OVERFLOW_MASK)) {
if (total > engine->output_staging_cap) {
engine->output_staging_cap = total + 64 * 1024;
engine->output_staging = (uint8_t*)realloc(engine->output_staging, engine->output_staging_cap);
}
uint32_t off = 0;
for (VACodedBufferSegment *seg = segment; seg; seg = seg->next) {
memcpy(engine->output_staging + off, seg->buf, seg->size);
off += seg->size;
}
*out_data = engine->output_staging;
*out_len = total;
}
RT.vaUnmapBuffer(engine->va_dpy, engine->coded_buf);
engine->frame_num = is_idr ? 1 : ((engine->frame_num + 1) & 15);
engine->since_idr = is_idr ? 1 : engine->since_idr + 1;
engine->frame_count++;
ret = 0;
done:
// No bitstream (failure, empty or slice overflow): the next frame_num / POC would skip, so restart with an IDR
engine->idr_pending = ret != 0 || *out_len == 0;
for (int i = 0; i < b.misc_n; i++) {
if (b.misc[i] != VA_INVALID_ID) RT.vaDestroyBuffer(engine->va_dpy, b.misc[i]);
}
if (b.seq != VA_INVALID_ID) RT.vaDestroyBuffer(engine->va_dpy, b.seq);
if (b.pic != VA_INVALID_ID) RT.vaDestroyBuffer(engine->va_dpy, b.pic);
if (b.slice != VA_INVALID_ID) RT.vaDestroyBuffer(engine->va_dpy, b.slice);
for (int i = 0; i < b.packed_n; i++) RT.vaDestroyBuffer(engine->va_dpy, b.packed[i]);
return ret;
}
void vaapi_destroy(VaapiEngine* engine) {
if (!engine) return;
if (engine->coded_buf != VA_INVALID_ID) RT.vaDestroyBuffer(engine->va_dpy, engine->coded_buf);
if (engine->enc_ctx != VA_INVALID_ID) RT.vaDestroyContext(engine->va_dpy, engine->enc_ctx);
if (engine->enc_cfg != VA_INVALID_ID) RT.vaDestroyConfig(engine->va_dpy, engine->enc_cfg);
if (engine->vpp_buf != VA_INVALID_ID) RT.vaDestroyBuffer(engine->va_dpy, engine->vpp_buf);
if (engine->vpp_ctx != VA_INVALID_ID) RT.vaDestroyContext(engine->va_dpy, engine->vpp_ctx);
if (engine->vpp_cfg != VA_INVALID_ID) RT.vaDestroyConfig(engine->va_dpy, engine->vpp_cfg);
if (engine->upload_ready) RT.vaDestroyImage(engine->va_dpy, engine->upload_img.image_id);
if (engine->in_rgb_surf != VA_INVALID_ID) RT.vaDestroySurfaces(engine->va_dpy, &engine->in_rgb_surf, 1);
if (engine->nv12_surf != VA_INVALID_ID) RT.vaDestroySurfaces(engine->va_dpy, &engine->nv12_surf, 1);
if (engine->recon_surfs[0] != VA_INVALID_ID || engine->recon_surfs[1] != VA_INVALID_ID) {
RT.vaDestroySurfaces(engine->va_dpy, engine->recon_surfs, 2);
}
if (engine->va_dpy) RT.vaTerminate(engine->va_dpy);
if (engine->drm_fd >= 0) close(engine->drm_fd);
if (engine->output_staging) free(engine->output_staging);
free(engine);
}
+51
View File
@@ -0,0 +1,51 @@
#ifndef UU_VAAPI_ENGINE_H
#define UU_VAAPI_ENGINE_H
#include <stdint.h>
#include <stddef.h>
#include "dmabuf_frame.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef struct VaapiEngine VaapiEngine;
typedef struct {
uint32_t width; // encode (output) size
uint32_t height;
uint32_t cap_width; // capture (input) size; VPP scales cap -> width
uint32_t cap_height;
uint32_t fps;
uint32_t gop;
int64_t target_bps;
int64_t max_bps; // VBR ceiling (viewer preset maxrate)
int64_t buffer_bits; // HRD buffer size
int is_hevc;
const char *device; // DRM render node (UU_VAAPI_DEVICE); NULL = /dev/dri/renderD128
} VaapiConfig;
VaapiEngine* vaapi_create(const VaapiConfig* config);
// Import a DRI3 / GBM DMA-BUF fd as the zero-copy input surface
int vaapi_import_dma_buffer(VaapiEngine* engine, int dma_fd, uint32_t stride);
int vaapi_import_frame(VaapiEngine* engine, const UuDmaFrame *frame);
// Host fallback: upload ARGB host memory if DMA-BUF is unavailable
int vaapi_upload_host_buffer(VaapiEngine* engine, const uint8_t* host_ptr, uint32_t pitch);
// Encode one frame
int vaapi_encode_frame(
VaapiEngine* engine,
int force_idr,
const uint8_t** out_data,
uint32_t* out_len
);
void vaapi_destroy(VaapiEngine* engine);
#ifdef __cplusplus
}
#endif
#endif // UU_VAAPI_ENGINE_H
+57 -65
View File
@@ -9,6 +9,8 @@
#include <stdlib.h>
#include <time.h>
#include <unistd.h>
#include "i18n.h"
#include "ui_theme.h"
#define QSIZE 64
static char queue[QSIZE][4096];
@@ -45,26 +47,17 @@ static gboolean toast_idle(gpointer d) { show_toast(d); g_free(d); return G_SOUR
void uu_tools_ui_toast(const char *text) { g_idle_add(toast_idle, g_strdup(text)); }
static gboolean on_delete(GtkWidget *w, GdkEvent *e, gpointer d) { (void)e; (void)d; gtk_widget_hide(w); atomic_store(&closed, 1); return TRUE; }
static const char *css =
"window { background: #f5f6f8; }\n"
".title { font-size: 22px; font-weight: bold; color: #111827; }\n"
".tag { background: #e5e7eb; color: #4b5563; border-radius: 6px; padding: 2px 8px; }\n"
".tag.remote { background: #d1fae5; color: #047857; }\n"
".card { background: white; border: 1px solid #e5e7eb; border-radius: 10px; padding: 8px; }\n"
".section { font-size: 17px; font-weight: bold; }\n"
".toast { background: rgba(17,24,39,0.88); color: white; border-radius: 8px; padding: 10px 18px; }\n"
".primary { background-image: none; background-color: #10b981; color: white; border: none; }\n"
".empty { color: #6b7280; font-size: 15px; }\n"
".online { color: #10b981; }\n";
static GtkWidget *frame(const char *title, GtkWidget **content) {
GtkCssProvider *p = gtk_css_provider_new(); gtk_css_provider_load_from_data(p, css, -1, NULL);
gtk_style_context_add_provider_for_screen(gdk_screen_get_default(), GTK_STYLE_PROVIDER(p), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION);
uu_theme_init();
uu_theme_load_css(".card { padding: 12px; } treeview.view { padding: 6px; }");
window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_window_set_title(GTK_WINDOW(window), title);
g_signal_connect(window, "delete-event", G_CALLBACK(on_delete), NULL);
GtkWidget *overlay = gtk_overlay_new(); *content = vbox(14);
gtk_container_set_border_width(GTK_CONTAINER(*content), 22);
GtkWidget *appearance = uu_theme_settings_button(GTK_WINDOW(window));
gtk_widget_set_halign(appearance, GTK_ALIGN_END);
gtk_box_pack_start(GTK_BOX(*content), appearance, FALSE, FALSE, 0);
gtk_container_add(GTK_CONTAINER(overlay), *content);
toast = label("", "toast"); gtk_widget_set_halign(toast, GTK_ALIGN_CENTER); gtk_widget_set_valign(toast, GTK_ALIGN_END);
gtk_widget_set_margin_bottom(toast, 30); gtk_widget_set_no_show_all(toast, TRUE);
@@ -97,9 +90,9 @@ static void format_size(guint64 size, int kind, char *out, size_t len) {
static void format_time(guint64 secs, char *out, size_t len) {
if (!secs) { snprintf(out, len, "--"); return; }
time_t t = (time_t)secs; struct tm tm; localtime_r(&t, &tm);
strftime(out, len, "%Y年%m月%d日", &tm);
strftime(out, len, L("%Y年%m月%d日", "%Y-%m-%d"), &tm);
}
static const char *kind_name(int kind) { return kind == 4 ? "文件" : kind == 3 ? "磁盘" : "文件夹"; }
static const char *kind_name(int kind) { return kind == 4 ? L("文件", "File") : kind == 3 ? L("磁盘", "Disk") : L("文件夹", "Folder"); }
/* ---------------- file transfer ---------------- */
enum { C_NAME, C_TIME, C_TYPE, C_SIZE, C_PATH, C_KIND, C_N };
@@ -111,7 +104,7 @@ static char local_dir[2048] = "", remote_dir[2048] = ":/";
static void load_local(const char *path) {
char *dir = g_strdup(path); /* path may alias local_dir */
GDir *d = g_dir_open(dir, 0, NULL);
if (!d) { show_toast("无法打开本机目录"); g_free(dir); return; }
if (!d) { show_toast(L("无法打开本机目录", "Cannot open local folder")); g_free(dir); return; }
snprintf(local_dir, sizeof local_dir, "%s", dir); g_free(dir);
gtk_entry_set_text(GTK_ENTRY(local_path), local_dir);
gtk_list_store_clear(local_store);
@@ -150,7 +143,7 @@ static void on_row_activated(GtkTreeView *view, GtkTreePath *path, GtkTreeViewCo
g_free(full);
}
static char *ask_name(const char *title) {
GtkWidget *dlg = gtk_dialog_new_with_buttons(title, GTK_WINDOW(window), GTK_DIALOG_MODAL, "取消", GTK_RESPONSE_CANCEL, "确定", GTK_RESPONSE_OK, NULL);
GtkWidget *dlg = gtk_dialog_new_with_buttons(title, GTK_WINDOW(window), GTK_DIALOG_MODAL, L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("确定", "OK"), GTK_RESPONSE_OK, NULL);
GtkWidget *entry = gtk_entry_new(); gtk_entry_set_activates_default(GTK_ENTRY(entry), TRUE);
gtk_dialog_set_default_response(GTK_DIALOG(dlg), GTK_RESPONSE_OK);
GtkWidget *area = gtk_dialog_get_content_area(GTK_DIALOG(dlg)); gtk_container_set_border_width(GTK_CONTAINER(area), 16);
@@ -158,21 +151,21 @@ static char *ask_name(const char *title) {
char *name = NULL;
if (gtk_dialog_run(GTK_DIALOG(dlg)) == GTK_RESPONSE_OK) {
const char *t = gtk_entry_get_text(GTK_ENTRY(entry));
if (*t && !strchr(t, '/') && strcmp(t, ".") && strcmp(t, "..")) name = g_strdup(t); else if (*t) show_toast("名称无效");
if (*t && !strchr(t, '/') && strcmp(t, ".") && strcmp(t, "..")) name = g_strdup(t); else if (*t) show_toast(L("名称无效", "Invalid name"));
}
gtk_widget_destroy(dlg);
return name;
}
static void on_local_mkdir(GtkButton *b, gpointer d) {
(void)b; (void)d; char *name = ask_name("新建文件夹"); if (!name) return;
(void)b; (void)d; char *name = ask_name(L("新建文件夹", "New folder")); if (!name) return;
char *full = g_build_filename(local_dir, name, NULL);
if (mkdir(full, 0755) != 0) show_toast("无法创建文件夹"); else load_local(local_dir);
if (mkdir(full, 0755) != 0) show_toast(L("无法创建文件夹", "Cannot create folder")); else load_local(local_dir);
g_free(full); g_free(name);
}
static void on_remote_mkdir(GtkButton *b, gpointer d) {
(void)b; (void)d;
if (!strcmp(remote_dir, ":/")) { show_toast("请先进入一个文件夹"); return; }
char *name = ask_name("新建文件夹"); if (!name) return;
if (!strcmp(remote_dir, ":/")) { show_toast(L("请先进入一个文件夹", "Open a folder first")); return; }
char *name = ask_name(L("新建文件夹", "New folder")); if (!name) return;
char *full = g_build_filename(remote_dir, name, NULL); char cmd[2200];
snprintf(cmd, sizeof cmd, "mkdir\t%s", full); push(cmd); g_free(full); g_free(name);
}
@@ -181,8 +174,8 @@ static void on_remote_mkdir(GtkButton *b, gpointer d) {
static void on_send(GtkButton *b, gpointer upload) {
(void)b; GtkTreeView *view = GTK_TREE_VIEW(upload ? local_view : remote_view);
GtkTreeModel *m; GList *rows = gtk_tree_selection_get_selected_rows(gtk_tree_view_get_selection(view), &m);
if (!rows) { show_toast("请先选择要发送的文件"); return; }
if (upload && !strcmp(remote_dir, ":/")) { show_toast("请先在远端进入目标文件夹"); g_list_free_full(rows, (GDestroyNotify)gtk_tree_path_free); return; }
if (!rows) { show_toast(L("请先选择要发送的文件", "Select the files to send first")); return; }
if (upload && !strcmp(remote_dir, ":/")) { show_toast(L("请先在远端进入目标文件夹", "Open the destination folder on the remote side first")); g_list_free_full(rows, (GDestroyNotify)gtk_tree_path_free); return; }
int skipped = 0;
for (GList *r = rows; r; r = r->next) {
GtkTreeIter it; char *full, *name; int kind;
@@ -199,7 +192,7 @@ static void on_send(GtkButton *b, gpointer upload) {
g_free(full); g_free(name);
}
g_list_free_full(rows, (GDestroyNotify)gtk_tree_path_free);
if (skipped) show_toast(upload ? "暂不支持上传文件夹,已跳过" : "不能下载整个磁盘,已跳过");
if (skipped) show_toast(upload ? L("暂不支持上传文件夹,已跳过", "Uploading folders is not supported yet; skipped") : L("不能下载整个磁盘,已跳过", "Cannot download a whole disk; skipped"));
}
static void on_cancel_all(GtkButton *b, gpointer d) { (void)b; (void)d; push("cancel"); }
static void on_clear_done(GtkButton *b, gpointer d) {
@@ -209,13 +202,13 @@ static void on_clear_done(GtkButton *b, gpointer d) {
}
static GtkWidget *pane(int remote) {
GtkWidget *card = vbox(6); add_class(card, "card");
GtkWidget *bar = hbox(6), *up = button("↑", NULL), *refresh = button("刷新", NULL), *mk = button("新建文件夹", NULL), *path = gtk_entry_new();
gtk_widget_set_tooltip_text(up, "上一级"); gtk_widget_set_tooltip_text(refresh, "刷新");
GtkWidget *bar = hbox(6), *up = button("↑", NULL), *refresh = button(L("刷新", "Refresh"), NULL), *mk = button(L("新建文件夹", "New folder"), NULL), *path = gtk_entry_new();
gtk_widget_set_tooltip_text(up, L("上一级", "Up")); gtk_widget_set_tooltip_text(refresh, L("刷新", "Refresh"));
gtk_box_pack_start(GTK_BOX(bar), up, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(bar), refresh, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(bar), mk, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(bar), path, TRUE, TRUE, 0);
GtkListStore *store = gtk_list_store_new(C_N, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_INT);
GtkWidget *view = gtk_tree_view_new_with_model(GTK_TREE_MODEL(store));
add_column(view, "名称", C_NAME, 1); add_column(view, "修改日期", C_TIME, 0); add_column(view, "类型", C_TYPE, 0); add_column(view, "大小", C_SIZE, 0);
add_column(view, L("名称", "Name"), C_NAME, 1); add_column(view, L("修改日期", "Date modified"), C_TIME, 0); add_column(view, L("类型", "Type"), C_TYPE, 0); add_column(view, L("大小", "Size"), C_SIZE, 0);
gtk_tree_selection_set_mode(gtk_tree_view_get_selection(GTK_TREE_VIEW(view)), GTK_SELECTION_MULTIPLE);
g_signal_connect(view, "row-activated", G_CALLBACK(on_row_activated), GINT_TO_POINTER(remote));
g_signal_connect(up, "clicked", G_CALLBACK(remote ? on_remote_up : on_local_up), NULL);
@@ -229,13 +222,13 @@ static GtkWidget *pane(int remote) {
return card;
}
static void build_files(void) {
GtkWidget *content; frame("文件传输", &content);
GtkWidget *content; frame(L("文件传输", "File transfer"), &content);
gtk_window_set_default_size(GTK_WINDOW(window), 1100, 760);
GtkWidget *head = gtk_grid_new(); gtk_grid_set_column_homogeneous(GTK_GRID(head), TRUE); gtk_grid_set_column_spacing(GTK_GRID(head), 24);
GtkWidget *left = hbox(10), *right = hbox(10);
char host[256]; if (gethostname(host, sizeof host) != 0) snprintf(host, sizeof host, "本机"); host[sizeof host - 1] = 0;
GtkWidget *tag_l = label("本机", "tag"), *tag_r = label("远端", "tag"); add_class(tag_r, "remote");
GtkWidget *send_r = button("发送 →", NULL), *send_l = button("← 发送", NULL);
char host[256]; if (gethostname(host, sizeof host) != 0) snprintf(host, sizeof host, L("本机", "This device")); host[sizeof host - 1] = 0;
GtkWidget *tag_l = label(L("本机", "This device"), "tag"), *tag_r = label(L("远端", "Remote"), "tag"); add_class(tag_r, "remote");
GtkWidget *send_r = button(L("发送 →", "Send →"), NULL), *send_l = button(L("← 发送", "← Send"), NULL);
g_signal_connect(send_r, "clicked", G_CALLBACK(on_send), GINT_TO_POINTER(1));
g_signal_connect(send_l, "clicked", G_CALLBACK(on_send), NULL);
gtk_box_pack_start(GTK_BOX(left), label(host, "title"), FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(left), tag_l, FALSE, FALSE, 0);
@@ -247,25 +240,25 @@ static void build_files(void) {
gtk_grid_set_row_spacing(GTK_GRID(head), 14);
gtk_box_pack_start(GTK_BOX(content), head, TRUE, TRUE, 0);
GtkWidget *tasks = vbox(8); add_class(tasks, "card");
GtkWidget *tbar = hbox(8), *cancel = button("全部取消", NULL), *clear = button("清除完结任务", NULL);
GtkWidget *tbar = hbox(8), *cancel = button(L("全部取消", "Cancel all"), NULL), *clear = button(L("清除完结任务", "Clear finished"), NULL);
g_signal_connect(cancel, "clicked", G_CALLBACK(on_cancel_all), NULL); g_signal_connect(clear, "clicked", G_CALLBACK(on_clear_done), NULL);
gtk_box_pack_start(GTK_BOX(tbar), label("传输列表", "section"), FALSE, FALSE, 4);
gtk_box_pack_start(GTK_BOX(tbar), label(L("传输列表", "Transfers"), "section"), FALSE, FALSE, 4);
gtk_box_pack_end(GTK_BOX(tbar), clear, FALSE, FALSE, 0); gtk_box_pack_end(GTK_BOX(tbar), cancel, FALSE, FALSE, 0);
task_store = gtk_list_store_new(T_N, G_TYPE_INT, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_INT);
GtkWidget *tview = gtk_tree_view_new_with_model(GTK_TREE_MODEL(task_store));
add_column(tview, "名称", T_NAME, 1); add_column(tview, "状态", T_STATUS, 0); add_column(tview, "大小", T_SIZE, 0);
add_column(tview, "发送路径", T_FROM, 1); add_column(tview, "接收路径", T_TO, 1);
add_column(tview, L("名称", "Name"), T_NAME, 1); add_column(tview, L("状态", "Status"), T_STATUS, 0); add_column(tview, L("大小", "Size"), T_SIZE, 0);
add_column(tview, L("发送路径", "From"), T_FROM, 1); add_column(tview, L("接收路径", "To"), T_TO, 1);
gtk_box_pack_start(GTK_BOX(tasks), tbar, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(tasks), scrolled(tview, 180), TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(content), tasks, TRUE, TRUE, 0);
const char *home = g_get_home_dir(); load_local(home ? home : "/");
gtk_entry_set_text(GTK_ENTRY(remote_path), "此电脑");
gtk_entry_set_text(GTK_ENTRY(remote_path), L("此电脑", "This PC"));
}
struct listing { char *path; char *rows; };
static gboolean remote_idle(gpointer d) {
struct listing *l = d;
snprintf(remote_dir, sizeof remote_dir, "%s", l->path);
gtk_entry_set_text(GTK_ENTRY(remote_path), strcmp(remote_dir, ":/") ? remote_dir : "此电脑");
gtk_entry_set_text(GTK_ENTRY(remote_path), strcmp(remote_dir, ":/") ? remote_dir : L("此电脑", "This PC"));
gtk_list_store_clear(remote_store);
char **lines = g_strsplit(l->rows, "\n", -1);
for (char **line = lines; *line; line++) {
@@ -312,10 +305,10 @@ static GtkListStore *rule_store;
static GtkWidget *rule_stack;
static void on_add_rule(GtkButton *b, gpointer d) {
(void)b; (void)d;
GtkWidget *dlg = gtk_dialog_new_with_buttons("添加映射规则", GTK_WINDOW(window), GTK_DIALOG_MODAL, "取消", GTK_RESPONSE_CANCEL, "保存后立即启用", GTK_RESPONSE_OK, NULL);
GtkWidget *dlg = gtk_dialog_new_with_buttons(L("添加映射规则", "Add mapping rule"), GTK_WINDOW(window), GTK_DIALOG_MODAL, L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("保存后立即启用", "Save and enable"), GTK_RESPONSE_OK, NULL);
GtkWidget *grid = gtk_grid_new(); gtk_grid_set_row_spacing(GTK_GRID(grid), 12); gtk_grid_set_column_spacing(GTK_GRID(grid), 24);
gtk_container_set_border_width(GTK_CONTAINER(grid), 20);
const char *labels[] = {"名称", "本地端口", "目标地址", "目标端口"}, *hints[] = {"名称", "请输入端口", "", "请输入端口"};
const char *labels[] = {L("名称", "Name"), L("本地端口", "Local port"), L("目标地址", "Target address"), L("目标端口", "Target port")}, *hints[] = {L("名称", "Name"), L("请输入端口", "Enter port"), "", L("请输入端口", "Enter port")};
GtkWidget *entries[4];
for (int i = 0; i < 4; i++) {
entries[i] = gtk_entry_new(); gtk_entry_set_placeholder_text(GTK_ENTRY(entries[i]), hints[i]); gtk_widget_set_hexpand(entries[i], TRUE);
@@ -328,7 +321,7 @@ static void on_add_rule(GtkButton *b, gpointer d) {
const char *name = gtk_entry_get_text(GTK_ENTRY(entries[0])), *host = gtk_entry_get_text(GTK_ENTRY(entries[2]));
char *end; long local = strtol(gtk_entry_get_text(GTK_ENTRY(entries[1])), &end, 10); int bad_local = *end || local < 0 || local > 65535;
long port = strtol(gtk_entry_get_text(GTK_ENTRY(entries[3])), &end, 10); int bad_port = *end || port < 1 || port > 65535;
if (!*name || strchr(name, '\t') || !*host || strchr(host, '\t') || bad_local || bad_port) { show_toast("请填写名称、有效端口和目标地址"); continue; }
if (!*name || strchr(name, '\t') || !*host || strchr(host, '\t') || bad_local || bad_port) { show_toast(L("请填写名称、有效端口和目标地址", "Enter a name, valid ports and a target address")); continue; }
char cmd[1024]; snprintf(cmd, sizeof cmd, "add\t%s\t%ld\t%s\t%ld", name, local, host, port); push(cmd);
break;
}
@@ -336,27 +329,27 @@ static void on_add_rule(GtkButton *b, gpointer d) {
}
static void on_remove_rule(GtkButton *b, gpointer view) {
(void)b; GtkTreeModel *m; GtkTreeIter it;
if (!gtk_tree_selection_get_selected(gtk_tree_view_get_selection(view), &m, &it)) { show_toast("请先选择一条规则"); return; }
if (!gtk_tree_selection_get_selected(gtk_tree_view_get_selection(view), &m, &it)) { show_toast(L("请先选择一条规则", "Select a rule first")); return; }
int id; gtk_tree_model_get(m, &it, P_ID, &id, -1); char cmd[64]; snprintf(cmd, sizeof cmd, "remove\t%d", id); push(cmd);
}
static void build_portmap(void) {
GtkWidget *content; frame("端口映射", &content);
GtkWidget *content; frame(L("端口映射", "Port mapping"), &content);
gtk_window_set_default_size(GTK_WINDOW(window), 820, 560);
GtkWidget *head = hbox(12), *add = button("添加规则", "primary"), *del = button("删除", NULL);
GtkWidget *dot = label("● 已连接", "online");
GtkWidget *head = hbox(12), *add = button(L("添加规则", "Add rule"), "primary"), *del = button(L("删除", "Remove"), NULL);
GtkWidget *dot = label(L("● 已连接", "● Connected"), "online");
gtk_box_pack_start(GTK_BOX(head), label(remote_name, "title"), FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(head), dot, FALSE, FALSE, 0);
gtk_box_pack_end(GTK_BOX(head), add, FALSE, FALSE, 0); gtk_box_pack_end(GTK_BOX(head), del, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(content), head, FALSE, FALSE, 0);
rule_store = gtk_list_store_new(P_N, G_TYPE_INT, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING);
GtkWidget *view = gtk_tree_view_new_with_model(GTK_TREE_MODEL(rule_store));
add_column(view, "名称", P_NAME, 1); add_column(view, "本地地址", P_LOCAL, 0); add_column(view, "目标地址", P_TARGET, 1); add_column(view, "状态", P_STATUS, 0);
add_column(view, L("名称", "Name"), P_NAME, 1); add_column(view, L("本地地址", "Local address"), P_LOCAL, 0); add_column(view, L("目标地址", "Target address"), P_TARGET, 1); add_column(view, L("状态", "Status"), P_STATUS, 0);
rule_stack = gtk_stack_new();
GtkWidget *empty = label("当前没有端口映射规则,点击「添加规则」把远端端口映射到本机", "empty"); gtk_widget_set_halign(empty, GTK_ALIGN_CENTER);
GtkWidget *empty = label(L("当前没有端口映射规则,点击「添加规则」把远端端口映射到本机", "No port mapping rules. Click \"Add rule\" to map a remote port to this computer"), "empty"); gtk_widget_set_halign(empty, GTK_ALIGN_CENTER);
gtk_stack_add_named(GTK_STACK(rule_stack), empty, "empty");
gtk_stack_add_named(GTK_STACK(rule_stack), scrolled(view, 360), "list");
GtkWidget *card = vbox(0); add_class(card, "card"); gtk_box_pack_start(GTK_BOX(card), rule_stack, TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(content), card, TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(content), label("本地端口只监听 127.0.0.1;本地端口填 0 时自动分配。", "empty"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(content), label(L("本地端口只监听 127.0.0.1;本地端口填 0 时自动分配。", "Local ports listen on 127.0.0.1 only; enter 0 to pick a free port."), "empty"), FALSE, FALSE, 0);
g_signal_connect(add, "clicked", G_CALLBACK(on_add_rule), NULL);
g_signal_connect(del, "clicked", G_CALLBACK(on_remove_rule), view);
}
@@ -394,36 +387,36 @@ static void on_open_session(GtkTreeView *v, GtkTreePath *path, GtkTreeViewColumn
}
static void on_kill_session(GtkButton *b, gpointer d) {
(void)b; (void)d; guint id = selected_session();
if (!id) { show_toast("请先选择一个会话"); return; }
if (!id) { show_toast(L("请先选择一个会话", "Select a session first")); return; }
GtkWidget *dlg = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT,
GTK_MESSAGE_WARNING, GTK_BUTTONS_NONE, "确定结束会话 %u?", id);
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(dlg), "会话内正在运行的程序将被终止。");
gtk_dialog_add_buttons(GTK_DIALOG(dlg), "取消", GTK_RESPONSE_CANCEL, "结束会话", GTK_RESPONSE_OK, NULL);
GTK_MESSAGE_WARNING, GTK_BUTTONS_NONE, L("确定结束会话 %u?", "End session %u?"), id);
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(dlg), L("会话内正在运行的程序将被终止。", "Programs running in the session will be terminated."));
gtk_dialog_add_buttons(GTK_DIALOG(dlg), L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("结束会话", "End session"), GTK_RESPONSE_OK, NULL);
gtk_dialog_set_default_response(GTK_DIALOG(dlg), GTK_RESPONSE_CANCEL);
if (gtk_dialog_run(GTK_DIALOG(dlg)) == GTK_RESPONSE_OK) { char cmd[64]; snprintf(cmd, sizeof cmd, "kill\t%u", id); push(cmd); }
gtk_widget_destroy(dlg);
}
static void build_terminal(void) {
GtkWidget *content; frame("终端远控", &content); gtk_window_set_default_size(GTK_WINDOW(window), 820, 560);
GtkWidget *head = hbox(12); session_dot = label("● 正在读取会话", "online");
session_create = button("创建会话", "primary"); session_kill = button("结束会话", NULL);
GtkWidget *content; frame(L("终端远控", "Remote terminal"), &content); gtk_window_set_default_size(GTK_WINDOW(window), 820, 560);
GtkWidget *head = hbox(12); session_dot = label(L("● 正在读取会话", "● Loading sessions"), "online");
session_create = button(L("创建会话", "New session"), "primary"); session_kill = button(L("结束会话", "End session"), NULL);
gtk_box_pack_start(GTK_BOX(head), label(remote_name, "title"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(head), session_dot, FALSE, FALSE, 0);
gtk_box_pack_end(GTK_BOX(head), session_create, FALSE, FALSE, 0); gtk_box_pack_end(GTK_BOX(head), session_kill, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(content), head, FALSE, FALSE, 0);
session_store = gtk_list_store_new(S_N, G_TYPE_UINT, G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING);
session_view = gtk_tree_view_new_with_model(GTK_TREE_MODEL(session_store));
add_column(session_view, "会话 ID", S_ID, 0); add_column(session_view, "Shell", S_SHELL, 1);
add_column(session_view, "创建时间", S_TIME, 0); add_column(session_view, "状态", S_STATE, 0);
add_column(session_view, L("会话 ID", "Session ID"), S_ID, 0); add_column(session_view, "Shell", S_SHELL, 1);
add_column(session_view, L("创建时间", "Created"), S_TIME, 0); add_column(session_view, L("状态", "Status"), S_STATE, 0);
session_stack = gtk_stack_new();
GtkWidget *empty = label("当前无正在运行的终端会话", "empty"); gtk_widget_set_halign(empty, GTK_ALIGN_CENTER);
GtkWidget *empty = label(L("当前无正在运行的终端会话", "No running terminal sessions"), "empty"); gtk_widget_set_halign(empty, GTK_ALIGN_CENTER);
gtk_stack_add_named(GTK_STACK(session_stack), empty, "empty");
gtk_stack_add_named(GTK_STACK(session_stack), label("正在读取会话…", "empty"), "loading");
gtk_stack_add_named(GTK_STACK(session_stack), label("连接已断开,请关闭窗口后重试", "empty"), "offline");
gtk_stack_add_named(GTK_STACK(session_stack), label(L("正在读取会话…", "Loading sessions…"), "empty"), "loading");
gtk_stack_add_named(GTK_STACK(session_stack), label(L("连接已断开,请关闭窗口后重试", "Disconnected. Close the window and try again"), "empty"), "offline");
gtk_stack_add_named(GTK_STACK(session_stack), scrolled(session_view, 360), "list");
gtk_stack_set_visible_child_name(GTK_STACK(session_stack), "loading");
gtk_box_pack_start(GTK_BOX(content), session_stack, TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(content), label("双击接回会话;创建会话将在本机终端程序中打开。", "empty"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(content), label(L("双击接回会话;创建会话将在本机终端程序中打开。", "Double-click to reattach; new sessions open in a local terminal."), "empty"), FALSE, FALSE, 0);
gtk_widget_set_sensitive(session_create, FALSE); gtk_widget_set_sensitive(session_kill, FALSE);
g_signal_connect(session_create, "clicked", G_CALLBACK(on_create_session), NULL);
g_signal_connect(session_kill, "clicked", G_CALLBACK(on_kill_session), NULL);
@@ -449,7 +442,7 @@ static gboolean sessions_idle(gpointer d) {
g_strfreev(f);
}
g_strfreev(lines);
gtk_label_set_text(GTK_LABEL(session_dot), s->connected ? "● 已连接" : "● 已断开");
gtk_label_set_text(GTK_LABEL(session_dot), s->connected ? L("● 已连接", "● Connected") : L("● 已断开", "● Disconnected"));
gtk_widget_set_sensitive(session_create, s->connected); gtk_widget_set_sensitive(session_kill, s->connected);
gtk_widget_set_sensitive(session_view, s->connected);
gtk_stack_set_visible_child_name(GTK_STACK(session_stack), s->connected ? (n ? "list" : "empty") : "offline");
@@ -474,8 +467,7 @@ static gboolean show_window(gpointer d) {
static void *ui_thread(void *d) {
(void)d;
if (!gtk_init_check(NULL, NULL)) { pthread_mutex_lock(&init_lock); init_state = -1; pthread_cond_signal(&init_cond); pthread_mutex_unlock(&init_lock); return NULL; }
// Light palette in CSS; keep a dark system theme from making unstyled text white on white (#43).
g_object_set(gtk_settings_get_default(), "gtk-theme-name", "Adwaita", "gtk-application-prefer-dark-theme", FALSE, NULL);
gtk_window_set_default_icon_name("uu-remote-linux"); // same taskbar icon as the host (#13)
show_window(NULL); gtk_main(); return NULL;
}
/* Hidden windows retain their widgets so queued idle callbacks stay valid. */
+224 -160
View File
@@ -9,47 +9,36 @@
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <sys/stat.h>
#include "i18n.h"
#include "ui_theme.h"
static const char *CSS =
"window { background-color: #ffffff; }\n"
"* { font-family: 'Noto Sans CJK SC', 'Noto Sans SC', sans-serif; }\n"
".sidebar { background-color: #e9e9ec; }\n"
".section { font-size: 16px; font-weight: 600; color: #1d1d1f; }\n"
".sidebar { background-color: @theme_bg_color; border-right: 1px solid @uu_border; }\n"
".sidebar list, .sidebar row { background-color: transparent; }\n"
".sidebar row { border-radius: 8px; margin: 1px 10px; padding: 8px 10px; }\n"
".sidebar row:selected { background-color: #d4d4d9; color: #1d1d1f; }\n"
".devname { font-size: 15px; color: #1d1d1f; }\n"
".offline { color: #9ca3af; }\n"
".dot { color: #22c55e; font-size: 10px; }\n"
".sidebar row { border-radius: 8px; margin: 3px 12px; padding: 10px 12px; }\n"
".sidebar row:hover { background-color: @uu_tint; }\n"
".sidebar row:selected { background-color: @uu_tint; color: @uu_fg; }\n"
".devname { font-size: 15px; color: @uu_fg; }\n"
".offline { color: @uu_muted; }\n"
".dot { font-size: 10px; }\n"
".dot.off { color: transparent; }\n"
".icon { background-color: #2f7bff; color: #ffffff; border-radius: 6px; font-size: 11px; font-weight: 700; padding: 2px 5px; }\n"
".icon.off { background-color: #c4c7cf; }\n"
".tag { background-color: #e8f0ff; color: #2f6bff; border-radius: 4px; font-size: 12px; padding: 1px 6px; }\n"
".title { font-size: 20px; font-weight: 700; color: #1d1d1f; }\n"
".header { border-bottom: 1px solid #e5e7eb; padding: 12px 22px; background-color: #f7f7f8; }\n"
".badge { background-color: #1d1d1f; color: #ffffff; border-radius: 12px; padding: 3px 12px; font-size: 13px; }\n"
".badge.off { background-color: #9ca3af; }\n"
".hbtn { background-image: none; background-color: transparent; border: none; font-size: 17px; color: #4b5563; padding: 4px 10px; }\n"
".preview { background-image: linear-gradient(135deg, #a8c0ff 0%, #e2c2f2 50%, #f6c8a8 100%); border-radius: 12px 12px 0 0; }\n"
".enter { background-image: none; background-color: rgba(0,0,0,0.18); color: #ffffff; border: none; font-size: 19px; padding: 8px 20px; border-radius: 8px; }\n"
".toolbar { border: 1px solid #e5e7eb; border-top: none; border-radius: 0 0 12px 12px; padding: 4px; }\n"
".tool { background-image: none; background-color: transparent; border: none; font-size: 15px; color: #374151; padding: 10px; }\n"
".dashed { border: 1px dashed #d1d5db; border-radius: 12px; padding: 36px; }\n"
".round { background-image: none; background-color: #f3f4f6; border: none; border-radius: 40px; font-size: 26px; min-width: 64px; min-height: 64px; }\n"
".card { background-color: #fafafa; border: 1px solid #e5e7eb; border-radius: 10px; padding: 14px 18px; }\n"
".cardbtn { background-image: none; background-color: #fafafa; border: 1px solid #e5e7eb; border-radius: 10px; padding: 12px 16px; }\n"
".banner { background-color: #f7f8fa; border: 1px solid #e5e7eb; border-radius: 10px; padding: 14px 18px; }\n"
".group { font-size: 16px; font-weight: 600; color: #1d1d1f; }\n"
".h2 { font-size: 19px; font-weight: 700; color: #1d1d1f; }\n"
".big { font-size: 30px; font-weight: 800; color: #111111; }\n"
".hint { font-size: 14px; color: #6b7280; }\n"
".primary { background-image: none; background-color: #3b82f6; color: #ffffff; border: none; border-radius: 8px; font-size: 16px; padding: 8px 26px; }\n"
".secondary { background-image: none; background-color: #ffffff; border: 1px solid #d1d5db; border-radius: 8px; padding: 6px 16px; }\n"
".qrbox { background-color: #ffffff; border-radius: 12px; border: 1px solid #e5e7eb; padding: 14px; }\n"
".status { font-size: 13px; color: #2f6bff; }\n"
".toast { background-color: #ffffff; border: 1px solid #e5e7eb; border-radius: 10px; padding: 10px 18px; font-size: 15px; }\n";
".icon { background-color: @uu_accent; color: @uu_accent_fg; border-radius: 6px; font-size: 11px; font-weight: 700; padding: 3px 6px; }\n"
".icon.off { background-color: @uu_border; color: @uu_muted; }\n"
".header { border-bottom: 1px solid @uu_border; padding: 16px 24px; }\n"
".badge { background-color: @uu_tint; color: @uu_success; border-radius: 8px; padding: 4px 10px; font-size: 13px; }\n"
".badge.off { background-color: @theme_bg_color; color: @uu_muted; }\n"
".hbtn { font-size: 17px; padding: 6px 10px; }\n"
".preview { background-image: none; background-color: @uu_tint; border-radius: 12px 12px 0 0; }\n"
".enter { font-size: 18px; }\n"
".toolbar { background-color: @uu_surface; border: 1px solid @uu_border; border-top: none; border-radius: 0 0 12px 12px; padding: 6px; }\n"
".tool { font-size: 15px; padding: 10px; }\n"
".dashed { border: 1px dashed @uu_border; border-radius: 12px; padding: 36px; }\n"
".round { background-color: @uu_tint; border: none; border-radius: 16px; font-size: 26px; min-width: 64px; min-height: 64px; }\n"
".card, .banner { padding: 18px 20px; }\n"
".cardbtn { padding: 14px 18px; }\n";
typedef struct { char id[64]; char name[128]; int platform, online, current; } Device;
typedef struct { char id[64]; char name[128]; int platform, online, current; char thumb[512]; } Device;
static Device devices[64];
static int device_count;
static char queue[16][200];
@@ -93,7 +82,7 @@ static GtkWidget *platform_icon(int platform, int online) {
}
static gboolean hide_toast(gpointer d) { (void)d; gtk_widget_hide(toast); return G_SOURCE_REMOVE; }
static void show_toast(const char *text) { gtk_label_set_text(GTK_LABEL(toast), text); gtk_widget_show(toast); g_timeout_add(3500, hide_toast, NULL); }
static void unsupported(GtkButton *b, gpointer what) { (void)b; char t[128]; snprintf(t, sizeof t, "%s:暂未支持", (const char *)what); show_toast(t); }
static void unsupported(GtkButton *b, gpointer what) { (void)b; char t[128]; snprintf(t, sizeof t, L("%s:暂未支持", "%s: not supported yet"), (const char *)what); show_toast(t); }
static void connect_kind(const char *kind) {
if (selected < 0) return;
@@ -102,7 +91,7 @@ static void connect_kind(const char *kind) {
snprintf(cmd, sizeof cmd, "connect\t%s\t%s", devices[selected].id, kind);
pthread_mutex_unlock(&d_lock);
push(cmd);
if (!strcmp(kind, "desktop") || !strcmp(kind, "watch")) show_toast("正在连接…");
if (!strcmp(kind, "desktop") || !strcmp(kind, "watch")) show_toast(L("正在连接…", "Connecting…"));
}
static void on_tool(GtkButton *b, gpointer kind);
static void more_item(GtkButton *b, gpointer kind) {
@@ -110,32 +99,32 @@ static void more_item(GtkButton *b, gpointer kind) {
const char *k = kind;
if (!strcmp(k, "reboot") || !strcmp(k, "shutdown")) {
GtkWidget *d = gtk_message_dialog_new(GTK_WINDOW(dialog), GTK_DIALOG_MODAL, GTK_MESSAGE_WARNING, GTK_BUTTONS_NONE,
!strcmp(k, "reboot") ? "确定要重启被控电脑吗?" : "确定要关闭被控电脑吗?");
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(d), "远程会话会断开。");
gtk_dialog_add_buttons(GTK_DIALOG(d), "取消", GTK_RESPONSE_CANCEL, "确认", GTK_RESPONSE_OK, NULL);
!strcmp(k, "reboot") ? L("确定要重启被控电脑吗?", "Restart the remote computer?") : L("确定要关闭被控电脑吗?", "Shut down the remote computer?"));
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(d), L("远程会话会断开。", "The remote session will be disconnected."));
gtk_dialog_add_buttons(GTK_DIALOG(d), L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("确认", "Confirm"), GTK_RESPONSE_OK, NULL);
int ok = gtk_dialog_run(GTK_DIALOG(d)) == GTK_RESPONSE_OK; gtk_widget_destroy(d);
if (ok) { connect_kind(k); show_toast("正在发送电源指令…"); }
if (ok) { connect_kind(k); show_toast(L("正在发送电源指令…", "Sending power command…")); }
return;
}
if (!strcmp(k, "unbind")) {
GtkWidget *d = gtk_message_dialog_new(GTK_WINDOW(dialog), GTK_DIALOG_MODAL, GTK_MESSAGE_WARNING, GTK_BUTTONS_NONE,
"确定要从账号中删除该设备吗?");
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(d), "删除后需要在该设备上重新登录才能再次远控。");
gtk_dialog_add_buttons(GTK_DIALOG(d), "取消", GTK_RESPONSE_CANCEL, "删除", GTK_RESPONSE_OK, NULL);
L("确定要从账号中删除该设备吗?", "Remove this device from your account?"));
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(d), L("删除后需要在该设备上重新登录才能再次远控。", "After removal you must sign in on that device again before you can control it."));
gtk_dialog_add_buttons(GTK_DIALOG(d), L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("删除", "Remove"), GTK_RESPONSE_OK, NULL);
int ok = gtk_dialog_run(GTK_DIALOG(d)) == GTK_RESPONSE_OK; gtk_widget_destroy(d);
if (ok) { gtk_widget_destroy(dialog); connect_kind(k); show_toast("正在删除设备…"); }
if (ok) { gtk_widget_destroy(dialog); connect_kind(k); show_toast(L("正在删除设备…", "Removing device…")); }
return;
}
gtk_widget_destroy(dialog);
on_tool(NULL, kind);
}
static void open_more(void) {
GtkWidget *dialog = gtk_dialog_new_with_buttons("更多工具", GTK_WINDOW(window), GTK_DIALOG_MODAL, NULL, NULL);
GtkWidget *dialog = gtk_dialog_new_with_buttons(L("更多工具", "More tools"), GTK_WINDOW(window), GTK_DIALOG_MODAL, NULL, NULL);
gtk_window_set_default_size(GTK_WINDOW(dialog), 520, -1);
GtkWidget *area = gtk_dialog_get_content_area(GTK_DIALOG(dialog)), *box = vbox(10);
gtk_container_set_border_width(GTK_CONTAINER(box), 22);
gtk_box_pack_start(GTK_BOX(box), label("更多工具", "h2"), FALSE, FALSE, 6);
const char *names[] = {"🗂 文件传输", "▶ 观看模式", "⌨ 终端", "⇄ 端口映射", "⏻ 远程开机", "↻ 重启", "⏻ 关机", "🗑 删除设备"};
gtk_box_pack_start(GTK_BOX(box), label(L("更多工具", "More tools"), "h2"), FALSE, FALSE, 6);
const char *names[] = {L("🗂 文件传输", "🗂 File transfer"), L("▶ 观看模式", "▶ Watch mode"), L("⌨ 终端", "⌨ Terminal"), L("⇄ 端口映射", "⇄ Port mapping"), L("⏻ 远程开机", "⏻ Wake on LAN"), L("↻ 重启", "↻ Restart"), L("⏻ 关机", "⏻ Shut down"), L("🗑 删除设备", "🗑 Remove device")};
const char *kinds[] = {"file", "watch", "terminal", "portmap", "wol", "reboot", "shutdown", "unbind"};
for (int i = 0; i < 8; i++) {
GtkWidget *b = gtk_button_new(), *line = hbox(10); add_class(b, "cardbtn");
@@ -146,8 +135,8 @@ static void open_more(void) {
else g_signal_connect(b, "clicked", G_CALLBACK(more_item), (gpointer)kinds[i]);
gtk_box_pack_start(GTK_BOX(box), b, FALSE, FALSE, 0);
}
GtkWidget *foot = hbox(10), *order = button("调整顺序", "secondary"), *close = button("关闭", "secondary");
g_signal_connect(order, "clicked", G_CALLBACK(unsupported), "调整顺序");
GtkWidget *foot = hbox(10), *order = button(L("调整顺序", "Reorder"), "secondary"), *close = button(L("关闭", "Close"), "secondary");
g_signal_connect(order, "clicked", G_CALLBACK(unsupported), L("调整顺序", "Reorder"));
g_signal_connect_swapped(close, "clicked", G_CALLBACK(gtk_widget_destroy), dialog);
gtk_box_pack_start(GTK_BOX(foot), order, FALSE, FALSE, 0); gtk_box_pack_end(GTK_BOX(foot), close, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(box), gtk_separator_new(GTK_ORIENTATION_HORIZONTAL), FALSE, FALSE, 8);
@@ -159,10 +148,10 @@ static void on_tool(GtkButton *b, gpointer kind) {
(void)b;
if (!strcmp(kind, "more")) open_more();
else if (!strcmp(kind, "wol") || !strcmp(kind, "reboot") || !strcmp(kind, "shutdown"))
unsupported(NULL, (gpointer)(!strcmp(kind, "wol") ? "远程开机" : !strcmp(kind, "reboot") ? "重启" : "关机"));
unsupported(NULL, (gpointer)(!strcmp(kind, "wol") ? L("远程开机", "Wake on LAN") : !strcmp(kind, "reboot") ? L("重启", "Restart") : L("关机", "Shut down")));
else connect_kind(kind);
}
static void on_login(GtkButton *b, gpointer d) { (void)b; (void)d; push("login"); gtk_stack_set_visible_child_name(GTK_STACK(stack), "login"); gtk_label_set_text(GTK_LABEL(title_label), "登录"); }
static void on_login(GtkButton *b, gpointer d) { (void)b; (void)d; push("login"); gtk_stack_set_visible_child_name(GTK_STACK(stack), "login"); gtk_label_set_text(GTK_LABEL(title_label), L("登录", "Sign in")); }
static void set_header(const char *title, int device_page) {
gtk_label_set_text(GTK_LABEL(title_label), title);
@@ -170,19 +159,52 @@ static void set_header(const char *title, int device_page) {
}
static void show_page(const char *name, const char *title) {
int need_login = strcmp(name, "assist") && strcmp(name, "login");
if (!logged_in && need_login) { set_header("全部设备", 0); gtk_stack_set_visible_child_name(GTK_STACK(stack), "welcome"); return; }
if (!logged_in && need_login) { set_header(L("全部设备", "All devices"), 0); gtk_stack_set_visible_child_name(GTK_STACK(stack), "welcome"); return; }
set_header(title, 0);
gtk_stack_set_visible_child_name(GTK_STACK(stack), name);
}
// ---- device preview: the last remote picture saved by the desktop window (src/viewer/thumbs.rs) ----
static GtkWidget *preview_bg;
static GdkPixbuf *thumb_pixbuf;
static char thumb_loaded[512];
static gint64 thumb_mtime;
static void load_thumb(const char *path) {
struct stat st; gint64 mtime = path[0] && stat(path, &st) == 0 ? (gint64)st.st_mtime : 0;
if (!strcmp(path, thumb_loaded) && mtime == thumb_mtime) return;
if (thumb_pixbuf) { g_object_unref(thumb_pixbuf); thumb_pixbuf = NULL; }
snprintf(thumb_loaded, sizeof thumb_loaded, "%s", path); thumb_mtime = mtime;
if (mtime) thumb_pixbuf = gdk_pixbuf_new_from_file(path, NULL);
if (preview_bg) gtk_widget_queue_draw(preview_bg);
}
static gboolean draw_preview(GtkWidget *w, cairo_t *cr, gpointer d) {
(void)d; if (!thumb_pixbuf) return FALSE;
double W = gtk_widget_get_allocated_width(w), H = gtk_widget_get_allocated_height(w), r = 12;
double pw = gdk_pixbuf_get_width(thumb_pixbuf), ph = gdk_pixbuf_get_height(thumb_pixbuf);
double scale = W / pw > H / ph ? W / pw : H / ph; // cover, centered
cairo_save(cr);
cairo_new_path(cr); cairo_arc(cr, r, r, r, G_PI, 1.5 * G_PI); cairo_arc(cr, W - r, r, r, 1.5 * G_PI, 2 * G_PI);
cairo_line_to(cr, W, H); cairo_line_to(cr, 0, H); cairo_close_path(cr); cairo_clip(cr);
cairo_translate(cr, (W - pw * scale) / 2, (H - ph * scale) / 2); cairo_scale(cr, scale, scale);
gdk_cairo_set_source_pixbuf(cr, thumb_pixbuf, 0, 0);
cairo_pattern_set_filter(cairo_get_source(cr), CAIRO_FILTER_GOOD); cairo_paint(cr);
cairo_restore(cr);
// Soft shade at the bottom keeps the "Open desktop" button readable on bright desktops.
cairo_pattern_t *g = cairo_pattern_create_linear(0, H * 0.55, 0, H);
cairo_pattern_add_color_stop_rgba(g, 0, 0, 0, 0, 0); cairo_pattern_add_color_stop_rgba(g, 1, 0, 0, 0, 0.35);
cairo_rectangle(cr, 0, 0, W, H); cairo_set_source(cr, g); cairo_fill(cr); cairo_pattern_destroy(g);
return FALSE;
}
static void show_device(int index) {
pthread_mutex_lock(&d_lock);
if (index < 0 || index >= device_count) { pthread_mutex_unlock(&d_lock); return; }
selected = index;
char name[128]; snprintf(name, sizeof name, "%s", devices[index].name);
int online = devices[index].online;
char thumb[512]; snprintf(thumb, sizeof thumb, "%s", devices[index].thumb);
pthread_mutex_unlock(&d_lock);
load_thumb(thumb);
set_header(name, 1);
gtk_label_set_markup(GTK_LABEL(badge), online ? "<span foreground='#22c55e'>●</span> 在线" : "离线");
gtk_label_set_text(GTK_LABEL(badge), online ? L("● 在线", "● Online") : L("离线", "Offline"));
GtkStyleContext *ctx = gtk_widget_get_style_context(badge);
if (online) gtk_style_context_remove_class(ctx, "off"); else gtk_style_context_add_class(ctx, "off");
gtk_stack_set_visible_child_name(GTK_STACK(stack), "device");
@@ -194,9 +216,9 @@ static void on_row(GtkListBox *box, GtkListBoxRow *row, gpointer d) {
gtk_list_box_unselect_all(GTK_LIST_BOX(box == GTK_LIST_BOX(device_list) ? assist_list : device_list));
const char *kind = g_object_get_data(G_OBJECT(row), "kind");
if (!kind) { show_device(GPOINTER_TO_INT(g_object_get_data(G_OBJECT(row), "index"))); return; }
if (!strcmp(kind, "all")) show_page("all", "全部设备");
else if (!strcmp(kind, "assist")) show_page("assist", "远程协助");
else if (!strcmp(kind, "favorite")) show_page("favorite", "收藏设备");
if (!strcmp(kind, "all")) show_page("all", L("全部设备", "All devices"));
else if (!strcmp(kind, "assist")) show_page("assist", L("远程协助", "Remote assistance"));
else if (!strcmp(kind, "favorite")) show_page("favorite", L("收藏设备", "Favorites"));
}
static void on_card(GtkButton *b, gpointer index) { (void)b; show_device(GPOINTER_TO_INT(index)); }
@@ -220,18 +242,18 @@ static void on_info(GtkButton *b, gpointer index) {
int i = GPOINTER_TO_INT(index);
char name[128] = "";
pthread_mutex_lock(&d_lock); if (i >= 0 && i < device_count) snprintf(name, sizeof name, "%s", devices[i].name); pthread_mutex_unlock(&d_lock);
GtkWidget *dialog = gtk_dialog_new_with_buttons("设备信息", GTK_WINDOW(window), GTK_DIALOG_MODAL, "完成", GTK_RESPONSE_OK, NULL);
GtkWidget *dialog = gtk_dialog_new_with_buttons(L("设备信息", "Device info"), GTK_WINDOW(window), GTK_DIALOG_MODAL, L("完成", "Done"), GTK_RESPONSE_OK, NULL);
GtkWidget *area = gtk_dialog_get_content_area(GTK_DIALOG(dialog)), *box = vbox(12);
gtk_container_set_border_width(GTK_CONTAINER(box), 20);
GtkWidget *c1 = vbox(8); add_class(c1, "card");
GtkWidget *r = hbox(8); gtk_box_pack_start(GTK_BOX(r), label("名称", "devname"), TRUE, TRUE, 0); gtk_box_pack_end(GTK_BOX(r), label(name, "hint"), FALSE, FALSE, 0);
GtkWidget *r = hbox(8); gtk_box_pack_start(GTK_BOX(r), label(L("名称", "Name"), "devname"), TRUE, TRUE, 0); gtk_box_pack_end(GTK_BOX(r), label(name, "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c1), r, FALSE, FALSE, 0);
GtkWidget *rename = button("重命名", "secondary"); gtk_widget_set_halign(rename, GTK_ALIGN_END);
g_signal_connect(rename, "clicked", G_CALLBACK(unsupported), "重命名");
GtkWidget *rename = button(L("重命名", "Rename"), "secondary"); gtk_widget_set_halign(rename, GTK_ALIGN_END);
g_signal_connect(rename, "clicked", G_CALLBACK(unsupported), L("重命名", "Rename"));
gtk_box_pack_start(GTK_BOX(c1), rename, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(box), c1, FALSE, FALSE, 0);
GtkWidget *c2 = vbox(10); add_class(c2, "card");
const char *rows[] = {"处理器", "网卡", "总内存", "系统版本", "显卡"};
const char *rows[] = {L("处理器", "Processor"), L("网卡", "Network adapter"), L("总内存", "Total memory"), L("系统版本", "OS version"), L("显卡", "Graphics")};
for (int k = 0; k < 5; k++) {
GtkWidget *line = hbox(8);
gtk_box_pack_start(GTK_BOX(line), label(rows[k], "devname"), TRUE, TRUE, 0);
@@ -239,7 +261,7 @@ static void on_info(GtkButton *b, gpointer index) {
gtk_box_pack_start(GTK_BOX(c2), line, FALSE, FALSE, 0);
}
gtk_box_pack_start(GTK_BOX(box), c2, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(box), label("硬件信息暂未获取。", "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(box), label(L("硬件信息暂未获取。", "Hardware info not available yet."), "hint"), FALSE, FALSE, 0);
gtk_container_add(GTK_CONTAINER(area), box);
gtk_widget_show_all(dialog); gtk_dialog_run(GTK_DIALOG(dialog)); gtk_widget_destroy(dialog);
}
@@ -249,8 +271,9 @@ static gboolean apply_devices(gpointer d) {
(void)d;
clear(device_list); clear(all_box);
pthread_mutex_lock(&d_lock);
if (selected >= 0 && selected < device_count) load_thumb(devices[selected].thumb);
if (!banner_closed) gtk_widget_show_all(banner);
char group[64]; snprintf(group, sizeof group, "⌄ 电脑 %d", device_count);
char group[64]; snprintf(group, sizeof group, L("⌄ 电脑 %d", "⌄ Computers %d"), device_count);
gtk_box_pack_start(GTK_BOX(all_box), label(group, "group"), FALSE, FALSE, 8);
for (int i = 0; i < device_count; i++) {
GtkWidget *row = gtk_list_box_row_new(), *line = hbox(8);
@@ -266,7 +289,7 @@ static gboolean apply_devices(gpointer d) {
GtkWidget *card = hbox(12); add_class(card, "card");
gtk_box_pack_start(GTK_BOX(card), platform_icon(devices[i].platform, 1), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(card), label(devices[i].name, "devname"), FALSE, FALSE, 0);
if (devices[i].current) gtk_box_pack_start(GTK_BOX(card), label("本机", "tag"), FALSE, FALSE, 0);
if (devices[i].current) gtk_box_pack_start(GTK_BOX(card), label(L("本机", "This device"), "tag"), FALSE, FALSE, 0);
GtkWidget *open = button("›", "hbtn"), *info = button("ⓘ", "hbtn");
g_signal_connect(info, "clicked", G_CALLBACK(on_info), GINT_TO_POINTER(i));
if (!devices[i].current) { g_signal_connect(open, "clicked", G_CALLBACK(on_card), GINT_TO_POINTER(i)); gtk_box_pack_end(GTK_BOX(card), open, FALSE, FALSE, 0); }
@@ -275,12 +298,20 @@ static gboolean apply_devices(gpointer d) {
gtk_box_pack_start(GTK_BOX(all_box), card, FALSE, FALSE, 4);
}
pthread_mutex_unlock(&d_lock);
gtk_list_box_insert(GTK_LIST_BOX(device_list), nav_row("◼", "全部设备", "all"), -1);
gtk_list_box_insert(GTK_LIST_BOX(device_list), nav_row("◼", L("全部设备", "All devices"), "all"), -1);
gtk_widget_show_all(device_list); gtk_widget_show_all(all_box);
return G_SOURCE_REMOVE;
}
static GtkWidget *account_who, *account_out;
/* The settings window is built once and kept; refresh its account card on every login change. */
static void refresh_account(void) {
if (!account_who) return;
gtk_label_set_text(GTK_LABEL(account_who), logged_in ? (user_text[0] ? user_text : L("已登录", "Signed in")) : L("未登录", "Not signed in"));
gtk_widget_set_sensitive(account_out, logged_in);
}
static gboolean apply_login(gpointer d) {
(void)d;
refresh_account();
gtk_label_set_text(GTK_LABEL(status_label), status_text);
if (qr_path[0]) {
GdkPixbuf *pix = gdk_pixbuf_new_from_file_at_size(qr_path, 240, 240, NULL);
@@ -288,9 +319,9 @@ static gboolean apply_login(gpointer d) {
} else gtk_image_clear(GTK_IMAGE(qr_image));
gtk_widget_set_visible(my_section, logged_in);
const char *page = gtk_stack_get_visible_child_name(GTK_STACK(stack));
if (logged_in && (!strcmp(page, "login") || !strcmp(page, "welcome"))) show_page("all", "全部设备");
if (!logged_in && strcmp(page, "login") && strcmp(page, "assist")) show_page("welcome", "全部设备");
if (!logged_in && qr_path[0]) { gtk_stack_set_visible_child_name(GTK_STACK(stack), "login"); set_header("登录", 0); }
if (logged_in && (!strcmp(page, "login") || !strcmp(page, "welcome"))) show_page("all", L("全部设备", "All devices"));
if (!logged_in && strcmp(page, "login") && strcmp(page, "assist")) show_page("welcome", L("全部设备", "All devices"));
if (!logged_in && qr_path[0]) { gtk_stack_set_visible_child_name(GTK_STACK(stack), "login"); set_header(L("登录", "Sign in"), 0); }
return G_SOURCE_REMOVE;
}
@@ -299,28 +330,28 @@ static GtkWidget *build_welcome(void) {
GtkWidget *page = vbox(22); gtk_widget_set_valign(page, GTK_ALIGN_CENTER); gtk_widget_set_halign(page, GTK_ALIGN_CENTER);
GtkWidget *art = gtk_event_box_new(); add_class(art, "preview"); gtk_widget_set_size_request(art, 520, 300);
gtk_box_pack_start(GTK_BOX(page), art, FALSE, FALSE, 0);
GtkWidget *t = label("随时访问个人设备,可用于办公、游戏、文件传输。", "h2"); gtk_widget_set_halign(t, GTK_ALIGN_CENTER);
GtkWidget *t = label(L("随时访问个人设备,可用于办公、游戏、文件传输。", "Access your devices anytime for work, gaming and file transfer."), "h2"); gtk_widget_set_halign(t, GTK_ALIGN_CENTER);
gtk_box_pack_start(GTK_BOX(page), t, FALSE, FALSE, 0);
GtkWidget *b = button("立即登录", "primary"); gtk_widget_set_halign(b, GTK_ALIGN_CENTER);
GtkWidget *b = button(L("立即登录", "Sign in now"), "primary"); gtk_widget_set_halign(b, GTK_ALIGN_CENTER);
g_signal_connect(b, "clicked", G_CALLBACK(on_login), NULL);
gtk_box_pack_start(GTK_BOX(page), b, FALSE, FALSE, 0);
return page;
}
static GtkWidget *build_login(void) {
GtkWidget *page = vbox(16); gtk_widget_set_valign(page, GTK_ALIGN_CENTER); gtk_widget_set_halign(page, GTK_ALIGN_CENTER);
GtkWidget *brand = label("UU 远程 Linux 控制端(非官方)", "h2"); gtk_widget_set_halign(brand, GTK_ALIGN_CENTER);
GtkWidget *t = label("扫码登录", "group"); gtk_widget_set_halign(t, GTK_ALIGN_CENTER);
GtkWidget *brand = label(L("UU 远程 Linux 控制端(非官方)", "UU Remote Linux viewer (unofficial)"), "h2"); gtk_widget_set_halign(brand, GTK_ALIGN_CENTER);
GtkWidget *t = label(L("扫码登录", "Scan to sign in"), "group"); gtk_widget_set_halign(t, GTK_ALIGN_CENTER);
gtk_box_pack_start(GTK_BOX(page), brand, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(page), t, FALSE, FALSE, 0);
GtkWidget *box = vbox(0); add_class(box, "qrbox"); gtk_widget_set_halign(box, GTK_ALIGN_CENTER);
qr_image = gtk_image_new(); gtk_widget_set_size_request(qr_image, 240, 240);
gtk_container_add(GTK_CONTAINER(box), qr_image);
gtk_box_pack_start(GTK_BOX(page), box, FALSE, FALSE, 0);
GtkWidget *h = label("请使用网易 UU 远程 App 扫一扫\n可快速登录", "hint"); gtk_label_set_justify(GTK_LABEL(h), GTK_JUSTIFY_CENTER); gtk_widget_set_halign(h, GTK_ALIGN_CENTER);
GtkWidget *h = label(L("请使用网易 UU 远程 App 扫一扫\n可快速登录", "Scan with the NetEase UU Remote app\nto sign in quickly"), "hint"); gtk_label_set_justify(GTK_LABEL(h), GTK_JUSTIFY_CENTER); gtk_widget_set_halign(h, GTK_ALIGN_CENTER);
gtk_box_pack_start(GTK_BOX(page), h, FALSE, FALSE, 0);
status_label = label("", "status"); gtk_widget_set_halign(status_label, GTK_ALIGN_CENTER);
gtk_box_pack_start(GTK_BOX(page), status_label, FALSE, FALSE, 0);
GtkWidget *again = button("刷新二维码", "secondary"); gtk_widget_set_halign(again, GTK_ALIGN_CENTER);
GtkWidget *again = button(L("刷新二维码", "Refresh QR code"), "secondary"); gtk_widget_set_halign(again, GTK_ALIGN_CENTER);
g_signal_connect(again, "clicked", G_CALLBACK(on_login), NULL);
gtk_box_pack_start(GTK_BOX(page), again, FALSE, FALSE, 0);
return page;
@@ -328,14 +359,15 @@ static GtkWidget *build_login(void) {
static GtkWidget *build_device(void) {
GtkWidget *page = vbox(0); gtk_container_set_border_width(GTK_CONTAINER(page), 26);
GtkWidget *preview = gtk_overlay_new(), *bg = gtk_event_box_new(); add_class(bg, "preview"); gtk_widget_set_size_request(bg, -1, 320);
preview_bg = bg; g_signal_connect_after(bg, "draw", G_CALLBACK(draw_preview), NULL);
gtk_container_add(GTK_CONTAINER(preview), bg);
GtkWidget *enter = button("进入桌面 →", "enter");
GtkWidget *enter = button(L("进入桌面 →", "Open desktop →"), "enter");
gtk_widget_set_halign(enter, GTK_ALIGN_CENTER); gtk_widget_set_valign(enter, GTK_ALIGN_END); gtk_widget_set_margin_bottom(enter, 26);
g_signal_connect(enter, "clicked", G_CALLBACK(on_tool), "desktop");
gtk_overlay_add_overlay(GTK_OVERLAY(preview), enter);
gtk_box_pack_start(GTK_BOX(page), preview, FALSE, FALSE, 0);
GtkWidget *tools = hbox(0); add_class(tools, "toolbar");
const char *names[] = {"🗂 文件传输", "▶ 观看模式", "⌨ 终端", "⇄ 端口映射", "▦"}, *kinds[] = {"file", "watch", "terminal", "portmap", "more"};
const char *names[] = {L("🗂 文件传输", "🗂 File transfer"), L("▶ 观看模式", "▶ Watch mode"), L("⌨ 终端", "⌨ Terminal"), L("⇄ 端口映射", "⇄ Port mapping"), "▦"}, *kinds[] = {"file", "watch", "terminal", "portmap", "more"};
for (int i = 0; i < 5; i++) {
GtkWidget *b = button(names[i], "tool");
g_signal_connect(b, "clicked", G_CALLBACK(on_tool), (gpointer)kinds[i]);
@@ -343,11 +375,11 @@ static GtkWidget *build_device(void) {
if (i < 4) gtk_box_pack_start(GTK_BOX(tools), gtk_separator_new(GTK_ORIENTATION_VERTICAL), FALSE, FALSE, 0);
}
gtk_box_pack_start(GTK_BOX(page), tools, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(page), label("快速启动", "h2"), FALSE, FALSE, 22);
gtk_box_pack_start(GTK_BOX(page), label(L("快速启动", "Quick launch"), "h2"), FALSE, FALSE, 22);
GtkWidget *quick = vbox(10); add_class(quick, "dashed");
GtkWidget *add = button("+", "round"); gtk_widget_set_halign(add, GTK_ALIGN_CENTER);
g_signal_connect(add, "clicked", G_CALLBACK(unsupported), "快速启动");
GtkWidget *al = label("添加", "hint"); gtk_widget_set_halign(al, GTK_ALIGN_CENTER);
g_signal_connect(add, "clicked", G_CALLBACK(unsupported), L("快速启动", "Quick launch"));
GtkWidget *al = label(L("添加", "Add"), "hint"); gtk_widget_set_halign(al, GTK_ALIGN_CENTER);
gtk_box_pack_start(GTK_BOX(quick), add, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(quick), al, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(page), quick, FALSE, FALSE, 0);
return page;
@@ -357,8 +389,8 @@ static GtkWidget *build_all(void) {
GtkWidget *page = vbox(8); gtk_container_set_border_width(GTK_CONTAINER(page), 26);
banner = hbox(10); add_class(banner, "banner");
GtkWidget *text = vbox(4);
gtk_box_pack_start(GTK_BOX(text), label("ⓘ 添加你的其他设备", "group"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(text), label("在其他电脑上安装 UU 远程官方客户端或本项目主机端,登录同一账号后即可在这里远程访问。", "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(text), label(L("ⓘ 添加你的其他设备", "ⓘ Add your other devices"), "group"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(text), label(L("在其他电脑上安装 UU 远程官方客户端或本项目主机端,登录同一账号后即可在这里远程访问。", "Install the official UU Remote client or this project's host on another computer and sign in with the same account to access it here."), "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(banner), text, TRUE, TRUE, 0);
GtkWidget *x = button("×", "hbtn"); gtk_widget_set_valign(x, GTK_ALIGN_START);
g_signal_connect(x, "clicked", G_CALLBACK(close_banner), NULL);
@@ -372,51 +404,51 @@ static GtkWidget *build_all(void) {
static void on_assist_connect(GtkButton *b, gpointer entry) {
(void)b;
const char *id = gtk_entry_get_text(GTK_ENTRY(entry));
if (!id[0]) { show_toast("请输入伙伴的设备 ID"); return; }
if (!id[0]) { show_toast(L("请输入伙伴的设备 ID", "Enter your partner's device ID")); return; }
GtkWidget *code_entry = g_object_get_data(G_OBJECT(entry), "assist-code");
const char *code = gtk_entry_get_text(GTK_ENTRY(code_entry));
if (!code[0]) { show_toast("请输入伙伴的设备验证码"); return; }
if (strpbrk(id, "\t\r\n") || strpbrk(code, "\t\r\n")) { show_toast("设备 ID 和验证码不能包含换行或制表符"); return; }
if (!code[0]) { show_toast(L("请输入伙伴的设备验证码", "Enter your partner's verification code")); return; }
if (strpbrk(id, "\t\r\n") || strpbrk(code, "\t\r\n")) { show_toast(L("设备 ID 和验证码不能包含换行或制表符", "Device ID and code cannot contain line breaks or tabs")); return; }
char cmd[200];
int n = snprintf(cmd, sizeof cmd, "assist\t%s\t%s", id, code);
if (n < 0 || (size_t)n >= sizeof cmd) { show_toast("设备 ID 或验证码过长"); return; }
if (n < 0 || (size_t)n >= sizeof cmd) { show_toast(L("设备 ID 或验证码过长", "Device ID or code is too long")); return; }
int accepted = push(cmd);
memset(cmd, 0, sizeof cmd);
if (!accepted) { show_toast("连接请求过多,请稍后重试"); return; }
if (!accepted) { show_toast(L("连接请求过多,请稍后重试", "Too many connection requests, try again later")); return; }
gtk_entry_set_text(GTK_ENTRY(code_entry), "");
show_toast("正在连接…");
show_toast(L("正在连接…", "Connecting…"));
}
static GtkWidget *build_assist(void) {
GtkWidget *page = vbox(20); gtk_container_set_border_width(GTK_CONTAINER(page), 26);
GtkWidget *mine = vbox(14); add_class(mine, "card");
GtkWidget *top = hbox(10); gtk_box_pack_start(GTK_BOX(top), label("本设备", "h2"), TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(top), label("允许他人远程协助", "devname"), FALSE, FALSE, 0);
GtkWidget *top = hbox(10); gtk_box_pack_start(GTK_BOX(top), label(L("本设备", "This device"), "h2"), TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(top), label(L("允许他人远程协助", "Allow remote assistance"), "devname"), FALSE, FALSE, 0);
GtkWidget *sw = gtk_switch_new(); gtk_widget_set_sensitive(sw, FALSE); gtk_box_pack_start(GTK_BOX(top), sw, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(mine), top, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(mine), gtk_separator_new(GTK_ORIENTATION_HORIZONTAL), FALSE, FALSE, 0);
GtkWidget *grid = hbox(40), *c1 = vbox(6), *c2 = vbox(6);
gtk_box_pack_start(GTK_BOX(c1), label("本设备 ID", "devname"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c1), label(L("本设备 ID", "This device's ID"), "devname"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c1), label("— — —", "big"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c2), label("验证方式:仅使用临时验证码", "devname"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c2), label(L("验证方式:仅使用临时验证码", "Verification: temporary code only"), "devname"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c2), label("—", "big"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c2), label("每次远控结束刷新", "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(c2), label(L("每次远控结束刷新", "Refreshed after every remote session"), "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(grid), c1, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(grid), c2, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(mine), grid, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(mine), label("本机被协助由 uuremote-server 主机端提供(uuremote-server assist)。", "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(mine), label(L("本机被协助由 uuremote-server 主机端提供(uuremote-server assist)。", "Assistance for this computer is provided by the uuremote-server host (uuremote-server assist)."), "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(page), mine, FALSE, FALSE, 0);
GtkWidget *peer = vbox(12); add_class(peer, "card");
gtk_box_pack_start(GTK_BOX(peer), label("远控伙伴设备", "h2"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(peer), label("通过其他设备的【设备 ID】及【设备验证码】启动远程控制", "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(peer), label(L("远控伙伴设备", "Control a partner's device"), "h2"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(peer), label(L("通过其他设备的【设备 ID】及【设备验证码】启动远程控制", "Start remote control with another device's [Device ID] and [Verification code]"), "hint"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(peer), gtk_separator_new(GTK_ORIENTATION_HORIZONTAL), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(peer), label("伙伴的设备 ID", "devname"), FALSE, FALSE, 0);
GtkWidget *row = hbox(20), *entry = gtk_entry_new(); gtk_entry_set_placeholder_text(GTK_ENTRY(entry), "请输入设备 ID"); gtk_widget_set_size_request(entry, 320, -1);
GtkWidget *code = gtk_entry_new(); gtk_entry_set_placeholder_text(GTK_ENTRY(code), "请输入设备验证码");
gtk_box_pack_start(GTK_BOX(peer), label(L("伙伴的设备 ID", "Partner's device ID"), "devname"), FALSE, FALSE, 0);
GtkWidget *row = hbox(20), *entry = gtk_entry_new(); gtk_entry_set_placeholder_text(GTK_ENTRY(entry), L("请输入设备 ID", "Enter device ID")); gtk_widget_set_size_request(entry, 320, -1);
GtkWidget *code = gtk_entry_new(); gtk_entry_set_placeholder_text(GTK_ENTRY(code), L("请输入设备验证码", "Enter verification code"));
gtk_entry_set_visibility(GTK_ENTRY(code), FALSE);
gtk_entry_set_input_purpose(GTK_ENTRY(code), GTK_INPUT_PURPOSE_PASSWORD);
gtk_entry_set_max_length(GTK_ENTRY(entry), 64); gtk_entry_set_max_length(GTK_ENTRY(code), 64);
g_object_set_data(G_OBJECT(entry), "assist-code", code);
g_signal_connect(code, "activate", G_CALLBACK(on_assist_connect), entry);
GtkWidget *go = button("连接", "primary"); g_signal_connect(go, "clicked", G_CALLBACK(on_assist_connect), entry);
GtkWidget *go = button(L("连接", "Connect"), "primary"); g_signal_connect(go, "clicked", G_CALLBACK(on_assist_connect), entry);
gtk_box_pack_start(GTK_BOX(row), entry, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(row), code, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(row), go, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(peer), row, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(page), peer, FALSE, FALSE, 0);
@@ -424,10 +456,10 @@ static GtkWidget *build_assist(void) {
}
static void on_add_favorite(GtkButton *b, gpointer d) {
(void)b; (void)d;
GtkWidget *dialog = gtk_dialog_new_with_buttons("添加收藏设备", GTK_WINDOW(window), GTK_DIALOG_MODAL, "取消", GTK_RESPONSE_CANCEL, "添加", GTK_RESPONSE_OK, NULL);
GtkWidget *dialog = gtk_dialog_new_with_buttons(L("添加收藏设备", "Add favorite device"), GTK_WINDOW(window), GTK_DIALOG_MODAL, L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("添加", "Add"), GTK_RESPONSE_OK, NULL);
GtkWidget *area = gtk_dialog_get_content_area(GTK_DIALOG(dialog)), *card = vbox(12); add_class(card, "card");
gtk_container_set_border_width(GTK_CONTAINER(area), 16);
const char *names[] = {"伙伴的设备 ID", "设备验证码(可选)", "备注名称(可选)"}, *hints[] = {"请输入设备 ID", "请输入设备验证码", "请输入名称"};
const char *names[] = {L("伙伴的设备 ID", "Partner's device ID"), L("设备验证码(可选)", "Verification code (optional)"), L("备注名称(可选)", "Nickname (optional)")}, *hints[] = {L("请输入设备 ID", "Enter device ID"), L("请输入设备验证码", "Enter verification code"), L("请输入名称", "Enter a name")};
GtkWidget *first = NULL;
for (int i = 0; i < 3; i++) {
GtkWidget *line = hbox(20), *e = gtk_entry_new(); gtk_entry_set_placeholder_text(GTK_ENTRY(e), hints[i]); gtk_widget_set_size_request(e, 280, -1);
@@ -440,17 +472,17 @@ static void on_add_favorite(GtkButton *b, gpointer d) {
int response = gtk_dialog_run(GTK_DIALOG(dialog));
int has_id = first && gtk_entry_get_text(GTK_ENTRY(first))[0];
gtk_widget_destroy(dialog);
if (response == GTK_RESPONSE_OK) show_toast(has_id ? "收藏设备:暂未支持" : "请输入伙伴的设备 ID");
if (response == GTK_RESPONSE_OK) show_toast(has_id ? L("收藏设备:暂未支持", "Favorite devices: not supported yet") : L("请输入伙伴的设备 ID", "Enter your partner's device ID"));
}
static GtkWidget *build_favorite(void) {
GtkWidget *page = vbox(10); gtk_container_set_border_width(GTK_CONTAINER(page), 26);
GtkWidget *add = button("添加收藏设备", "secondary"); gtk_widget_set_halign(add, GTK_ALIGN_END);
GtkWidget *add = button(L("添加收藏设备", "Add favorite device"), "secondary"); gtk_widget_set_halign(add, GTK_ALIGN_END);
g_signal_connect(add, "clicked", G_CALLBACK(on_add_favorite), NULL);
gtk_box_pack_start(GTK_BOX(page), add, FALSE, FALSE, 0);
fav_stack = gtk_stack_new();
GtkWidget *empty = vbox(10); gtk_widget_set_valign(empty, GTK_ALIGN_CENTER);
GtkWidget *box = label("📦", "big"); gtk_widget_set_halign(box, GTK_ALIGN_CENTER);
GtkWidget *t = label("暂无收藏", "devname"); gtk_widget_set_halign(t, GTK_ALIGN_CENTER);
GtkWidget *t = label(L("暂无收藏", "No favorites yet"), "devname"); gtk_widget_set_halign(t, GTK_ALIGN_CENTER);
gtk_box_pack_start(GTK_BOX(empty), box, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(empty), t, FALSE, FALSE, 0);
gtk_stack_add_named(GTK_STACK(fav_stack), empty, "empty");
gtk_box_pack_start(GTK_BOX(page), fav_stack, TRUE, TRUE, 0);
@@ -478,7 +510,7 @@ static GtkWidget *settings_card(GtkWidget **rows, int n) {
return card;
}
static GtkWidget *settings_page(void) { GtkWidget *p = vbox(14); gtk_container_set_border_width(GTK_CONTAINER(p), 22); return p; }
static GtkWidget *edit_button(const char *what) { GtkWidget *b = button("编辑", "secondary"); g_signal_connect(b, "clicked", G_CALLBACK(unsupported), (gpointer)what); return b; }
static GtkWidget *edit_button(const char *what) { GtkWidget *b = button(L("编辑", "Edit"), "secondary"); g_signal_connect(b, "clicked", G_CALLBACK(unsupported), (gpointer)what); return b; }
static gboolean settings_hidden(GtkWidget *w, GdkEvent *e, gpointer d) { (void)e; (void)d; gtk_widget_hide(w); return TRUE; }
static gboolean settings_key(GtkWidget *w, GdkEventKey *e, gpointer d) { (void)d; if (e->keyval == GDK_KEY_Escape) { gtk_widget_hide(w); return TRUE; } return FALSE; }
// Compositors such as Hyprland draw no title bar, so windows carry their own (with a close button).
@@ -488,15 +520,31 @@ static void own_titlebar(GtkWidget *w, const char *title) {
gtk_header_bar_set_show_close_button(GTK_HEADER_BAR(bar), TRUE);
gtk_window_set_titlebar(GTK_WINDOW(w), bar);
}
static atomic_int host_active;
static GtkWidget *host_switch;
static gboolean host_idle(gpointer d) { (void)d; if (host_switch) gtk_switch_set_active(GTK_SWITCH(host_switch), atomic_load(&host_active)); return G_SOURCE_REMOVE; }
void uu_viewer_ui_set_host(int active) { atomic_store(&host_active, active != 0); g_idle_add(host_idle, NULL); }
static void on_host(GObject *o, GParamSpec *p, gpointer d) {
(void)p; (void)d; int on = gtk_switch_get_active(GTK_SWITCH(o));
if (on != atomic_load(&host_active)) { atomic_store(&host_active, on); push(on ? "host\ton" : "host\toff"); }
}
static void on_language(GtkComboBox *c, gpointer d) {
(void)d; int english = gtk_combo_box_get_active(c) == 1;
if (english == uu_i18n_english()) return;
if (!uu_i18n_save(english)) show_toast(L("无法保存语言设置", "Could not save the language"));
else push("relaunch");
}
static void confirm_logout(void);
static void on_sign_out(GtkButton *b, gpointer d) { (void)b; (void)d; if (logged_in) confirm_logout(); }
static void open_settings(void) {
if (settings_window) { gtk_window_present(GTK_WINDOW(settings_window)); return; }
if (settings_window) { refresh_account(); gtk_window_present(GTK_WINDOW(settings_window)); return; }
settings_window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_window_set_title(GTK_WINDOW(settings_window), "设置");
gtk_window_set_title(GTK_WINDOW(settings_window), L("设置", "Settings"));
gtk_window_set_transient_for(GTK_WINDOW(settings_window), GTK_WINDOW(window));
gtk_window_set_default_size(GTK_WINDOW(settings_window), 680, 600);
g_signal_connect(settings_window, "delete-event", G_CALLBACK(settings_hidden), NULL);
g_signal_connect(settings_window, "key-press-event", G_CALLBACK(settings_key), NULL);
own_titlebar(settings_window, "设置");
own_titlebar(settings_window, L("设置", "Settings"));
GtkWidget *root = vbox(0), *tabs = gtk_stack_new(), *switcher = gtk_stack_switcher_new();
gtk_stack_switcher_set_stack(GTK_STACK_SWITCHER(switcher), GTK_STACK(tabs));
gtk_widget_set_halign(switcher, GTK_ALIGN_CENTER); gtk_widget_set_margin_top(switcher, 10); gtk_widget_set_margin_bottom(switcher, 6);
@@ -504,60 +552,77 @@ static void open_settings(void) {
gtk_box_pack_start(GTK_BOX(root), gtk_separator_new(GTK_ORIENTATION_HORIZONTAL), FALSE, FALSE, 0);
// 常规
GtkWidget *general = settings_page();
const char *wake[] = {"永不", "接通电源时", "始终"}, *close_opts[] = {"最小化", "退出程序"};
GtkWidget *g1[] = { setting_row("开机自启动", NULL, gtk_switch_new()),
setting_row("保持唤醒状态", "防止电脑进入睡眠状态,导致无法远程访问。", combo(wake, 3)),
setting_row("关闭窗口时", NULL, combo(close_opts, 2)) };
GtkWidget *acct = hbox(12), *acct_text = vbox(2);
gtk_box_pack_start(GTK_BOX(acct_text), label(L("账号", "Account"), "devname"), FALSE, FALSE, 0);
account_who = label("", "hint"); gtk_box_pack_start(GTK_BOX(acct_text), account_who, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(acct), acct_text, TRUE, TRUE, 0);
account_out = button(L("退出登录", "Sign out"), "secondary"); gtk_widget_set_valign(account_out, GTK_ALIGN_CENTER);
g_signal_connect(account_out, "clicked", G_CALLBACK(on_sign_out), NULL); gtk_box_pack_end(GTK_BOX(acct), account_out, FALSE, FALSE, 0);
GtkWidget *g0[] = { acct };
gtk_box_pack_start(GTK_BOX(general), settings_card(g0, 1), FALSE, FALSE, 0);
refresh_account();
const char *languages[] = {"中文", "English"}; GtkWidget *language = combo(languages, 2);
gtk_combo_box_set_active(GTK_COMBO_BOX(language), uu_i18n_english()); g_signal_connect(language, "changed", G_CALLBACK(on_language), NULL);
GtkWidget *g4[] = { setting_row("语言 / Language", NULL, language), uu_theme_selector() };
gtk_box_pack_start(GTK_BOX(general), settings_card(g4, 2), FALSE, FALSE, 0);
const char *wake[] = {L("永不", "Never"), L("接通电源时", "When plugged in"), L("始终", "Always")}, *close_opts[] = {L("最小化", "Minimize"), L("退出程序", "Quit")};
GtkWidget *g1[] = { setting_row(L("开机自启动", "Start at login"), NULL, gtk_switch_new()),
setting_row(L("保持唤醒状态", "Stay awake"), L("防止电脑进入睡眠状态,导致无法远程访问。", "Keep the computer from sleeping so it stays reachable."), combo(wake, 3)),
setting_row(L("关闭窗口时", "When closing the window"), NULL, combo(close_opts, 2)) };
gtk_box_pack_start(GTK_BOX(general), settings_card(g1, 3), FALSE, FALSE, 0);
GtkWidget *path = hbox(8); GtkWidget *change = button("修改路径", "secondary"), *open = button("打开文件夹", "secondary");
g_signal_connect(change, "clicked", G_CALLBACK(unsupported), "修改路径"); g_signal_connect(open, "clicked", G_CALLBACK(unsupported), "打开文件夹");
GtkWidget *path = hbox(8); GtkWidget *change = button(L("修改路径", "Change path"), "secondary"), *open = button(L("打开文件夹", "Open folder"), "secondary");
g_signal_connect(change, "clicked", G_CALLBACK(unsupported), L("修改路径", "Change path")); g_signal_connect(open, "clicked", G_CALLBACK(unsupported), L("打开文件夹", "Open folder"));
gtk_box_pack_end(GTK_BOX(path), open, FALSE, FALSE, 0); gtk_box_pack_end(GTK_BOX(path), change, FALSE, FALSE, 0);
GtkWidget *g2[] = { setting_row("传输文件存储路径", "~/Downloads", path) };
GtkWidget *g2[] = { setting_row(L("传输文件存储路径", "Received files folder"), "~/Downloads", path) };
gtk_box_pack_start(GTK_BOX(general), settings_card(g2, 1), FALSE, FALSE, 0);
GtkWidget *real = button("在手机 App 中查看", "secondary"); gtk_widget_set_sensitive(real, FALSE);
GtkWidget *g3[] = { setting_row("实名认证", NULL, real) };
GtkWidget *real = button(L("在手机 App 中查看", "View in the mobile app"), "secondary"); gtk_widget_set_sensitive(real, FALSE);
GtkWidget *g3[] = { setting_row(L("实名认证", "Identity verification"), NULL, real) };
gtk_box_pack_start(GTK_BOX(general), settings_card(g3, 1), FALSE, FALSE, 0);
gtk_stack_add_titled(GTK_STACK(tabs), general, "general", "⚙ 常规");
GtkWidget *gscroll = gtk_scrolled_window_new(NULL, NULL);
gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(gscroll), GTK_POLICY_NEVER, GTK_POLICY_AUTOMATIC);
gtk_container_add(GTK_CONTAINER(gscroll), general);
gtk_stack_add_titled(GTK_STACK(tabs), gscroll, "general", L("⚙ 常规", "⚙ General"));
// 安全
GtkWidget *security = settings_page();
const char *verify[] = {"仅使用临时验证码", "仅使用自定义验证码", "临时与自定义验证码"};
GtkWidget *s1[] = { setting_row("允许同账号控制本设备", NULL, gtk_switch_new()), setting_row("允许他人远程协助", NULL, gtk_switch_new()) };
GtkWidget *s2[] = { setting_row("远程协助连接本设备的验证方式", NULL, combo(verify, 3)) };
GtkWidget *s3[] = { setting_row("客户端锁定", "防止客户端设置被修改,保障数据与使用安全。", gtk_switch_new()) };
const char *verify[] = {L("仅使用临时验证码", "Temporary code only"), L("仅使用自定义验证码", "Custom code only"), L("临时与自定义验证码", "Temporary and custom codes")};
host_switch = gtk_switch_new(); gtk_switch_set_active(GTK_SWITCH(host_switch), atomic_load(&host_active));
g_signal_connect(host_switch, "notify::active", G_CALLBACK(on_host), NULL);
GtkWidget *s1[] = { setting_row(L("允许同账号控制本设备", "Allow the same account to control this device"), L("默认关闭。开启后本机会出现在你的设备列表中,可被远程控制(uuremote-server 用户服务)", "Off by default. When on, this computer appears in your device list and can be controlled (uuremote-server user service)"), host_switch), setting_row(L("允许他人远程协助", "Allow remote assistance"), NULL, gtk_switch_new()) };
GtkWidget *s2[] = { setting_row(L("远程协助连接本设备的验证方式", "Verification for remote assistance"), NULL, combo(verify, 3)) };
GtkWidget *s3[] = { setting_row(L("客户端锁定", "Lock client"), L("防止客户端设置被修改,保障数据与使用安全。", "Prevents client settings from being changed, keeping data and usage safe."), gtk_switch_new()) };
gtk_box_pack_start(GTK_BOX(security), settings_card(s1, 2), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(security), settings_card(s2, 1), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(security), settings_card(s3, 1), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(security), label("本机被控相关设置由 uuremote-server 主机端提供。", "hint"), FALSE, FALSE, 0);
gtk_stack_add_titled(GTK_STACK(tabs), security, "security", "🔒 安全");
gtk_stack_add_titled(GTK_STACK(tabs), security, "security", L("🔒 安全", "🔒 Security"));
// 键盘
GtkWidget *keys = settings_page();
gtk_box_pack_start(GTK_BOX(keys), label("仅控制端响应的快捷键", "h2"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(keys), label("远控时按下以下快捷键,仅在控制端本地响应,不会发送到被控端。", "hint"), FALSE, FALSE, 0);
GtkWidget *addk = button("添加控制端快捷键", "secondary"); g_signal_connect(addk, "clicked", G_CALLBACK(unsupported), "添加快捷键");
GtkWidget *k1[] = { setting_row("当前暂无设置", NULL, NULL), setting_row("", NULL, addk) };
gtk_box_pack_start(GTK_BOX(keys), label(L("仅控制端响应的快捷键", "Viewer-only shortcuts"), "h2"), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(keys), label(L("远控时按下以下快捷键,仅在控制端本地响应,不会发送到被控端。", "These shortcuts are handled locally on the viewer and are not sent to the remote device."), "hint"), FALSE, FALSE, 0);
GtkWidget *addk = button(L("添加控制端快捷键", "Add viewer shortcut"), "secondary"); g_signal_connect(addk, "clicked", G_CALLBACK(unsupported), L("添加快捷键", "Add shortcut"));
GtkWidget *k1[] = { setting_row(L("当前暂无设置", "Nothing set yet"), NULL, NULL), setting_row("", NULL, addk) };
gtk_box_pack_start(GTK_BOX(keys), settings_card(k1, 2), FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(keys), label("功能快捷键", "h2"), FALSE, FALSE, 6);
gtk_box_pack_start(GTK_BOX(keys), label("按下以下快捷键时,仅在本地触发对应功能,不会发送到被控端。", "hint"), FALSE, FALSE, 0);
const char *fns[] = {"使用被控端鼠标/解锁鼠标", "被控时解除防窥模式", "切换上一个屏幕", "切换下一个屏幕", "显示/隐藏悬浮球", "静音/取消静音", "老板键(隐藏/显示所有客户端窗口)", "发送 Ctrl+Alt+Delete 组合键"};
gtk_box_pack_start(GTK_BOX(keys), label(L("功能快捷键", "Function shortcuts"), "h2"), FALSE, FALSE, 6);
gtk_box_pack_start(GTK_BOX(keys), label(L("按下以下快捷键时,仅在本地触发对应功能,不会发送到被控端。", "These shortcuts trigger local functions only and are not sent to the remote device."), "hint"), FALSE, FALSE, 0);
const char *fns[] = {L("使用被控端鼠标/解锁鼠标", "Use remote mouse / release mouse"), L("被控时解除防窥模式", "Turn off privacy screen while controlled"), L("切换上一个屏幕", "Previous screen"), L("切换下一个屏幕", "Next screen"), L("显示/隐藏悬浮球", "Show/hide floating ball"), L("静音/取消静音", "Mute/unmute"), L("老板键(隐藏/显示所有客户端窗口)", "Boss key (hide/show all client windows)"), L("发送 Ctrl+Alt+Delete 组合键", "Send Ctrl+Alt+Delete")};
GtkWidget *k2[8];
for (int i = 0; i < 8; i++) k2[i] = setting_row(fns[i], NULL, edit_button(fns[i]));
gtk_box_pack_start(GTK_BOX(keys), settings_card(k2, 8), FALSE, FALSE, 0);
GtkWidget *kscroll = gtk_scrolled_window_new(NULL, NULL); gtk_container_add(GTK_CONTAINER(kscroll), keys);
gtk_stack_add_titled(GTK_STACK(tabs), kscroll, "keys", "⌨ 键盘");
gtk_stack_add_titled(GTK_STACK(tabs), kscroll, "keys", L("⌨ 键盘", "⌨ Keyboard"));
// 网络
GtkWidget *network = settings_page();
const char *proxy[] = {"使用系统环境代理", "不使用代理"};
GtkWidget *n1[] = { setting_row("代理设置", NULL, combo(proxy, 2)) };
const char *proxy[] = {L("使用系统环境代理", "Use system proxy"), L("不使用代理", "No proxy")};
GtkWidget *n1[] = { setting_row(L("代理设置", "Proxy"), NULL, combo(proxy, 2)) };
gtk_box_pack_start(GTK_BOX(network), settings_card(n1, 1), FALSE, FALSE, 0);
gtk_stack_add_titled(GTK_STACK(tabs), network, "network", "🌐 网络");
gtk_stack_add_titled(GTK_STACK(tabs), network, "network", L("🌐 网络", "🌐 Network"));
gtk_box_pack_start(GTK_BOX(root), tabs, TRUE, TRUE, 0);
gtk_container_add(GTK_CONTAINER(settings_window), root);
gtk_widget_show_all(settings_window);
}
static void confirm_logout(void) {
GtkWidget *d = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL, GTK_MESSAGE_WARNING, GTK_BUTTONS_NONE, "确定要退出登录吗?");
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(d), "退出登录会中断正在进行中的连接,你的设备也将从本账户删除。请谨慎操作!");
gtk_dialog_add_buttons(GTK_DIALOG(d), "取消", GTK_RESPONSE_CANCEL, "确认", GTK_RESPONSE_OK, NULL);
GtkWidget *d = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL, GTK_MESSAGE_WARNING, GTK_BUTTONS_NONE, L("确定要退出登录吗?", "Sign out?"));
gtk_message_dialog_format_secondary_text(GTK_MESSAGE_DIALOG(d), L("退出登录会中断正在进行中的连接,你的设备也将从本账户删除。请谨慎操作!", "Signing out ends active connections and removes your device from this account. Be careful!"));
gtk_dialog_add_buttons(GTK_DIALOG(d), L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("确认", "Confirm"), GTK_RESPONSE_OK, NULL);
if (gtk_dialog_run(GTK_DIALOG(d)) == GTK_RESPONSE_OK) push("logout");
gtk_widget_destroy(d);
}
@@ -571,15 +636,15 @@ static void on_menu(GtkMenuItem *item, gpointer what) {
static void popup(GtkButton *b, gpointer kind) {
GtkWidget *menu = gtk_menu_new();
if (!strcmp(kind, "account")) {
GtkWidget *who = gtk_menu_item_new_with_label(logged_in ? (user_text[0] ? user_text : "已登录") : "未登录"); gtk_widget_set_sensitive(who, FALSE);
GtkWidget *who = gtk_menu_item_new_with_label(logged_in ? (user_text[0] ? user_text : L("已登录", "Signed in")) : L("未登录", "Not signed in")); gtk_widget_set_sensitive(who, FALSE);
gtk_menu_shell_append(GTK_MENU_SHELL(menu), who);
GtkWidget *out = gtk_menu_item_new_with_label("退出登录"); g_signal_connect(out, "activate", G_CALLBACK(on_menu), "logout");
GtkWidget *out = gtk_menu_item_new_with_label(L("退出登录", "Sign out")); g_signal_connect(out, "activate", G_CALLBACK(on_menu), "logout");
gtk_widget_set_sensitive(out, logged_in); gtk_menu_shell_append(GTK_MENU_SHELL(menu), out);
} else if (!strcmp(kind, "notice")) {
GtkWidget *none = gtk_menu_item_new_with_label("暂无通知"); gtk_widget_set_sensitive(none, FALSE);
GtkWidget *none = gtk_menu_item_new_with_label(L("暂无通知", "No notifications")); gtk_widget_set_sensitive(none, FALSE);
gtk_menu_shell_append(GTK_MENU_SHELL(menu), none);
} else {
const char *labels[] = {"刷新设备列表", "设置", "退出程序"}, *whats[] = {"refresh", "settings", "quit"};
const char *labels[] = {L("刷新设备列表", "Refresh device list"), L("设置", "Settings"), L("退出程序", "Quit")}, *whats[] = {"refresh", "settings", "quit"};
for (int i = 0; i < 3; i++) { GtkWidget *it = gtk_menu_item_new_with_label(labels[i]); g_signal_connect(it, "activate", G_CALLBACK(on_menu), (gpointer)whats[i]); gtk_menu_shell_append(GTK_MENU_SHELL(menu), it); }
}
gtk_widget_show_all(menu);
@@ -590,34 +655,32 @@ static gboolean on_delete(GtkWidget *w, GdkEvent *e, gpointer d) { (void)w; (voi
static void *run(void *arg) {
(void)arg;
int ok = gtk_init_check(NULL, NULL);
// The CSS hard-codes a light palette; a dark system theme would turn unstyled text white on white (#43).
if (ok) g_object_set(gtk_settings_get_default(), "gtk-theme-name", "Adwaita", "gtk-application-prefer-dark-theme", FALSE, NULL);
if (ok) { gtk_window_set_default_icon_name("uu-remote-linux"); } // same taskbar icon as the host (#13)
if (ok) {
GtkCssProvider *css = gtk_css_provider_new();
gtk_css_provider_load_from_data(css, CSS, -1, NULL);
gtk_style_context_add_provider_for_screen(gdk_screen_get_default(), GTK_STYLE_PROVIDER(css), GTK_STYLE_PROVIDER_PRIORITY_APPLICATION);
uu_theme_init();
uu_theme_load_css(CSS);
window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_window_set_title(GTK_WINDOW(window), "UU 远程 Linux 控制端(非官方)");
gtk_window_set_title(GTK_WINDOW(window), L("UU 远程 Linux 控制端(非官方)", "UU Remote Linux viewer (unofficial)"));
gtk_window_set_default_size(GTK_WINDOW(window), 1180, 780);
g_signal_connect(window, "delete-event", G_CALLBACK(on_delete), NULL);
own_titlebar(window, "UU 远程 Linux 控制端(非官方)");
own_titlebar(window, L("UU 远程 Linux 控制端(非官方)", "UU Remote Linux viewer (unofficial)"));
GtkWidget *root = hbox(0);
// Sidebar
GtkWidget *side = vbox(0); add_class(side, "sidebar"); gtk_widget_set_size_request(side, 270, -1);
my_section = vbox(0);
GtkWidget *mh = hbox(8); gtk_widget_set_margin_start(mh, 18); gtk_widget_set_margin_top(mh, 22); gtk_widget_set_margin_bottom(mh, 6);
gtk_box_pack_start(GTK_BOX(mh), label("⧉ 我的设备", "section"), TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(mh), label(L("⧉ 我的设备", "⧉ My devices"), "section"), TRUE, TRUE, 0);
gtk_box_pack_start(GTK_BOX(my_section), mh, FALSE, FALSE, 0);
device_list = gtk_list_box_new(); g_signal_connect(device_list, "row-activated", G_CALLBACK(on_row), NULL);
gtk_box_pack_start(GTK_BOX(my_section), device_list, FALSE, FALSE, 0);
GtkWidget *scroll = gtk_scrolled_window_new(NULL, NULL); gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scroll), GTK_POLICY_NEVER, GTK_POLICY_AUTOMATIC);
GtkWidget *side_inner = vbox(0); gtk_box_pack_start(GTK_BOX(side_inner), my_section, FALSE, FALSE, 0);
GtkWidget *welcome_nav = gtk_list_box_new(); g_signal_connect(welcome_nav, "row-activated", G_CALLBACK(on_row), NULL);
GtkWidget *ah = label("⧉ 远程协助", "section"); gtk_widget_set_margin_start(ah, 18); gtk_widget_set_margin_top(ah, 16); gtk_widget_set_margin_bottom(ah, 6);
GtkWidget *ah = label(L("⧉ 远程协助", "⧉ Remote assistance"), "section"); gtk_widget_set_margin_start(ah, 18); gtk_widget_set_margin_top(ah, 16); gtk_widget_set_margin_bottom(ah, 6);
gtk_box_pack_start(GTK_BOX(side_inner), ah, FALSE, FALSE, 0);
GtkWidget *assist = assist_list = gtk_list_box_new(); g_signal_connect(assist, "row-activated", G_CALLBACK(on_row), NULL);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("◧", "开始协助", "assist"), -1);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("★", "收藏设备", "favorite"), -1);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("◧", L("开始协助", "Start assistance"), "assist"), -1);
gtk_list_box_insert(GTK_LIST_BOX(assist), nav_row("★", L("收藏设备", "Favorites"), "favorite"), -1);
gtk_box_pack_start(GTK_BOX(side_inner), assist, FALSE, FALSE, 0);
gtk_list_box_unselect_all(GTK_LIST_BOX(assist));
(void)welcome_nav;
@@ -627,7 +690,7 @@ static void *run(void *arg) {
// Main area
GtkWidget *main = vbox(0), *header = hbox(10); add_class(header, "header");
badge = gtk_label_new(""); add_class(badge, "badge");
title_label = label("全部设备", "title");
title_label = label(L("全部设备", "All devices"), "title");
more_button = button("⋮", "hbtn"); g_signal_connect(more_button, "clicked", G_CALLBACK(on_more), NULL);
gtk_box_pack_start(GTK_BOX(header), badge, FALSE, FALSE, 0);
gtk_box_pack_start(GTK_BOX(header), title_label, FALSE, FALSE, 0);
@@ -675,12 +738,13 @@ void uu_viewer_ui_set_devices(const char *tsv) {
device_count = 0;
char *copy = strdup(tsv ? tsv : ""), *save = NULL;
for (char *line = strtok_r(copy, "\n", &save); line && device_count < 64; line = strtok_r(NULL, "\n", &save)) {
char *f[5] = {0}, *s2 = NULL; int n = 0;
for (char *p = strtok_r(line, "\t", &s2); p && n < 5; p = strtok_r(NULL, "\t", &s2)) f[n++] = p;
char *f[6] = {0}, *s2 = NULL; int n = 0;
for (char *p = strtok_r(line, "\t", &s2); p && n < 6; p = strtok_r(NULL, "\t", &s2)) f[n++] = p;
if (n < 5) continue;
Device *d = &devices[device_count++];
snprintf(d->id, sizeof d->id, "%s", f[0]); snprintf(d->name, sizeof d->name, "%s", f[1]);
d->platform = atoi(f[2]); d->online = atoi(f[3]); d->current = atoi(f[4]);
snprintf(d->thumb, sizeof d->thumb, "%s", n > 5 && f[5][0] == '/' ? f[5] : "");
}
free(copy);
selected = -1;
@@ -714,8 +778,8 @@ static int replace_result;
static gboolean confirm_replace(gpointer d) {
(void)d;
GtkWidget *dialog = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT,
GTK_MESSAGE_QUESTION, GTK_BUTTONS_NONE, "打开后将断开当前与该设备的连接,继续吗?");
gtk_dialog_add_buttons(GTK_DIALOG(dialog), "取消", GTK_RESPONSE_CANCEL, "继续", GTK_RESPONSE_OK, NULL);
GTK_MESSAGE_QUESTION, GTK_BUTTONS_NONE, L("打开后将断开当前与该设备的连接,继续吗?", "Opening this disconnects your current connection to this device. Continue?"));
gtk_dialog_add_buttons(GTK_DIALOG(dialog), L("取消", "Cancel"), GTK_RESPONSE_CANCEL, L("继续", "Continue"), GTK_RESPONSE_OK, NULL);
int accepted = gtk_dialog_run(GTK_DIALOG(dialog)) == GTK_RESPONSE_OK;
gtk_widget_destroy(dialog);
pthread_mutex_lock(&init_lock); replace_result = accepted; pthread_cond_signal(&init_cond); pthread_mutex_unlock(&init_lock);
+299 -39
View File
@@ -1,5 +1,6 @@
/* Native Hyprland/wlroots desktop bridge. Protocol XMLs retain upstream licenses. */
#define _GNU_SOURCE
#include "wayland_transform.h"
#include <wayland-client.h>
#include <xkbcommon/xkbcommon.h>
#include <pthread.h>
@@ -58,6 +59,14 @@ static struct xkb_context *xkb;
static struct xkb_keymap *keymap;
static struct xkb_state *key_state;
static unsigned char held_keys[768];
/* Mobile input-method text (#13/#46). The protocol has no per-key remap request, but
zwp_virtual_keyboard_v1_keymap may be re-sent at any time, so the pristine keymap text is kept
and printable codes on a separate text keyboard carry each batch. Never logs the text. */
#define UU_TEXT_SPARE 32
static char *keymap_text;
static size_t keymap_text_len, keymap_insert;
static xkb_keycode_t spare_codes[UU_TEXT_SPARE];
static unsigned spare_count;
struct output { struct wl_output *handle; char name[128]; int transform,scale; uint32_t width,height; };
static struct output outputs[32];
static unsigned output_count, selected;
@@ -116,6 +125,186 @@ static int sync_display(void) {
if (!ready) wl_callback_destroy(cb);
return result;
}
/* Hand a keymap to the virtual keyboard. The compositor dups the fd, so it is closed here. */
static int upload_keymap(const char *text,size_t length) {
int fd=memfd_create("uuremote-keymap",MFD_CLOEXEC);
if(fd<0) return -1;
if(ftruncate(fd,(off_t)length)!=0 || write(fd,text,length)!=(ssize_t)length) { close(fd); return -1; }
zwp_virtual_keyboard_v1_keymap(keyboard,WL_KEYBOARD_KEYMAP_FORMAT_XKB_V1,fd,(uint32_t)length);
close(fd);
return 0;
}
/* A keymap uploaded to a keyboard the seat already has is never handed to the focused client again,
so pressing the remapped keycodes would still be translated with the keymap it has - which is how
every message came out as the one before it. Re-attaching the keyboard is what makes the
compositor send the keymap to the client (measured 2026-10-18 on Hyprland 0.56.2). */
static int rekey_keyboard(void) {
if(!keyboard_manager || !seat) return -1;
if(keyboard) zwp_virtual_keyboard_v1_destroy(keyboard);
keyboard=zwp_virtual_keyboard_manager_v1_create_virtual_keyboard(keyboard_manager,seat);
return keyboard?0:-1;
}
/* Offset of the '}' that closes the xkb_symbols section, so extra keys can be declared there.
Pairing the braces is enough because the bodies are balanced; looking for the last "};" is not,
the keymap's own brace follows, and an optional xkb_geometry section may too. */
static size_t symbols_close(const char *text) {
const char *section=strstr(text,"xkb_symbols");
if(!section) return 0;
const char *open=strchr(section,'{');
if(!open) return 0;
int depth=0;
for(const char *p=open;*p;p++) {
if(*p=='{') depth++;
else if(*p=='}' && --depth==0) return (size_t)(p-text);
}
return 0;
}
/* Named keycodes the keymap gives no symbol to. Reading the compositor's own list is the only
portable way: pressing an unmapped keycode types nothing, and uu_wl_key never matches one
because it searches by keysym. Highest first, since uu_wl_key takes the lowest match. */
static unsigned find_spare_codes(xkb_keycode_t *out,unsigned limit) {
unsigned count=0;
xkb_keycode_t min=xkb_keymap_min_keycode(keymap);
for(xkb_keycode_t code=xkb_keymap_max_keycode(keymap);code>min && count<limit;code--) {
if(code<8 || code>=sizeof(held_keys) || !xkb_keymap_key_get_name(keymap,code)) continue;
int mapped=0;
for(xkb_level_index_t level=0;level<xkb_keymap_num_levels_for_key(keymap,code,0) && !mapped;level++) {
const xkb_keysym_t *syms;
if(xkb_keymap_key_get_syms_by_level(keymap,code,0,level,&syms)>0) mapped=1;
}
if(!mapped) out[count++]=code;
}
return count;
}
/* A keycode the session keymap already produces this symbol with, unshifted. Typing through it
needs no upload, so no client can mistranslate it - and it is how plain latin text and spaces
arrive without touching the keymap at all. Spares never match: the pristine keymap leaves them
unmapped. */
static xkb_keycode_t existing_keycode(xkb_keysym_t symbol) {
for(xkb_keycode_t code=xkb_keymap_min_keycode(keymap);code<=xkb_keymap_max_keycode(keymap);code++) {
if(code<8 || code>=sizeof(held_keys)) continue;
const xkb_keysym_t *syms;
if(xkb_keymap_key_get_syms_by_level(keymap,code,0,0,&syms)==1 && syms[0]==symbol) return code;
}
return 0;
}
static unsigned find_niri_text_codes(xkb_keycode_t *out,unsigned limit) {
/* Printable physical keys work in Chromium; reserved evdev codes can be discarded. */
static const xkb_keycode_t text_codes[]={24,25,26,27,28,29,30,31,32,33,38,39,40,41,42,43,44,45,46,52,53,54,55,56,57,58};
unsigned count=0;
for(unsigned i=0;i<sizeof(text_codes)/sizeof(text_codes[0]) && count<limit;i++)
if(xkb_keymap_key_get_name(keymap,text_codes[i])) out[count++]=text_codes[i];
return count;
}
static void press_keycode(xkb_keycode_t code) {
zwp_virtual_keyboard_v1_key(keyboard,timestamp(),code-8,WL_KEYBOARD_KEY_STATE_PRESSED);
zwp_virtual_keyboard_v1_key(keyboard,timestamp(),code-8,WL_KEYBOARD_KEY_STATE_RELEASED);
held_keys[code]=0;
}
/* The replaced keyboard starts with nothing held, and a keycode held_keys still calls held would be
skipped by uu_wl_key's next press of it. */
static void release_held_keys_locked(void) {
for(xkb_keycode_t code=xkb_keymap_min_keycode(keymap);code<=xkb_keymap_max_keycode(keymap);code++) {
if(code<8 || code>=sizeof(held_keys) || !held_keys[code]) continue;
zwp_virtual_keyboard_v1_key(keyboard,timestamp(),code-8,WL_KEYBOARD_KEY_STATE_RELEASED);
xkb_state_update_key(key_state,code,XKB_KEY_UP);
}
memset(held_keys,0,sizeof(held_keys));
}
/* Upload one batch: re-attach the keyboard so the client takes the keymap, point spare keycodes at
these symbols, wait for the compositor to install it, then press them. Spares are left out of
key_state and held_keys: pressed and released here. */
static int flush_batch(char *buffer,size_t capacity,const char names[][64],const xkb_keycode_t *codes,unsigned count,int *typed) {
release_held_keys_locked();
if(getenv("NIRI_SOCKET")) {if(sync_display()!=0) return -1;usleep(8000);}
else if(rekey_keyboard()!=0) return -1;
size_t at=keymap_insert;
memcpy(buffer,keymap_text,at);
for(unsigned i=0;i<count;i++) {
int wrote=snprintf(buffer+at,capacity-at,"\tkey <%s> { [ %s ] };\n",xkb_keymap_key_get_name(keymap,codes[i]),names[i]);
if(wrote<0 || (size_t)wrote>=capacity-at) return -1;
at+=(size_t)wrote;
}
memcpy(buffer+at,keymap_text+keymap_insert,keymap_text_len-keymap_insert);
if(upload_keymap(buffer,at+(keymap_text_len-keymap_insert))!=0) return -1;
if(getenv("NIRI_SOCKET")) zwp_virtual_keyboard_v1_modifiers(keyboard,0,0,0,0);
if(sync_display()!=0) return -1;
if(getenv("NIRI_SOCKET")) usleep(8000);
for(unsigned i=0;i<count;i++) { press_keycode(codes[i]); (*typed)++; }
if(getenv("NIRI_SOCKET")) {if(sync_display()!=0) return -1;usleep(8000);}
return 0;
}
/* Type UTF-8 like xdotool type does on X11, but on Wayland: characters the session keymap already
has go out as ordinary keycodes, the rest share the spares of one keymap upload (~70 KB, so one
batch per upload), in text order. Never logs the text. */
static int type_utf8_locked(const char *text) {
size_t capacity=keymap_text_len+(size_t)UU_TEXT_SPARE*96+64;
char *buffer=malloc(capacity);
if(!buffer) return -1;
char names[UU_TEXT_SPARE][64];
xkb_keycode_t codes[UU_TEXT_SPARE];
unsigned count=0;
int typed=0, failed=0;
const unsigned char *p=(const unsigned char *)text;
while(*p && !failed) {
unsigned cp=0; int n=0;
if(*p<0x80) { cp=*p; n=1; }
else if((*p&0xE0)==0xC0 && (p[1]&0xC0)==0x80) { cp=((p[0]&0x1F)<<6)|(p[1]&0x3F); n=2; }
else if((*p&0xF0)==0xE0 && (p[1]&0xC0)==0x80 && (p[2]&0xC0)==0x80) { cp=((p[0]&0x0F)<<12)|((p[1]&0x3F)<<6)|(p[2]&0x3F); n=3; }
else if((*p&0xF8)==0xF0 && (p[1]&0xC0)==0x80 && (p[2]&0xC0)==0x80 && (p[3]&0xC0)==0x80) { cp=((p[0]&0x07)<<18)|((p[1]&0x3F)<<12)|((p[2]&0x3F)<<6)|(p[3]&0x3F); n=4; }
else { p++; continue; }
p+=n;
xkb_keysym_t sym;
if(cp=='\n') sym=0xff0d; /* Return */
else if(cp=='\t') sym=0xff09; /* Tab */
else if(cp<0x20 || cp==0x7f || (cp>=0x80 && cp<0xa0)) continue; /* controls carry no text */
else if(cp<0x100) sym=cp; /* Latin-1 keysyms equal the code point */
else sym=(xkb_keysym_t)(0x1000000|cp); /* Unicode keysym */
xkb_keycode_t existing=getenv("NIRI_SOCKET")?0:existing_keycode(sym);
if(existing) {
if(count && flush_batch(buffer,capacity,names,codes,count,&typed)!=0) { failed=1; break; }
count=0;
press_keycode(existing); typed++;
continue;
}
if(count==(getenv("NIRI_SOCKET")?spare_count:UU_TEXT_SPARE)) {
if(flush_batch(buffer,capacity,names,codes,count,&typed)!=0) { failed=1; break; }
count=0;
}
/* The name is what the keymap parser reads back; an unnamed keysym cannot be spelled. */
if(xkb_keysym_get_name(sym,names[count],sizeof(names[count]))<=0) continue;
codes[count]=spare_codes[count];
count++;
}
if(!failed && count) failed=flush_batch(buffer,capacity,names,codes,count,&typed)!=0;
free(buffer);
/* Restore the pristine keymap whatever happened above, so uu_wl_key keeps its own symbol map. */
if(getenv("NIRI_SOCKET")) {if(sync_display()!=0) return -1;usleep(8000);}
else if(upload_keymap(keymap_text,keymap_text_len)!=0) return -1;
return failed && !typed?-1:typed;
}
int uu_wl_type_utf8(const char *text) {
pthread_mutex_lock(&lock);
int typed=-1;
if(initialized && text && keymap_text && keymap_insert && spare_count) {
if(getenv("NIRI_SOCKET")) {
/* Only niri uses printable codes on a separate text device; preserve the Hyprland path. */
release_held_keys_locked();
struct zwp_virtual_keyboard_v1 *saved=keyboard;
keyboard=zwp_virtual_keyboard_manager_v1_create_virtual_keyboard(keyboard_manager,seat);
if(keyboard) {typed=type_utf8_locked(text);sync_display();usleep(8000);if(keyboard) zwp_virtual_keyboard_v1_destroy(keyboard);}
keyboard=saved;
} else typed=type_utf8_locked(text);
}
if(typed>=0 && wl_display_flush(display)<0) typed=-1;
pthread_mutex_unlock(&lock); return typed;
}
/* Diagnostic: how many characters one keymap upload can carry, 0 when this keymap has no spare. */
int uu_wl_text_ready(void) {
pthread_mutex_lock(&lock);
int ready=initialized && keymap_text && keymap_insert ? (int)spare_count : 0;
pthread_mutex_unlock(&lock); return ready;
}
static void output_geometry(void*d,struct wl_output*o,int32_t x,int32_t y,int32_t w,int32_t h,int32_t sub,const char*m,const char*model,int32_t transform) { ((struct output*)d)->transform=transform; }
static void output_mode(void*d,struct wl_output*o,uint32_t f,int32_t w,int32_t h,int32_t rate) {
if(f&WL_OUTPUT_MODE_CURRENT) { ((struct output*)d)->width=w; ((struct output*)d)->height=h; }
@@ -357,6 +546,7 @@ static void reset(void) {
dmabuf=NULL; dmabuf_requested=dmabuf_disabled=dmabuf_reported=0; dmabuf_linear_formats=0;
pending=0; output_count=0; initialized=0; memset(outputs,0,sizeof(outputs));
memset(held_keys,0,sizeof(held_keys));
free(keymap_text); keymap_text=NULL; keymap_text_len=keymap_insert=0; spare_count=0;
}
int uu_wl_init(int32_t *w,int32_t *h) {
pthread_mutex_lock(&lock);
@@ -368,46 +558,91 @@ int uu_wl_init(int32_t *w,int32_t *h) {
wl_registry_add_listener(registry,&registry_listener,NULL);
if(sync_display()!=0 || sync_display()!=0) goto end;
dma_init();
if(!shm || !seat || !copy_manager || !pointer_manager || !keyboard_manager || !output_count) goto end;
/* wlr-virtual-pointer is an optional input path. When the compositor does not
advertise it, pointer injection is skipped and the caller may drive input
through uinput; screencopy + virtual keyboard are still enough to capture. */
if(!shm || !seat || !copy_manager || !output_count) goto end;
const char *name=getenv("UU_WAYLAND_OUTPUT"); selected=0;
if(name && *name) {
for(selected=0;selected<output_count;selected++) if(!strcmp(outputs[selected].name,name)) break;
if(selected==output_count) goto end;
}
/* Rotated output coordinate mapping needs separate acceptance. */
if(outputs[selected].transform!=WL_OUTPUT_TRANSFORM_NORMAL) goto end;
if(!uu_output_transform_supported(outputs[selected].transform,getenv("NIRI_SOCKET")!=NULL)) goto end;
width=outputs[selected].width; height=outputs[selected].height;
if(outputs[selected].transform&1) {uint32_t t=width;width=height;height=t;}
if(!width || !height || width>16384 || height>16384 || (uint64_t)width*height*4>256*1024*1024) goto end;
if(power_manager) {
power=zwlr_output_power_manager_v1_get_output_power(power_manager,outputs[selected].handle);
zwlr_output_power_v1_add_listener(power,&power_listener,NULL);
}
pointer=zwlr_virtual_pointer_manager_v1_create_virtual_pointer_with_output(pointer_manager,seat,outputs[selected].handle);
keyboard=zwp_virtual_keyboard_manager_v1_create_virtual_keyboard(keyboard_manager,seat);
xkb=xkb_context_new(XKB_CONTEXT_NO_FLAGS);
if(!xkb) goto end;
struct xkb_rule_names names={.layout="us"};
keymap=xkb_keymap_new_from_names(xkb,&names,XKB_KEYMAP_COMPILE_NO_FLAGS);
if(!keymap) goto end;
key_state=xkb_state_new(keymap); if(!key_state) goto end;
char *map=xkb_keymap_get_as_string(keymap,XKB_KEYMAP_FORMAT_TEXT_V1);
if(!map) goto end;
size_t length=strlen(map)+1;
int fd=memfd_create("uuremote-keymap",MFD_CLOEXEC);
if(fd<0) { free(map); goto end; }
if(ftruncate(fd,(off_t)length)!=0 || write(fd,map,length)!=(ssize_t)length) { free(map); close(fd); goto end; }
free(map);
zwp_virtual_keyboard_v1_keymap(keyboard,WL_KEYBOARD_KEYMAP_FORMAT_XKB_V1,fd,length); close(fd);
if(sync_display()!=0) goto end;
if(pointer_manager) pointer=zwlr_virtual_pointer_manager_v1_create_virtual_pointer_with_output(pointer_manager,seat,outputs[selected].handle);
/* Some compositors reject a virtual keyboard from anything that is not their active
input method (Denial does), and a rejected proxy poisons later requests. Allow the
caller to opt out and rely on uinput for key input instead. */
const char *skip_kbd=getenv("UU_WAYLAND_NO_VIRTUAL_KEYBOARD");
if(keyboard_manager && !(skip_kbd && *skip_kbd && strcmp(skip_kbd,"0")))
keyboard=zwp_virtual_keyboard_manager_v1_create_virtual_keyboard(keyboard_manager,seat);
if(keyboard) {
xkb=xkb_context_new(XKB_CONTEXT_NO_FLAGS);
if(!xkb) goto end;
struct xkb_rule_names names={.layout="us"};
keymap=xkb_keymap_new_from_names(xkb,&names,XKB_KEYMAP_COMPILE_NO_FLAGS);
if(!keymap) goto end;
key_state=xkb_state_new(keymap); if(!key_state) goto end;
keymap_text=xkb_keymap_get_as_string(keymap,XKB_KEYMAP_FORMAT_TEXT_V1);
if(!keymap_text) goto end;
keymap_text_len=strlen(keymap_text)+1;
if(upload_keymap(keymap_text,keymap_text_len)!=0) goto end;
if(sync_display()!=0) goto end;
/* Text typing needs unmapped keycodes and a place to declare them. A keymap without either
only costs that path - uu_wl_type_utf8 refuses and the caller keeps its own fallback. */
keymap_insert=symbols_close(keymap_text);
spare_count=getenv("NIRI_SOCKET")?find_niri_text_codes(spare_codes,UU_TEXT_SPARE):find_spare_codes(spare_codes,UU_TEXT_SPARE);
}
initialized=1; *w=width; *h=height; result=0;
end:
if(result!=0) reset();
pthread_mutex_unlock(&lock); return result;
}
/* Switch the pointer binding and main-process capture atomically; encoder subprocesses
select their own output via UU_WAYLAND_OUTPUT. Keyboard identity stays unchanged. */
int uu_wl_select_output(const char *name,uint32_t expected_w,uint32_t expected_h) {
pthread_mutex_lock(&lock); int result=-1;
if(!initialized || !name || sync_display()!=0) goto end;
unsigned target;
for(target=0;target<output_count;target++) if(!strcmp(outputs[target].name,name)) break;
if(target==output_count || !uu_output_transform_supported(outputs[target].transform,getenv("NIRI_SOCKET")!=NULL)) goto end;
uint32_t w=outputs[target].width,h=outputs[target].height;
if(outputs[target].transform&1) {uint32_t t=w;w=h;h=t;}
if(w!=expected_w || h!=expected_h || !w || !h || w>16384 || h>16384 || (uint64_t)w*h*4>256*1024*1024) goto end;
struct zwlr_virtual_pointer_v1 *next=NULL;
if(pointer_manager) {
next=zwlr_virtual_pointer_manager_v1_create_virtual_pointer_with_output(pointer_manager,seat,outputs[target].handle);
if(!next) goto end;
if(sync_display()!=0) {zwlr_virtual_pointer_v1_destroy(next);goto end;}
}
for(unsigned i=0;i<2;i++) { frame_clear(&frames[i]); dma_clear(&frames[i]); shm_clear(&frames[i]); }
pending=0;
if(pointer) zwlr_virtual_pointer_v1_destroy(pointer);
pointer=next; selected=target; width=w; height=h;
if(power) { zwlr_output_power_v1_destroy(power); power=NULL; }
power_failed=0;
if(power_manager) {
power=zwlr_output_power_manager_v1_get_output_power(power_manager,outputs[selected].handle);
zwlr_output_power_v1_add_listener(power,&power_listener,NULL);
}
result=0;
end:
pthread_mutex_unlock(&lock); return result;
}
int uu_wl_wake(void) {
pthread_mutex_lock(&lock); int result=-1;
/* Output power management is optional; missing it must not block screencopy. */
if(initialized && !power) result=0;
if(initialized && (!power || power_failed)) {
/* No power manager, or the compositor refused the mode (outputs without DPMS,
headless outputs): streaming continues, the screen simply stays as it is. */
result=0;
}
if(initialized && power && !power_failed) {
zwlr_output_power_v1_set_mode(power,ZWLR_OUTPUT_POWER_V1_MODE_ON);
if(sync_display()==0 && !power_failed) result=0;
@@ -429,7 +664,7 @@ retry:;
for(unsigned i=0;i<2;i++) { frame_clear(&frames[i]); dma_clear(&frames[i]); }
pending=0; goto retry;
}
if(frame->failed || !frame->pixels || frame->width!=width || frame->height!=height) goto end;
if(frame->failed || !frame->pixels || frame->width!=outputs[selected].width || frame->height!=outputs[selected].height) goto end;
zwlr_screencopy_frame_v1_destroy(frame->handle); frame->handle=NULL;
const char *pipeline=getenv("UU_WAYLAND_PIPELINE");
if(!pipeline || strcmp(pipeline,"0")) {
@@ -440,11 +675,22 @@ retry:;
}
{
for(uint32_t y=0;y<height;y++) {
uint32_t source=(frame->flags&ZWLR_SCREENCOPY_FRAME_V1_FLAGS_Y_INVERT)?height-y-1:y;
uint8_t *row=out+(size_t)y*width*4;
memcpy(row,(uint8_t*)frame->pixels+(size_t)source*frame->stride,width*4);
if(frame->format==WL_SHM_FORMAT_XBGR8888 || frame->format==WL_SHM_FORMAT_ABGR8888) {
for(uint32_t x=0;x<width;x++) { uint8_t red=row[x*4]; row[x*4]=row[x*4+2]; row[x*4+2]=red; }
if(outputs[selected].transform==WL_OUTPUT_TRANSFORM_NORMAL &&
frame->format!=WL_SHM_FORMAT_XBGR8888 && frame->format!=WL_SHM_FORMAT_ABGR8888) {
uint32_t sy=(frame->flags&ZWLR_SCREENCOPY_FRAME_V1_FLAGS_Y_INVERT)?height-1-y:y;
memcpy(row,(uint8_t*)frame->pixels+(size_t)sy*frame->stride,width*4);
continue;
}
for(uint32_t x=0;x<width;x++) {
uint32_t sx=x,sy=y,sw=frame->width,sh=frame->height;
uu_source_pixel(outputs[selected].transform,sw,sh,x,y,&sx,&sy);
if(frame->flags&ZWLR_SCREENCOPY_FRAME_V1_FLAGS_Y_INVERT) sy=sh-1-sy;
const uint8_t *pixel=(uint8_t*)frame->pixels+(size_t)sy*frame->stride+sx*4;
memcpy(row+x*4,pixel,4);
if(frame->format==WL_SHM_FORMAT_XBGR8888 || frame->format==WL_SHM_FORMAT_ABGR8888) {
row[x*4]=pixel[2];row[x*4+2]=pixel[0];
}
}
}
result=0;
@@ -456,13 +702,21 @@ end:
}
int uu_wl_move(int32_t x,int32_t y,int relative) {
pthread_mutex_lock(&lock); int result=-1;
/* -2: no virtual pointer at all, so the caller may use uinput; -1 stays a real failure. */
if(initialized && !pointer) { result=-2; goto end; }
if(initialized) {
if(relative) {
/* UU reports pixels (source DPR=1); Wayland motion is in logical points. */
double scale=outputs[selected].scale;
zwlr_virtual_pointer_v1_motion(pointer,timestamp(),wl_fixed_from_double(x/scale),wl_fixed_from_double(y/scale));
}
else if(x>=0 && y>=0 && x<(int32_t)width && y<(int32_t)height) zwlr_virtual_pointer_v1_motion_absolute(pointer,timestamp(),x,y,width,height);
else if(x>=0 && y>=0 && x<(int32_t)width && y<(int32_t)height) {
uint32_t sx,sy,sw=outputs[selected].width,sh=outputs[selected].height;
/* niri/Smithay applies the output transform to absolute device coordinates. */
if(getenv("NIRI_SOCKET")) uu_source_pixel(outputs[selected].transform,sw,sh,x,y,&sx,&sy);
else {sx=x;sy=y;sw=width;sh=height;}
zwlr_virtual_pointer_v1_motion_absolute(pointer,timestamp(),sx,sy,sw,sh);
}
else goto end;
zwlr_virtual_pointer_v1_frame(pointer); result=wl_display_flush(display)<0?-1:0;
}
@@ -470,6 +724,7 @@ end: pthread_mutex_unlock(&lock); return result;
}
int uu_wl_button(int button,int pressed) {
pthread_mutex_lock(&lock); int result=-1;
if(initialized && !pointer) { goto end; } /* no virtual pointer: report failure so the caller falls back to uinput */
if(initialized) {
if(button>=4 && button<=7) {
if(pressed) {
@@ -489,6 +744,7 @@ end: pthread_mutex_unlock(&lock); return result;
}
int uu_wl_key(uint64_t symbol,int pressed) {
pthread_mutex_lock(&lock); int result=-1;
if(initialized && !keyboard) { pthread_mutex_unlock(&lock); return -1; } /* no virtual keyboard: caller falls back to uinput */
if(initialized) {
for(xkb_keycode_t code=xkb_keymap_min_keycode(keymap);code<=xkb_keymap_max_keycode(keymap);code++) {
int matches=0;
@@ -519,20 +775,24 @@ int uu_wl_release_all(void) {
if(initialized) {
/* Sweep this client's virtual keyboard directly: a keysym lookup can
fail for unmapped OEM/keypad symbols before reaching held modifiers. */
for(xkb_keycode_t code=xkb_keymap_min_keycode(keymap);code<=xkb_keymap_max_keycode(keymap);code++) {
if(code<8 || code>=sizeof(held_keys) || !xkb_keymap_key_get_name(keymap,code)) continue;
zwp_virtual_keyboard_v1_key(keyboard,timestamp(),code-8,WL_KEYBOARD_KEY_STATE_RELEASED);
if(held_keys[code]) xkb_state_update_key(key_state,code,XKB_KEY_UP);
if(keyboard) {
for(xkb_keycode_t code=xkb_keymap_min_keycode(keymap);code<=xkb_keymap_max_keycode(keymap);code++) {
if(code<8 || code>=sizeof(held_keys) || !xkb_keymap_key_get_name(keymap,code)) continue;
zwp_virtual_keyboard_v1_key(keyboard,timestamp(),code-8,WL_KEYBOARD_KEY_STATE_RELEASED);
if(held_keys[code]) xkb_state_update_key(key_state,code,XKB_KEY_UP);
}
zwp_virtual_keyboard_v1_modifiers(keyboard,
xkb_state_serialize_mods(key_state,XKB_STATE_MODS_DEPRESSED),
xkb_state_serialize_mods(key_state,XKB_STATE_MODS_LATCHED),
xkb_state_serialize_mods(key_state,XKB_STATE_MODS_LOCKED),
xkb_state_serialize_layout(key_state,XKB_STATE_LAYOUT_EFFECTIVE));
}
memset(held_keys,0,sizeof(held_keys));
zwp_virtual_keyboard_v1_modifiers(keyboard,
xkb_state_serialize_mods(key_state,XKB_STATE_MODS_DEPRESSED),
xkb_state_serialize_mods(key_state,XKB_STATE_MODS_LATCHED),
xkb_state_serialize_mods(key_state,XKB_STATE_MODS_LOCKED),
xkb_state_serialize_layout(key_state,XKB_STATE_LAYOUT_EFFECTIVE));
for(unsigned code=0x110;code<=0x114;code++)
zwlr_virtual_pointer_v1_button(pointer,timestamp(),code,WL_POINTER_BUTTON_STATE_RELEASED);
zwlr_virtual_pointer_v1_frame(pointer);
if(pointer) {
for(unsigned code=0x110;code<=0x114;code++)
zwlr_virtual_pointer_v1_button(pointer,timestamp(),code,WL_POINTER_BUTTON_STATE_RELEASED);
zwlr_virtual_pointer_v1_frame(pointer);
}
result=wl_display_flush(display)<0?-1:0;
}
pthread_mutex_unlock(&lock);return result;
+14
View File
@@ -0,0 +1,14 @@
#include <stdint.h>
/* Map upright output pixels to untransformed capture/device coordinates (Smithay Transform). */
static inline void uu_source_pixel(int transform,uint32_t w,uint32_t h,uint32_t x,uint32_t y,uint32_t *sx,uint32_t *sy) {
*sx=x;*sy=y;
switch(transform) {
case 1:*sx=y;*sy=h-1-x;break;
case 2:*sx=w-1-x;*sy=h-1-y;break;
case 3:*sx=w-1-y;*sy=x;break;
}
}
/* Rotated capture and pointer mapping have hardware acceptance only on niri. */
static inline int uu_output_transform_supported(int transform,int niri) {
return transform==0 || (niri && transform>=1 && transform<=3);
}
+17 -2
View File
@@ -56,6 +56,15 @@ static void track_injected_key(int keycode, int is_press) {
}
}
/* XShmAttach fails asynchronously (BadAccess when the X server cannot reach our segment, e.g. a
* server in another container); Xlib's default handler would exit the process before the XGetImage fallback. */
static volatile int g_shm_attach_failed = 0;
static int shm_attach_error(Display *display, XErrorEvent *event) {
(void)display; (void)event;
g_shm_attach_failed = 1;
return 0;
}
static void shm_open_image(void) {
g_use_shm = 0;
if (!XShmQueryExtension(g_display)) return;
@@ -66,9 +75,15 @@ static void shm_open_image(void) {
if (g_shminfo.shmid == -1) return;
g_shminfo.shmaddr = g_shm_image->data = (char *)shmat(g_shminfo.shmid, 0, 0);
g_shminfo.readOnly = False;
if (g_shminfo.shmaddr != (char *)-1 && XShmAttach(g_display, &g_shminfo)) {
if (g_shminfo.shmaddr != (char *)-1) {
XSync(g_display, False);
g_use_shm = 1;
g_shm_attach_failed = 0;
int (*previous)(Display *, XErrorEvent *) = XSetErrorHandler(shm_attach_error);
Status attached = XShmAttach(g_display, &g_shminfo);
XSync(g_display, False);
XSetErrorHandler(previous);
if (attached && !g_shm_attach_failed) g_use_shm = 1;
else fprintf(stderr, "X11 shared-memory capture unavailable; using XGetImage\n");
}
shmctl(g_shminfo.shmid, IPC_RMID, 0); // 标记删除,进程退出时自动回收;失败时也不遗留段
}
@@ -0,0 +1,14 @@
[Desktop Entry]
Type=Application
Name=UU 远程 Linux 控制端
Name[en]=UU Remote Linux Viewer
GenericName=Remote desktop viewer
Comment=非官方 UU 远程控制端(实验性):远控你的 Windows / Mac / Linux 设备
Comment[en]=Unofficial NetEase UU Remote viewer (experimental)
Exec=uuremote-viewer ui
Icon=uu-remote-linux
Terminal=false
Categories=Network;RemoteAccess;
Keywords=remote;desktop;viewer;UU;远程;控制;
StartupNotify=false
StartupWMClass=uuremote-viewer
+2
View File
@@ -11,3 +11,5 @@ Terminal=false
Categories=Network;RemoteAccess;
Keywords=remote;assist;UU;远程;协助;
StartupNotify=false
# Matches the GTK window class so docks/taskbars show this icon for the host window (#13).
StartupWMClass=uu-remote-linux
+1 -1
View File
@@ -1,7 +1,7 @@
# Unofficial UU Remote Linux host in a container, for NAS boxes (Synology DSM, etc.) without a desktop.
# Headless mode: file transfer, terminal and port mapping; no remote desktop. Uses the published release binary.
FROM ubuntu:24.04
ARG VERSION=v0.2.9
ARG VERSION=v0.2.20
LABEL org.opencontainers.image.source="https://github.com/VallierDev/uu-remote-linux" \
org.opencontainers.image.description="Unofficial UU Remote Linux host, headless (file transfer, terminal, port mapping)" \
org.opencontainers.image.licenses="GPL-3.0"
+103
View File
@@ -0,0 +1,103 @@
# UU native gamepad experiment / 原生手柄实验
Status: experimental and default OFF; opt in with `UU_VIEWER_NATIVE_GAMEPAD=1`.
One reporting user tested input, phone-hotspot WAN, reconnect and rumble on one
Windows/Steam Deck pair; the upstream maintainer has not independently tested it.
This does not establish compatibility with every official UU version.
## Evidence (2026-10-31)
Official Windows installer 4.45.0.4318, obtained from NetEase's release endpoint
`https://api.nrd.nie.163.com/api/v1/release/dl/1?channel=gwqd`.
Only inspected locally; no NetEase binaries/assets are included in this project or deliverable.
- `GameViewerServer.exe` SHA256 `af3a15c3887e06bfa9506971e01cd8ec58f41efe8ac9eb5831e31dae1fc1cef8`
- `GameViewer.exe` SHA256 `ef7112e173cdc6d74735c50292cf9750082ce351cdea60dc068fc2b60f3aa92e`
- All addresses below are RVAs, not absolute process addresses. Image base is 0x140000000.
- Lead: https://github.com/djkcyl/uu-enhance/blob/main/src/hooks.cpp identifies older
GamepadManager Connect/Disconnect/Update log strings. Its server.cpp identifies corresponding
GamepadManagerServer handlers. No hook code or DLL injection is used here.
Receiver static inspection:
| RVA | Observation |
| --- | --- |
| 0x5dea50 | Raw JSON handler skips heartbeat messages, reads `action`, routes prefix `gpd_` to dispatcher through thunk 0x657d0. |
| 0x5dde60 | Dispatcher recognizes `gpd_update`, `gpd_connect`, `gpd_disconnect`. Connect/disconnect read `index` as a byte. |
| 0x5ddb30 | State decoder requires `index`, `buttons`, `left_trigger`, `right_trigger`, `left_thumb_x`, `left_thumb_y`, `right_thumb_x`, `right_thumb_y`. |
| 0x5dfba0 | ViGEm output: low 16 bits of buttons, two 8-bit triggers and four 16-bit stick values copied into an XUSB report; target selected by index. Missing target attempts auto-connect; missing driver drops updates. |
| 0x5df5d0 | Vibration JSON builder: `action: gpd_vibration`, `index`, `left_motor`, `right_motor`; all three numeric values read as bytes. |
| 0x5dfe80 | ViGEm feedback callback constructs index/left/right byte record, calls vibration serializer, then 0x5df580 (via thunk 0x1c1e3) to forward JSON through its session interface. |
Official viewer corroboration:
- 0x10369d0 builds JSON object with `action: gpd_connect`, numeric `index`.
- 0x1036d20 builds disconnect object.
- 0x1037070 builds update object using exactly the receiver fields above, unsigned numeric
buttons/index/triggers and signed thumb values.
- Viewer 0xc1c630 dispatches raw JSON action `gpd_vibration` alongside cursor notifications.
Viewer 0x10331a0 parses index/left_motor/right_motor into three bytes.
This supports sending JSON through the existing binary CONTROL input path (`Peer::send_input`),
with input reported working by the reporting user on their Windows/Deck pair.
No guessed new protobuf feature flags are advertised. Existing desktop negotiation is retained.
## Implementation and limits
`src/viewer/native_gamepad.rs` reads a single SDL GameController inside the desktop viewer.
It maps SDL buttons to XInput and reverses Y axes (including -32768 saturation), converts triggers
0..32767 to 0..255, uses slot 0, sends changes and a 100 ms state refresh. Guide button is omitted.
More than one mapped controller at discovery is deliberately ambiguous and none is opened.
Focus loss, local control menu, view-only, unplug or normal shutdown: send neutral then disconnect.
On entry/re-entry, require released buttons/triggers/sticks before arming. Back+Start toggles pause.
Normal cleanup uses bounded send attempts. Host behavior after SIGKILL/network loss remains
unverified; no host-side input watchdog interval has been established.
Very short taps entirely between SDL samples can be missed. Multi-controller is not implemented.
Logged markers describe local activity only; CONNECT_QUEUED is not an ACK.
## Rumble / 震动回传
`native_rumble.rs` parses the verified flat JSON `{action:"gpd_vibration",index:0,left_motor:0..255,right_motor:0..255}`
on the existing peer's CONTROL channel. It rejects malformed/duplicate fields, wrong types/ranges,
nonzero slot and messages over 512 bytes. The exact shape is backed by static inspection; receipt
on the CONTROL hook must still be verified on other Windows/Deck configurations; the reporting user has reported successful rumble on their pair.
Only the current focused, armed SDL controller enables its peer-local inbox; a single latest-value slot
prevents a backlog from replaying after a pause. Feedback for inactive sessions is discarded.
Motor strength scales by 257 into SDL's 0..65535 range. SDL `set_rumble` receives left/low-frequency
and right/high-frequency values. Normal zero feedback stops immediately. Sustained rumble refreshes
every 250 ms with a finite 1000 ms hardware effect, because the host may send only state changes.
An active viewer keeps the last desired state until a new message or focus/connection/pause change;
there is no unsupported assumption that a quiet host must periodically repeat feedback.
Pending nonzero commands older than 500 ms are discarded; stop commands are always honored.
Pause, focus loss, view-only, unplug, detected peer disconnection and normal exit stop rumble and
discard the queue. A blocked/crashed viewer cannot keep renewing the 1000 ms SDL effect. Physical
network loss detection still depends on WebRTC; this is not a one-second network watchdog.
Output failure disables rumble until controller rediscovery/restart while preserving input.
SDL API reference: https://wiki.libsdl.org/SDL2/SDL_GameControllerRumble . A successful SDL call
does not prove the hardware moved. Steam Input/SteamOS rumble configuration and physical Deck
feedback remain dependent on each installation. This implements ordinary two-motor rumble, not adaptive
triggers or arbitrary touchpad haptic waveforms. `UU_VIEWER_NATIVE_RUMBLE=0` disables feedback.
Markers (no payload values): RUMBLE_SUPPORTED/UNAVAILABLE describe SDL capabilities;
RUMBLE_RECEIVED means a valid active-session message arrived; RUMBLE_APPLIED means SDL returned
success for a nonzero effect; RUMBLE_OUTPUT_FAILED means the output API failed. All have DECKPAD_ prefix.
## Validation / 验证
Use the CI checks on the current PR head as the automated validation record.
The tests cover protocol fields and ranges, activation/release gating, bounded
feedback delivery, finite rumble effects and shared CONTROL delivery alongside
file operations. Automated tests do not exercise physical controller feedback
or establish official-host compatibility.
自动验证以当前 PR 提交的 CI 结果为准;实机结果来自报告用户,不能视为上游维护者
已验收,也不涵盖全部主机版本、休眠、强制退出和断网恢复场景。
## Attribution / AI assistance
The native gamepad and rumble implementation, regression tests and this evidence document were
prepared with OpenAI Codex assistance. The user supplied requirements and reported the hardware
acceptance results. Existing project design, code and attribution belong to the upstream contributors.
Binary file not shown.

After

Width:  |  Height:  |  Size: 50 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 51 KiB

+152
View File
@@ -0,0 +1,152 @@
# 实验性防窥 / Experimental privacy screen
仅支持 KDE Plasma Wayland(portal 后端)。开启后,采集和输入切换到 KWin 虚拟输出
(portal ScreenCast 的 VIRTUAL 源),再用 `kscreen-doctor` 禁用物理屏;远程操作不会点亮
本机屏幕。关闭、最后一个桌面连接断开或正常退出时,先重新启用物理屏,再结束虚拟输出、切回物理屏采集。
顺序参考 KRdp 虚拟显示器的 replace 策略和 Sunshine 的 KDE 方案:创建虚拟输出前记录物理屏,
从不禁用虚拟输出本身(KWin bug 527747)。GNOME、其他 Wayland 桌面和 X11 不支持。
壁纸模式:窗口随物理屏禁用迁到虚拟输出后,重新启用物理屏,把虚拟输出设为主屏、用 KWin 脚本把窗口
留在虚拟输出上,再由 `privacy-wallpaper` 子进程在每块物理屏上全屏置顶显示 Plasma 当前桌面壁纸和
“此设备正在被远程控制”。物理屏开着时 uinput 绝对坐标覆盖整个布局,主机按虚拟输出在布局中的位置换算。
需要 GTK3。
KDE Plasma Wayland only (portal backend). Enabling moves capture and input to a KWin virtual
output (portal ScreenCast VIRTUAL source) and disables the physical outputs with `kscreen-doctor`,
so remote input cannot wake them. Disabling, the last desktop disconnect or a normal exit re-enables
the physical outputs first, then ends the virtual share and returns to the monitor. Physical outputs
are recorded before the virtual one exists; the virtual output itself is never disabled (KWin bug
527747). GNOME, other Wayland desktops and X11 are unsupported.
Wallpaper mode: after the windows have moved to the virtual output, the physical outputs are turned
back on as secondary outputs, a KWin script keeps the windows on the virtual one, and the
`privacy-wallpaper` child process covers each physical output with Plasma's desktop wallpaper and a
notice (fullscreen, keep-above). uinput's absolute axes then span the whole layout, so pointer input
is aimed at the virtual output's region. Needs GTK3.
注意 / Notes:
- 虚拟屏分辨率由 KDE 决定(默认 1920x1080,首次可能在本机弹窗选择,之后沿用保存的授权
`portal-permissions/kde-virtual`)。窗口会被 KWin 移到虚拟屏,恢复后位置可能变化。
The virtual size is KDE's (1920x1080 by default; the first share may ask on the host, later ones
reuse `portal-permissions/kde-virtual`). KWin moves windows to it; positions may change on restore.
- KDE 不处理虚拟输出共享上的 portal 输入,防窥期间指针、按键和文字改走 uinput(需要 `/dev/uinput`
权限,见 README);手机拖动手势在此期间按普通鼠标拖动处理。
KDE ignores portal input on a virtual-output share, so pointer, keys and text use uinput while the
privacy screen is on (`/dev/uinput` access required); mobile drag gestures act as plain mouse drags.
- 开启期间通过 KWin 的 InputDevice 接口禁用本地键盘、鼠标、触摸板和触摸屏(含手势守护进程、ydotoold
等由本机驱动的虚拟设备),保留电源键、合盖开关和主机自己的 uinput 设备;`UU_PRIVACY_BLOCK_INPUT=0` 关闭此项。
KWin 会保存设备开关,所以主机另起 `privacy-guard` 子进程:主机以任何方式结束(包括 SIGKILL)都会按恢复记录
重新启用设备和物理屏;下次启动也会重试。防窥期间新插入的设备不会被禁用。
While on, local keyboards, pointers, touchpads and touchscreens are disabled through KWin's
InputDevice interface (including software devices fed by local hardware such as gesture daemons and
ydotoold); the power button, lid switch and the host's own uinput devices stay. Set
`UU_PRIVACY_BLOCK_INPUT=0` to keep local input. KWin saves the device flag, so a `privacy-guard`
child restores devices and outputs from the record whenever the host ends, including SIGKILL; the
next start retries too. Devices plugged in during privacy are not blocked.
- 这是尽力而为的遮挡,不是保密边界。/ This is best-effort obscuring, not a confidentiality boundary.
- 恢复记录保存在配置文件旁的 `privacy-power.json`(0600);崩溃后下次启动重新启用记录的物理屏。
若主机无法启动,可在本机终端执行 `kscreen-doctor output.<name>.enable`。
The recovery record `privacy-power.json` (0600) re-enables the recorded outputs at the next start
after a crash; manually: `kscreen-doctor output.<name>.enable`.
- 需要 coreutils `timeout`、`gdbus` 和可用的 uinput(`/dev/uinput` 可写,且未设 `UU_INPUT_BACKEND=native`);
缺少时请求在改动屏幕和设备之前被拒绝。隐私模式的遮挡窗口建好后才算开启,失败即回滚。
Requires coreutils `timeout`, `gdbus` and working uinput (`/dev/uinput` writable, not
`UU_INPUT_BACKEND=native`); otherwise the request is refused before outputs or devices change.
Picture mode counts as on only after the cover window reports ready; a failure rolls back.
## 协议 / Protocol
字段号来自官方 Mac 客户端的 SwiftProtobuf name map / Field numbers from the Mac UURemote name maps:
- RPC 7 `PrivateScreenSettingRequest {1 enable, 2 privacy_type, 3 setting_source}` → RpcResponse 3
`{1 error_code, 2 req_privacy_type, 3 cur_privacy_type}`;PrivateScreenType 2 隐私/picture, 3 关屏/screen off。
主机先应答再切换(客户端约数秒超时,报 9998);切换失败发 ReportError -7。
The host answers before switching (the viewer times out with 9998); a failed switch sends ReportError -7.
成功不发送 ReportError;Mac 4.43.0 的 -9 是系统会话变化提示,不是防窥成功通知。
Success does not send ReportError; -9 in Mac 4.43.0 reports a system session change, not privacy success.
- RPC 25 `update_screen_saver_req` → RpcResponse 21:开启隐私模式前发送,主机回空成功应答,画面仍用本机壁纸。
Sent before picture mode; answered empty (success), the host keeps its own wallpaper.
- FeatureFlag 4 `ff_private_screen` = 2 (ENHANCED_PRIVACY);SettingMetric 4 `private_screen`、7 `private_screen_type`
上报当前实际模式(1 关闭、2 屏保、3 关屏),不使用 host_settings.json 中的历史选项;SystemStateChange 5
`PrivateScreenState` 在状态变化时推送。
SettingMetric 4/7 report the effective mode (1 off, 2 picture, 3 screen off), not the saved preference;
SystemStateChange 5 is sent after a switch.
Mac 4.43.0 从 CONTROL 发送请求,但只在 TEXT 接收分支处理上述 RPC 应答与 SystemMetrics。
防窥与屏保应答走 TEXT;SystemMetrics 同步发送到 TEXT,并保留 CONTROL 上报以兼容其他客户端。
每个 peer 独立排队,TEXT 打开后才发送;待发 SystemMetrics 只保留最新一条,其他应答最多 64 条,
按入队顺序发送。满队列时丢弃新增应答并记录一次警告,不阻塞 CONTROL 请求处理。
SystemMetrics 优先读取非零的 field 7,仅在其为 0 时回退
到 field 4。SystemMetrics field 1 `metrics` 必须列出本次报告的类型(general=1、setting=2),
否则客户端直接忽略消息内容。已用原签名 Mac 4.43.0 客户端验证三种模式的安全浮层回显,
关屏后断开恢复物理屏与输入设备,再次连接回显“不启用”。
Mac 4.43.0 sends requests on CONTROL, but handles these RPC responses and SystemMetrics only on TEXT.
Privacy/screensaver replies use TEXT; SystemMetrics are also sent on TEXT, retaining CONTROL for other
viewers. Each peer queues messages until its TEXT channel opens, retaining only the latest pending
SystemMetrics and up to 64 other replies in FIFO order. Excess replies are dropped with one warning
per peer, without blocking CONTROL request handling. Nonzero field 7 takes precedence over
field 4. SystemMetrics field 1 `metrics` must list the reported sections (general=1, setting=2), or the
viewer ignores the payload. The original signed Mac 4.43.0 viewer was verified for all three labels,
physical-screen/input restoration on disconnect, and an off label after reconnecting.
官方主机侧依据:原签名 Mac `UURemoteServer` 4.43.0(626),arm64 UUID
`7E10CB24-F516-3728-8375-BA5EC124A2C5`。`SystemMetricsHandler.handleSystemMetrics`(`0x10000a96c`)
按请求填充各节,general 分支在 `0x10000abe8` 追加 `1`,setting helper(`0x10000a230`)
在 `0x10000a64c` 追加 `2`;`GvPb_SystemMetrics.traverse`(`0x100423840`)将列表按 packed enum
写入 field 1。发送链 `0x10000b11c → 0x10018e948 → ControlledSendTextData:data:` 使用 TEXT。
这是静态主机代码依据:请求 general 和 setting 时得到 `[1,2]`,不是抓包,也不表示每条响应都固定
包含两节或证明官方 CONTROL 报文。本实现总是报告两节,因此列出 `[1,2]`。
Official host evidence: the original signed Mac `UURemoteServer` 4.43.0 (626), arm64 UUID
`7E10CB24-F516-3728-8375-BA5EC124A2C5`. `SystemMetricsHandler.handleSystemMetrics` (`0x10000a96c`)
fills the requested sections, appending GENERAL=1 at `0x10000abe8` and SETTING=2 at `0x10000a64c`
in helper `0x10000a230`. `GvPb_SystemMetrics.traverse` (`0x100423840`) encodes that list as packed
field 1. The send chain `0x10000b11c → 0x10018e948 → ControlledSendTextData:data:` uses TEXT.
This is static host-code evidence: requesting both sections produces `[1,2]`; it is not a packet
capture or proof that every response includes both sections or that the official host sends it on
CONTROL. Our payload always reports both sections, so it lists `[1,2]`.
Android 4.43.0 已确认打开 TEXT;主机日志和手机端人工验收确认,关屏、隐私屏保、取消三种操作的
实际模式与菜单选中状态均正确。Windows/iOS 未在本轮验收。
Android 4.43.0 opens TEXT; host logs and manual phone-side acceptance confirmed that screen-off,
picture and off operations update both the effective mode and the selected menu item.
Windows/iOS were not tested in this round.
## 本机诊断 / Local diagnostic
禁用物理屏 5 秒后恢复,不登录、不启动第二个主机;先停止使用同一配置目录的主机。
Disables the physical outputs for five seconds, then restores them. Stop the host first.
```sh
cargo build --locked --features wayland,portal --bin uuremote-server
target/debug/uuremote-server privacy-screen-probe
UU_PRIVACY_PROBE_WALLPAPER=1 target/debug/uuremote-server privacy-screen-probe # 壁纸模式 / wallpaper mode
```
## 代码结构 / Code layout
`src/privacy_screen/` 分两层:与桌面无关的控制器和共享部件,以及每种桌面一个后端。
The module has a desktop-independent controller with shared parts, and one backend per desktop.
| 文件 / File | 职责 / Responsibility |
|---|---|
| `mod.rs` | 控制器:桌面会话计数、模式切换(先恢复再进入)、失败回滚、崩溃恢复、probe / controller: sessions, mode switch (leave, then enter), rollback, crash recovery, probe |
| `mode.rs` | `Mode { Picture, ScreenOff }` ↔ 协议 `privacy_type` 1 关 / 2 隐私 / 3 关屏 |
| `protocol.rs` | RPC 7 请求解析与 RpcResponse 3 编码 / request parsing and response encoding |
| `backend.rs` | `Backend` trait 与按桌面选择后端 / the trait and backend selection |
| `record.rs` | 恢复记录 `{backend, mode, data}`、进程锁、`Journal` / recovery record, process lock, journal |
| `guard.rs` | `privacy-guard` 子进程:主机以任何方式结束都按记录恢复 / restores from the record however the host ends |
| `cover.rs` | `privacy-wallpaper` 子进程:GTK 全屏遮挡窗口 / GTK cover window process |
| `tool.rs` | 带超时的外部命令、gdbus、等待生效 / bounded tool calls, gdbus, wait-until |
| `kde/` | KDE 后端:`outputs.rs` kscreen-doctor 布局,`input.rs` KWin 输入设备,`kwin.rs` KWin 脚本,`mod.rs` 编排 |
新增桌面(X11、GNOME…)只需实现 `Backend` 并在 `backend::detect` / `backend::named` 登记:
`enter` 在每一步改动之前通过 `Journal::save` 写入足以撤销它的数据;`leave` 只依据这些数据撤销,
因为崩溃恢复时(守护进程或下次启动)没有桌面视频流。Picture 模式可复用 `cover::show`;
若物理屏保持开启而 uinput 坐标覆盖整个布局,返回 `Entered::pointer_region`。
To add a desktop (X11, GNOME, ...), implement `Backend` and register it in `backend::detect` and
`backend::named`. `enter` saves, through `Journal::save`, what undoes each step before making it;
`leave` must undo from that data alone, because crash recovery (guard or next start) has no
desktop stream. Picture mode can reuse `cover::show`; when physical outputs stay on and uinput's
axes span the whole layout, return `Entered::pointer_region`.
+18
View File
@@ -0,0 +1,18 @@
修复 iPhone 上「超清 / 原画」「常规 / 真彩」点不动。/ Fix iPhone quality and chroma choices being locked.
### 修复 / Fixed
- **iPhone 无法切换画质与真彩**(#49,感谢 @RiverOnVenus 的细致排查):连接本项目主机时,iPhone 的「超清」「原画」
以及「常规 / 真彩」按钮点了没反应,只有帧率能改。原因是主机发出的设备能力消息(`forward_setting` 的 `device_capability`)
格式与官方 Windows 被控端不一致,iPhone 无法识别,于是锁定在默认值。现在按官方格式发送设备能力(含 4:4:4 等真实支持的格式),
并补发发送参数 `sender_para_info`。
已实测:iPhone(UU 远程 4.42.0)连接修复后的主机,可以切换画质(主机收到新的画质请求)。Mac 客户端不依赖这条消息,此前即正常。
- Device capability is now sent in the official nested shape (and `sender_para_info` is added), so the iPhone client unlocks
quality and chroma choices. Verified with the UU iPhone app 4.42.0.
### 其他 / Other
- 控制端窗口与主机使用同一图标,并新增控制端启动项 `contrib/desktop/uu-remote-linux-viewer.desktop`(#13)。
### 下载 / Download
`uu-remote-linux-v0.2.10-x86_64-linux.tar.gz`(主机 `uuremote-server` + 控制端 `uuremote-viewer`,附带 `contrib/`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.10`。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+20
View File
@@ -0,0 +1,20 @@
Wayland(wlroots)手机输入法上屏;登录默认直连,不走环境代理。/ Mobile IME text on wlroots Wayland; cloud API ignores ambient proxies by default.
### 新增 / Added
- **wlroots Wayland 支持手机输入法 `text_input`**(#51,感谢 @hiclaw):手机端输入法提交的文字,
在 Hyprland / Sway 等 wlroots 合成器上通过虚拟键盘的备用键码上屏。仅在 Hyprland 0.56.2 上实测;
KWin / GNOME(门户后端)仍不支持,见 #50。
- Mobile IME `text_input` now types through the virtual keyboard's spare keycodes on wlroots compositors.
Tested on Hyprland 0.56.2 only; KWin/GNOME (portal backend) are not covered yet.
### 变更 / Changed
- **云端接口默认忽略代理环境变量**(#52,感谢 @aresbit):本地有拦截 TLS 的 HTTP/SOCKS 代理时,登录会报
`tls handshake eof`。现在主机和控制端访问网易服务器默认直连,忽略 `http_proxy` / `https_proxy` / `all_proxy`;
确实需要经代理上网的环境请设置 `UU_USE_PROXY=1`。未在拦截代理环境中实机验证,CI 测试通过。
- Cloud API clients now bypass `http_proxy` / `https_proxy` / `all_proxy` by default; set `UU_USE_PROXY=1` if your
network requires a proxy. Not verified against an intercepting proxy; CI passes.
### 下载 / Download
`uu-remote-linux-v0.2.11-x86_64-linux.tar.gz`(主机 `uuremote-server` + 控制端 `uuremote-viewer`,附带 `contrib/`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.11`。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+15
View File
@@ -0,0 +1,15 @@
修复缩放桌面尺寸为奇数时画面一直「正在传输」。/ Fix the stream never starting when the captured desktop has an odd size.
### 修复 / Fixed
- **奇数尺寸桌面无法出画面**(#53,感谢 @wen0531):KDE Plasma(Wayland,门户后端)150% 缩放、两块屏上下排列时,
逻辑桌面为 2560x2507,H.264/HEVC 编码器要求偶数宽高,全部启动失败,客户端一直停在「正在传输画面」。
现在原生分辨率采集遇到奇数宽高时,在右/下补齐 1 像素黑边再编码;偶数尺寸、「其他分辨率」缩放不受影响。
贡献者已在 KDE Plasma 6.7 / Wayland / NVENC + 官方安卓客户端上实测。进程内编码(`inproc-av`)路径未覆盖。
- When the native capture size is odd (e.g. scaled stacked monitors), the encoder input is padded by one black
row/column so every H.264/HEVC encoder can open. Verified by the contributor on KDE Plasma 6.7 (Wayland, NVENC).
The optional `inproc-av` path is not covered.
### 下载 / Download
`uu-remote-linux-v0.2.12-x86_64-linux.tar.gz`(主机 `uuremote-server` + 控制端 `uuremote-viewer`,附带 `contrib/`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.12`。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+25
View File
@@ -0,0 +1,25 @@
一个包支持所有桌面:Wayland 和 GNOME/KDE 不再需要源码编译。/ One package for every desktop: no source build needed for Wayland or GNOME/KDE.
### 新增 / Added
- **预编译包内置 Wayland 与 GNOME/KDE 支持**(#43、#54):Release 包新增 `libuu-wayland.so`(Hyprland / Sway / niri 等 wlroots)
和 `libuu-portal.so`(GNOME / KDE Wayland)。程序按当前会话自动选择后端,只在 Wayland 会话里加载对应插件,X11 用户不需要任何
Wayland 库。安装:
```sh
install -Dm755 uuremote-server ~/.local/bin/uuremote-server
install -Dm644 libuu-wayland.so libuu-portal.so -t ~/.local/lib/uu-remote-linux/
```
系统要求:X11 与 wlroots 为 glibc ≥ 2.35;GNOME/KDE 插件为 glibc ≥ 2.39(Ubuntu 24.04、Fedora 40、Debian 13 及更新)及 libei ≥ 1.1。
缺库或版本过旧时日志会写明原因。**验证范围**:插件加载、回退与报错在 Hyprland 虚拟机(ARM)实测,wlroots 采集正常;
预编译的 GNOME/KDE 插件尚未在真机上完成画面/键鼠验收(引擎代码本身未改动)。Wayland 仍为实验性。
- The release now ships `libuu-wayland.so` and `libuu-portal.so`, loaded at runtime only on Wayland sessions; X11 hosts need no
Wayland libraries. The portal plugin requires glibc >= 2.39 and libei >= 1.1. Plugin loading was tested on a Hyprland VM;
the prebuilt GNOME/KDE plugin has not yet been accepted on real hardware.
### 改进 / Improved
- 在 GNOME/KDE Wayland 上缺少 portal 支持时,不再反复报看不懂的 `portal unavailable (code 2)`,而是直接说明原因和解决办法(#43)。
- README:支持表加入 niri(实验性,协议已按源码确认、未实机验收);systemd 单元名须为 `uuremote-native.service`;uinput 无人值守授权示例(#55)。
### 下载 / Download
`uu-remote-linux-v0.2.13-x86_64-linux.tar.gz`(`uuremote-server`、`uuremote-viewer`、`libuu-wayland.so`、`libuu-portal.so`、`contrib/`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.13`。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+20
View File
@@ -0,0 +1,20 @@
Hyprland 双屏点击偏移修复,并可在手机端切换显示器(实验性)。/ Hyprland dual-monitor pointer fix and opt-in monitor switching.
### 修复 / Fixed
- **Hyprland 双屏点击偏移**(#57,感谢 @JuanZoran):原生 Wayland 后端的绝对鼠标定位改为绑定正在采集的输出
(此前 uinput 绝对坐标映射到整个桌面,双屏时点击位置偏移)。uinput 仍用于键盘、按键和相对移动。
**影响所有 Hyprland 用户的默认路径**;单屏下映射结果与之前等价。贡献者已在双屏真机(2560×1440@125% + 1920×1080@133%)
上验证落点误差 ≤ 2 像素;维护者未另行复测。
- Absolute pointer motion on the native Wayland backend is now bound to the captured output (it previously spanned the whole
desktop through uinput, offsetting clicks on multi-monitor setups). Verified by the contributor on real dual-monitor hardware.
### 新增 / Added
- **Hyprland 多显示器切换(实验性,默认关闭)**:设置 `UU_WAYLAND_MULTISCREEN=1` 后,手机端可以选择物理显示器,画面与
鼠标定位同步切换;`UU_WAYLAND_OUTPUT` 指定默认屏幕。通过 `hyprctl` 枚举未旋转的显示器,插拔或布局变化后需重启服务;
切换失败会恢复原屏。由贡献者用官方手机客户端在 Omarchy / Hyprland 双屏上实测。
- Opt-in Hyprland monitor switching (`UU_WAYLAND_MULTISCREEN=1`), accepted by the contributor with the official phone client.
### 下载 / Download
`uu-remote-linux-v0.2.14-x86_64-linux.tar.gz`(含 `libuu-wayland.so` / `libuu-portal.so`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.14`。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+18
View File
@@ -0,0 +1,18 @@
ARM64 预编译包;无硬件编码器时默认 H.264。/ aarch64 release package; CPU-only hosts default to H.264.
### 新增 / Added
- **aarch64 预编译包**(#59,感谢 @DeliciousBuding):新增 `uu-remote-linux-v0.2.15-aarch64-linux.tar.gz`,与 x86_64 包相同,
含 `uuremote-server`、`uuremote-viewer` 和两个桌面引擎插件;ARM64 主机不再需要源码编译。CI 新增 ARM64 原生构建与测试(#58)。
aarch64 包由 GitHub ARM runner 构建,尚未在真实 ARM 主机上运行验收。
- New aarch64 release package (same contents as x86_64), built on GitHub ARM runners; not yet run on real ARM hardware.
### 变更 / Changed
- **只有 CPU 编码时默认使用 H.264**(#59):libx265 比 libx264 慢约 10 倍(4 核 Ampere A1 上 1080p 约 15 帧对 155 帧),
原先 CPU 主机默认 H.265 会掉到十几帧。现在只有使用硬件编码器(NVENC / 显式 VAAPI)时才自动选 H.265;
`UU_VIDEO_CODEC=h265` 仍可强制 H.265。NVENC / VAAPI 主机行为不变。
- Without NVENC/VAAPI the host now picks H.264 even when both sides offer H.265; `UU_VIDEO_CODEC=h265` forces H.265.
### 下载 / Download
`uu-remote-linux-v0.2.15-x86_64-linux.tar.gz` / `uu-remote-linux-v0.2.15-aarch64-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.15`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+18
View File
@@ -0,0 +1,18 @@
KDE 远程期间不再自动锁屏;锁屏和黑屏原因写进日志。/ No idle lock on KDE during remote sessions; lock and black-screen hints.
### 修复 / Fixed
- **KDE Wayland 远程操作中途自动锁屏**(#61,感谢 @coolxll):桌面连接期间通过 `org.freedesktop.ScreenSaver.Inhibit` 阻止空闲锁屏,
断开后释放(GNOME 沿用 SessionManager 的空闲抑制)。尚未在 KDE 真机上验证。
- **`inproc-av` 奇数尺寸桌面**(#60,感谢 @ferstar):进程内编码路径同样补齐为偶数尺寸(#53 只修了默认 FFmpeg 管线)。
`inproc-av` 不在预编译包里;未在奇数尺寸真机上验证。
### 改进 / Improved
- 桌面锁屏时日志提示「控制端在解锁前只会看到黑屏」,并给出解锁方式(控制端「自动解锁被控端」或本机 `loginctl unlock-session`)。
- 检测到 Wayland 会话却选中了 X11 后端时给出警告(此时采集 XWayland 只会得到全黑画面且没有报错)。
- KDE sessions hold a freedesktop ScreenSaver inhibitor while connected (not yet tested on real KDE); the log now explains lock-screen
black frames and warns when X11 capture is used inside a Wayland session; `inproc-av` pads odd sizes too.
### 下载 / Download
`uu-remote-linux-v0.2.16-x86_64-linux.tar.gz` / `uu-remote-linux-v0.2.16-aarch64-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.16`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+14
View File
@@ -0,0 +1,14 @@
新增 `uuremote-server doctor` 一键诊断。/ New `uuremote-server doctor` diagnostic report.
### 新增 / Added
- **`uuremote-server doctor`**:一次输出提 issue 需要的状态——会话类型与桌面、最终选中的后端(含「Wayland 会话里用了 X11 后端会黑屏」的提醒)、
Wayland / portal 插件能否加载及缺什么库、`/dev/uinput` 与显卡 render 节点权限、FFmpeg 可用编码器和版本、默认编码(H.264 / H.265)、
是否已登录、服务状态和重复进程。只输出布尔值、名称和版本,主目录和用户名会被替换,不含账号 ID、令牌、IP、MAC 或文件内容,
可以直接贴到 issue。issue 模板已改为先运行它。
- `uuremote-server doctor` prints a paste-safe report (session, backend, plugins, permissions, encoders, default codec, sign-in and
service state) with no ids, tokens, addresses or file contents.
### 下载 / Download
`uu-remote-linux-v0.2.17-x86_64-linux.tar.gz` / `uu-remote-linux-v0.2.17-aarch64-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.17`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+25
View File
@@ -0,0 +1,25 @@
Ubuntu / Debian 安装包(.deb);实验性远程开机辅助。/ Debian packages; experimental Wake-on-LAN helper.
### 新增 / Added
- **`.deb` 安装包**(amd64 / arm64):`sudo apt install ./uu-remote-linux_0.2.18_amd64.deb` 一步装好程序、两个桌面插件、
用户级 systemd 服务和应用菜单图标,依赖由 apt 自动安装。之后以桌面用户运行:
```sh
uuremote-server login
systemctl --user enable --now uuremote-native.service
```
服务随图形会话启动(GNOME / KDE 会自动传入显示环境;Xfce 等需按 README 补 `DISPLAY`)。uinput 权限不会自动开启,规则文件放在
`/usr/share/doc/uu-remote-linux/`。安装流程在 CI 的 Ubuntu 22.04 上实测(apt 安装、`--help`、systemd 单元校验);尚未在真实桌面上完整验收。
- **远程开机辅助(实验性,默认关闭,`UU_WOL_HELPER=1`)**:仿照官方 Windows 被控端,登录后向网易上报本机局域网信息,
收到云端的唤醒请求时向同一局域网发送唤醒包,让这台常开的 Linux(例如 NAS)帮你唤醒同局域网的其他电脑。
字段名来自官方程序的日志字符串,**未经端到端验证**;不开启时不上报任何局域网信息,只记录唤醒推送的字段名(不含 MAC/IP)。
- Debian packages (amd64/arm64) with the binaries, plugins, a systemd user unit and menu entries; install-tested on Ubuntu 22.04 in CI.
Experimental, opt-in Wake-on-LAN helper (`UU_WOL_HELPER=1`) modelled on the official Windows host; not verified end to end.
### 修复 / Fixed
- `uuremote-server doctor` 不再输出带完整路径的插件加载日志(路径可能含用户名)。
### 下载 / Download
`uu-remote-linux_0.2.18_amd64.deb` / `uu-remote-linux_0.2.18_arm64.deb`,或 `uu-remote-linux-v0.2.18-<x86_64|aarch64>-linux.tar.gz`,
或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.18`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+18
View File
@@ -0,0 +1,18 @@
无头 Wayland 出画面、自定义码率、`show` 与登录体验修复。/ Headless Wayland video, custom bitrate, `show` and login fixes.
### 修复 / Fixed
- **无头 Wayland 主机连上没有画面**(#64 / #65,感谢 @axlrose):输出不支持 DPMS 时电源握手失败不再中断视频;贡献者在 sway headless 上复现并验证。
- **自定义码率单位错误**(#67,感谢 @JuanZoran):手机端自定义码率按 bit/s 发送(1 Mbps = 1000000),此前被当成 kbit/s 而触发 100 Mbps 上限,
导致大量重传、画面滞留。贡献者在 Hyprland + NVENC 上用手机实测。另外对明显是 Mbps / kbps 的小数值做了兜底换算(维护者补充,未实测)。
- **`uuremote-server show` 静默卡 30 秒**(#62,感谢 @axlrose):服务被条件跳过、反复崩溃重启或启动失败时立即报出真实原因。贡献者已用真实 systemd 单元验证。
- **登录二维码反复立即失效**(#68,感谢 @axlrose):状态轮询在服务器立即应答时不再紧循环(2 秒退避);二维码连续在几秒内失效时指数退避,
并提示可备份删除 `~/.config/uuremote/config.json` 重新登录(注册新设备身份,#68 中以此恢复)。退避逻辑未在被标记的设备上实测。
### 改进 / Improved
- `doctor`:会话里没有 `DISPLAY` / `WAYLAND_DISPLAY` 时给出提示(#66,感谢 @axlrose)。
- 文档:`inproc-av` / `viewer-ffmpeg` 只支持 FFmpeg 6.x,FFmpeg 7+ 会在依赖里报 `avfft.h file not found`(#63)。
### 下载 / Download
`uu-remote-linux_0.2.19_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.19-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.19`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+18
View File
@@ -0,0 +1,18 @@
扫码登录改为与官方客户端一致,修复二维码刚生成就失效。/ QR sign-in now matches the official client.
### 修复 / Fixed
- **登录二维码反复立即失效(1190)**(#68,感谢 @axlrose 的详细排查):逆向官方 Mac 客户端(4.42)后确认,新版服务端在生成二维码时
返回 `status_query_ticket`,官方客户端查询扫码状态和确认登录时都用它(放在 `token` 键下);我们此前优先发送旧的 `token` 字段。现在与官方一致:
- 生成二维码不带请求体;状态查询用 `status_query_ticket`(服务端没有时才用旧 `token`);
- 状态查询是长轮询,每次应答后立即再问,单次超时 60 秒(此前 12 秒);
- 状态 3 立即换新码、状态 0 在 0.35 秒后换新码、状态 4 登录(状态 3 不再去调确认登录);
- 出错(如 HTTP 400 / 1190)或超时时停止轮询,等用户点击登录窗口新增的「刷新二维码」按钮(终端里按回车;既无窗口也无终端时 60 秒后自动换码)。
取代 v0.2.19 的临时退避和「重新注册设备」提示。已用全新设备身份实测:状态查询正常挂起,60 秒后按官方行为停止并等待刷新;
未在 #68 那台被标记的设备上实测,「刷新二维码」按钮的界面尚未在桌面上目视验收。
- QR sign-in mirrors the official Mac client: `status_query_ticket` as the status ticket, 60 s long poll, regenerate on status 3/0,
stop on errors (e.g. code 1190) until the user clicks the new “refresh QR” button.
### 下载 / Download
`uu-remote-linux_0.2.20_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.20-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.20`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+19
View File
@@ -0,0 +1,19 @@
Wayland 合成器缺少虚拟指针或虚拟键盘时,桌面仍可使用;systemd 单元示例与 deb 包一致。/ Wayland desktops without virtual pointer/keyboard protocols still come up.
### 修复 / Fixed
- **只缺 wlr-virtual-pointer 或虚拟键盘受限的合成器整个桌面不可用**(#72、#73,感谢 @clionertr):Denial 等合成器不提供
`zwlr_virtual_pointer_manager_v1`,或只把虚拟键盘给它自己的输入法。现在这两个协议都是可选的:画面采集照常启动,
缺指针时绝对移动改走 uinput(需能访问 `/dev/uinput`,见 README);`UU_WAYLAND_NO_VIRTUAL_KEYBOARD=1` 可跳过虚拟键盘。
只有「完全没有虚拟指针」才回退 uinput;坐标超出当前采集输出等其他失败照旧返回,不会把指针移到别的屏幕(#78)。
CI 构建与测试通过,**未在 Denial 上实机验证**;Hyprland 等已有虚拟指针的合成器行为不变。
- Virtual pointer and keyboard are optional on Wayland; capture still starts and pointer motion falls back to uinput only when
the compositor has no wlr-virtual-pointer. Not tested on Denial.
### 文档 / Docs
- README 的用户 systemd 单元与 deb 包一致:不再写死 `DISPLAY=:0`,随 `graphical-session.target` 启动;无头模式、虚拟桌面和
Xfce/i3 等不启动该 target 的桌面改用 `WantedBy=default.target`(#69,感谢 @ferstar)。
### 下载 / Download
`uu-remote-linux_0.2.21_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.21-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.21`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+20
View File
@@ -0,0 +1,20 @@
官方控制端能选「真彩」(4:4:4) 了;自行编译的 `inproc-av` 新增进程内 NVENC 与 AMD/Intel VAAPI。/ The official viewer can select true color (4:4:4); self-built `inproc-av` gains in-process NVENC and VAAPI.
### 修复 / Fixed
- **官方控制端里「真彩」不可选或打开后马上被切回**(#77、#79):设备能力里 HEVC/4:4:4 等格式的宽高原来填的是 0x0,官方控制端会把这样的条目当作不支持。现在每种格式都带上最大尺寸 3840x2160。
已实机验收:官方 Mac 控制端连 X11 + NVIDIA 主机,打开真彩后切到 HEVC 4:4:4,持续 30 秒以上没有被切回,也没有请求关键帧(PLI)。
- The device capability listed HEVC/4:4:4 formats as 0x0, which the official viewer treats as unsupported; each format now
carries its maximum size. Verified with the official Mac viewer: true color stays on (HEVC 4:4:4) for 30+ s, no PLI.
### 新增(需自行编译,预编译包不受影响)/ Added (self-built only; release packages unchanged)
- `--features inproc-av`(仅 X11):
- **NVENC 进程内编码**(#75、#77,感谢 @ferstar):直接读取 XShm,支持 4:4:4,不再经过 FFmpeg 进程;失败时依次回退到 FFmpeg 的 NVENC 管线、CPU。我方 NVIDIA 机器未单独验收这条进程内路径。
- **VAAPI 进程内编码**(#80、#81,感谢 @ferstar):通过 DRI3 DMA-BUF 零拷贝取屏(没有 DRI3 时改用 XShm 上传),经 VPP 转成 NV12 后送入硬件编码,支持 H.264 和 H.265。贡献者已在 AMD HawkPoint、Cezanne 上用官方 Mac 控制端实机验收;Intel 与 4K 尚未验证。需设置 `UU_VIDEO_ENCODER=vaapi`。
- libcuda、libva 都在运行时加载;编译所需的头文件见 README。
- In-process NVENC (XShm, 4:4:4) and VAAPI (DRI3 DMA-BUF zero copy, H.264/H.265) under `--features inproc-av` on X11,
each falling back to the FFmpeg process pipeline. VAAPI accepted by the contributor on AMD HawkPoint/Cezanne; Intel and 4K untested.
### 下载 / Download
`uu-remote-linux_0.2.22_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.22-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.22`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
长时间连接后画面冻结的修复。/ Fixes video freezing after long sessions.
### 修复 / Fixed
- **控制端切到后台再恢复后画面冻结、延迟显示 0**(#83,感谢 @AYssu 定位并提供补丁):RTP 序号每 65536 包回绕一次;
回绕后如果控制端补要(NACK)回绕前的旧包,webrtc-srtp 0.12.0 会把加密状态退回旧值,之后的新包都用错误的回绕计数加密,
控制端全部认证失败,画面停住且不再恢复。现按 RFC 3711 附录 A 估算回绕计数,重传不再让状态倒退。加密算法和报文格式不变。
回归测试在原库上失败、修复后通过(AES-CM/HMAC 与 AES-GCM);报告者在 Windows 控制端实测后台放置恢复正常,跨过两次回绕。
- SRTP rollover counter no longer rewinds when a pre-wrap packet is retransmitted after the wrap (frozen video, #83).
### 下载 / Download
`uu-remote-linux_0.2.23_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.23-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.23`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+17
View File
@@ -0,0 +1,17 @@
X11 下切换分辨率会真正修改桌面分辨率。/ On X11 the viewer's resolution choice now changes the desktop resolution.
### 新增 / Added
- **控制端切换分辨率时真正修改桌面分辨率**,与官方 Windows 被控端一致:以前「其他分辨率」只缩放编码画面,选小分辨率反而让字更小更糊。
现在 X11 下用 xrandr 切换主显示器模式,列表里没有的分辨率会自动添加;选「原始」或断开连接后恢复原分辨率。
已用官方 Mac 控制端在 GNOME(X11)上实测切换与恢复。设置 `UU_DESKTOP_RESIZE=0` 可回到只缩放画面的旧行为;Wayland 不变。
- On X11 the resolution choice switches the display mode via xrandr (adding the mode when missing) and restores it for
"original" or on disconnect, like the official Windows host. `UU_DESKTOP_RESIZE=0` restores encoder scaling.
### 修复 / Fixed
- **连接中桌面分辨率变化后画面中断**:以前会把采集失败当成编码器故障,逐个换编码器后停止推流。现在按新尺寸重新采集,鼠标坐标随之更新。
- A desktop resize during a session no longer stops the stream; capture restarts at the new size and pointer mapping follows.
### 下载 / Download
`uu-remote-linux_0.2.24_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.24-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.24`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+12
View File
@@ -0,0 +1,12 @@
托盘图标随深色/浅色模式自动变色。/ The tray icon now follows light and dark panels.
### 修复 / Fixed
- **深色模式下托盘图标看不清**(#87):托盘改用内置单色符号图标,GNOME(AppIndicator 扩展)和 KDE 会按面板主题自动着色,
tarball 安装也不用另装图标。旧版 AppIndicator 库或缓存目录不可写时沿用原图标。目前只经过 CI 编译,尚未在 KDE / GNOME 面板上实机确认。
- The tray uses a built-in monochrome symbolic icon (written to the user cache and offered as the indicator's icon theme
path) that GNOME's AppIndicator extension and KDE recolor for the panel theme. Built in CI; not yet checked on a real panel.
### 下载 / Download
`uu-remote-linux_0.2.25_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.25-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.25`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+16
View File
@@ -0,0 +1,16 @@
修复 KDE 托盘图标显示为未知图标;显示器接在 NVIDIA 卡上时默认不再让 NVENC 直接编码 BGRA。/ Fixes the KDE tray icon; NVENC skips direct BGRA input when NVIDIA drives the display.
### 修复 / Fixed
- **KDE 托盘显示成未知(空白页)图标**(#87,v0.2.25 引入):单色托盘图标改名为 `uuremote-tray-symbolic`,写到 `~/.local/share/icons/hicolor`,
各家面板的默认图标查找都能找到,仍会随深色/浅色面板着色。已在 Plasma 6.7 / KF6 上用 KIconLoader 按 Plasma 的查找方式验证,Plasma 6.8 面板待报告者确认。
v0.2.25 留下的 `~/.cache/uu-remote-linux/icons` 不再使用,可以删除。
- **同一张 NVIDIA 卡负责显示时编码变慢**(#16):显示、采集、编码都在同一张 NVIDIA 卡上时,NVENC 直接编码 BGRA 反而比 CPU 转换慢
(RTX 5070 4K:探针 82.6 vs 98 fps)。现在只要有显示器接在 NVIDIA 卡上就改用 CPU 转换;核显接显示器的机器不变。`UU_NVENC_RGB=1` 强制直接编码,`=0` 强制 CPU 转换。
- The tray icon is installed as `uuremote-tray-symbolic` in the user hicolor theme, so KDE's default lookup finds it
(v0.2.25 showed the unknown icon on Plasma 6.8). NVENC no longer takes packed BGRA when a connected monitor hangs off
an NVIDIA card (slower when the desktop is composited on the encoding GPU); `UU_NVENC_RGB=1` forces it.
### 下载 / Download
`uu-remote-linux_0.2.26_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.26-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.26`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+26
View File
@@ -0,0 +1,26 @@
可手动选择视频编码器和 codec,auto 改为后台探测;Wayland 屏幕保活失败不再中断画面;viewer 新增安全输入 `type`。/ Encoder and codec settings, background auto probe, display-wake failures no longer stop video, and a secure `type` command in the viewer.
### 新增 / Added
- **编码器与 codec 设置**(#85 第①②步,#92、#93,感谢 @ferstar):`uuremote-server set-encoder auto|cpu|vaapi|nvenc`、
`uuremote-server set-codec auto|h264|h265` 写入 `~/.config/uuremote/host_settings.json`,优先级高于 `UU_VIDEO_ENCODER` / `UU_VIDEO_CODEC`,
下次建立桌面连接时生效;`doctor` 显示来源和最终 codec。auto 在启动时后台探测(每个候选编码一帧合成画面,限时 3 秒,不挡第一路出图):
有 NVIDIA 时 NVENC → CPU,没有 NVIDIA 时直接用 CPU 不探测。NVENC 探测失败只缓存 10 分钟,之后的桌面连接会在后台重探;
NVIDIA 驱动或设备中途出现/消失也会重探。显式指定编码器时不探测。VAAPI 要等 #33 解决后才进入 auto。
- **viewer 安全输入 `uuremote-viewer type`**(#70,感谢 @212duo):向已打开的桌面会话注入键盘(锁屏 PIN / 密码),文本不进 argv,
日志只记长度;按 US QWERTY 键位映射。本机 IPC 用私有目录和对端 uid 校验。
- `set-encoder` / `set-codec` write the video settings to `host_settings.json`; auto now probes NVENC then CPU in the background
(CPU only without NVIDIA, NVENC failures retried after 10 minutes). The viewer gains `type`, a secure key-injection command that
reuses the open desktop session.
### 修复 / Fixed
- **Wayland 运行中屏幕保活失败会停掉视频**(#94、#95,感谢 @AYssu):启动时和每 30 秒的屏幕保活改为尽力而为,失败只记警告、下轮重试,
画面继续发送;采集、编码、发送错误仍按原逻辑处理。
- A failed display wake at stream start or during the 30-second refresh is logged and retried instead of ending the video.
### 验证范围 / Validation
单元测试与 CI(x86_64、arm64、Wayland、inproc-av、viewer)通过;以上改动尚未在报告者现场或 NVIDIA 机器上实机验收。
### 下载 / Download
`uu-remote-linux_0.2.27_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.27-<x86_64|aarch64>-linux.tar.gz`,或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.27`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+19
View File
@@ -0,0 +1,19 @@
tar 包新增 `install.sh`,缺 FFmpeg 时自动安装;宿主缺 FFmpeg 时弹桌面提示,不再让客户端一直停在「正在传输画面」。/ The tarball gains `install.sh`, which installs FFmpeg when missing; the host tells the desktop user when FFmpeg is missing.
### 新增 / Added
- **tar 包安装脚本 `install.sh`**:解压后用普通桌面用户运行 `./install.sh`。程序和插件装到 `~/.local`,写入用户级 systemd 服务(已有则保留),
并检查 FFmpeg(需带 libx264)。缺失时询问后经 sudo 用 apt / pacman 安装(`--yes` 不询问,`--no-ffmpeg` 只检查);Fedora 需先启用 RPM Fusion,
openSUSE 需 Packman 源,脚本只打印命令、不替你添加第三方源。.deb 包本来就依赖 `ffmpeg`,不受影响。
- **缺 FFmpeg 时的桌面提示**:宿主在启动时和每次有人连接桌面时检查 FFmpeg。不可用时记 error,弹出「无法传输远程画面」桌面通知并给出安装命令;
没有通知服务的桌面(如精简 Xfce)改为打开宿主窗口,顶部红字提示。最多每 5 分钟一次;装好后重新连接即可,不用重启服务。
- `install.sh` installs into `~/.local`, writes the systemd user unit and installs FFmpeg with libx264 through apt or pacman when missing.
The host checks FFmpeg at startup and on every desktop connection and shows a desktop notification (or opens its window) when it is missing.
### 验证范围 / Validation
`install.sh` 在 Debian 13(Xfce)上实测:卸掉 FFmpeg 后 `--yes` 自动装回;CI 在 Ubuntu 22.04 上做同样的测试。通知和窗口红字用测试程序在 Xfce 上实测
(有/无通知服务两种情况);宿主内的完整流程只有编译与 CI 覆盖。
### 下载 / Download
`uu-remote-linux_0.2.28_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.28-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.28`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+22
View File
@@ -0,0 +1,22 @@
运行中切换编码器不再断开连接;X11 双屏/多屏可以只看其中一块屏幕(实验性)。/ Switch the encoder without dropping the session; select one monitor on X11 (experimental).
### 新增 / Added
- **运行中切换编码器(#85 第③步,#96,感谢 @ferstar)**:`uuremote-server set-encoder auto|cpu|vaapi|nvenc` 和 `set-codec` 写入设置后会通知正在运行的宿主(`SIGUSR2`),
已连接的桌面在下一帧边界换用新编码器,不用断开重连;VAAPI 不支持真彩 4:4:4 时自动降为 4:2:0 并通知客户端。只通知完整路径相同的宿主程序,
避免误杀旧版本宿主;没有通知到宿主时会打印提示(下次连接或重启服务后生效)。编码格式(H.264/H.265)偏好仍在下次连接时生效。
- **X11 单屏选择(#98,实验性)**:设置 `UU_X11_MULTISCREEN=1` 后,主机按 `xrandr --listmonitors` 列出各显示器,控制端可选择其中一块,只采集该区域,
鼠标绝对坐标加上该屏幕的偏移;默认主显示器,`UU_X11_OUTPUT` 可指定其他屏幕。显示器布局在启动时读取,改动后需重启服务;此模式下「分辨率」改为缩放画面。默认关闭,单屏用户不受影响。
- `set-encoder` / `set-codec` now switch a live desktop stream's encoder via `SIGUSR2` (same binary only) without reconnecting.
`UU_X11_MULTISCREEN=1` lets the viewer pick one X11 monitor (RandR monitors; capture and absolute input follow the selected monitor).
### 其他 / Other
- Issue 模板的诊断命令:保留连接状态和端口映射日志、过滤 WebRTC 内部噪音,并抹掉 IPv6 和 MAC 地址。
### 验证范围 / Validation
运行中切换编码器:单元测试与 CI,官方客户端下的切换时序尚未实机验证。X11 单屏选择:单元测试;在 Debian 13 上用两块 RandR 虚拟显示器实测,
鼠标落点与按区域采集正确;官方客户端在真实双屏上的切换尚未实机验证,欢迎反馈。
### 下载 / Download
`uu-remote-linux_0.2.29_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.29-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.29`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+18
View File
@@ -0,0 +1,18 @@
先开端口映射再打开桌面时不再黑屏;VAAPI 低码率档能压到更低码率。/ Opening the desktop after a port mapping no longer shows a black screen; VAAPI low-bitrate presets go lower.
### 修复 / Fixed
- **端口映射后打开桌面黑屏(#99)**:已有端口映射连接时,Mac 控制端打开桌面不会新建连接,而是在原连接上发送 `capture_desktop`。
宿主现在会把这条连接转为桌面:画面、光标、剪贴板和会话计数都会启动,剪贴板能力也会重新通告。之后再打开新的桌面时,旧连接只停掉桌面,
端口映射照常可用。若此前 X11 分辨率有变化,会按新尺寸重建采集。限制:Wayland Portal 后端暂不支持这种方式;这条连接上没有声音。
- **VAAPI 低档码率(#33,#102,感谢 @ferstar)**:in-process VAAPI 编码的最大 QP 从 44 放宽到 51,复杂画面下低档可降到硬件能达到的最低码率;中高档不受影响。
- A viewer that opens the desktop on an existing port-mapping connection (`capture_desktop`) now gets video, cursor, clipboard and session handling on that connection;
a later desktop stops it without closing the port mappings. In-process VAAPI `max_qp` raised from 44 to 51.
### 验证范围 / Validation
#99:根因由报告者日志证实;修复只有单元测试与 CI,官方 Mac 控制端下尚未实机验证,欢迎反馈。#102:贡献者在 AMD 核显上实测(2560×1600 复杂画面最低档 4.16→2.60 Mbps,
中高档输出一致),我们这边仅 CI。
### 下载 / Download
`uu-remote-linux_0.2.30_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.30-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.30`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+14
View File
@@ -0,0 +1,14 @@
NVENC 新增可选 VBV 缓冲开关,缓解高分辨率下关键帧按 GOP 周期闪烁。/ Opt-in NVENC VBV buffer for high-resolution keyframe pulsing.
### 新增 / Added
- **`UU_NVENC_BUFFER_MS`(#103,感谢 @zhl-HFUT 的分析)**:NVENC 的 VBV 缓冲(10–1000 ms,缓冲 = 码率上限 × 毫秒 / 1000),FFmpeg 进程管线和进程内引擎都生效。
默认缓冲(100–500 kbit)在 1440p 等高分辨率下会把关键帧压糊,画面按 GOP 周期“糊一下再变清”;遇到时可设 `UU_NVENC_BUFFER_MS=1000`。默认行为不变。
- New `UU_NVENC_BUFFER_MS` (10–1000 ms of the bitrate cap) for NVENC, applied to both the FFmpeg pipeline and the in-process engine. Default unchanged.
### 验证范围 / Validation
仅单元测试与 CI,尚未在 NVENC 实机上验证,欢迎反馈。
### 下载 / Download
`uu-remote-linux_0.2.31_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.31-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.31`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+17
View File
@@ -0,0 +1,17 @@
修复端口映射在 ICE 瞬断恢复后被续房拆掉、信令卡死后长时间假在线,以及查看器 CLI 的指针偏移与滚轮。/ Fixes port-mapping teardown after ICE recovery, stalled signaling, and viewer CLI pointer/wheel input.
### 修复 / Fixed
- **ICE 瞬断恢复后连接被拆(#109,感谢 @sinoyster 的细致分析)**:WebRTC 的 ICE 状态回调读到的是占位 DTLS 对象,ICE `Disconnected → Connected` 恢复后 PeerConnection 停在 `New`,15 分钟续房把仍在使用的端口映射当成空闲,拆房并断开所有映射 TCP 流。现在恢复后会回到 `Connected`。
After a brief ICE drop the peer state settled on `New` instead of `Connected`, so the idle room renewal tore down live port-mapping streams.
- **信令投递卡住时心跳检测失效(#104,感谢 @RiverOnVenus)**:事件队列阻塞时 Engine.IO 超时不再执行,主机可能带着半关闭的连接“在线”数小时。现在有独立看门狗、发送超时和关闭超时。
Heartbeat detection keeps running when event delivery stalls; the host reconnects instead of staying half-online.
- **查看器 CLI**:16:10 等非 16:9 主机的指针按内容区域映射,不再内偏(#107,感谢 @liuyanghejerry);鼠标滚轮/触控板转发为滚动(#108,感谢 @liuyanghejerry)。
Viewer CLI: pointer mapped to the content rectangle of the padded canvas; mouse wheel forwarded.
### 验证范围 / Validation
单元测试与 CI;#109 的 ICE 恢复场景尚未实机复现,欢迎反馈。
### 下载 / Download
`uu-remote-linux_0.2.32_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.32-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.32`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
修复 Wayland 锁屏或熄屏后,由工具连接(端口映射)升级的桌面视频结束后无法再次打开。/ Fixes a promoted tool connection whose desktop video could not be reopened after the screen locked or blanked.
### 修复 / Fixed
- **锁屏/熄屏后桌面无法重新打开(#114,感谢 @sinoyster 的完整报告)**:通过 capture_desktop 升级为桌面的工具连接上,若 Wayland 采集因锁屏或 DPMS 关闭而结束,再次 capture_desktop 不会重建视频,查看器只剩黑屏。现在会重新请求桌面并在原连接上重启视频,保留原输入租约。
On a tool connection promoted with capture_desktop, a desktop stream that ended (e.g. Wayland capture failing on lock/DPMS) is now restarted on the next capture_desktop, keeping the original input lease.
### 验证范围 / Validation
单元测试与 CI;#114 的锁屏场景尚未实机复现,欢迎反馈。
### 下载 / Download
`uu-remote-linux_0.2.33_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.33-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.33`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+15
View File
@@ -0,0 +1,15 @@
修复网络波动后信令重连卡住,以及 Linux 控制端在平铺窗口管理器下画面空白。/ Fixes signaling reconnect stalling after a network hiccup, and the Linux viewer showing a blank window under tiling compositors.
### 修复 / Fixed
- **网络异常后停在 Acquired room signaling credentials(#115,感谢 @Changxi-M)**:信令 WebSocket 握手没有超时,网络半断时会无限等待,重连不再重试。现在握手限时 20 秒,超时后按原有退避重试。
The signaling WebSocket handshake is now bounded to 20 s, so a stalled handshake falls back to the normal reconnect retry instead of hanging forever.
- **控制端窗口平铺后画面空白(#118,感谢 @shao-zhijie)**:Linux 控制端只在收到新解码帧时绘制,合成器调整窗口尺寸后静止画面不会重绘;在尚未收到首帧时,Wayland 也不会映射没有提交缓冲的窗口。现在窗口尺寸变化/重新显示时用最后一帧重绘,无帧时先画黑底。
The Linux viewer now repaints the last frame after a compositor resize/expose, and paints a black frame before the first decoded frame so Wayland maps the window.
### 验证范围 / Validation
单元测试与 CI;#115、#118 的场景尚未实机复现,欢迎反馈。
### 下载 / Download
`uu-remote-linux_0.2.34_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.34-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.34`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+21
View File
@@ -0,0 +1,21 @@
信令可走 HTTP 代理、二维码登录错误分类、重复主机实例诊断,以及 Wayland 手机端文字输入兜底。/ Signaling through an opt-in HTTP proxy, clearer QR login errors, duplicate-host diagnostics, and a Wayland fallback for mobile text input.
### 新增 / Added
- **信令遵循 `UU_USE_PROXY=1`(#123)**:主机和 Linux 控制端的 WebSocket 信令改用与 REST 接口相同的 HTTP 客户端,开启 `UU_USE_PROXY=1` 后也走环境里的 HTTP/HTTPS 代理(不支持 SOCKS;选中的代理失败不会改为直连;不跟随重定向)。不代理 ICE/WebRTC 媒体。默认(不开代理)行为不变。
Host and viewer signaling now use the same HTTP client as the REST API, so `UU_USE_PROXY=1` applies to signaling too (HTTP/HTTPS proxies only, no direct fallback, no redirects). Media is not proxied; the default is unchanged.
- **Wayland/Portal 手机端文字输入兜底(#119,感谢 @shofukantkts)**:没有空闲键码的合成器和 Portal 后端上,手机端输入的文字经剪贴板 + Shift+Insert 粘贴;`UU_WAYLAND_TEXT=0` 可关闭。
Mobile text input on Portal and compositors without spare keycodes is pasted via the clipboard and Shift+Insert; `UU_WAYLAND_TEXT=0` disables it.
### 修复 / Fixed
- **二维码登录错误分类(#121)**:状态查询失败不再一律提示「网络超时」,区分超时、连接失败、响应异常与二维码过期;诊断只含阶段、类别、耗时和状态码,不输出票据、URL 或服务器内容。
QR polling failures are no longer all reported as a network timeout; timeouts, connection failures, bad responses and expiry are distinguished, with diagnostics that never include tickets, URLs or server content.
- **重复主机实例(#122)**:同一身份的两个主机实例(拷贝了 `config.json`,或残留的旧手动实例)会互相把对方踢出房间,表现为控制端一连就断。`doctor` 现在能数到重新执行后进程名为 `exe` 的实例并给出提示;README 说明不要在机器之间拷贝 `config.json`;日志会记录无 peer id 的 leave 事件结构(仅键名/类型/长度)。
Two host instances sharing one identity kick each other out of the room. `doctor` now counts re-executed instances and warns about extras, the README explains not to copy `config.json` between machines, and leave events without a peer id log their shape (keys/types/lengths only).
### 验证范围 / Validation
单元测试与 CI。#123 在真实 Linux X11 主机上实测不开代理时信令与 iPhone 桌面连接正常;经真实代理的信令尚未实测。#122 的修复在报告环境实机验证。
### 下载 / Download
`uu-remote-linux_0.2.35_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.35-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.35`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+15
View File
@@ -0,0 +1,15 @@
修复 X11 共享内存被拒时主机直接退出,以及 Linux 控制端加入已有会话时可能永久黑屏。/ Fixes the host exiting when X11 refuses shared memory, and a possible black screen when the Linux viewer joins a host that already streams to another session.
### 修复 / Fixed
- **X11 MIT-SHM 被拒时直接退出**:X 服务器无法访问本程序的共享内存段时(例如 X 服务器在另一个容器里),`XShmAttach` 返回 BadAccess,Xlib 默认错误处理直接结束了进程,原有的 `XGetImage` 退路没有机会执行。现在捕获该错误并改用 `XGetImage` 抓屏。
When `XShmAttach` is refused (BadAccess, e.g. an X server in another container), the host now falls back to `XGetImage` instead of being terminated by Xlib's default error handler.
- **控制端加入已有会话时黑屏(#124,感谢 @shao-zhijie)**:Linux 控制端过去只在丢包或解码出错时请求关键帧;加入一条已在推流的干净 H.264 流时永远等不到 IDR。现在首帧显示前每 30 个访问单元请求一次关键帧(PLI),300 个仍无画面时日志给出提示。
The Linux viewer now requests key frames (PLI) every 30 access units until the first frame is shown, and logs a warning after 300.
### 验证范围 / Validation
单元测试与 CI。共享内存退路尚待在报告环境实机确认;#124 中官方 Mac 主机是否响应 PLI 尚未实测。
### 下载 / Download
`uu-remote-linux_0.2.36_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.36-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.36`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
`UU_USE_PROXY=1` 时经 TCP/TLS(可走 HTTP 代理)连接 TURN 中继,供 UDP 到不了中继服务器的主机使用。/ With `UU_USE_PROXY=1`, TURN relays are also reached over TCP/TLS (optionally through the HTTP proxy) for hosts whose UDP cannot reach the relay servers.
### 新增 / Added
- **TURN over TCP/TLS**:云端在强制中继的会话里也会下发 `turns:<IP>:<端口>?transport=tcp`,原来使用的 webrtc-ice 只支持 UDP 中继,UDP 被限制、只能经 HTTP 代理出网的主机因此拿不到任何中继候选,控制端一直"正在尝试重连"。现在开启 `UU_USE_PROXY=1` 后,主机会经 `HTTPS_PROXY`/`ALL_PROXY` 中的无认证 `http://` 代理(没有则直连)建立 TCP/TLS 中继连接。TURN 证书按 CA 链校验,仅在云端下发的地址为 IP 时容忍名称不匹配;媒体仍由 DTLS-SRTP 端到端加密。未开启时只用 UDP 中继,行为不变(`vendor/webrtc-ice/PATCHES.md`)。
With `UU_USE_PROXY=1` the host also opens TURN relays over TCP/TLS through the unauthenticated `http://` proxy (or directly), chain-verifying certificates and tolerating a name mismatch only for IP TURN URLs. The default stays UDP-only.
### 验证范围 / Validation
单元测试(经模拟代理的 CONNECT 与 STUN/ChannelData 分帧)与 CI;与真实 TURN 服务器的 TCP/TLS 分配尚待在报告环境实机确认。
### 下载 / Download
`uu-remote-linux_0.2.37_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.37-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.37`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
TURN over TLS 改为同时信任系统证书库。/ TURN over TLS now also trusts the system certificate store.
### 修复 / Fixed
- **TURN over TLS 报 UnknownIssuer**:v0.2.37 的 TCP/TLS 中继只信任内置的 Mozilla 根证书;在会检查 TLS 的 HTTP 代理后面,中继证书由主机管理员装在系统证书库里的 CA 重新签发,OpenSSL 能通过、我们却报 `UnknownIssuer`。现在同时信任系统证书库(与 OpenSSL 一致)和内置根证书。仅影响 `UU_USE_PROXY=1` 时的 TCP/TLS 中继。
TCP/TLS relays (only with `UU_USE_PROXY=1`) now trust the system certificate store as well as the bundled Mozilla roots, so CAs added for TLS-inspecting proxies are honoured.
### 验证范围 / Validation
单元测试与 CI;报告环境实机验证进行中。
### 下载 / Download
`uu-remote-linux_0.2.38_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.38-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.38`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
Linux 控制端像官方控制端一样请求桌面视频轨道,修复第二个会话永久黑屏。/ The Linux viewer now requests the desktop video track like the official viewer, fixing a permanently black second session.
### 修复 / Fixed
- **第二个会话黑屏(#124,感谢 @shao-zhijie 的码流取证)**:被控端已在给别的控制端推流时,Linux 控制端只会接上那条流的中段,没有 SPS/PPS/IDR,永远无法解码;官方主机也不响应 RTCP PLI。官方 iPhone 控制端在 CONTROL 通道打开后会立即发 RPC 15 `SendVideoTrackReq`(无字段);Linux 控制端现在桌面会话里也发这一条。
Desktop sessions now send RpcRequest case 15 `SendVideoTrackReq` (no fields) right after CONTROL opens, as the official iPhone viewer does, so the host starts a track for this session instead of the viewer joining another session's stream mid-GOP.
### 验证范围 / Validation
单元测试与 CI;官方 iPhone 控制端发送该 RPC 的行为来自本项目主机日志(`response_field=11 value=None`)。与官方 macOS 主机的第二会话场景尚待报告者实测。
### 下载 / Download
`uu-remote-linux_0.2.39_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.39-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.39`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+23
View File
@@ -0,0 +1,23 @@
GNOME 多显示器与精确触控、niri 适配、控制端控制中心与中英文界面,以及登录设备注册修复。/ GNOME multi-monitor and precise touch, niri support, a viewer control center with Chinese/English UI, and a login device-registration fix.
### 新增 / Added
- **GNOME(Wayland / Portal)多显示器切换(#128,感谢 @spixyy7)**:逐块显示器公布并各自保存 Portal 授权,首次在主机上授权一次,之后静默恢复;最后一个控制端断开后立即停止屏幕共享。
GNOME Portal: per-monitor sources with per-monitor saved grants (asked once, restored silently); screen sharing stops when the last viewer leaves.
- **niri 支持(#71,感谢 @WALKERKILLER)**:`UU_WAYLAND_MULTISCREEN=1` 下的显示器枚举与切换、旋转输出的正向采集与指针映射、手机端中文输入。其他合成器行为不变。
niri: output enumeration/switching, upright capture and pointer mapping for rotated outputs, and mobile text input; other compositors unchanged.
- **原生控制端(#129,感谢 @spixyy7)**:按被控端原始分辨率解码、中英文界面(`UU_LANG` 或设置)、控制中心(`Ctrl+Alt+M`)、网络状态面板(`Ctrl+Alt+G`,显示实测 RTT)、连接加载画面。控制端登录不会开启本机被控服务(默认关闭)。
Native viewer: native-resolution decode, Chinese/English UI, control center, network panel with measured RTT, connection screen. Viewer login does not enable the local host service (off by default).
### 修复 / Fixed
- **GNOME 触控偏移(#128)**:绝对移动与点击改走当前 Portal 流,不再映射到整个多屏桌面。/ Absolute pointer goes through the current Portal stream.
- **账号下出现永远离线的“幽灵”设备(#127,感谢 @spixyy7)**:主机与控制端同时登录时,设备注册在配置文件锁下串行进行并复用已注册的设备。/ Device registration is serialized under a config lock.
- **控制端**:控制中心卡顿与随后的花屏、Wayland 下关闭文件传输窗口崩溃(#129)。/ Viewer menu stalls and resulting corruption; crash closing the file-transfer window on Wayland.
- **TURN over TCP/TLS 经检查型代理**:代理返回 HTTP 时给出明确错误(代理在检查 TLS 内容,TURN 无法通过),不再报含糊的解析错误。/ A clear error when an inspecting proxy answers with HTTP inside the relay stream.
### 验证范围 / Validation
单元测试与 CI。GNOME 多显示器/触控由贡献者在 Fedora 44 / GNOME 50.6 双屏实机验证;niri 与控制端改动由各自贡献者实机验证(控制端 RTT 补丁实测仅覆盖 Android 控制端场景)。
### 下载 / Download
`uu-remote-linux_0.2.40_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.40-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.40`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+18
View File
@@ -0,0 +1,18 @@
修复原生控制端连 Mac 无画面,GNOME 手机控制端新增手势滚动,控制端记住画质设置。/ Fixes the native viewer showing no picture from Mac hosts, adds gesture scrolling for phone viewers on GNOME, and remembers viewer quality settings.
### 修复 / Fixed
- **原生控制端连 Mac 被控端一直“连接中”、无画面(#136,感谢 @coolxll 二分定位)**:v0.2.40 在本地重置后只等 IDR,Mac 对 PLI 不回 IDR 时会一直丢帧。现在 H.264 I 片和恢复点 SEI 也可作为重启点,最多等待 1.5 秒后照常解码。
Native viewer: after a local reset it accepted only IDR frames, so a Mac host that answers PLI without one stayed blank. I slices and recovery-point SEI now count, and the wait is capped at 1.5 s.
### 新增 / Added
- **GNOME(Portal)手机控制端手势(#134、#131,感谢 @spixyy7)**:触控模式下拖动即平滑滚动(终端里也能滚),按住 0.45 秒后拖动为选中,短按为点击;默认不再需要触摸屏授权。`UU_TOUCH_INPUT=touch` 改用真触控,`=0` 保持鼠标拖动。输入法 ASCII 直接按键输入。
GNOME Portal phone viewers: drag scrolls smoothly (also in terminals), hold-then-drag selects, tap clicks, with no touchscreen consent by default; `UU_TOUCH_INPUT=touch` / `=0` select real touch or mouse drags.
- **控制端跨会话记住画质、帧率和真彩设置(#133,感谢 @spixyy7)**。/ The viewer remembers quality, frame rate and true-color choices.
### 验证范围 / Validation
单元测试与 CI。手机手势由贡献者在 Fedora 44 / GNOME 50.6 + 官方 Android 控制端实机验证;#136 的修复尚未连真实 Mac 被控端验证。
### 下载 / Download
`uu-remote-linux_0.2.41_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.41-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.41`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+25
View File
@@ -0,0 +1,25 @@
控制端新增可选手柄/震动与外观设置,修复 niri 剪贴板与高帧率丢帧;源码构建的 Portal 进程内 VAAPI/音频。/ Opt-in gamepad and appearance settings for the viewer, niri clipboard and high-frame-rate fixes, and in-process Portal VAAPI/audio for source builds.
### 修复 / Fixed
- **niri 主控端与官方 Windows 被控端的双向文本剪贴板(#139、#138,感谢 @tingfeng347)**:niri + Wayland 下检测到 `wl-paste`/`wl-copy` 时改用 wl-clipboard,同步不再依赖窗口焦点;缺少时回退 SDL,其他桌面不变。
niri viewer: two-way text clipboard with official Windows hosts now uses wl-clipboard when available, falling back to SDL.
- **控制端高帧率(如 144 FPS)下压缩帧队列溢出、反复请求关键帧(#143,感谢 @azuredreamblu-design)**:每轮最多解码 8 个单元(4 ms 软预算),只呈现最新画面,队列 3→8。
Viewer: compressed frames are decoded in bounded batches so sustained 144 FPS no longer overflows the queue.
- **`inproc-av` 在 GNU ld `--as-needed` 下链接失败(#105,感谢 @ferstar)**:依赖库改到静态引擎库之后链接(仅影响源码构建)。
Source builds: `inproc-av` link order fixed for `--as-needed`.
### 新增 / Added
- **控制端可选原生手柄与震动(连官方 Windows 被控端,#142,感谢 @azuredreamblu-design)**:`UU_VIEWER_NATIVE_GAMEPAD=1` 启用转发,`UU_VIEWER_NATIVE_RUMBLE=0` 单独关闭震动;默认关闭。
Viewer: opt-in controller forwarding and rumble for Windows hosts (`UU_VIEWER_NATIVE_GAMEPAD=1`).
- **GTK 界面统一扁平样式,新增 跟随系统 / 浅色 / 深色 外观选项(#144,感谢 @xfjm136)**。
GTK windows: refreshed styling with System / Light / Dark appearance.
- **源码构建 `wayland,portal,inproc-av` + 显式 VAAPI:Portal DMA-BUF 零拷贝编码、进程内 Opus 音频、锁屏下控制经 uinput(#145,感谢 @ferstar)**;失败时回退原 FFmpeg 管线。预编译包不含该特性。
Source builds with `wayland,portal,inproc-av`: zero-copy VAAPI from Portal DMA-BUF, in-process Opus audio and lock-screen input via uinput. Not in prebuilt packages.
### 验证范围 / Validation
单元测试与 CI(含 GTK 冒烟测试、`inproc-av`/Portal 特性构建)。手柄、高帧率解码、niri 剪贴板和 Portal VAAPI 由各贡献者在各自环境实机验证;维护者尚未用官方客户端复测。
### 下载 / Download
`uu-remote-linux_0.2.42_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.42-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.42`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+15
View File
@@ -0,0 +1,15 @@
KDE Wayland 被控端新增实验性防窥模式。/ Experimental privacy screen for KDE Wayland hosts.
### 新增 / Added
- **KDE Wayland 被控端防窥模式(隐私 / 关屏,#146,感谢 @ferstar,对应 #140)**:控制端开启防窥后,采集与输入切到 KWin 虚拟输出,物理屏关闭或以壁纸遮挡,本地键鼠暂停;主机进程以任何方式退出都会恢复屏幕和输入。需要 `kscreen-doctor` 与 uinput 权限。
KDE Wayland hosts: privacy screen (privacy / screen-off) switches capture and input to a KWin virtual output and blanks or covers the physical display; local input is paused and restored on any host exit. Requires `kscreen-doctor` and uinput access.
- 已知限制:Mac 控制端的防窥菜单切换后仍显示“不启用”,实际模式正确;X11 与其他 Wayland 桌面暂不支持。
Known limitation: the Mac viewer menu still shows "off" after switching; X11 and other Wayland desktops are not supported yet.
### 验证范围 / Validation
单元测试与 CI。防窥模式由贡献者在 KDE Wayland 实机验证;维护者尚未用官方客户端复测。
### 下载 / Download
`uu-remote-linux_0.2.43_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.43-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.43`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
Mac 控制端防窥菜单正确显示当前模式。/ The Mac viewer privacy menu now shows the active mode.
### 修复 / Fixed
- **Mac 控制端防窥状态回显(#147、#148,感谢 @ferstar)**:防窥切换应答与 SystemMetrics 改经 TEXT 通道发送(TEXT 打开前排队,metrics 只保留最新一份),SystemMetrics 带上报告的分节列表并报告当前防窥模式,修复 v0.2.43 中菜单切换后仍显示“不启用”的问题。
Privacy replies and SystemMetrics are now also delivered over the TEXT channel (queued until it opens, keeping only the latest metrics); SystemMetrics lists its reported sections and the current privacy mode, so the Mac viewer menu no longer shows "off" after switching.
### 验证范围 / Validation
单元测试与 CI。贡献者在 KDE Wayland + Mac 控制端实机验证;维护者尚未用 Windows/iOS/Android 控制端复测。
### 下载 / Download
`uu-remote-linux_0.2.44_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.44-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.44`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
控制端远程窗口不再被本地输入法截获按键。/ The viewer's remote window no longer lets the local IME swallow keys.
### 修复 / Fixed
- **控制端本地输入法截获按键(#149、#150,感谢 @xfjm136)**:SDL 远程桌面窗口创建后关闭本地文本输入,按键只按物理键转发,由被控端输入法处理;修复本地与远端都用 Shift 切换中英文时,Shift 等按键被本地输入法吞掉的问题。不修改系统输入法设置,GTK 启动器不受影响。
The SDL remote desktop window now disables local text input after creation, so keys are forwarded as physical keys and the remote IME handles composition; Shift and similar keys are no longer swallowed by the local IME. System IME settings and the GTK launcher are unchanged.
### 验证范围 / Validation
单元测试(含 SDL dummy 子进程测试)与 CI。贡献者在 KDE Wayland + Fcitx5 连接 Windows 实机验证;其他桌面/输入法后端未复测。
### 下载 / Download
`uu-remote-linux_0.2.45_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.45-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.45`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+13
View File
@@ -0,0 +1,13 @@
Linux 复制的文本可直接粘贴到 Windows 控制端。/ Text copied on Linux now pastes in the Windows viewer.
### 修复 / Fixed
- **Linux → Windows 文本剪贴板无法粘贴(#151,感谢 @afwer1231 的定位)**:主机提供 Unicode 文本格式时,格式名改用官方 Windows 端的 `predefined_13`(id 仍为 13)。此前的 `CF_UNICODETEXT` 名字会让 Windows 控制端注册一个同名的自定义格式,文本虽已到达但普通粘贴读不到。Mac 控制端按 id 13 识别,不受影响。
The host now names its Unicode text offer `predefined_13` (id 13), as official Windows peers do. The previous `CF_UNICODETEXT` name made the Windows viewer register a custom format of that name, so the text arrived but normal paste could not read it. The Mac viewer matches by id 13 and is unaffected.
### 验证范围 / Validation
单元测试与 CI;格式名依据官方 Windows/Mac 程序中的字符串对照(推断)。尚未在 Windows 控制端实机验证。
### 下载 / Download
`uu-remote-linux_0.2.46_<amd64|arm64>.deb`,或 `uu-remote-linux-v0.2.46-<x86_64|aarch64>-linux.tar.gz`(解压后运行 `./install.sh`),或 `docker pull ghcr.io/vallierdev/uu-remote-linux:v0.2.46`(x86_64)。
**非官方项目,与网易无关。** / **Unofficial, not affiliated with NetEase.**
+51
View File
@@ -0,0 +1,51 @@
# SDL viewer video scheduling
## Problem and cause
The SDL viewer previously consumed at most one compressed access unit per 8 ms
tick: approximately 125 units/s. With one unit per picture, sustained 144 FPS
input can overflow its bounded queue even when decoding keeps up. Lost compressed
units can break reference-frame dependencies, causing repeated decoder resets
and keyframe recovery. Increasing queue capacity alone only delays the overflow.
## Implementation
Each tick feeds queued compressed units to the existing decoder in FIFO order,
up to 8 units. A 4 ms elapsed-work budget is checked between calls. The viewer
then presents only the newest completed picture, avoiding redundant presentation
of older decoded pictures. It also polls asynchronous decoder output on idle ticks.
The compressed queue holds 8 units instead of 3 to absorb short presentation
stalls; processing starts immediately without waiting for a full batch. Actual
compressed-unit loss still resets the decoder and uses the existing keyframe
gate and PLI requests. Decoder interfaces, counters and opt-in diagnostic dumps
remain available; the presentation counter counts pictures actually presented.
There are no new settings or protocol fields.
## Verification
The desktop regression tests simulate 8 seconds of 144 units/s input and 125
processing ticks/s. The old one-unit policy drops 150 units with capacity 3 and
145 with capacity 8. Bounded batching delivers all 1,152 units to a mock decoder
in order without compressed-unit loss or resets, presenting at most once per tick.
Other tests cover newest-picture selection, idle asynchronous output, recovery
after real queue overflow, and count/time budgets leaving work for the next tick.
Budget tests inject elapsed time internally rather than depending on CI timing.
Run the full viewer checks without test filters or skips:
```sh
cargo test --locked --features native-viewer,viewer-sdl --bin uuremote-viewer
cargo build --locked --features native-viewer,viewer-sdl --bin uuremote-viewer
```
## Limits and scope
The 4 ms budget cannot interrupt an already-blocked decoder call and does not
bound the subsequent presentation call. Slow decoding or rendering can still
overflow the queue. This adds no hardware decoding and guarantees neither stable
144 FPS nor 144 distinct displayed pictures on a 90 Hz screen.
Startup timeout, stream-profile synchronization, gamepad/rumble and installation
changes are outside this patch.
Implementation and regression tests were prepared with Codex assistance.
+67
View File
@@ -0,0 +1,67 @@
#!/bin/sh
# Build uu-remote-linux_<version>_<arch>.deb from release binaries.
# usage: packaging/deb/build-deb.sh VERSION BIN_DIR OUT_DIR (VERSION without the leading v)
set -eu
version=$1 bin=$2 out=$3
here=$(cd "$(dirname "$0")" && pwd) root=$(cd "$here/../.." && pwd)
case $(uname -m) in x86_64) arch=amd64 ;; aarch64) arch=arm64 ;; *) echo "unsupported arch" >&2; exit 1 ;; esac
pkg=$(mktemp -d)
trap 'rm -rf "$pkg"' EXIT
install -Dm755 "$bin/uuremote-server" "$pkg/usr/bin/uuremote-server"
[ -f "$bin/uuremote-viewer" ] && install -Dm755 "$bin/uuremote-viewer" "$pkg/usr/bin/uuremote-viewer"
for lib in libuu-wayland.so libuu-portal.so; do
[ -f "$bin/$lib" ] && install -Dm644 "$bin/$lib" "$pkg/usr/lib/uu-remote-linux/$lib"
done
install -Dm644 "$here/uuremote-native.service" "$pkg/usr/lib/systemd/user/uuremote-native.service"
install -Dm644 "$root/contrib/desktop/uu-remote-linux.desktop" "$pkg/usr/share/applications/uu-remote-linux.desktop"
[ -f "$pkg/usr/bin/uuremote-viewer" ] && install -Dm644 "$root/contrib/desktop/uu-remote-linux-viewer.desktop" "$pkg/usr/share/applications/uu-remote-linux-viewer.desktop"
install -Dm644 "$root/contrib/desktop/uu-remote-linux.svg" "$pkg/usr/share/icons/hicolor/scalable/apps/uu-remote-linux.svg"
install -Dm644 "$root/LICENSE" "$pkg/usr/share/doc/uu-remote-linux/copyright"
# uinput access is opt-in: it lets the service inject input into the whole seat.
printf '%s\n' 'KERNEL=="uinput", SUBSYSTEM=="misc", OPTIONS+="static_node=uinput", TAG+="uaccess"' \
> "$pkg/usr/share/doc/uu-remote-linux/60-uu-remote-linux-uinput.rules"
size=$(du -sk "$pkg/usr" | cut -f1)
# Library dependencies from the binaries themselves (the server hard, the viewer recommended).
shlibdeps() {
work=$(mktemp -d); mkdir "$work/debian"
printf 'Source: uu-remote-linux\n\nPackage: uu-remote-linux\nArchitecture: any\n' > "$work/debian/control"
(cd "$work" && dpkg-shlibdeps -O --ignore-missing-info "$1" 2>/dev/null) | sed -n 's/^shlibs:Depends=//p'
rm -rf "$work"
}
depends=$(shlibdeps "$pkg/usr/bin/uuremote-server")
recommends=""
[ -f "$pkg/usr/bin/uuremote-viewer" ] && recommends=$(shlibdeps "$pkg/usr/bin/uuremote-viewer")
[ -n "$depends" ] || { echo "dpkg-shlibdeps produced no dependencies" >&2; exit 1; }
mkdir -p "$pkg/DEBIAN"
cat > "$pkg/DEBIAN/control" <<CONTROL
Package: uu-remote-linux
Version: $version
Architecture: $arch
Maintainer: VallierDev <[email protected]>
Installed-Size: $size
Depends: $depends, ffmpeg
Recommends: ${recommends:+$recommends, }libwayland-client0, libxkbcommon0
Suggests: libpipewire-0.3-0, libei1, wl-clipboard
Section: net
Priority: optional
Homepage: https://github.com/VallierDev/uu-remote-linux
Description: Unofficial native Linux host for NetEase UU Remote
Lets the official NetEase UU Remote clients control this Linux desktop
(X11, wlroots Wayland and GNOME/KDE Wayland through runtime plugins).
Includes the experimental uuremote-viewer. Not affiliated with NetEase.
CONTROL
cat > "$pkg/DEBIAN/postinst" <<'POSTINST'
#!/bin/sh
set -e
if [ "$1" = configure ]; then
cat <<'MSG'
uu-remote-linux installed. As your desktop user (not root):
uuremote-server login # scan the QR code with the UU Remote app
systemctl --user enable --now uuremote-native.service # start with the graphical session
Optional uinput keyboard/mouse (Wayland): see /usr/share/doc/uu-remote-linux/60-uu-remote-linux-uinput.rules
MSG
fi
POSTINST
chmod 755 "$pkg/DEBIAN/postinst"
mkdir -p "$out"
dpkg-deb --build --root-owner-group "$pkg" "$out/uu-remote-linux_${version}_${arch}.deb"
+17
View File
@@ -0,0 +1,17 @@
# Installed by the uu-remote-linux .deb as a systemd *user* unit; enable it per user:
# systemctl --user enable --now uuremote-native.service
# GNOME and KDE import DISPLAY / WAYLAND_DISPLAY into the user manager when the graphical session
# starts. Desktops that do not (e.g. Xfce) can add a drop-in with Environment=DISPLAY=:0.
[Unit]
Description=UU Remote Linux host (unofficial)
After=graphical-session.target
PartOf=graphical-session.target
[Service]
Environment=RUST_LOG=info
ExecStart=/usr/bin/uuremote-server
Restart=always
RestartSec=5
[Install]
WantedBy=graphical-session.target
+131
View File
@@ -0,0 +1,131 @@
#!/bin/sh
# Install uu-remote-linux from the release tarball for the current desktop user, and install FFmpeg
# (needed for desktop video) through the system package manager when it is missing.
# usage: ./install.sh [--yes] [--no-ffmpeg]
# --yes install FFmpeg without asking
# --no-ffmpeg only check FFmpeg, never install it
set -eu
assume_yes=0 ffmpeg_install=1
for arg in "$@"; do
case $arg in
-y|--yes) assume_yes=1 ;;
--no-ffmpeg) ffmpeg_install=0 ;;
-h|--help) sed -n '2,6p' "$0" | sed 's/^# \{0,1\}//'; exit 0 ;;
*) echo "unknown option: $arg (see --help)" >&2; exit 2 ;;
esac
done
if [ "$(id -u)" = 0 ]; then
echo "Run this as your desktop user, not root: the host is a per-user service. It asks for sudo only to install FFmpeg." >&2
exit 1
fi
src=$(cd "$(dirname "$0")" && pwd)
bin=$HOME/.local/bin lib=$HOME/.local/lib/uu-remote-linux share=$HOME/.local/share
unit_dir=${XDG_CONFIG_HOME:-$HOME/.config}/systemd/user
# A running binary cannot be overwritten in place ("text file busy"): copy, then rename.
put() { install -Dm"$1" "$2" "$3.new" && mv -f "$3.new" "$3"; }
[ -f "$src/uuremote-server" ] || { echo "uuremote-server not found next to install.sh" >&2; exit 1; }
put 755 "$src/uuremote-server" "$bin/uuremote-server"
[ -f "$src/uuremote-viewer" ] && put 755 "$src/uuremote-viewer" "$bin/uuremote-viewer"
for so in libuu-wayland.so libuu-portal.so; do
[ -f "$src/$so" ] && put 644 "$src/$so" "$lib/$so"
done
if [ -d "$src/contrib/desktop" ]; then
put 644 "$src/contrib/desktop/uu-remote-linux.svg" "$share/icons/hicolor/scalable/apps/uu-remote-linux.svg"
put 644 "$src/contrib/desktop/uu-remote-linux.desktop" "$share/applications/uu-remote-linux.desktop"
[ -f "$bin/uuremote-viewer" ] && put 644 "$src/contrib/desktop/uu-remote-linux-viewer.desktop" "$share/applications/uu-remote-linux-viewer.desktop"
fi
echo "Installed uuremote-server to $bin"
# Same unit as the .deb, pointing at ~/.local/bin. An existing unit is the user's: leave it alone.
if [ -f "$unit_dir/uuremote-native.service" ]; then
echo "Kept existing $unit_dir/uuremote-native.service"
else
mkdir -p "$unit_dir"
cat > "$unit_dir/uuremote-native.service" <<'UNIT'
[Unit]
Description=UU Remote Linux host (unofficial)
After=graphical-session.target
PartOf=graphical-session.target
[Service]
Environment=RUST_LOG=info
ExecStart=%h/.local/bin/uuremote-server
Restart=always
RestartSec=5
[Install]
WantedBy=graphical-session.target
UNIT
echo "Created $unit_dir/uuremote-native.service"
fi
if command -v systemctl >/dev/null 2>&1; then systemctl --user daemon-reload 2>/dev/null || true; fi
# FFmpeg with libx264 is required: without it the viewer waits on 正在传输画面 forever.
ffmpeg_ok() { command -v ffmpeg >/dev/null 2>&1 && ffmpeg -hide_banner -encoders 2>/dev/null | grep -qw libx264; }
ffmpeg_cmd=""
ffmpeg_note=""
if command -v apt-get >/dev/null 2>&1; then
ffmpeg_cmd="apt-get update && apt-get install -y ffmpeg"
elif command -v pacman >/dev/null 2>&1; then
ffmpeg_cmd="pacman -S --needed --noconfirm ffmpeg"
elif command -v dnf >/dev/null 2>&1; then
# Fedora's own ffmpeg-free has no libx264; the full build is in RPM Fusion, which we do not enable for you.
if dnf repolist --enabled 2>/dev/null | grep -qi rpmfusion-free; then
ffmpeg_cmd="dnf install -y --allowerasing ffmpeg"
else
ffmpeg_note="Enable RPM Fusion (https://rpmfusion.org/Configuration), then: sudo dnf install --allowerasing ffmpeg"
fi
elif command -v zypper >/dev/null 2>&1; then
ffmpeg_note="openSUSE's ffmpeg has no libx264; add the Packman repository, then: sudo zypper install ffmpeg"
else
ffmpeg_note="Install FFmpeg with libx264 from your distribution, or set \"ffmpeg_root\" in ~/.config/uuremote/config.json"
fi
ffmpeg_ready=1
if ffmpeg_ok; then
echo "FFmpeg with libx264: found"
else
if command -v ffmpeg >/dev/null 2>&1; then echo "FFmpeg is installed but has no libx264."; else echo "FFmpeg is not installed."; fi
if [ "$ffmpeg_install" = 1 ] && [ -n "$ffmpeg_cmd" ]; then
answer=n
if [ "$assume_yes" = 1 ]; then
answer=y
elif [ -t 0 ]; then
printf 'Install it now with: sudo sh -c "%s"? [Y/n] ' "$ffmpeg_cmd"
read -r answer || answer=n
case $answer in ""|y|Y|yes|YES) answer=y ;; esac
fi
if [ "$answer" = y ]; then
if [ "$(id -u)" != 0 ] && ! command -v sudo >/dev/null 2>&1; then
echo "sudo is not available; run as root: $ffmpeg_cmd" >&2
else
sudo sh -c "$ffmpeg_cmd" || echo "FFmpeg installation failed." >&2
fi
fi
fi
if ffmpeg_ok; then
echo "FFmpeg with libx264: installed"
else
ffmpeg_ready=0
if [ -n "$ffmpeg_cmd" ]; then echo "Install it with: sudo sh -c \"$ffmpeg_cmd\""; else echo "$ffmpeg_note"; fi
fi
fi
case ":$PATH:" in *":$bin:"*) ;; *) echo "Note: $bin is not on PATH; add it or call $bin/uuremote-server directly." ;; esac
cat <<NEXT
Next steps (as this user, inside the graphical session):
uuremote-server login # scan the QR code with the UU Remote app
systemctl --user enable --now uuremote-native.service # start with the graphical session
Desktops that do not export DISPLAY to systemd (e.g. Xfce) need a drop-in; see README step 4.
NEXT
if [ "$ffmpeg_ready" = 0 ]; then
echo "WARNING: desktop video will not start until FFmpeg with libx264 is installed." >&2
exit 1
fi
+14
View File
@@ -78,6 +78,20 @@ extern "C" {
fn uu_assist_ui_set(id: *const libc::c_char, code: *const libc::c_char, allowed: libc::c_int, verify: libc::c_int, refresh: libc::c_int, has_custom: libc::c_int);
fn uu_assist_ui_take_command(arg: *mut libc::c_char, len: libc::size_t) -> libc::c_int;
fn uu_assist_ui_close();
fn uu_ui_set_problem(summary: *const libc::c_char, text: *const libc::c_char, notify: libc::c_int) -> libc::c_int;
}
/// A problem only the person at the desktop can fix: a red line in the host window (`None` clears it)
/// and, with `notify`, a desktop notification, or the host window opened when no notification daemon
/// answers. Returns whether the person was told now.
pub fn show_problem(summary: &str, text: Option<&str>, notify: bool) -> bool {
#[cfg(uu_gtk)] {
let summary = std::ffi::CString::new(summary).unwrap_or_default();
let text = text.map(|t| std::ffi::CString::new(t).unwrap_or_default());
let text = text.as_ref().map_or(std::ptr::null(), |t| t.as_ptr());
unsafe { uu_ui_set_problem(summary.as_ptr(), text, i32::from(notify)) >= 0 }
}
#[cfg(not(uu_gtk))] { let _ = (summary, text, notify); false }
}
/// "243829726" -> "243 829 726", as the official client shows device IDs.
+97 -7
View File
@@ -1,7 +1,6 @@
//! Desktop sound for the viewer's 声音 menu: the default output's monitor (PulseAudio or
//! PipeWire-pulse) is encoded to Opus and sent on the negotiated audio m-line.
//! Encoding runs in this process with the `inproc-av` feature (unless `UU_FFMPEG_ROOT` is set),
//! otherwise an FFmpeg child process does it.
//! inproc-av uses libpulse/libopus directly; other builds and native failures use FFmpeg.
//! PipeWire monitors ignore the sink's mute by default, so 被控端静音运行 keeps the stream audible.
//! `UU_AUDIO=0` disables it; `UU_AUDIO_SOURCE` picks another Pulse source.
@@ -57,11 +56,38 @@ fn read_packets(stdout: impl Read, tx: &tokio::sync::mpsc::Sender<bytes::Bytes>)
fn start(source: &str, tx: tokio::sync::mpsc::Sender<bytes::Bytes>)
-> Result<(Stopper, tokio::task::JoinHandle<Result<(), String>>), String> {
let stop = Arc::new(AtomicBool::new(false));
#[cfg(feature = "inproc-av")]
if crate::inproc_encoder::selected() {
let job = tokio::task::spawn_blocking({
let (stop, source) = (stop.clone(), source.to_owned());
move || crate::inproc_encoder::run_audio(&source, tx, stop)
#[cfg(all(target_os = "linux", feature = "inproc-av"))]
if !crate::inproc_encoder::disabled() {
let source = std::ffi::CString::new(source).map_err(|_| "Audio source contains NUL")?;
let worker_stop = stop.clone();
let job = tokio::task::spawn_blocking(move || {
match native_packets(&source, &tx, &worker_stop) {
Ok(()) => Ok(()),
Err(error) if !worker_stop.load(Ordering::Relaxed) && !tx.is_closed() => {
log::warn!("In-process audio unavailable: {error}; falling back to FFmpeg Opus");
let mut child = spawn_encoder(source.to_str().map_err(|_| "Invalid audio source")?)?;
let stdout = child.stdout.take().ok_or("Encoder stdout missing")?;
// Supervise the process separately so cancellation also interrupts a blocked read.
let (done_tx, done_rx) = std::sync::mpsc::channel();
let reader_tx = tx.clone();
let reader = std::thread::spawn(move || {
let result = read_packets(stdout, &reader_tx);
let _ = done_tx.send(result);
});
let result = loop {
match done_rx.recv_timeout(Duration::from_millis(20)) {
Ok(result) => break result,
Err(std::sync::mpsc::RecvTimeoutError::Disconnected) => break Err("Audio reader ended".into()),
Err(_) => if worker_stop.load(Ordering::Relaxed) || tx.is_closed() { break Ok(()); },
}
};
let _ = child.kill();
let _ = child.wait();
let _ = reader.join();
result
},
Err(_) => Ok(()),
}
});
return Ok((Stopper { stop, child: None }, job));
}
@@ -71,6 +97,37 @@ fn start(source: &str, tx: tokio::sync::mpsc::Sender<bytes::Bytes>)
Ok((Stopper { stop, child: Some(child) }, job))
}
#[cfg(all(target_os = "linux", feature = "inproc-av"))]
fn native_packets(source: &std::ffi::CStr, tx: &tokio::sync::mpsc::Sender<bytes::Bytes>, stop: &AtomicBool) -> Result<(), String> {
extern "C" {
fn uu_audio_open(source: *const libc::c_char) -> *mut libc::c_void;
fn uu_audio_packet(audio: *mut libc::c_void, packet: *mut u8, capacity: libc::c_int) -> libc::c_int;
fn uu_audio_close(audio: *mut libc::c_void);
}
struct Capture(*mut libc::c_void);
impl Drop for Capture {
fn drop(&mut self) { unsafe { uu_audio_close(self.0) }; }
}
let capture = Capture(unsafe { uu_audio_open(source.as_ptr()) });
if capture.0.is_null() { return Err("Native audio initialization failed".into()); }
let mut packet = [0; 4000];
let mut last_packet = std::time::Instant::now();
let mut announced = false;
while !stop.load(Ordering::Relaxed) && !tx.is_closed() {
let size = unsafe { uu_audio_packet(capture.0, packet.as_mut_ptr(), packet.len() as libc::c_int) };
if size < 0 { return Err(format!("Native audio capture/encode failed: {size}")); }
if size == 0 {
if last_packet.elapsed() >= Duration::from_secs(5) { return Err("Native audio capture timed out".into()); }
std::thread::sleep(Duration::from_millis(2));
continue;
}
if !announced { log::info!("Desktop audio pipeline=in-process opus 48k stereo"); announced = true; }
last_packet = std::time::Instant::now();
if tx.blocking_send(bytes::Bytes::copy_from_slice(&packet[..size as usize])).is_err() { break; }
}
Ok(())
}
fn closed(pc: &RTCPeerConnection) -> bool {
matches!(pc.connection_state(), RTCPeerConnectionState::Closed | RTCPeerConnectionState::Failed)
}
@@ -149,3 +206,36 @@ pub async fn probe(seconds: u64) -> Result<(), String> {
let result = job.await.map_err(|e| e.to_string())?;
if packets == 0 { result } else { Ok(()) }
}
#[cfg(all(test, target_os = "linux", feature = "inproc-av"))]
mod native_tests {
use super::*;
#[tokio::test]
#[ignore = "requires a running PulseAudio or PipeWire-pulse server"]
async fn native_opus_packets_decode_and_capture_stops_promptly() {
extern "C" {
fn opus_decoder_create(rate: i32, channels: i32, error: *mut i32) -> *mut libc::c_void;
fn opus_decode(decoder: *mut libc::c_void, data: *const u8, length: i32, pcm: *mut i16, size: i32, fec: i32) -> i32;
fn opus_decoder_destroy(decoder: *mut libc::c_void);
}
let source = std::ffi::CString::new("@DEFAULT_MONITOR@").unwrap();
let (tx, mut rx) = tokio::sync::mpsc::channel(2);
let stop = Arc::new(AtomicBool::new(false));
let worker_stop = stop.clone();
let job = tokio::task::spawn_blocking(move || native_packets(&source, &tx, &worker_stop));
let stopper = Stopper { stop, child: None };
let packet = tokio::time::timeout(Duration::from_secs(6), rx.recv()).await.unwrap().unwrap();
let mut error = 0;
let decoder = unsafe { opus_decoder_create(48000, 2, &mut error) };
assert_eq!(error, 0);
assert!(!decoder.is_null());
let mut pcm = [0; 960 * 2];
let samples = unsafe { opus_decode(decoder, packet.as_ptr(), packet.len() as i32, pcm.as_mut_ptr(), 960, 0) };
unsafe { opus_decoder_destroy(decoder) };
assert_eq!(samples, 960);
drop(rx);
drop(stopper);
tokio::time::timeout(Duration::from_secs(1), job).await.unwrap().unwrap().unwrap();
}
}
+143 -1
View File
@@ -91,6 +91,48 @@ pub struct UUAuthClient {
guest_id: Option<String>,
}
/// QR failures are safe to display: never retain a URL, source error or response body.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum QrRequestErrorKind { Timeout, Connect, Decode, Body, Request }
impl QrRequestErrorKind {
fn from_reqwest(error: &reqwest::Error) -> Self {
if error.is_timeout() { Self::Timeout }
else if error.is_connect() { Self::Connect }
else if error.is_decode() { Self::Decode }
else if error.is_body() { Self::Body }
else { Self::Request }
}
fn label(self) -> &'static str {
match self { Self::Timeout => "timeout", Self::Connect => "connect", Self::Decode => "decode",
Self::Body => "body", Self::Request => "request" }
}
}
#[derive(Debug)]
pub struct QrRequestError {
pub kind: QrRequestErrorKind,
phase: &'static str,
elapsed_ms: u128,
http_status: Option<u16>,
}
impl std::fmt::Display for QrRequestError {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
write!(f, "phase={} kind={} elapsed_ms={} http_status={:?}",
self.phase, self.kind.label(), self.elapsed_ms, self.http_status)
}
}
impl QrRequestError {
pub fn response_received(&self) -> bool { self.http_status.is_some() }
fn new(kind: QrRequestErrorKind, phase: &'static str, started: std::time::Instant, http_status: Option<u16>) -> Self {
Self { kind, phase, elapsed_ms: started.elapsed().as_millis(), http_status }
}
}
async fn send_qr_request(request: reqwest::RequestBuilder, started: std::time::Instant) -> Result<(u16, serde_json::Value), QrRequestError> {
let resp = request.send().await.map_err(|e| QrRequestError::new(QrRequestErrorKind::from_reqwest(&e), "send", started, None))?;
let status = resp.status().as_u16();
let value = resp.json().await.map_err(|e| QrRequestError::new(QrRequestErrorKind::from_reqwest(&e), "response", started, Some(status)))?;
Ok((status, value))
}
/// Transport failures name only the outer request; the cause (certificate, proxy, DNS,
/// timeout) lives in the source chain. URL user-info (proxy credentials) and query
/// strings are removed before the chain is shown.
@@ -121,9 +163,27 @@ fn redact_urls(text: &str) -> String {
out
}
/// Cloud API and signaling clients ignore ambient HTTP/HTTPS proxy settings by default: a local
/// proxy that intercepts TLS breaks login and signaling. `UU_USE_PROXY=1` opts back
/// into reqwest's standard proxy environment handling.
pub fn http_client_builder() -> reqwest::ClientBuilder {
let builder = reqwest::Client::builder();
if proxy_enabled() {
builder
} else {
builder.no_proxy()
}
}
pub(crate) fn proxy_enabled() -> bool {
std::env::var("UU_USE_PROXY").ok().as_deref().is_some_and(proxy_requested)
}
fn proxy_requested(value: &str) -> bool {
matches!(value.trim().to_ascii_lowercase().as_str(), "1" | "true" | "yes" | "on")
}
impl UUAuthClient {
pub fn new(creds: Credentials) -> Self {
let http = reqwest::Client::builder()
let http = http_client_builder()
.timeout(std::time::Duration::from_secs(12))
.build()
.unwrap();
@@ -236,6 +296,27 @@ impl UUAuthClient {
Ok((status, value))
}
/// Signed POST with an optional JSON body (None = empty body, like Moya `requestPlain`) and an
/// explicit timeout. The official clients long-poll the QR status with a 60 s request timeout.
pub async fn post_with_timeout(&self, path: &str, body: Option<&serde_json::Value>, timeout: std::time::Duration) -> Result<(u16, serde_json::Value), QrRequestError> {
let started = std::time::Instant::now();
let body_str = body.map(serde_json::to_string).transpose()
.map_err(|_| QrRequestError::new(QrRequestErrorKind::Request, "encode", started, None))?.unwrap_or_default();
let request = self.http.post(format!("{}{}", BASE_URL, path)).timeout(timeout)
.headers(self.build_headers("POST", path, &body_str)).body(body_str);
send_qr_request(request, started).await
}
/// Signed JSON POST to another API host (the signature covers the path only).
pub async fn post_json_url(&self, base: &str, path: &str, body: &serde_json::Value) -> Result<(u16, serde_json::Value), String> {
let body_str = serde_json::to_string(body).map_err(|e| e.to_string())?;
let resp = self.http.post(format!("{base}{path}"))
.headers(self.build_headers("POST", path, &body_str)).body(body_str)
.send().await.map_err(|e| format!("HTTP post {path} failed: {}", transport_error(&e)))?;
let status = resp.status().as_u16();
Ok((status, resp.json().await.unwrap_or(serde_json::Value::Null)))
}
/// Guest APIs use requestPlain for empty requests; sign the actual empty body.
/// Errors intentionally exclude response text and URL (both can contain secrets).
pub async fn assist_post(&self, path: &str, body: Option<&serde_json::Value>) -> Result<(u16, serde_json::Value), String> {
@@ -346,4 +427,65 @@ mod guest_tests {
let text = super::redact_urls("proxy http://user:[email protected]:3128 failed for (https://api.example/p?token=abc)");
assert_eq!(text, "proxy http://proxy.example:3128 failed for (https://api.example/p)");
}
#[test]
fn proxy_opt_in_accepts_only_explicit_truthy_values() {
for value in ["1", "true", "TRUE", " yes ", "On"] { assert!(super::proxy_requested(value)); }
for value in ["", "0", "false", "no", "off", "2"] { assert!(!super::proxy_requested(value)); }
}
}
#[cfg(test)]
mod qr_request_tests {
use super::*;
use std::time::{Duration, Instant};
use tokio::io::{AsyncReadExt, AsyncWriteExt};
// Synthetic, loopback-only responses: no account, device, proxy or live login API.
async fn response(reply: &'static [u8], stall: bool) -> QrRequestError {
let listener = tokio::net::TcpListener::bind("127.0.0.1:0").await.unwrap();
let addr = listener.local_addr().unwrap();
let server = tokio::spawn(async move {
let (mut socket, _) = listener.accept().await.unwrap();
let mut request = [0u8; 4096];
let _ = socket.read(&mut request).await.unwrap();
socket.write_all(reply).await.unwrap();
if stall { std::future::pending::<()>().await; }
});
let request = reqwest::Client::builder().no_proxy().build().unwrap()
.post(format!("http://fixture-user:fixture-password@{addr}/fixture-path?token=fixture-ticket"))
.timeout(Duration::from_secs(2));
let error = send_qr_request(request, Instant::now()).await.unwrap_err();
server.abort();
let output = format!("{error} {error:?}");
for secret in ["fixture-user", "fixture-password", "fixture-path", "fixture-ticket", "fixture-body", "127.0.0.1", "http://"] {
assert!(!output.contains(secret));
}
error
}
#[tokio::test]
async fn qr_request_distinguishes_send_timeout_body_timeout_and_bad_json_without_secrets() {
let error = response(b"", true).await;
assert_eq!((error.kind, error.phase, error.http_status), (QrRequestErrorKind::Timeout, "send", None));
assert!(!error.response_received());
let error = response(b"HTTP/1.1 200 OK\r\nContent-Length: 100\r\n\r\n", true).await;
assert_eq!((error.kind, error.phase, error.http_status), (QrRequestErrorKind::Timeout, "response", Some(200)));
assert!(error.response_received());
let error = response(b"HTTP/1.1 502 Bad Gateway\r\nContent-Length: 12\r\n\r\nfixture-body", false).await;
assert_eq!((error.kind, error.phase, error.http_status), (QrRequestErrorKind::Decode, "response", Some(502)));
assert!(error.response_received());
}
#[tokio::test]
async fn qr_connection_failure_is_not_a_timeout() {
let listener = tokio::net::TcpListener::bind("127.0.0.1:0").await.unwrap();
let addr = listener.local_addr().unwrap();
drop(listener);
let request = reqwest::Client::builder().no_proxy().build().unwrap()
.post(format!("http://{addr}/fixture-ticket")).timeout(Duration::from_secs(2));
let error = send_qr_request(request, Instant::now()).await.unwrap_err();
assert_eq!((error.kind, error.phase, error.http_status), (QrRequestErrorKind::Connect, "send", None));
assert!(!format!("{error} {error:?}").contains("fixture-ticket"));
}
}
+59 -22
View File
@@ -27,21 +27,50 @@ pub fn h264_device_capability(
fps: i32,
codec_impl: i32,
) -> Value {
device_capability(client_id, ice_id, display_id, fps, codec_impl, false)
device_capability(client_id, ice_id, display_id, fps, codec_impl, false, false)
}
pub fn device_capability(client_id: &str, ice_id: &str, display_id: i32, fps: i32, codec_impl: i32, hevc: bool) -> Value {
let mut codecs = vec![json!({"video_codec": VIDEO_CODEC_H264, "chroma_sampling": 1,
"codec_impl": codec_impl, "bit_depth": 8})];
// Official VideoCodecCapability::SerializeJson uses the same fields for CodecType H265=2.
if hevc { codecs.push(json!({"video_codec": 2, "chroma_sampling": 1, "codec_impl": codec_impl, "bit_depth": 8})); }
/// Shape of the official Windows host's `forward_setting` (observed from a live 4.37 host):
/// `{client_id, data: {device_capability: {display_info, ice_id, video_codec_capability}, type}}`.
/// The payload sits under `data.device_capability` with `type` beside it. The earlier flat shape
/// (`type` at the top, fields directly in `data`) was not recognised by the iPhone client, which
/// then kept quality and chroma locked at their defaults (#49). Only 8-bit and the chroma formats
/// the encoder really produces are listed, each with its maximum size: the official viewer treats a
/// 0x0 entry as unsupported (#77; the 4.37 host we copied had a GTX 660 without HEVC/4:4:4).
pub fn device_capability(client_id: &str, ice_id: &str, display_id: i32, fps: i32, codec_impl: i32, hevc: bool, full_chroma: bool) -> Value {
let mut codecs = Vec::new();
for codec in [VIDEO_CODEC_H264].into_iter().chain(hevc.then_some(2)) {
for chroma in [1].into_iter().chain(full_chroma.then_some(3)) {
let (width, height) = (3840, 2160);
codecs.push(json!({"video_codec": codec, "chroma_sampling": chroma, "codec_impl": codec_impl,
"bit_depth": 8, "width": width, "height": height}));
}
}
json!({
"client_id": client_id,
"type": "device_capability",
"data": {
"display_info": [{"id": display_id, "fps": fps, "type": 0, "hdr": 0}],
"video_codec_capability": codecs,
"ice_id": ice_id
"device_capability": {
"display_info": [{"id": display_id, "fps": fps, "type": 0, "hdr": -1}],
"video_codec_capability": codecs,
"ice_id": ice_id
},
"type": "device_capability"
}
})
}
/// Official `sender_para_info` (capture and encoder names; the Windows host sends "DXGI" /
/// "NVIDIA NVENC") for the single video track.
pub fn sender_para_info(client_id: &str, ice_id: &str, capture_impl: &str, encoder_impl: &str) -> Value {
json!({
"client_id": client_id,
"data": {
"sender_para_info": {
"capture_impl": capture_impl, "encoder_impl": encoder_impl, "ice_id": ice_id,
"sender_media_infos": [{"capture_impl": capture_impl, "encoder_impl": encoder_impl, "video_track_index": 0}],
"video_track_index": 0
},
"type": "sender_para_info"
}
})
}
@@ -51,12 +80,20 @@ mod tests {
use super::*;
#[test]
fn hevc_capability_uses_official_codec_enum_and_420_only() {
let payload = device_capability("client-example", "ice-example", 0, 60, 5, true);
assert_eq!(payload["data"]["video_codec_capability"], json!([
{"video_codec":1,"chroma_sampling":1,"codec_impl":5,"bit_depth":8},
{"video_codec":2,"chroma_sampling":1,"codec_impl":5,"bit_depth":8}]));
assert_eq!(device_capability("c", "i", 0, 60, 5, false)["data"]["video_codec_capability"].as_array().unwrap().len(), 1);
fn capability_uses_the_official_nested_shape_and_real_formats() {
let payload = device_capability("client-example", "ice-example", 0, 60, 5, true, true);
assert_eq!(payload["data"]["type"], "device_capability");
assert!(payload.get("type").is_none());
let caps = &payload["data"]["device_capability"]["video_codec_capability"];
assert_eq!(caps.as_array().unwrap().len(), 4);
assert_eq!(caps[0], json!({"video_codec":1,"chroma_sampling":1,"codec_impl":5,"bit_depth":8,"width":3840,"height":2160}));
assert_eq!(caps[3], json!({"video_codec":2,"chroma_sampling":3,"codec_impl":5,"bit_depth":8,"width":3840,"height":2160}));
assert_eq!(payload["data"]["device_capability"]["display_info"][0]["hdr"], -1);
let h264_420 = device_capability("c", "i", 0, 60, 5, false, false);
assert_eq!(h264_420["data"]["device_capability"]["video_codec_capability"].as_array().unwrap().len(), 1);
let sender = sender_para_info("c", "i", "X11", "NVIDIA NVENC");
assert_eq!(sender["data"]["type"], "sender_para_info");
assert_eq!(sender["data"]["sender_para_info"]["sender_media_infos"][0]["encoder_impl"], "NVIDIA NVENC");
}
#[test]
@@ -71,15 +108,15 @@ mod tests {
#[test]
fn device_capability_uses_object_data_and_string_ice_id() {
let payload = h264_device_capability("client-example", "ice-example", 11, 60, 0);
assert_eq!(payload["type"], "device_capability");
assert!(payload["data"].is_object());
assert_eq!(payload["data"]["ice_id"], "ice-example");
let display = &payload["data"]["display_info"][0];
let capability = &payload["data"]["device_capability"];
assert!(capability.is_object());
assert_eq!(capability["ice_id"], "ice-example");
let display = &capability["display_info"][0];
assert_eq!(display.as_object().unwrap().len(), 4);
assert_eq!(display["id"], 11);
assert_eq!(display["fps"], 60);
let codec = &payload["data"]["video_codec_capability"][0];
assert_eq!(codec.as_object().unwrap().len(), 4);
let codec = &capability["video_codec_capability"][0];
assert_eq!(codec.as_object().unwrap().len(), 6);
assert_eq!(codec["video_codec"], 1);
assert_eq!(codec["codec_impl"], 0);
assert_eq!(codec["bit_depth"], 8);
+22 -5
View File
@@ -46,14 +46,28 @@ unsafe fn x11_display_name() -> *const libc::c_char { b":0\0".as_ptr().cast() }
/// The X11 root can be resized while the host runs (RandR, xrdp reconnects); the
/// geometry read at startup then makes x11grab reject every new connection.
pub fn x11_resized() -> bool {
/// Re-reads the root size; None when the X11 engine is not in use or the query fails.
pub fn x11_size() -> Option<(u32, u32)> {
match unsafe { x11_refresh_geometry() } {
1 => true,
0 => false,
code => { log::warn!("X11 geometry query failed with code {code}"); false }
0 | 1 => x11_last_size(),
-1 => None,
code => { log::warn!("X11 geometry query failed with code {code}"); None }
}
}
/// The root size from the last refresh, without an X round trip (pointer mapping).
/// Display the X11 engine opened, once a capture has initialized it.
pub fn x11_display() -> Option<String> {
let name = unsafe { x11_display_name() };
if name.is_null() { None } else { Some(unsafe { std::ffi::CStr::from_ptr(name) }.to_string_lossy().into_owned()) }
}
pub fn x11_last_size() -> Option<(u32, u32)> {
let (mut w, mut h): (libc::c_int, libc::c_int) = (0, 0);
if unsafe { x11_get_dimensions(&mut w, &mut h) } != 0 || w <= 0 || h <= 0 { return None; }
Some((w as u32, h as u32))
}
pub struct ScreenCapture {
pub backend: crate::desktop_backend::DesktopBackend,
pub init_error: Option<String>,
@@ -68,8 +82,10 @@ pub struct ScreenCapture {
impl ScreenCapture {
pub fn open_portal(cancelled: &std::sync::atomic::AtomicBool) -> Result<Self, crate::portal::PortalError> {
let session = std::sync::Arc::new(crate::portal::PortalSession::open_cancellable(cancelled)?);
crate::portal::register(&session);
let (width, height) = session.size();
Ok(Self { backend: crate::desktop_backend::DesktopBackend::Portal, init_error: None,
display: "wayland:portal".into(), width: session.width, height: session.height,
display: "wayland:portal".into(), width, height,
portal: Some(session), kms: None, buffer: Mutex::new(Vec::new()) })
}
pub fn new() -> Result<Self, String> {
@@ -165,6 +181,7 @@ impl Drop for ScreenCapture {
/// Keep the display visible only while a peer is streaming; never unlock it.
pub fn keep_display_awake() -> Result<(), String> {
if crate::privacy_screen::active() { return Ok(()); }
if crate::desktop_backend::detect()? == crate::desktop_backend::DesktopBackend::Kms { return Ok(()); }
if crate::desktop_backend::detect()? == crate::desktop_backend::DesktopBackend::Portal {
return crate::desktop_power::wake();
+190 -19
View File
@@ -40,11 +40,13 @@ impl VideoCodec {
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub struct VideoSettings {
pub source_id: usize,
pub source_generation: u64,
pub fps: u32,
pub codec: VideoCodec,
pub quality: u64,
/// Viewer max_custom_bitrate (only used for QUALITY_CUSTOM): Mbit/s, or kbit/s above 1000.
pub custom_mbps: u32,
/// Viewer max_custom_bitrate in bits/s (only used for QUALITY_CUSTOM).
pub custom_bps: u32,
/// Scaled stream size (其他分辨率); None streams the native desktop size.
pub output: Option<(u32, u32)>,
/// CHROMA_420 or CHROMA_444 (真彩); 4:4:4 only when the encoder pipeline supports it.
@@ -52,7 +54,7 @@ pub struct VideoSettings {
}
impl Default for VideoSettings {
fn default() -> Self { Self { codec: VideoCodec::H264, fps: 60, quality: QUALITY_AUTO, custom_mbps: 0, output: None, chroma: CHROMA_420 } }
fn default() -> Self { let (source_id,source_generation)=crate::wayland::selection(); Self { source_id,source_generation, codec: VideoCodec::H264, fps: 60, quality: QUALITY_AUTO, custom_bps: 0, output: None, chroma: CHROMA_420 } }
}
/// Selectable smaller stream sizes with the desktop's aspect ratio (even dimensions).
@@ -84,8 +86,8 @@ impl VideoSettings {
QUALITY_GENERAL => Some(2_000),
QUALITY_HD => Some(8_000),
QUALITY_BLURAY => Some(20_000),
QUALITY_CUSTOM if self.custom_mbps > 0 =>
Some(if self.custom_mbps > 1_000 { self.custom_mbps } else { self.custom_mbps * 1_000 }.min(100_000)),
QUALITY_CUSTOM if self.custom_bps > 0 =>
Some((self.custom_bps / 1_000).clamp(1, 100_000)),
_ => None,
}
}
@@ -110,22 +112,67 @@ fn fps_from_option(value: u64) -> Option<u64> {
/// Applies a capture-setting RPC to `settings` and returns the RpcResponse payload (Message 22),
/// or None when the RPC is not a capture/fps/quality setting.
/// max_custom_bitrate (field 8) in bit/s: the mobile viewer sends 1_000_000 for 1 Mbps (#67). Values
/// that can only be a different unit stay usable instead of collapsing to a 1 kbit/s cap: below 1000
/// they are Mbit/s, below 200_000 kbit/s (no viewer offers custom rates under 200 kbit/s).
fn custom_bitrate_bps(value: u64) -> u32 {
let bps = if value < 1_000 { value * 1_000_000 } else if value < 200_000 { value * 1_000 } else { value };
bps.min(u64::from(u32::MAX)) as u32
}
#[cfg(test)]
pub fn handle_rpc(rpc: &[WireField], settings: &watch::Sender<VideoSettings>, native: (u32, u32)) -> Option<Vec<u8>> {
handle_rpc_with_codecs(rpc, settings, native, true, false)
}
/// Initial codec once the m-line is negotiated: H.265 when both sides support it (the Mac viewer
/// lists H265 first in its offer), unless UU_VIDEO_CODEC=h264.
/// lists H265 first in its offer) and a hardware encoder is selected. Software libx265 is about ten
/// times slower than libx264 (measured 15 vs 155 fps at 1080p on a 4-core ARM host, #59), so CPU
/// hosts default to H.264. UU_VIDEO_CODEC=h264 / h265 overrides.
#[cfg(test)]
fn test_selection() -> crate::video_select::Selection {
crate::video_select::resolve_pair(Some("auto"), None, Some("auto"), None, false, None)
}
#[cfg(test)]
pub fn preferred_codec(h264: bool, h265: bool) -> VideoCodec {
let forced_h264 = std::env::var("UU_VIDEO_CODEC").is_ok_and(|v| v.eq_ignore_ascii_case("h264"));
if h265 && !(forced_h264 && h264) { VideoCodec::H265 } else { VideoCodec::H264 }
preferred_codec_for(h264, h265, test_selection())
}
pub fn preferred_codec_for(h264: bool, h265: bool, selection: crate::video_select::Selection) -> VideoCodec {
pick_codec(h264, h265, crate::video_select::codec_force(selection.codec_pref), crate::video_select::hardware(selection.encoder))
}
pub(crate) fn pick_codec(h264: bool, h265: bool, forced: Option<&str>, hardware: bool) -> VideoCodec {
let wants_h265 = match forced { Some("h264") => false, Some("h265" | "hevc") => true, _ => hardware };
if h265 && (wants_h265 || !h264) { VideoCodec::H265 } else { VideoCodec::H264 }
}
#[cfg(test)]
pub fn handle_rpc_with_codecs(rpc: &[WireField], settings: &watch::Sender<VideoSettings>, native: (u32, u32), h264: bool, h265: bool) -> Option<Vec<u8>> {
apply_rpc(rpc, settings, native, h264, h265, crate::video::full_chroma_available())
handle_rpc_for(rpc, settings, native, h264, h265, test_selection())
}
fn apply_rpc(rpc: &[WireField], settings: &watch::Sender<VideoSettings>, native: (u32, u32), h264: bool, h265: bool, full_chroma: bool) -> Option<Vec<u8>> {
pub fn handle_rpc_for(rpc: &[WireField], settings: &watch::Sender<VideoSettings>, native: (u32, u32), h264: bool, h265: bool, selection: crate::video_select::Selection) -> Option<Vec<u8>> {
apply_rpc(rpc, settings, native, h264, h265, crate::video::full_chroma_for(selection.encoder), crate::video_select::codec_force(selection.codec_pref))
}
/// The resolution a capture/resolution RPC asks for, parsed like apply_rpc: X11 hosts apply it
/// to the display mode itself (desktop_mode), as the official Windows host changes its resolution.
pub fn requested_resolution(rpc: &[WireField]) -> Option<crate::desktop_mode::Request> {
use crate::desktop_mode::Request;
if let Some(request) = message(rpc, 2) {
let fields = decode_wire(request).ok()?;
if number(&fields, 10) == Some(3) { return Some(Request::Native); }
let (w, h) = number(&fields, 16).zip(number(&fields, 17)).or_else(|| number(&fields, 5).zip(number(&fields, 6)))?;
Some(Request::Size(u32::try_from(w).ok()?, u32::try_from(h).ok()?))
} else if let Some(request) = message(rpc, 6) {
let fields = decode_wire(request).ok()?;
Some(Request::Size(u32::try_from(number(&fields, 1)?).ok()?, u32::try_from(number(&fields, 2)?).ok()?))
} else { None }
}
fn apply_rpc(rpc: &[WireField], settings: &watch::Sender<VideoSettings>, native: (u32, u32), _h264: bool, h265: bool, full_chroma: bool, forced: Option<&str>) -> Option<Vec<u8>> {
let header = message(rpc, 1).unwrap_or(&[]);
let mut next = *settings.borrow();
if let Some(request) = message(rpc, 2) {
@@ -136,11 +183,13 @@ fn apply_rpc(rpc: &[WireField], settings: &watch::Sender<VideoSettings>, native:
// codec_type 13 (1 H264, 2 H265): like the official host (negotiateCodec), the host picks the
// codec from both capability lists; the Mac viewer sends its current codec (1 while receiving
// H.264), so only an explicit H.265 request switches, never one absent from the m-line.
if number(&fields, 13) == Some(2) && h265 { next.codec = VideoCodec::H265; }
// A forced codec (host_settings video_codec or UU_VIDEO_CODEC) wins over that switch, same
// rule as pick_codec at stream start: h264 stays H.264; auto/h265 still follow the request.
if number(&fields, 13) == Some(2) && h265 && forced != Some("h264") { next.codec = VideoCodec::H265; }
// Field 1 is the viewer's fps option index (1 = 30, 2 = 60, ...); 18 fpsCount is the frame rate.
if let Some(fps) = number(&fields, 18).filter(|v| *v > 0).or_else(|| number(&fields, 1).and_then(fps_from_option)) { next.fps = fps as u32; }
if let Some(quality) = number(&fields, 2).filter(|v| *v > 0) { next.quality = quality; }
if let Some(bitrate) = number(&fields, 8).filter(|v| *v > 0) { next.custom_mbps = bitrate as u32; }
if let Some(bitrate) = number(&fields, 8).filter(|v| *v > 0) { next.custom_bps = custom_bitrate_bps(bitrate); }
// Field 7 chorma_format (sic): 3 = 4:4:4 when 真彩 is on, 1 = 4:2:0. The Sync reports what is encoded.
match number(&fields, 7) {
Some(CHROMA_444) if full_chroma => next.chroma = CHROMA_444,
@@ -180,9 +229,37 @@ fn apply_rpc(rpc: &[WireField], settings: &watch::Sender<VideoSettings>, native:
Some(out)
}
/// CaptureSettingResponse.errors (Error fields 1 code / 2 message, rpc_main.proto).
pub fn rejected_request(data:&[u8],reason:&str)->Option<Vec<u8>> {
let outer=decode_wire(data).ok()?;
let rpc=decode_wire(message(&outer,21)?).ok()?;
message(&rpc,2)?;
let mut error=Vec::new();
put_varint(1,(-1i64) as u64,&mut error);
put_bytes(2,reason.as_bytes(),&mut error);
let mut errors=Vec::new();put_bytes(1,&error,&mut errors);
let mut response=Vec::new();
put_bytes(1,message(&rpc,1).unwrap_or(&[]),&mut response);
put_bytes(2,&errors,&mut response);
Some(response)
}
/// Message 7 ScreenSources in pixels for capture-setting v4: native, choices, current size.
pub fn screen_sources(seq: u64, timestamp: u64, native: (u32, u32), output: Option<(u32, u32)>, name: &str) -> Result<Vec<u8>, String> {
use crate::initialization::{Screen, WinRect};
let outputs=crate::wayland::outputs();
if !outputs.is_empty() {
let current=crate::wayland::selected();
let choices:Vec<Vec<(i32,i32)>>=outputs.iter().map(|m|scaled_sizes((m.width,m.height)).into_iter().map(|(w,h)|(w as i32,h as i32)).collect()).collect();
let screens:Vec<Screen<'_>>=outputs.iter().enumerate().map(|(id,m)| Screen {
id:id as i32, fps:m.fps,
resolution:WinRect {left:0,top:0,width:m.width as i32,height:m.height as i32,pixel_width:m.width as i32,pixel_height:m.height as i32},
primary:id==0,dpr:1.0,display_name:&m.name,video_track_index:if id==current {0} else {-1},
screen_type:0,builtin_screen_type:if m.name.starts_with("eDP") {1} else {2},scaled:&choices[id],
current:if id==current {output.map(|(w,h)|(w as i32,h as i32))} else {None},
}).collect();
return crate::initialization::encode_screen_sources(seq,timestamp,&screens,current as i32);
}
let (w, h) = (native.0 as i32, native.1 as i32);
let scaled: Vec<(i32, i32)> = scaled_sizes(native).into_iter().map(|(w, h)| (w as i32, h as i32)).collect();
// DPI_SCALE starts at version 5; the observed v4 request uses fields 5/6 as pixels.
@@ -201,7 +278,7 @@ pub fn sync_payload(settings: &VideoSettings, native: (u32, u32)) -> Vec<u8> {
put_varint(1, u64::from(settings.fps), &mut out);
put_varint(2, settings.quality, &mut out);
put_varint(3, settings.chroma, &mut out);
if settings.custom_mbps > 0 { put_varint(4, u64::from(settings.custom_mbps), &mut out); }
if settings.custom_bps > 0 { put_varint(4, u64::from(settings.custom_bps), &mut out); }
put_varint(5, u64::from(size.0), &mut out);
put_varint(6, u64::from(size.1), &mut out);
put_varint(9, u64::from(size.0), &mut out);
@@ -248,7 +325,7 @@ mod tests {
put_varint(18, 30, &mut body);
let request = rpc(77, 2, &body);
let response = handle_rpc(&decode_wire(&request).unwrap(), &tx, (1920, 1080)).unwrap();
assert_eq!(*rx.borrow(), VideoSettings { codec: VideoCodec::H264, fps: 30, quality: QUALITY_GENERAL, custom_mbps: 0, output: None, chroma: CHROMA_420 });
assert_eq!(*rx.borrow(), VideoSettings { source_id:0,source_generation:0, codec: VideoCodec::H264, fps: 30, quality: QUALITY_GENERAL, custom_bps: 0, output: None, chroma: CHROMA_420 });
assert_eq!(rx.borrow().max_kbps(), Some(2_000));
let fields = decode_wire(&response).unwrap();
assert_eq!(message(&fields, 1), Some(&[8u8, 77][..]));
@@ -274,12 +351,12 @@ mod tests {
let (tx, rx) = watch::channel(VideoSettings::default());
// Observed Mac viewer request with 真彩 on: field 7 = 3.
let request = rpc(5, 2, &[8, 2, 16, 4, 56, 3, 144, 1, 60]);
apply_rpc(&decode_wire(&request).unwrap(), &tx, (1920, 1080), true, false, false).unwrap();
apply_rpc(&decode_wire(&request).unwrap(), &tx, (1920, 1080), true, false, false, None).unwrap();
assert_eq!(rx.borrow().chroma, CHROMA_420);
apply_rpc(&decode_wire(&request).unwrap(), &tx, (1920, 1080), true, false, true).unwrap();
apply_rpc(&decode_wire(&request).unwrap(), &tx, (1920, 1080), true, false, true, None).unwrap();
assert_eq!(rx.borrow().chroma, CHROMA_444);
assert_eq!(number(&decode_wire(&sync_payload(&rx.borrow(), (1920, 1080))).unwrap(), 3), Some(CHROMA_444));
apply_rpc(&decode_wire(&rpc(6, 2, &[56, 1])).unwrap(), &tx, (1920, 1080), true, false, true).unwrap();
apply_rpc(&decode_wire(&rpc(6, 2, &[56, 1])).unwrap(), &tx, (1920, 1080), true, false, true, None).unwrap();
assert_eq!(rx.borrow().chroma, CHROMA_420);
}
@@ -432,8 +509,40 @@ mod tests {
#[test]
fn auto_quality_keeps_constant_quality_encoding() {
assert_eq!(VideoSettings::default().max_kbps(), None);
assert_eq!(VideoSettings { quality: QUALITY_CUSTOM, custom_mbps: 0, ..Default::default() }.max_kbps(), None);
assert_eq!(VideoSettings { quality: QUALITY_CUSTOM, custom_mbps: 12, ..Default::default() }.max_kbps(), Some(12_000));
assert_eq!(VideoSettings { quality: QUALITY_CUSTOM, custom_bps: 0, ..Default::default() }.max_kbps(), None);
assert_eq!(VideoSettings { quality: QUALITY_CUSTOM, custom_bps: 12_000_000, ..Default::default() }.max_kbps(), Some(12_000));
}
#[test]
fn mobile_custom_bitrate_is_bits_per_second_in_request_and_sync() {
// Mobile viewer sends field 8 = 1_000_000 for 1 Mbps (observed live, 2026-10-20).
for (bps, kbps) in [(1_000_000, 1_000), (30_000_000, 30_000), (500_000, 500), (100_000_000, 100_000), (200_000_000, 100_000)] {
let (tx, rx) = watch::channel(VideoSettings::default());
let mut body = Vec::new();
put_varint(2, QUALITY_CUSTOM, &mut body);
put_varint(8, bps, &mut body);
handle_rpc(&decode_wire(&rpc(7, 2, &body)).unwrap(), &tx, (1920, 1080)).unwrap();
assert_eq!(rx.borrow().max_kbps(), Some(kbps));
let sync = sync_payload(&rx.borrow(), (1920, 1080));
assert_eq!(number(&decode_wire(&sync).unwrap(), 4), Some(bps));
}
}
#[test]
fn small_custom_bitrates_are_read_as_larger_units() {
assert_eq!(custom_bitrate_bps(20), 20_000_000);
assert_eq!(custom_bitrate_bps(8_000), 8_000_000);
assert_eq!(custom_bitrate_bps(1_000_000), 1_000_000);
}
#[test]
fn oversized_custom_bitrate_does_not_wrap_before_encoder_limit() {
let (tx, rx) = watch::channel(VideoSettings::default());
let mut body = Vec::new();
put_varint(2, QUALITY_CUSTOM, &mut body);
put_varint(8, u64::from(u32::MAX) + 1, &mut body);
handle_rpc(&decode_wire(&rpc(8, 2, &body)).unwrap(), &tx, (1920, 1080)).unwrap();
assert_eq!(rx.borrow().max_kbps(), Some(100_000));
}
#[test]
@@ -469,4 +578,66 @@ mod codec_tests {
assert_eq!(rx.borrow().codec, VideoCodec::H265);
assert_eq!(preferred_codec(true, false), VideoCodec::H264);
}
#[test]
fn software_hosts_default_to_h264_unless_forced() {
assert_eq!(pick_codec(true, true, None, true), VideoCodec::H265);
assert_eq!(pick_codec(true, true, None, false), VideoCodec::H264);
assert_eq!(pick_codec(true, true, Some("h265"), false), VideoCodec::H265);
assert_eq!(pick_codec(true, true, Some("h264"), true), VideoCodec::H264);
// Only one codec bound in the SDP: use it whatever the preference.
assert_eq!(pick_codec(false, true, None, false), VideoCodec::H265);
assert_eq!(pick_codec(true, false, Some("h265"), true), VideoCodec::H264);
}
#[test]
fn forced_h264_ignores_later_h265_capture_request() {
let (tx, rx) = watch::channel(VideoSettings::default());
// Field 13 = 2 on a peer that negotiated both codecs.
let request = decode_wire(&[18, 2, 104, 2]).unwrap();
apply_rpc(&request, &tx, (1920, 1080), true, true, false, Some("h264")).unwrap();
assert_eq!(rx.borrow().codec, VideoCodec::H264);
apply_rpc(&request, &tx, (1920, 1080), true, true, false, None).unwrap();
assert_eq!(rx.borrow().codec, VideoCodec::H265);
let (tx, rx) = watch::channel(VideoSettings::default());
apply_rpc(&request, &tx, (1920, 1080), true, true, false, Some("h265")).unwrap();
assert_eq!(rx.borrow().codec, VideoCodec::H265);
}
#[test]
fn true_color_keeps_codec_and_vaapi_reports_420() {
// Field 7 = 3 (真彩). full_chroma false is the VAAPI 4:2:0 drop; true encodes 4:4:4.
let request = decode_wire(&[18, 2, 56, 3]).unwrap();
let (tx, rx) = watch::channel(VideoSettings { codec: VideoCodec::H265, ..Default::default() });
apply_rpc(&request, &tx, (1920, 1080), true, true, true, None).unwrap();
assert_eq!((rx.borrow().chroma, rx.borrow().codec), (CHROMA_444, VideoCodec::H265));
// NVENC session (full chroma) that already chose H.265 stays H.265 when 真彩 is requested.
let nvenc = crate::video_select::resolve_pair(None, None, None, None, true, None);
assert_eq!(nvenc.encoder, crate::video::Encoder::Nvenc);
let (tx, rx) = watch::channel(VideoSettings { codec: preferred_codec_for(true, true, nvenc), ..VideoSettings::default() });
assert_eq!(rx.borrow().codec, VideoCodec::H265);
handle_rpc_for(&request, &tx, (1920, 1080), true, true, nvenc).unwrap();
assert_eq!((rx.borrow().chroma, rx.borrow().codec), (CHROMA_444, VideoCodec::H265));
let (tx, rx) = watch::channel(VideoSettings { codec: VideoCodec::H265, ..Default::default() });
apply_rpc(&request, &tx, (1920, 1080), true, true, false, None).unwrap();
assert_eq!((rx.borrow().chroma, rx.borrow().codec), (CHROMA_420, VideoCodec::H265));
assert_eq!(number(&decode_wire(&sync_payload(&rx.borrow(), (1920, 1080))).unwrap(), 3), Some(CHROMA_420));
assert!(decode_wire(&sync_payload(&rx.borrow(), (1920, 1080))).unwrap().iter().all(|f| f.number != 13));
}
}
#[cfg(test)]
mod screen_error_tests {
use super::*;
#[test]
fn failed_switch_returns_correlated_error_not_success() {
let header=[10,4,b't',b'e',b's',b't'];
let mut rpc=Vec::new();put_bytes(1,&header,&mut rpc);put_bytes(2,&[32,99],&mut rpc);
let request=crate::initialization::envelope(1,2,21,&rpc);
let response=rejected_request(&request,"Unknown screen").unwrap();
let fields=decode_wire(&response).unwrap();
assert_eq!(message(&fields,1),Some(header.as_slice()));
let result=decode_wire(message(&fields,2).unwrap()).unwrap();
let error=decode_wire(message(&result,1).unwrap()).unwrap();
assert_eq!(number(&error,1),Some(u64::MAX));
assert_eq!(message(&error,2),Some(b"Unknown screen".as_slice()));
assert!(rejected_request(b"invalid","failure").is_none());
}
}
+10 -2
View File
@@ -17,6 +17,9 @@ impl TextFormat {
}
fn id(self)->u64{match self{Self::Windows=>UNICODE_TEXT,Self::Mac=>0}}
fn name(self)->&'static str{match self{Self::Windows=>"CF_UNICODETEXT",Self::Mac=>MAC_TEXT}}
/// Name in a format-list offer. Official Windows peers name predefined formats `predefined_<id>`; a plain
/// `CF_UNICODETEXT` makes the Windows viewer register a custom format instead of id 13 (issue #151).
fn offer_name(self)->&'static str{match self{Self::Windows=>WINDOWS_OFFER_NAME,Self::Mac=>MAC_TEXT}}
fn encode(self,text:&str)->Vec<u8>{match self{Self::Windows=>encode_windows(text),Self::Mac=>text.as_bytes().to_vec()}}
fn decode(self,data:&[u8])->Result<String,&'static str>{
match self{
@@ -31,6 +34,7 @@ impl TextFormat {
}
}
}
const WINDOWS_OFFER_NAME:&str="predefined_13";
const BLOCK_BYTES:usize=0x20000;
const MAX_BYTES:usize=MAX_TEXT*2+2;
pub struct ResultMessages {pub messages:Vec<(u32,Vec<u8>)>,pub text:Option<String>}
@@ -96,7 +100,7 @@ impl State{
if text.contains('\0')||encode_windows(&text).len()>MAX_BYTES{return Err("clipboard encoded text exceeds limit");}
self.local=Some(text);
let mut list=Vec::new();
for kind in formats {let mut format=Vec::new();int(1,kind.id(),&mut format);string(2,kind.name(),&mut format);nested(1,&format,&mut list);}
for kind in formats {let mut format=Vec::new();int(1,kind.id(),&mut format);string(2,kind.offer_name(),&mut format);nested(1,&format,&mut list);}
Ok(request(id,1,&list))
}
pub fn request(&mut self,rpc:&[u8],next:&mut impl FnMut()->u64)->Result<ResultMessages,&'static str>{
@@ -210,7 +214,11 @@ mod tests{
let data=bytes(bytes(bytes(&out.messages[1].1,9).unwrap().unwrap(),3).unwrap().unwrap(),3).unwrap().unwrap();
assert_eq!(data,b"hi");
// Host-side offers are unchanged: CF_UNICODETEXT only.
assert_eq!(format_ids(&State::default().offer(1,"hi".into()).unwrap()),vec![13]);
let host_offer=State::default().offer(1,"hi".into()).unwrap();
assert_eq!(format_ids(&host_offer),vec![13]);
let list=bytes(bytes(&host_offer,9).unwrap().unwrap(),1).unwrap().unwrap();
let format=bytes(list,1).unwrap().unwrap();
assert_eq!(text_field(format,2),Ok(WINDOWS_OFFER_NAME));
}
#[test]
fn desktop_clipboard_negotiates_and_buffers_unicode_until_confirmation(){
+7
View File
@@ -5,6 +5,13 @@
use std::path::PathBuf;
use std::sync::OnceLock;
/// Tests that point UU_CONFIG at a temp file must take this, or they race.
#[cfg(test)]
pub(crate) fn test_env_lock() -> &'static std::sync::Mutex<()> {
static LOCK: std::sync::Mutex<()> = std::sync::Mutex::new(());
&LOCK
}
pub fn path() -> PathBuf {
if let Some(p) = std::env::var_os("UU_CONFIG") { return PathBuf::from(p); }
let base = std::env::var_os("XDG_CONFIG_HOME").map(PathBuf::from)
+4
View File
@@ -182,6 +182,10 @@ pub fn encode_echo_response_with_clipboard(seq: u64, timestamp: u64, request_seq
// 6 ff_file_transfer_ftp = LIST_COMPRESS (zlib dir_data), 8 ff_clipboard = SUPPORT_TEXT_CHANGE.
let mut flags = vec![8, crate::capture_setting::FEATURE_VERSION as u8,
16, crate::system_actions::FF_SIMPLE_ACTION, 24, crate::system_actions::FF_SYSTEM_METRICS, 48, 2];
// Privacy screen (Mac UURemote name maps): 3 ff_system_metrics = FF_SYSTEM_METRICS_SETTING_PRIVATE_SCREEN
// (3, after AUTO_LOCK 2; the viewer then reads SettingMetric 4/7), 4 ff_private_screen =
// FF_PRIVATE_SCREEN_ENHANCED_PRIVACY (2): screen off besides the picture mode.
if crate::privacy_screen::supported() { flags[5] = 3; flags.extend([32, 2]); }
if clipboard { flags.extend_from_slice(&[64, 3]); }
action.push(34);
action.push(flags.len() as u8);
+10
View File
@@ -70,6 +70,16 @@ impl DamageCapture {
pub fn size(&self) -> (u32, u32) { (self.width as u32, self.height as u32) }
pub fn shm_raw_ptr(&self) -> *mut u8 { self.shm_ptr }
pub fn shm_size(&self) -> usize { self.len }
pub fn refresh(&mut self) -> Result<(), String> {
self.conn.shm_get_image(self.root, 0, 0, self.width, self.height, !0, Z_PIXMAP, self.seg, 0)
.map_err(text)?.reply().map_err(text)?;
Ok(())
}
/// Waits up to `timeout` for the screen to change. Returns `true` on change, `false` on timeout.
pub fn wait(&mut self, timeout: Duration) -> Result<bool, String> {
let deadline = Instant::now() + timeout;
+10
View File
@@ -6,6 +6,16 @@ pub enum DesktopBackend { X11, Wayland, Portal, Kms }
/// port mapping stay available (servers without a monitor or logged-in session).
pub fn headless() -> bool { std::env::var("UU_DESKTOP_BACKEND").is_ok_and(|v| v == "none") }
/// A Wayland compositor socket exists for this user or the environment says so, even when this
/// process (e.g. a systemd unit with only DISPLAY set) would select X11.
pub fn wayland_session_running() -> bool {
std::env::var("XDG_SESSION_TYPE").is_ok_and(|v| v == "wayland")
|| std::env::var("WAYLAND_DISPLAY").is_ok_and(|v| !v.is_empty())
|| std::env::var_os("XDG_RUNTIME_DIR").and_then(|dir| std::fs::read_dir(dir).ok())
.is_some_and(|entries| entries.flatten().any(|e| e.file_name().to_str()
.is_some_and(|n| n.starts_with("wayland-") && !n.ends_with(".lock"))))
}
pub fn detect() -> Result<DesktopBackend, String> {
let backend=select(std::env::var("UU_DESKTOP_BACKEND").ok().as_deref(),
std::env::var("XDG_SESSION_TYPE").ok().as_deref(),
+154
View File
@@ -79,6 +79,107 @@ fn mapping(kind: u8, payload: &[u8]) -> Vec<u8> {
crate::initialization::envelope(1, 0, 27, &frame)
}
#[tokio::test]
async fn privacy_replies_wait_for_each_peers_text_channel() {
tokio::time::timeout(Duration::from_secs(25), async {
let mut peers = Vec::new();
for request_id in [41, 51] {
let (host, mut viewer) = connect(Arc::new(InputInjector::without_desktop()), false, None,
&["CONTROL_DATA_CHANNEL"]).await;
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 13).await;
for (id, case, payload) in [(request_id, 25, &[][..]), (request_id + 1, 7, &[8, 1, 16, 3][..])] {
let mut rpc = bytes(1, &[8, id]);
rpc.extend(bytes(case, payload));
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(1, 0, 21, &rpc)).await;
}
// A synthetic host rejects privacy without touching a physical desktop.
// Echo is a dispatch barrier: both replies are queued before TEXT exists.
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(2, 0, 3, &[8, 0])).await;
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 3).await;
peers.push((request_id, host, viewer));
}
for (request_id, host, mut viewer) in peers {
let text = viewer.pc.create_data_channel("TEXT_DATA_CHANNEL", None).await.unwrap();
let (tx, messages) = mpsc::unbounded_channel();
text.on_message(Box::new(move |message| {
let _ = tx.send(("TEXT_DATA_CHANNEL".into(), message.data.to_vec()));
Box::pin(async {})
}));
viewer.messages = messages;
let mut replies = Vec::new();
let mut metrics_seen = false;
while replies.len() < 2 || !metrics_seen {
let (channel, message) = tokio::time::timeout(Duration::from_secs(5), viewer.messages.recv()).await
.expect("late TEXT delivery timed out").expect("peer stopped responding");
assert_eq!(channel, "TEXT_DATA_CHANNEL");
if let Some(metrics) = body(&message, 13) {
assert_eq!(body(metrics, 1), Some([1, 2].as_slice()));
metrics_seen = true;
}
if body(&message, 22).is_some() { replies.push(message); }
}
for ((id, case), message) in [(request_id, 21), (request_id + 1, 3)].into_iter().zip(replies) {
let rpc = body(&message, 22).unwrap();
assert_eq!(body(rpc, 1), Some([8, id].as_slice()));
let response = body(rpc, case).expect("wrong RPC response case");
if case == 3 {
assert!(decode_wire(response).unwrap().iter().any(|f| f.number == 1 && f.value == WireValue::Varint(1)));
}
}
host.pc.close().await.unwrap();
viewer.pc.close().await.unwrap();
viewer.router.lock().await.stop().await.unwrap();
}
}).await.expect("privacy TEXT routing regression exceeded deadline");
}
#[tokio::test]
async fn ready_portal_control_input_is_forwarded_while_locked() {
tokio::time::timeout(Duration::from_secs(20), async {
let input = Arc::new(InputInjector::without_desktop());
let mut screen = ScreenCapture::unavailable("synthetic ready desktop".into());
screen.backend = crate::desktop_backend::DesktopBackend::Portal;
screen.init_error = None;
let (lock, locked) = tokio::sync::watch::channel(Some(true));
let portal = Arc::new(crate::desktop_session::PortalDesktop::with_lock_state(Arc::new(screen), locked));
let (host, mut viewer) = connect(input.clone(), true, Some(portal.clone()), &["CONTROL_DATA_CHANNEL"]).await;
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 13).await;
for (index, state) in [Some(true), None].into_iter().enumerate() {
lock.send(state).unwrap();
let before = input.portal_input_counts_for_test();
for message in [
br#"{"action":"kbd_press","key":65}"#.as_slice(),
br#"{"action":"kbd_release","key":65}"#.as_slice(),
br#"{"action":"mouse_press","button":1}"#.as_slice(),
br#"{"action":"mouse_release","button":1}"#.as_slice(),
] {
send(&viewer, "CONTROL_DATA_CHANNEL", message.to_vec()).await;
}
let sequence = 310 + index as u64;
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(sequence, 0, 3, &[8, 0])).await;
loop {
let response = receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 3).await;
let args: serde_json::Value = serde_json::from_slice(body(body(&response, 3).unwrap(), 2).unwrap()).unwrap();
if args["seq"] == sequence { break; }
}
let after = input.portal_input_counts_for_test();
assert_eq!(after[2] - before[2], 2, "keyboard dropped for lock state {state:?}");
assert_eq!(after[1] - before[1], 2, "mouse buttons dropped for lock state {state:?}");
}
let before = input.portal_input_counts_for_test();
let mut unavailable = ScreenCapture::unavailable("synthetic closed source".into());
unavailable.backend = crate::desktop_backend::DesktopBackend::Portal;
portal.publish_test_screen(Arc::new(unavailable));
send(&viewer, "CONTROL_DATA_CHANNEL", br#"{"action":"kbd_click","key":65}"#.to_vec()).await;
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(320, 0, 3, &[8, 0])).await;
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 3).await;
assert_eq!(input.portal_input_counts_for_test(), before, "unavailable source accepted input");
host.pc.close().await.unwrap();
viewer.pc.close().await.unwrap();
viewer.router.lock().await.stop().await.unwrap();
}).await.expect("locked CONTROL input regression exceeded deadline");
}
#[tokio::test]
async fn closing_unnegotiated_peers_releases_callback_state() {
for desktop in [false, true] {
@@ -215,3 +316,56 @@ async fn locked_control_unlock_requests_and_tools_work_without_a_video_frame() {
drop(lock);
}).await.expect("locked bootstrap/tool regression exceeded deadline");
}
#[tokio::test]
async fn capture_desktop_on_a_port_mapping_peer_promotes_it_once() {
tokio::time::timeout(Duration::from_secs(25), async {
let input = Arc::new(InputInjector::without_desktop());
let (host, mut viewer) = connect(input.clone(), false, None, &["CONTROL_DATA_CHANNEL", "FILE_DATA_CHANNEL"]).await;
let (requests, mut requested) = mpsc::unbounded_channel();
host.on_desktop_request(move || { let _ = requests.send(()); });
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 13).await;
assert!(!host.role.is_desktop() && host.role.input().is_none());
// The Mac viewer opens the desktop on its existing port-mapping peer (#99).
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(5, 0, 3, &[8, 4])).await;
tokio::time::timeout(Duration::from_secs(5), requested.recv()).await.unwrap().unwrap();
host.promote(None);
assert!(host.role.is_desktop());
assert!(host.role.input().is_some_and(|session| session.is_current()));
// CONTROL repeats the desktop initialization for the same viewer.
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 13).await;
// The port-mapping session on this peer still answers.
send(&viewer, "FILE_DATA_CHANNEL", mapping(2, b"still mapped")).await;
receive(&mut viewer.messages, "FILE_DATA_CHANNEL", 27).await;
// A repeated capture_desktop does not ask again, and a later promote is a no-op.
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(6, 0, 3, &[8, 4])).await;
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(7, 0, 3, &[8, 0])).await;
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 3).await;
assert!(requested.try_recv().is_err());
let lease = host.role.input().unwrap();
host.promote(None);
assert!(lease.is_current());
// Its video ended on its own (capture failed while locked, #114): capture_desktop restarts it
// on the same input lease.
let ended = tokio::spawn(async {});
*host.role.stream_task.lock().unwrap() = Some(ended.abort_handle());
ended.await.unwrap();
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(9, 0, 3, &[8, 4])).await;
tokio::time::timeout(Duration::from_secs(5), requested.recv()).await.unwrap().unwrap();
host.promote(None);
assert!(host.role.is_desktop() && !host.role.stream_ended() && lease.is_current());
// A newer desktop demotes it; the port mapping stays, and capture_desktop promotes it again.
host.demote();
assert!(!host.role.is_desktop() && host.role.input().is_none());
send(&viewer, "FILE_DATA_CHANNEL", mapping(2, b"after demotion")).await;
receive(&mut viewer.messages, "FILE_DATA_CHANNEL", 27).await;
send(&viewer, "CONTROL_DATA_CHANNEL", crate::initialization::envelope(8, 0, 3, &[8, 4])).await;
tokio::time::timeout(Duration::from_secs(5), requested.recv()).await.unwrap().unwrap();
host.promote(None);
assert!(host.role.is_desktop() && host.role.input().is_some_and(|session| session.is_current()));
receive(&mut viewer.messages, "CONTROL_DATA_CHANNEL", 13).await;
host.pc.close().await.unwrap();
viewer.pc.close().await.unwrap();
viewer.router.lock().await.stop().await.unwrap();
}).await.expect("capture_desktop promotion exceeded deadline");
}
+222
View File
@@ -0,0 +1,222 @@
//! X11 desktop resolution follows the viewer's 分辨率 choice, like the official Windows host:
//! the display mode itself changes (xrandr), not just the encoded size. The mode in use before
//! the first change is restored for 原始/follow-remote and when the last desktop stream ends.
//! Disable with UU_DESKTOP_RESIZE=0 (the viewer choice then scales the encoded stream instead).
use std::process::Command;
use std::sync::Mutex;
use std::sync::atomic::{AtomicUsize, Ordering};
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum Request { Native, Size(u32, u32) }
struct Original { display: String, output: String, mode: String }
static ORIGINAL: Mutex<Option<Original>> = Mutex::new(None);
static STREAMS: AtomicUsize = AtomicUsize::new(0);
/// Upper bound per side (H.264 NVENC/VAAPI limit) and lower bound for a usable desktop.
const MAX_SIDE: u32 = 4096;
const MIN_SIZE: (u32, u32) = (640, 480);
pub fn enabled() -> bool { std::env::var("UU_DESKTOP_RESIZE").map_or(true, |v| v != "0") }
/// Keeps the changed mode while any desktop stream runs; the last one restores it.
pub struct StreamGuard;
impl StreamGuard {
pub fn new() -> Self { STREAMS.fetch_add(1, Ordering::SeqCst); Self }
}
impl Drop for StreamGuard {
fn drop(&mut self) {
if STREAMS.fetch_sub(1, Ordering::SeqCst) == 1 && ORIGINAL.lock().unwrap().is_some() {
// xrandr blocks; never run it on the async runtime thread dropping the stream.
std::thread::spawn(|| {
std::thread::sleep(std::time::Duration::from_secs(2));
if STREAMS.load(Ordering::SeqCst) == 0 { restore(); }
});
}
}
}
/// Applies the viewer's resolution request to the X11 display; returns the desktop size now in
/// use, or None when nothing changed hands (the caller keeps encoder scaling as the fallback).
pub fn apply(display: &str, request: Request) -> Option<(u32, u32)> {
match request {
Request::Native => { restore(); crate::capture::x11_size() },
Request::Size(w, h) => {
let target = fit(w, h)?;
match switch(display, target) {
Ok(()) => crate::capture::x11_size(),
Err(error) => { log::warn!("Desktop resolution change to {}x{} failed: {}", target.0, target.1, error); None },
}
},
}
}
/// Even sides within MIN_SIZE..=MAX_SIDE, keeping the aspect ratio when scaled down.
fn fit(w: u32, h: u32) -> Option<(u32, u32)> {
if w == 0 || h == 0 { return None; }
let scale = (f64::from(MAX_SIDE) / f64::from(w.max(h))).min(1.0);
let (w, h) = ((f64::from(w) * scale).round() as u32, (f64::from(h) * scale).round() as u32);
Some((w.max(MIN_SIZE.0) & !1, h.max(MIN_SIZE.1) & !1))
}
fn switch(display: &str, target: (u32, u32)) -> Result<(), String> {
let state = query(display)?;
if state.current == Some(target) { return Ok(()); }
{
let mut original = ORIGINAL.lock().unwrap();
if original.is_none() {
let mode = state.current_mode.clone().ok_or("current mode unknown")?;
log::info!("Desktop resolution: saving original mode {} on {}", mode, state.output);
*original = Some(Original { display: display.into(), output: state.output.clone(), mode });
}
}
let mode = match state.modes.iter().find(|(_, size)| *size == target) {
Some((name, _)) => name.clone(),
None => {
let (name, timings) = cvt_reduced(target.0, target.1);
// An existing mode of this name (earlier session) makes --newmode fail harmlessly.
let mut args = vec!["--newmode", name.as_str()];
args.extend(timings.iter().map(String::as_str));
let _ = xrandr(display, &args);
xrandr(display, &["--addmode", &state.output, &name])?;
name
},
};
set_mode(display, &state.output, &mode, target)?;
log::info!("Desktop resolution changed to {}x{} ({})", target.0, target.1, mode);
Ok(())
}
/// Restores the mode saved before the first change, if any.
pub fn restore() {
let Some(original) = ORIGINAL.lock().unwrap().take() else { return; };
let size = query(&original.display).ok().and_then(|state| state.modes.into_iter().find(|(name, _)| *name == original.mode).map(|(_, size)| size));
match size.ok_or_else(|| "original mode no longer listed".to_owned())
.and_then(|size| set_mode(&original.display, &original.output, &original.mode, size)) {
Ok(()) => log::info!("Desktop resolution restored to {}", original.mode),
Err(error) => log::warn!("Desktop resolution restore failed: {}", error),
}
let _ = crate::capture::x11_size();
}
/// GNOME/mutter may answer a mode list change by re-applying its preferred mode; set it again.
fn set_mode(display: &str, output: &str, mode: &str, size: (u32, u32)) -> Result<(), String> {
for _ in 0..3 {
xrandr(display, &["--output", output, "--mode", mode])?;
std::thread::sleep(std::time::Duration::from_millis(1500));
if query(display)?.current == Some(size) { return Ok(()); }
}
Err(format!("{output} did not keep {mode}"))
}
fn xrandr(display: &str, args: &[&str]) -> Result<String, String> {
let output = Command::new("xrandr").arg("--display").arg(display).args(args).output()
.map_err(|e| format!("xrandr unavailable: {}", e.kind()))?;
if !output.status.success() { return Err(format!("xrandr {} exited with {}", args.first().unwrap_or(&""), output.status)); }
Ok(String::from_utf8_lossy(&output.stdout).into_owned())
}
struct State { output: String, current: Option<(u32, u32)>, current_mode: Option<String>, modes: Vec<(String, (u32, u32))> }
fn query(display: &str) -> Result<State, String> { parse(&xrandr(display, &["--query"])?).ok_or_else(|| "no connected output".into()) }
/// The primary connected output (else the first connected one with a mode) and its mode list.
fn parse(text: &str) -> Option<State> {
let mut outputs: Vec<(bool, State)> = Vec::new();
for line in text.lines() {
if let Some(rest) = line.strip_prefix(" ") {
let Some((_, state)) = outputs.last_mut() else { continue; };
let mut parts = rest.split_whitespace();
let Some(name) = parts.next() else { continue; };
let Some(size) = mode_size(name) else { continue; };
if parts.any(|rate| rate.contains('*')) { state.current = Some(size); state.current_mode = Some(name.into()); }
state.modes.push((name.into(), size));
} else if !line.starts_with(' ') {
let mut parts = line.split_whitespace();
let (Some(name), Some("connected")) = (parts.next(), parts.next()) else { outputs.push((false, State { output: String::new(), current: None, current_mode: None, modes: Vec::new() })); continue; };
let primary = line.contains(" connected primary ");
outputs.push((primary, State { output: name.into(), current: None, current_mode: None, modes: Vec::new() }));
}
}
let mut connected: Vec<(bool, State)> = outputs.into_iter().filter(|(_, s)| !s.output.is_empty() && s.current.is_some()).collect();
let index = connected.iter().position(|(primary, _)| *primary).unwrap_or(0);
(index < connected.len()).then(|| connected.swap_remove(index).1)
}
/// "1920x1080", "1920x1080R", "1920x1080_60.00", "1920x1080i" → (1920, 1080).
fn mode_size(name: &str) -> Option<(u32, u32)> {
let (w, rest) = name.split_once('x')?;
let h: String = rest.chars().take_while(char::is_ascii_digit).collect();
Some((w.parse().ok()?, h.parse().ok()?))
}
/// VESA CVT reduced-blanking (v1) timings: 60 Hz, or 30 Hz when 60 Hz exceeds an HDMI 2.0
/// pixel clock (virtual/forced connectors on integrated GPUs reject faster modes).
fn cvt_reduced(w: u32, h: u32) -> (String, Vec<String>) {
const H_BLANK: u32 = 160; const H_SYNC: u32 = 32; const H_FRONT: u32 = 48;
const V_FRONT: u32 = 3; const MIN_V_BACK: u32 = 6; const MIN_VBLANK_US: f64 = 460.0;
let v_sync = match (w * 3 == h * 4, w * 9 == h * 16, w * 10 == h * 16, w * 4 == h * 5, w * 9 == h * 15) {
(true, ..) => 4, (_, true, ..) => 5, (_, _, true, ..) => 6, (_, _, _, true, _) | (.., true) => 7, _ => 10,
};
let timing = |refresh: f64| {
let h_period = (1_000_000.0 / refresh - MIN_VBLANK_US) / f64::from(h);
let vbi = ((MIN_VBLANK_US / h_period) as u32 + 1).max(V_FRONT + v_sync + MIN_V_BACK);
let (total_h, total_v) = (w + H_BLANK, h + vbi);
let clock = (refresh * f64::from(total_h) * f64::from(total_v) / 1_000_000.0 / 0.25).floor() * 0.25;
(clock, total_h, total_v)
};
let (mut refresh, mut t) = (60, timing(60.0));
if t.0 > 590.0 { refresh = 30; t = timing(30.0); }
let (clock, total_h, total_v) = t;
let name = format!("{w}x{h}_{refresh}R");
let timings = [format!("{clock:.2}"), w.to_string(), (w + H_FRONT).to_string(), (w + H_FRONT + H_SYNC).to_string(), total_h.to_string(),
h.to_string(), (h + V_FRONT).to_string(), (h + V_FRONT + v_sync).to_string(), total_v.to_string(), "+hsync".into(), "-vsync".into()];
(name, timings.into())
}
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn reduced_blanking_matches_the_cvt_tool() {
// `cvt -r 1920 1080`: 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync
let (name, t) = cvt_reduced(1920, 1080);
assert_eq!(name, "1920x1080_60R");
assert_eq!(t.join(" "), "138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync");
// `cvt -r 2560 1600`: 268.50 2560 2608 2640 2720 1600 1603 1609 1646
assert_eq!(cvt_reduced(2560, 1600).1.join(" "), "268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync");
// 4K at 60 Hz needs 533 MHz (under the cap); a larger desktop drops to 30 Hz.
assert_eq!(cvt_reduced(3840, 2160).0, "3840x2160_60R");
assert_eq!(cvt_reduced(4096, 2560).0, "4096x2560_30R");
}
#[test]
fn requested_sizes_are_even_and_bounded() {
assert_eq!(fit(1280, 720), Some((1280, 720)));
assert_eq!(fit(4112, 2580), Some((4096, 2570)));
assert_eq!(fit(301, 201), Some((640, 480)));
assert_eq!(fit(0, 1080), None);
}
#[test]
fn parses_primary_output_modes_and_current_mode() {
let text = r"Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.00
3840x2160R 29.98
1920x1080R 59.93*+
HDMI-2 disconnected (normal left inverted right x axis y axis)
";
let state = parse(text).unwrap();
assert_eq!(state.output, "HDMI-1");
assert_eq!(state.current, Some((1920, 1080)));
assert_eq!(state.current_mode.as_deref(), Some("1920x1080R"));
assert_eq!(state.modes.len(), 3);
assert_eq!(state.modes[1], ("3840x2160R".to_owned(), (3840, 2160)));
assert!(parse("Screen 0: minimum 320 x 200\nDP-1 disconnected (normal)\n").is_none());
}
}
+17 -10
View File
@@ -4,10 +4,11 @@
mod native {
use std::{ffi::c_void, ptr::NonNull};
extern "C" {
crate::engine_ffi! { crate::engine_plugin::Engine::Portal;
fn uu_desktop_power_wake() -> i32;
fn uu_desktop_idle_inhibitor_acquire(error: *mut i32) -> *mut c_void;
fn uu_desktop_idle_inhibitor_release(inhibitor: *mut c_void);
fn uu_desktop_screensaver_inhibitor_acquire(error: *mut i32) -> *mut c_void;
}
pub struct Handle(NonNull<c_void>);
@@ -16,9 +17,9 @@ mod native {
unsafe impl Send for Handle {}
impl Handle {
pub fn acquire() -> Result<Self, String> {
pub fn acquire(gnome: bool) -> Result<Self, String> {
let mut error = 0;
let pointer = unsafe { uu_desktop_idle_inhibitor_acquire(&mut error) };
let pointer = unsafe { if gnome { uu_desktop_idle_inhibitor_acquire(&mut error) } else { uu_desktop_screensaver_inhibitor_acquire(&mut error) } };
NonNull::new(pointer).map(Self).ok_or_else(|| super::error("idle inhibition", error))
}
@@ -37,6 +38,7 @@ mod native {
/// Set GNOME's display power-save mode to on. This does not unlock the session or change
/// lock-screen policy. Session-bus setup and each method call are bounded to three seconds.
pub fn wake() -> Result<(), String> {
if crate::privacy_screen::active() { return Ok(()); }
if !gnome_portal_active() {
return Ok(());
}
@@ -50,7 +52,9 @@ pub fn wake() -> Result<(), String> {
}
}
/// Holds a GNOME SessionManager idle-only inhibitor until dropped.
/// Holds an idle-only inhibitor until dropped: GNOME SessionManager on GNOME, the freedesktop
/// ScreenSaver interface on KDE (remote input through the portal does not count as activity
/// there, so the session locked mid-session, #61).
///
/// Acquire and drop perform blocking D-Bus work. Session-bus setup and each method call are
/// bounded to three seconds. Callers on an async runtime should move both operations to a
@@ -62,7 +66,8 @@ pub struct IdleInhibitor {
impl IdleInhibitor {
pub fn acquire() -> Result<Self, String> {
if !gnome_portal_active() {
let kde = portal_desktop_is("kde");
if !gnome_portal_active() && !kde {
return Ok(Self {
#[cfg(all(target_os = "linux", feature = "portal"))]
_handle: None,
@@ -70,7 +75,7 @@ impl IdleInhibitor {
}
#[cfg(all(target_os = "linux", feature = "portal"))]
{
native::Handle::acquire().map(|handle| Self { _handle: Some(handle) })
native::Handle::acquire(!kde).map(|handle| Self { _handle: Some(handle) })
}
#[cfg(not(all(target_os = "linux", feature = "portal")))]
{
@@ -79,10 +84,12 @@ impl IdleInhibitor {
}
}
fn gnome_portal_active() -> bool {
let gnome = std::env::var("XDG_CURRENT_DESKTOP").unwrap_or_default().split(':')
.any(|desktop| desktop.eq_ignore_ascii_case("gnome"));
gnome && crate::desktop_backend::detect().is_ok_and(|backend| backend == crate::desktop_backend::DesktopBackend::Portal)
fn gnome_portal_active() -> bool { portal_desktop_is("gnome") }
fn portal_desktop_is(name: &str) -> bool {
let matches = std::env::var("XDG_CURRENT_DESKTOP").unwrap_or_default().split(':')
.any(|desktop| desktop.eq_ignore_ascii_case(name));
matches && crate::desktop_backend::detect().is_ok_and(|backend| backend == crate::desktop_backend::DesktopBackend::Portal)
}
#[cfg(all(target_os = "linux", feature = "portal"))]
+8
View File
@@ -123,6 +123,14 @@ impl PortalDesktop {
|| state.screen.portal.as_ref().is_some_and(|portal| !portal.is_alive()));
}
pub fn snapshot(&self) -> State { self.state.borrow().clone() }
/// No desktop controller left: stop sharing the screen. begin() then sees the dead
/// session and the next controller's maintain() reopens it with the saved consent.
pub fn end_idle(&self) {
if let Some(portal) = self.snapshot().screen.portal.as_ref().filter(|portal| portal.is_alive()) {
portal.end();
log::info!("Portal screen sharing ended: no desktop controller");
}
}
pub fn subscribe(&self) -> watch::Receiver<State> { self.state.subscribe() }
pub fn lock_state(&self) -> watch::Receiver<Option<bool>> { self.locked.clone() }
#[cfg(test)]
+225
View File
@@ -0,0 +1,225 @@
//! `uuremote-server doctor`: one report with what an issue needs (session, backend, plugins,
//! input permission, encoders, config and service state), safe to paste publicly. It prints only
//! booleans, names and versions: no account ids, tokens, addresses, MACs or file contents, and the
//! home directory is shown as `~`.
fn redact(text: &str) -> String {
let mut out = text.to_owned();
if let Some(home) = std::env::var_os("HOME").and_then(|h| h.into_string().ok()).filter(|h| h.len() > 1) { out = out.replace(&home, "~"); }
if let Ok(user) = std::env::var("USER") { if user.len() > 2 { out = out.replace(&user, "<user>"); } }
out
}
fn env_state(name: &str) -> String {
match std::env::var(name) { Ok(v) if v.is_empty() => "set (empty)".into(), Ok(_) => "set".into(), Err(_) => "unset".into() }
}
fn line(key: &str, value: impl std::fmt::Display) { println!("{key:<22} {}", redact(&value.to_string())); }
fn format_probe(probe: &crate::video_select::ProbeReport) -> String {
let body = probe.order.iter().zip(probe.outcomes.iter())
.map(|(e, o)| format!("{}={}", format!("{e:?}").to_ascii_lowercase(), o.label()))
.collect::<Vec<_>>().join(" ");
if probe.expires_at.is_some() { format!("{body} (failure result, retried after 10 min)") } else { body }
}
fn glibc() -> String {
#[cfg(all(target_os = "linux", target_env = "gnu"))]
{
extern "C" { fn gnu_get_libc_version() -> *const libc::c_char; }
return unsafe { std::ffi::CStr::from_ptr(gnu_get_libc_version()) }.to_string_lossy().into_owned();
}
#[allow(unreachable_code)]
"n/a".into()
}
fn writable(path: &str) -> &'static str {
let Ok(c_path) = std::ffi::CString::new(path) else { return "invalid" };
if !std::path::Path::new(path).exists() { "missing" }
else if unsafe { libc::access(c_path.as_ptr(), libc::W_OK) } == 0 { "writable" } else { "no permission" }
}
async fn command_output(program: &str, args: &[&str]) -> Option<String> {
let output = tokio::time::timeout(std::time::Duration::from_secs(5),
tokio::process::Command::new(program).args(args).kill_on_drop(true).output()).await.ok()?.ok()?;
Some(String::from_utf8_lossy(&output.stdout).trim().to_owned())
}
/// Whether the report must say that this session has no screen to capture: neither DISPLAY nor
/// WAYLAND_DISPLAY is set, and the backend is the X11 one that needs a display to open.
fn missing_display(backend: crate::desktop_backend::DesktopBackend, headless: bool,
display: Option<&std::ffi::OsStr>, wayland: Option<&std::ffi::OsStr>) -> bool {
!headless && backend == crate::desktop_backend::DesktopBackend::X11
&& display.is_none() && wayland.is_none()
}
pub async fn run() -> Result<(), String> {
use crate::desktop_backend as backend;
use crate::engine_plugin::{load, Engine};
// Info logs (e.g. plugin paths under the home directory) would bypass the redaction below.
log::set_max_level(log::LevelFilter::Warn);
println!("uu-remote-linux doctor (safe to paste: no ids, tokens, addresses or file contents)");
line("version", format!("v{} {}", env!("CARGO_PKG_VERSION"), std::env::consts::ARCH));
line("glibc", glibc());
let os = std::fs::read_to_string("/etc/os-release").ok()
.and_then(|t| t.lines().find_map(|l| l.strip_prefix("PRETTY_NAME=").map(|v| v.trim_matches('"').to_owned())));
line("os", os.unwrap_or_else(|| "unknown".into()));
let features: Vec<&str> = [("wayland", cfg!(feature = "wayland")), ("portal", cfg!(feature = "portal")),
("engine-plugins", cfg!(feature = "engine-plugins")), ("inproc-av", cfg!(feature = "inproc-av"))]
.into_iter().filter(|(_, on)| *on).map(|(name, _)| name).collect();
line("build features", if features.is_empty() { "default (X11 only)".to_owned() } else { features.join(", ") });
println!("-- session");
line("XDG_SESSION_TYPE", std::env::var("XDG_SESSION_TYPE").unwrap_or_else(|_| "unset".into()));
line("XDG_CURRENT_DESKTOP", std::env::var("XDG_CURRENT_DESKTOP").unwrap_or_else(|_| "unset".into()));
line("DISPLAY", env_state("DISPLAY"));
line("WAYLAND_DISPLAY", env_state("WAYLAND_DISPLAY"));
line("wayland running", backend::wayland_session_running());
line("UU_DESKTOP_BACKEND", std::env::var("UU_DESKTOP_BACKEND").unwrap_or_else(|_| "auto".into()));
let selected = backend::detect();
line("selected backend", match &selected { Ok(b) if backend::headless() => format!("none (headless, {b:?} unused)"), Ok(b) => format!("{b:?}"), Err(e) => format!("error: {e}") });
if selected.as_ref().is_ok_and(|b| *b == backend::DesktopBackend::X11) && backend::wayland_session_running() && !backend::headless() {
println!(" ! X11 backend inside a Wayland session: the picture will be black");
}
// A session without any display cannot capture a screen; say so instead of naming a backend.
if let Ok(selected) = &selected {
if missing_display(*selected, backend::headless(), std::env::var_os("DISPLAY").as_deref(), std::env::var_os("WAYLAND_DISPLAY").as_deref()) {
println!(" ! DISPLAY and WAYLAND_DISPLAY are unset: the X11 engine will only try :0 and :1; without an X server there, no screen can be captured");
println!(" terminal, file transfer and port mapping still work; UU_DESKTOP_BACKEND=none marks the host as headless");
}
}
if cfg!(feature = "engine-plugins") {
for engine in [Engine::Wayland, Engine::Portal] {
line(engine.file(), match load(engine) { Ok(()) => "loaded".to_owned(), Err(e) => e });
}
}
println!("-- input");
line("/dev/uinput", writable("/dev/uinput"));
line("UU_INPUT_BACKEND", std::env::var("UU_INPUT_BACKEND").unwrap_or_else(|_| "auto".into()));
println!("-- video");
let selection = crate::video_select::selection();
let env_enc = std::env::var("UU_VIDEO_ENCODER").unwrap_or_else(|_| "unset".into());
let codec = match selection.codec_pref { crate::video_select::CodecPref::Auto => "auto", crate::video_select::CodecPref::H264 => "h264", crate::video_select::CodecPref::H265 => "h265" };
let probe_text = if selection.encoder_source == crate::video_select::Source::Auto {
format_probe(&crate::video::run_auto_probe().await)
} else {
crate::video_select::cached_probe().as_ref().map(format_probe).unwrap_or_else(|| "not yet run".to_owned())
};
let selection = if selection.encoder_source == crate::video_select::Source::Auto { crate::video_select::selection() } else { selection };
line("encoder probe", probe_text);
line("encoder", format!("{:?} (source={}; UU_VIDEO_ENCODER={env_enc})", selection.encoder, crate::video_select::encoder_source_label(selection.encoder_source)));
line("codec", format!("{codec} (source={})", crate::video_select::source_label(selection.codec_source)));
// Both codecs offered: hardware prefers H.265, CPU stays H.264 unless the preference forces one.
let resolved = crate::capture_setting::pick_codec(true, true, crate::video_select::codec_force(selection.codec_pref), crate::video_select::hardware(selection.encoder));
line("resolved codec", format!("{resolved:?}"));
match crate::video::ffmpeg_encoders().await {
Some(found) => line("ffmpeg encoders", if found.is_empty() { "none of libx264/libx265/nvenc/vaapi".to_owned() } else { found.join(", ") }),
None => line("ffmpeg encoders", "ffmpeg not runnable (install ffmpeg or set ffmpeg_root)"),
}
let mut version = crate::video::ffmpeg_command();
version.arg("-version").kill_on_drop(true);
if let Ok(Ok(output)) = tokio::time::timeout(std::time::Duration::from_secs(5), version.output()).await {
line("ffmpeg version", String::from_utf8_lossy(&output.stdout).lines().next().unwrap_or("").split_whitespace().nth(2).unwrap_or("unknown"));
}
line("nvidia driver", std::path::Path::new("/proc/driver/nvidia/version").exists());
line("render node", writable(&std::env::var("UU_VAAPI_DEVICE").unwrap_or_else(|_| "/dev/dri/renderD128".into())));
println!("-- audio");
for tool in ["pactl", "pw-cli"] {
line(tool, command_output("sh", &["-c", &format!("command -v {tool} >/dev/null && echo found || echo missing")]).await.unwrap_or_else(|| "unknown".into()));
}
println!("-- account and service");
let path = crate::config::path();
line("config", path.display());
match std::fs::metadata(&path) {
Ok(meta) => {
use std::os::unix::fs::PermissionsExt;
line("config mode", format!("{:o}", meta.permissions().mode() & 0o777));
// Presence only: never read values out of the file.
let fields: Option<serde_json::Value> = std::fs::read(&path).ok().and_then(|b| serde_json::from_slice(&b).ok());
let has = |key: &str| fields.as_ref().and_then(|v| v.get(key)).is_some_and(|v| !v.is_null() && v.as_str() != Some(""));
line("signed in", has("token") && has("user_id"));
line("device registered", has("device_id"));
}
Err(_) => line("config mode", "missing (run `uuremote-server login`)"),
}
line("service", command_output("systemctl", &["--user", "is-active", "uuremote-native.service"]).await.unwrap_or_else(|| "systemctl unavailable".into()));
let running = host_processes();
line("uuremote-server procs", format!("{} (including this one; more than 2 means duplicates)", running.map_or_else(|| "unknown".into(), |n| n.to_string())));
if running.is_some_and(|n| n > 2) {
println!(" ! another host instance is running (check `pgrep -af uuremote`); stop the extra one, e.g. an old copy started by hand");
println!(" instances sharing one identity, on this or another machine, kick each other out of the room: never copy config.json between machines");
}
Ok(())
}
/// Hosts re-exec through /proc/self/exe (comm "exe"), so match the executable's file name, not the process name.
/// Helpers a host spawns (Wayland capture, login window) are its children and are not separate instances.
fn host_processes() -> Option<usize> {
let hosts: Vec<(u32, u32)> = std::fs::read_dir("/proc").ok()?.flatten()
.filter_map(|entry| Some((entry.file_name().to_str()?.parse::<u32>().ok()?, entry.path())))
.filter(|(_, dir)| std::fs::read_link(dir.join("exe")).is_ok_and(|exe| is_host_executable(&exe)))
.filter_map(|(pid, dir)| Some((pid, parent_pid(&std::fs::read_to_string(dir.join("stat")).ok()?)?)))
.collect();
Some(top_level(&hosts))
}
/// Field 4 of /proc/<pid>/stat; the command name in field 2 may contain spaces and parentheses.
fn parent_pid(stat: &str) -> Option<u32> {
stat.rsplit_once(')')?.1.split_whitespace().nth(1)?.parse().ok()
}
fn top_level(hosts: &[(u32, u32)]) -> usize {
hosts.iter().filter(|(_, parent)| !hosts.iter().any(|(pid, _)| pid == parent)).count()
}
fn is_host_executable(exe: &std::path::Path) -> bool {
exe.file_name().and_then(|name| name.to_str()).is_some_and(|name| name.trim_end_matches(" (deleted)") == "uuremote-server")
}
#[cfg(test)]
mod tests {
#[test]
fn redaction_hides_home_and_user() {
let home = std::env::var("HOME").unwrap_or_default();
if home.len() > 1 { assert_eq!(super::redact(&format!("{home}/.config/x")), "~/.config/x"); }
assert_eq!(super::env_state("UU_DOCTOR_TEST_SURELY_UNSET"), "unset");
}
#[test]
fn a_session_without_any_display_is_reported() {
use crate::desktop_backend::DesktopBackend;
let display = std::ffi::OsStr::new(":0");
let wayland = std::ffi::OsStr::new("wayland-1");
// No DISPLAY and no WAYLAND_DISPLAY: nothing can be captured.
assert!(super::missing_display(DesktopBackend::X11, false, None, None));
// One of them present: the backend has a screen to open.
assert!(!super::missing_display(DesktopBackend::X11, false, Some(display), None));
assert!(!super::missing_display(DesktopBackend::X11, false, None, Some(wayland)));
// Another backend, or a headless host: not this warning.
assert!(!super::missing_display(DesktopBackend::Wayland, false, None, None));
assert!(!super::missing_display(DesktopBackend::X11, true, None, None));
}
#[test]
fn host_processes_match_the_executable_even_after_reexec() {
use std::path::Path;
for exe in ["/usr/bin/uuremote-server", "/home/u/.local/bin/uuremote-server", "/usr/bin/uuremote-server (deleted)"] {
assert!(super::is_host_executable(Path::new(exe)));
}
for exe in ["/usr/bin/uuremote-viewer", "/usr/bin/bash", "/usr/bin/uuremote-server-old"] {
assert!(!super::is_host_executable(Path::new(exe)));
}
}
#[test]
fn host_helpers_are_not_counted_as_instances() {
assert_eq!(super::parent_pid("8943 (exe) S 1699 8943 1699 0 -1"), Some(1699));
assert_eq!(super::parent_pid("12 (a) b (c) R 7 12"), Some(7));
// service 10 with a login window 11, a stale copy 20, doctor 30
assert_eq!(super::top_level(&[(10, 1), (11, 10), (20, 5), (30, 9)]), 3);
assert_eq!(super::top_level(&[(10, 1), (11, 10), (30, 9)]), 2);
}
}
+122
View File
@@ -0,0 +1,122 @@
//! Optional desktop engines loaded at runtime (`--features engine-plugins`).
//!
//! The Wayland (wlroots) and GNOME/KDE portal engines link libwayland/libxkbcommon and
//! GIO/PipeWire/libei. Linking them into `uuremote-server` would stop it from starting on X11 hosts
//! without those libraries, and libei is missing on older distributions. With engine-plugins they
//! are built as `libuu-wayland.so` / `libuu-portal.so`, shipped next to the binary, and opened with
//! dlopen only when the session needs them, so one release package serves every backend.
//! Without the feature the engines are linked statically as before and nothing here is used.
#![cfg_attr(not(feature = "engine-plugins"), allow(dead_code))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum Engine { Wayland, Portal }
impl Engine {
pub fn file(self) -> &'static str { match self { Self::Wayland => "libuu-wayland.so", Self::Portal => "libuu-portal.so" } }
fn index(self) -> usize { self as usize }
}
/// Directories searched for engine libraries, in order.
fn search_dirs() -> Vec<std::path::PathBuf> {
let mut dirs = Vec::new();
if let Some(dir) = std::env::var_os("UU_ENGINE_DIR").filter(|d| !d.is_empty()) { dirs.push(dir.into()); }
if let Some(exe_dir) = std::env::current_exe().ok().and_then(|exe| exe.parent().map(|d| d.to_path_buf())) {
dirs.push(exe_dir.join("../lib/uu-remote-linux"));
dirs.push(exe_dir.clone());
}
if let Some(home) = std::env::var_os("HOME") { dirs.push(std::path::Path::new(&home).join(".local/lib/uu-remote-linux")); }
dirs.extend(["/usr/local/lib/uu-remote-linux", "/usr/lib/uu-remote-linux"].map(std::path::PathBuf::from));
dirs
}
#[cfg(all(target_os = "linux", feature = "engine-plugins"))]
mod native {
use super::Engine;
use std::sync::OnceLock;
static HANDLES: [OnceLock<Result<usize, String>>; 2] = [OnceLock::new(), OnceLock::new()];
fn dlerror() -> String {
let message = unsafe { libc::dlerror() };
if message.is_null() { return "unknown dlopen error".into(); }
unsafe { std::ffi::CStr::from_ptr(message) }.to_string_lossy().into_owned()
}
fn open(engine: Engine) -> Result<usize, String> {
for dir in super::search_dirs() {
let path = dir.join(engine.file());
if !path.is_file() { continue; }
use std::os::unix::ffi::OsStrExt;
let Ok(c_path) = std::ffi::CString::new(path.as_os_str().as_bytes()) else { continue };
let handle = unsafe { libc::dlopen(c_path.as_ptr(), libc::RTLD_NOW | libc::RTLD_LOCAL) };
if handle.is_null() {
// Usually a missing system library (e.g. libei.so.1) or a too old glibc.
return Err(format!("{} could not be loaded: {}", path.display(), dlerror()));
}
log::info!("Desktop engine loaded: {}", path.display());
return Ok(handle as usize);
}
Err(format!("{} not found (looked next to uuremote-server, in ../lib/uu-remote-linux, ~/.local/lib/uu-remote-linux, /usr/lib/uu-remote-linux; UU_ENGINE_DIR overrides)", engine.file()))
}
pub fn load(engine: Engine) -> Result<(), String> {
HANDLES[engine.index()].get_or_init(|| open(engine)).as_ref().map(|_| ()).map_err(Clone::clone)
}
/// Address of `name` (NUL-terminated) in the engine, or 0 when the engine or symbol is missing.
pub fn symbol(engine: Engine, name: &'static str) -> usize {
let Ok(handle) = HANDLES[engine.index()].get_or_init(|| open(engine)) else { return 0 };
let address = unsafe { libc::dlsym(*handle as *mut libc::c_void, name.as_ptr().cast()) };
if address.is_null() { log::warn!("Desktop engine {} lacks {}", engine.file(), name.trim_end_matches('\0')); }
address as usize
}
}
/// Loads `engine`, or explains why it is unavailable. Always Ok when the engines are linked in.
pub fn load(engine: Engine) -> Result<(), String> {
#[cfg(all(target_os = "linux", feature = "engine-plugins"))]
{ native::load(engine) }
#[cfg(not(all(target_os = "linux", feature = "engine-plugins")))]
{ let _ = engine; Ok(()) }
}
#[cfg(all(target_os = "linux", feature = "engine-plugins"))]
pub use native::symbol;
/// Value returned by an engine call whose library could not be loaded (callers check `load` first).
pub trait Missing { fn missing() -> Self; }
impl Missing for () { fn missing() -> Self {} }
impl Missing for i32 { fn missing() -> Self { -1 } }
impl Missing for usize { fn missing() -> Self { 0 } }
impl<T> Missing for *mut T { fn missing() -> Self { std::ptr::null_mut() } }
/// Declares engine C functions: an `extern "C"` block when linked statically, or dlsym-resolved
/// wrappers with the same names and signatures with `engine-plugins`.
#[macro_export]
macro_rules! engine_ffi {
($engine:expr; $(fn $name:ident($($arg:ident: $ty:ty),* $(,)?) $(-> $ret:ty)?;)*) => {
#[cfg(not(feature = "engine-plugins"))]
extern "C" { $(fn $name($($arg: $ty),*) $(-> $ret)?;)* }
$(
#[cfg(feature = "engine-plugins")]
unsafe fn $name($($arg: $ty),*) $(-> $ret)? {
static ADDRESS: std::sync::OnceLock<usize> = std::sync::OnceLock::new();
let address = *ADDRESS.get_or_init(|| $crate::engine_plugin::symbol($engine, concat!(stringify!($name), "\0")));
if address == 0 { return $crate::engine_plugin::Missing::missing(); }
let function: unsafe extern "C" fn($($ty),*) $(-> $ret)? = unsafe { std::mem::transmute(address) };
unsafe { function($($arg),*) }
}
)*
};
}
#[cfg(test)]
mod tests {
#[test]
fn search_prefers_override_then_package_layout() {
let dirs = super::search_dirs();
let exe_dir = std::env::current_exe().unwrap().parent().unwrap().to_path_buf();
assert!(dirs.iter().position(|d| *d == exe_dir.join("../lib/uu-remote-linux")) < dirs.iter().position(|d| *d == exe_dir));
assert_eq!(dirs.last().unwrap(), std::path::Path::new("/usr/lib/uu-remote-linux"));
}
}
+57
View File
@@ -0,0 +1,57 @@
//! UI language: Chinese (the official clients' wording) or English.
//! `UU_LANG=zh|en`, else the choice saved from the settings window (`language` next to config.json),
//! else the locale (`LC_ALL` / `LC_MESSAGES` / `LANG` starting with `zh` → Chinese, anything else → English).
use std::sync::OnceLock;
static ENGLISH: OnceLock<bool> = OnceLock::new();
fn parse(value: &str) -> Option<bool> {
let value = value.trim().to_ascii_lowercase();
if value.starts_with("zh") { Some(false) } else if value.starts_with("en") { Some(true) } else { None }
}
fn saved_path() -> std::path::PathBuf {
crate::config::path().parent().map_or_else(|| "language".into(), |dir| dir.join("language"))
}
fn detect() -> bool {
if let Some(english) = std::env::var("UU_LANG").ok().as_deref().and_then(parse) { return english; }
if let Some(english) = std::fs::read_to_string(saved_path()).ok().as_deref().and_then(parse) { return english; }
let locale = ["LC_ALL", "LC_MESSAGES", "LANG"].iter()
.find_map(|name| std::env::var(name).ok().filter(|v| !v.is_empty()));
!locale.is_some_and(|v| v.to_ascii_lowercase().starts_with("zh"))
}
pub fn english() -> bool { *ENGLISH.get_or_init(detect) }
/// Pick the text for the current language.
pub fn s(zh: &'static str, en: &'static str) -> &'static str { if english() { en } else { zh } }
/// Saves the settings-window choice; it applies on the next start.
pub fn save(english: bool) -> std::io::Result<()> {
let path = saved_path();
if let Some(dir) = path.parent() { std::fs::create_dir_all(dir)?; }
std::fs::write(path, if english { "en\n" } else { "zh\n" })
}
/// `tr!("连接失败:{e}", "Connection failed: {e}")` formats the string for the current language.
#[macro_export]
macro_rules! tr {
($zh:literal, $en:literal $(, $arg:expr)* $(,)?) => {
if $crate::i18n::english() { format!($en $(, $arg)*) } else { format!($zh $(, $arg)*) }
};
}
// The GTK windows (c_engine/i18n.h) ask the same question so both halves always agree.
#[no_mangle] pub extern "C" fn uu_i18n_english() -> std::os::raw::c_int { english().into() }
#[no_mangle] pub extern "C" fn uu_i18n_save(english: std::os::raw::c_int) -> std::os::raw::c_int {
save(english != 0).is_ok().into()
}
#[cfg(test)] mod tests {
#[test] fn language_values_are_parsed(){
assert_eq!(super::parse("zh_CN.UTF-8"),Some(false));
assert_eq!(super::parse("EN\n"),Some(true));
assert_eq!(super::parse("sr_RS"),None);
}
}
Loaded 100 of 273 files, more files were not shown because too many files have changed in this diff. Show more